Research on smart city public health detection system and improvement technology based on intelligent multi-objective.

Introduction: With the increase of urban population density, urban sanitation becomes more severe; urban sanitation has important influence on public health. Therefore, in order to realize the detection of public health in smart cities, the research will use cutting-edge scientific and technological methods to improve urban environmental health, so as to promote the realization of public health achievements. This study introduces public health detection and optimizationtechnologies for smart cities. Methods: Firstly, a data detection system for urban public health environment was established using sensors and intelligent multi-objective technology to evaluate the water quality, air quality, and noise level of the city. Then, an intelligent garbage management system based on Tensor-flow was constructed to achieve efficient garbage collection and treatment. Finally, an intelligent traffic management system was developed to monitor and regulate urban traffic flow. Results: The results of the simulation experiment demonstrated that the life data detection system was operationally stable, with a high success rate of 98%. Furthermore, its accuracy in detecting residents' living environment data was above 95%, the maximum relative error was only 0.0465, making it a reliable and efficient tool. The waste recycling system achieved a minimum accuracy of 83.6%, the highest accuracy rate was 95.3%, making it capable of sorting and recycling urban waste effectively. Additionally, the smart traffic management system led to a 20% reduction in traffic congestion rates, 20 tonnes less tailpipe emissions and an improvement in public health and well-being. Discussion: In summary, the plan proposed in this study aims to create a more comfortable, safe, and healthy urban public health environment, while providing theoretical support for environmental health management in smart cities.

Microalgal biochar assisted simultaneous removal of particulate matter, formaldehyde, and total volatile organic compounds (TVOC's) from indoor air.

Biochar-based materials for air treatment have gained significant attention for removing health-detrimental volatile organic compounds (VOCs) and particulate matter (PM) in indoor air settings. However, high turnaround time, multiple pretreatment processes involved, and high pore size and low surface area (>10 µm, <100 m2 g-1) of lignocellulosic feedstocks demand alternative biochar feedstock material. Considering this, we designed a simple first-of-its-kind indoor air scrubbing material using diatoms-enriched microalgae biochar. In the present study, the microalgae were cultivated on waste anaerobic digestate (biogas slurry) and were pyrolyzed at three different temperatures: 300 °C (BC300), 500 °C (BC500), and 700 °C (BC700). The BC500 and BC700 showed the highest removal efficiencies (99 %) for total volatile organic carbons (TVOCs) and formaldehyde (HCHO) at concentrations of 1.22 mg m-3 HCHO and 8.57 mg m-3 TVOC compared to 50% efficiency obtained with commercially available surgical, cloth, and N95 masks. The biochar obtained showed a high Brunauer-Emmett-Teller (BET) surface area of 238 m2 g-1 (BC500) and 480 m2 g-1 (BC700) and an average pore size of 9-11 nm due to the mesoporous characteristic of diatom frustules. The comparatively poor performance of BC300 was due to lower surface area (150 m2 g-1) arising from incomplete organic removal, as evidenced by FESEM-EDX and FTIR. The high removal efficiencies in BC500 and BC700 were also attributed to the presence of reactive functional groups such as -OH and R-NH2. Concurrently, the average particulate matter (PM10, PM2.5, and PM1) removal efficiency for BC500 and BC 700 ranged between 66 and 82.69 %. The PM removal performance of BC500 and BC700 was lower (15-20%) than commercially available masks. Overall, the present study highlights the importance of diatoms (reactive Si) present inside the pores of microalgal biochar for enhanced removal of PM, TVOCs, and HCHO at temperatures above 500 °C. This complete approach signifies a step towards establishing a self-sustainable and circular process characterized by minimal waste generation for indoor air treatment.

Effects of COVID-19 on coastal and marine environments: Aggravated microplastic pollution, improved air quality, and future perspective.

The COVID-19 pandemic during 2020-2023 has wrought adverse impacts on coastal and marine environments. This study conducts a comprehensive review of the collateral effects of COVID-19 on these ecosystems through literature review and bibliometric analysis. According to the output and citation analysis of these publications, researchers from the coastal countries in Asia, Europe, and America payed more attentions to this environmental issue than other continents. Specifically, India, China, and USA were the top three countries in the publications, with the proportion of 19.55%, 18.99%, and 12.01%, respectively. The COVID-19 pandemic significantly aggravated the plastic and microplastic pollution in coastal and marine environments by explosive production and unproper management of personal protective equipment (PPE). During the pandemic, the estimated mismanaged PPE waste ranged from 16.50 t/yr in Sweden to 250,371.39 t/yr in Indonesia. In addition, the PPE density ranged from 1.13 × 10-5 item/m2 to 2.79 item/m2 in the coastal regions worldwide, showing significant geographical variations. Besides, the emerging contaminants released from PPE into the coastal and marine environments cannot be neglected. The positive influence was that the COVID-19 lockdown worldwide reduced the release of air pollutants (e.g., fine particulate matter, NO2, CO, and SO2) and improved the air quality. The study also analyzed the relationships between sustainable development goals (SDGs) and the publications and revealed the dynamic changes of SDGs in different periods the COVID-19 pandemic. In conclusion, the air was cleaner due to the lockdown, but the coastal and marine contamination of plastic, microplastic, and emerging contaminants got worse during the COVID-19 pandemic. Last but not least, the study proposed four strategies to deal with the coastal and marine pollution caused by COVID-19, which were regular marine monitoring, performance of risk assessment, effective regulation of plastic wastes, and close international cooperation.

Indoor sulfur dioxide prediction through air quality modeling and assessment of sulfur dioxide and nitrogen dioxide levels in industrial and non-industrial areas.

In this study, the levels of sulfur dioxide (SO2) and nitrogen dioxide (NO2) were measured indoors and outdoors using passive samplers in Tymar village (20 homes), an industrial area, and Haji Wsu (15 homes), a non-industrial region, in the summer and the winter seasons. In comparison to Haji Wsu village, the results showed that Tymar village had higher and more significant mean SO2 and NO2 concentrations indoors and outdoors throughout both the summer and winter seasons. The mean outdoor concentration of SO2 was the highest in summer, while the mean indoor NO2 concentration was the highest in winter in both areas. The ratio of NO2 indoors to outdoors was larger than one throughout the winter at both sites. Additionally, the performance of machine learning (ML) approaches: multiple linear regression (MLR), artificial neural network (ANN), and random forest (RF) were compared in predicting indoor SO2 concentrations in both the industrial and non-industrial areas. Factor analysis (FA) was conducted on different indoor and outdoor meteorological and air quality parameters, and the resulting factors were employed as inputs to train the models. Cross-validation was applied to ensure reliable and robust model evaluation. RF showed the best predictive ability in the prediction of indoor SO2 for the training set (RMSE = 2.108, MAE = 1.780, and R2 = 0.956) and for the unseen test set (RMSE = 4.469, MAE = 3.728, and R2 = 0.779) values compared to other studied models. As a result, it was observed that the RF model could successfully approach the nonlinear relationship between indoor SO2 and input parameters and provide valuable insights to reduce exposure to this harmful pollutant.

Modeling assessment of air pollution control measures and COVID-19 pandemic on air quality improvements over Greater Bay Area of China.

A remarkable progress has been made toward the air quality improvements over the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) of China from 2017 to 2020. In this study, for the first time, the emission reductions of regional control measures together with the COVID-19 pandemic were considered simultaneously into the development of the GBA's emission inventories for the years of 2017 and 2020. Based on these collective emission inventories, the impacts of control measures, meteorological variations together with temporary COVID-19 lockdowns on the five major air quality index pollutants (SO2, NO2, PM2.5, PM10, and O3, excluding CO) were evaluated using the WRF-CMAQ and SMAT-CE model attainment assessment tool over the GBA region. Our results revealed that control measures in the Pearl River Delta (PRD) region affected significantly the GBA, resulting in pollutant reductions ranging from 48 % to 64 %. In contrast, control measures in Hong Kong and Macao contributed to pollutant reductions up to 10 %. In PRD emission sectors, stationary combustion, on-road, industrial processes and dust sectors stand out as the primary contributors to overall air quality improvements. Moreover, the COVID-19 pandemic during period I (Jan 23-Feb 23) led to a reduction of NO2 concentration by 7.4 %, resulting in a negative contribution (disbenefit) for O3 with an increase by 2.4 %. Our findings highlight the significance of PRD control measures for the air quality improvements over the GBA, emphasizing the necessity of implementing more refined and feasible manageable joint prevention and control policies.

Substantially reducing global PM2.5-related deaths under SDG3.9 requires better air pollution control and healthcare.

The United Nations' Sustainable Development Goal (SDG) 3.9 calls for a substantial reduction in deaths attributable to PM2.5 pollution (DAPP). However, DAPP projections vary greatly and the likelihood of meeting SDG3.9 depends on complex interactions among environmental, socio-economic, and healthcare parameters. We project potential future trends in global DAPP considering the joint effects of each driver (PM2.5 concentration, death rate of diseases, population size, and age structure) and assess the likelihood of achieving SDG3.9 under the Shared Socioeconomic Pathways (SSPs) as quantified by the Scenario Model Intercomparison Project (ScenarioMIP) framework with simulated PM2.5 concentrations from 11 models. We find that a substantial reduction in DAPP would not be achieved under all but the most optimistic scenario settings. Even the development aligned with the Sustainability scenario (SSP1-2.6), in which DAPP was reduced by 19%, still falls just short of achieving a substantial (≥20%) reduction by 2030. Meeting SDG3.9 calls for additional efforts in air pollution control and healthcare to more aggressively reduce DAPP.

Outdoor fine particulate matter exposure and telomere length in humans: A systematic review and meta-analysis.

Although the association between changes in human telomere length (TL) and ambient fine particulate matter (PM2.5) has been documented, there remains disagreement among the related literature. Our study conducted a systematic review and meta-analysis of epidemiological studies to investigate the health effects of outdoor PM2.5 exposure on human TL after a thorough database search. To quantify the overall effect estimates of TL changes associated with every 10 µg/m3 increase in PM2.5 exposure, we focused on two main topics, which were outdoor long-term exposure and prenatal exposure of PM2.5. Additionally, we included a summary of short-term PM2.5 exposure and its impact on TL due to limited data availability. Our qualitative analysis included 20 studies with 483,600 participants. The meta-analysis showed a statistically significant association between outdoor PM2.5 exposure and shorter human TL, with pooled impact estimates (ß) of -0.12 (95% CI: -0.20, -0.03, I2= 95.4%) for general long-term exposure and -0.07 (95% CI: -0.15, 0.00, I2= 74.3%) for prenatal exposure. In conclusion, our findings suggest that outdoor PM2.5 exposure may contribute to TL shortening, and noteworthy associations were observed in specific subgroups, suggesting the impact of various research variables. Larger, high-quality studies using standardized methodologies are necessary to strengthen these conclusions further.

[Impacts of Anthropogenic Emission Reduction on Urban Atmospheric Oxidizing Capacity During the COVID-19 Lockdown].

In recent years， regional compound air pollution events caused by fine particles （PM2.5） and ozone （O3） have occurred frequently in economically developed areas of China， in which atmospheric oxidizing capacity （AOC） has played an important role. In this study， the WRF-CMAQ model was used to study the impacts of anthropogenic emission reduction on AOC during the COVID-19 lockdown period. Three representative cities in eastern China （Shijiazhuang， Nanjing， and Guangzhou） were selected for an in-depth analysis to quantify the contribution of meteorology and emissions to the changes in AOC and oxidants and to discuss the impact of AOC changes on the formation of secondary pollutants. The results showed that， compared with that in the same period in 2019， the urban average AOC in Shijiazhuang， Nanjing， and Guangzhou in 2020 increased by 60%， 48.7%， and 12.6%， respectively. The concentrations of O3， hydroxyl radical （·OH）， and nitrogen trioxide （NO3·ï¼‰ increased by 1.6%-26.4%， 14.8%-73.3%， and 37.9%-180%， respectively. The AOC in the three cities increased by 0.06×10-4， 0.12×10-4， and 0.33×10-4 min-1， respectively， due to emission reduction. The meteorological change increased AOC in Shijiazhuang and Nanjing by 20% and 17.9%， respectively， but decreased AOC in Guangzhou by -9.3%. Enhanced AOC led to an increase in the nitrogen oxidation ratio （NOR） and VOCs oxidation ratio （VOR） and promoted the transformation of primary pollutants to secondary pollutants. This offset the effects of primary emission reduction and resulted in a nonlinear decline in secondary pollutants compared to emissions during the COVID-19 lockdown.

Short-term exposure to air pollution and hospital admission after COVID-19 in Catalonia: the COVAIR-CAT study.

BACKGROUND: A growing body of evidence has reported positive associations between long-term exposure to air pollution and poor COVID-19 outcomes. Inconsistent findings have been reported for short-term air pollution, mostly from ecological study designs. Using individual-level data, we studied the association between short-term variation in air pollutants [nitrogen dioxide (NO2), particulate matter with a diameter of <2.5 µm (PM2.5) and a diameter of <10 µm (PM10) and ozone (O3)] and hospital admission among individuals diagnosed with COVID-19. METHODS: The COVAIR-CAT (Air pollution in relation to COVID-19 morbidity and mortality: a large population-based cohort study in Catalonia, Spain) cohort is a large population-based cohort in Catalonia, Spain including 240 902 individuals diagnosed with COVID-19 in the primary care system from 1 March until 31 December 2020. Our outcome was hospitalization within 30 days of COVID-19 diagnosis. We used individual residential address to assign daily air-pollution exposure, estimated using machine-learning methods for spatiotemporal prediction. For each pandemic wave, we fitted Cox proportional-hazards models accounting for non-linear-distributed lagged exposure over the previous 7 days. RESULTS: Results differed considerably by pandemic wave. During the second wave, an interquartile-range increase in cumulative weekly exposure to air pollution (lag0_7) was associated with a 12% increase (95% CI: 4% to 20%) in COVID-19 hospitalizations for NO2, 8% (95% CI: 1% to 16%) for PM2.5 and 9% (95% CI: 3% to 15%) for PM10. We observed consistent positive associations for same-day (lag0) exposure, whereas lag-specific associations beyond lag0 were generally not statistically significant. CONCLUSIONS: Our study suggests positive associations between NO2, PM2.5 and PM10 and hospitalization risk among individuals diagnosed with COVID-19 during the second wave. Cumulative hazard ratios were largely driven by exposure on the same day as hospitalization.

Relationship between negative air ion and PM2.5 in Quercus variabilis under natural conditions.

In recent years, PM2.5 pollution has become a most important source of air pollution. Prolonged exposure to high PM2.5 concentrations can give rise to severe health issues. Negative air ion (NAI) is an important indicator for measuring air quality, which is collectively known as the 'air vitamin'. However, the intricate and fluctuating meteorological conditions and vegetation types result in numerous uncertainties in the correlation between PM2.5 and NAI. In this study, we collected data on NAI, PM2.5, and meteorological elements through positioning observation during the period of June to September in 2019 and 2020 under the condition of relatively constant leaf area in Quercus variabilis forest, a typical forest in warm temperate zones. We investigated the spatiotemporal variation of PM2.5 and NAI under consistent meteorological conditions, established the correlation between PM2.5 and NAI, and explicated the impact mechanism of PM2.5 on NAI in natural conditions. The results showed that NAI decreased exponentially with the increases in natural PM2.5, with a significant negative correlation (y=1148.79x-0.123). The decrease rates of NAI in PM2.5 concentrations of 0-20, 20-40, 40-80, 80-100 and 100-120 µg·m-3 were 40.1%, 36.2%, 9.4%, 2.4%, 5.1% and 6.8%, respectively. Results of the sensitivity analysis showed that the PM2.5 concentration range of 0-40 µg·m-3 was the sensitive range that affected NAI. Our findings could provide a scientific basis for better understanding the response mechanisms of NAI to environmental factors.

Viral infection transmission and indoor air quality: A systematic review.

Respiratory disease transmission in indoor environments presents persistent challenges for health authorities, as exemplified by the recent COVID-19 pandemic. This underscores the urgent necessity to investigate the dynamics of viral infection transmission within indoor environments. This systematic review delves into the methodologies of respiratory infection transmission in indoor settings and explores how the quality of indoor air (IAQ) can be controlled to alleviate this risk while considering the imperative of sustainability. Among the 2722 articles reviewed, 178 were retained based on their focus on respiratory viral infection transmission and IAQ. Fifty eight articles delved into SARS-CoV-2 transmission, 21 papers evaluated IAQ in contexts of other pandemics, 53 papers assessed IAQ during the SARS-CoV-2 pandemic, and 46 papers examined control strategies to mitigate infectious transmission. Furthermore, of the 46 papers investigating control strategies, only nine considered energy consumption. These findings highlight clear gaps in current research, such as analyzing indoor air and surface samples for specific indoor environments, oversight of indoor and outdoor parameters (e.g., temperature, relative humidity (RH), and building orientation), neglect of occupancy schedules, and the absence of considerations for energy consumption while enhancing IAQ. This study distinctly identifies the indoor environmental conditions conducive to the thriving of each respiratory virus, offering IAQ trade-offs to mitigate the risk of dominant viruses at any given time. This study argues that future research should involve digital twins in conjunction with machine learning (ML) techniques. This approach aims to enhance IAQ by analyzing the transmission patterns of various respiratory viruses while considering energy consumption.

Phenylmethylsiloxanes in indoor dust from residential area of China: Source, occurrence, bioavailability and exposure assessment.

Phenylmethylsiloxanes, as modified products of dimethylsiloxanes, have been used in personal care products (PCPs) and household appliances, with indoor dust serving as one potential reservoir due to their particle-binding properties. This study measured six isomers of two phenylmethylsiloxanes (P3 and P4) in PCPs (99 %) intakes of phenylmethylsiloxanes for adults, while dust ingestion/adsorption (0.19 ng/d) may play important roles for toddlers/infants with little usage of phenylmethylsiloxanes-containing PCPs. Additionally, total daily intakes of PhMeSi(OH)2 (0.30-0.84 ng/d) via ingestion and dermal absorption of dust were higher than P3 (0.06-0.31 ng/d) and P4 (0.02-0.09 ng/d), suggesting exposure risk of degradation product of phenylmethylsiloxanes deserving attention.

Turbid Waters and Clearer Standards: Refining Water Quality Criteria for Coastal Environments by Encompassing Metal Bioavailability from Suspended Particles.

Suspended particulate matter (SPM) carries a major fraction of metals in turbid coastal waters, markedly influencing metal bioaccumulation and posing risks to marine life. However, its effects are often overlooked in current water quality criteria for metals, primarily due to challenges in quantifying SPM's contribution. This contribution depends on the SPM concentration, metal distribution coefficients (Kd), and the bioavailability of SPM-bound metals (assimilation efficiency, AE), which can collectively be integrated as a modifying factor (MF). Accordingly, we developed a new stable isotope method to measure metal AE by individual organisms from SPM, employing the widely distributed filter-feeding clam Ruditapes philippinarum as a representative species. Assessing SPM from 23 coastal sites in China, we found average AEs of 42% for Zn, 26% for Cd, 20% for Cu, 8% for Ni, and 6% for Pb. Moreover, using stable isotope methods, we determined metal Kd of SPM from these sites, which can be well predicted by the total organic carbon and iron content (R2 = 0.977). We calculated MFs using a Monte Carlo method. The calculated MFs are in the range 9.9-43 for Pb, 8.5-37 for Zn, 2.9-9.7 for Cu, 1.4-2.7 for Ni, and 1.1-1.6 for Cd, suggesting that dissolved-metal-based criteria values should be divided by MFs to provide adequate protection to aquatic life. This study provides foundational guidelines to refine water quality criteria in turbid waters and protect coastal ecosystems.

Quantifying the contributions of road and air traffic to ambient ultrafine particles in two urban communities.

Traffic-related activities are widely acknowledged as a primary source of urban ambient ultrafine particles (UFPs). However, a notable gap exists in quantifying the contributions of road and air traffic to size-resolved and total UFPs in urban areas. This study aims to delineate and quantify the traffic's contributions to size-resolved and total UFPs in two urban communities. To achieve this, stationary sampling was conducted at near-road and near-airport communities in Seattle, Washington State, to monitor UFP number concentrations during 2018-2020. Comprehensive correlation analyses among all variables were performed. Furthermore, a fully adjusted generalized additive model, incorporating meteorological factors, was developed to quantify the contributions of road and air traffic to size-resolved and total UFPs. The study found that vehicle emissions accounted for 29% of total UFPs at the near-road site and 13% at the near-airport site. Aircraft emissions contributed 14% of total UFPs at the near-airport site. Notably, aircraft predominantly emitted UFP sizes below 20 nm, while vehicles mainly emitted UFP sizes below 50 nm. These findings reveal the variability in road and air traffic contributions to UFPs in distinct areas. Our study emphasizes the pivotal role of traffic layout in shaping urban UFP exposure.

Bangkok school indoor air quality: monitoring and intervention by positive pressure fresh air system.

A PM2.5 crisis in Thailand has caused the Thai government and public to be increasingly concerned about children's exposure to PM2.5 during time in school. This study is a part of a project to create a modeled effective school indoor air quality management for the Bangkok Metropolitan Administration (BMA). We measured air quality and environment in 10 Bangkok school rooms, including CO2, CO, O3, PM2.5, PM10, TVOCPID, formaldehyde, airborne bacteria and fungi, and gaseous organic contaminants. The indoor-to-outdoor concentration ratios indicated that either outdoor sources or indoor + outdoor sources were the predominant contributors to PM in naturally ventilated classrooms. Meanwhile, PM levels in air-conditioned classrooms strongly depended on class activities. CO2 measurements showed that the air-conditioned classrooms had a low 0.4 per hour air change rate and total fungal counts also reached 800 CFU m-3. Analysis of gaseous organic compounds showed that the two most abundant were aliphatic and aromatic hydrocarbons, accounting for 60% by mass concentration. Interestingly, 2-ethyl-1-hexanol, a mucous membrane irritant, was detected in all study rooms. In one naturally ventilated classroom, we implemented a positive pressure fresh air system to mitigate in-class PM levels; it kept PM levels below 20 µg m-3 throughout the class day. Students reported a 20-37% increase in satisfaction with the perceived indoor environmental quality and reported reduced rates in all symptoms of the sick building syndrome after implementing the positive pressure system.

Influence of anthropogenic activities on metals, sugars and PAHs in PM10 in the city of Fez, Morocco: Implications on air quality.

Particulate matter (PM) is an important component in the atmosphere, affecting air quality, health, radiation balance, and global climate. To assess regional air quality in the city of Fez, an intensive field campaign was carried out in the autumn of 2019 in the Middle Atlas region of Morocco. Aerosol sampling was performed simultaneously at two urban sites in the city of Fez: (1) Fez University (FU), a sub-urban site, and (2) Fez Parc (FP), an urban site located in the city center of Fez, using PM10 collectors. Various laboratory analyses were carried out, including PM mass, trace metals, inorganic ions, OC/EC, sugar compounds, and PAHs. The results indicate that the PM10 mass (61 ng m-3) was comparable at both sites, with a 37-107 ng m-3 range. Most of the 19 investigated PAHs at the FU site (10.2 ± 6.2 ng m-3) were low-molecular-weight PAHs, while the most abundant PAHs at the FP site (6.9 ± 3.8 ng m-3) were mainly higher-molecular-weight PAHs. A diagnostic ratio analysis at both sites indicated that PAHs originated from fossil fuel combustion and traffic emissions from diesel engines, with Ant/(Ant + Phe) and Flu/(Flu + Pyr) ratios averaging 0.22 and 0.84, respectively. PMF analysis identified traffic emissions as a major source (30%), with secondary inorganic aerosols (20%) and biomass burning (14%). Polar plots highlight the dominance of local anthropogenic activities in PM pollution, with vehicular emissions, industrial activities, and biomass burning. This study shows that local sources and combustion processes significantly contribute to PM10 sources in Morocco, providing insights into air pollution mitigation in North Africa.

Windows of sensitivity for risk of adverse birth outcomes related to gestational PM2.5 exposure: Evidence from a natural experiment.

While numerous studies have associated maternal exposure to PM2.5 with adverse birth outcomes, findings remain inconsistent and difficult to generalize. We aimed to investigate the causal relationship and window of sensitivity between gestational exposure to PM2.5 and birth outcomes. We leveraged high-resolution satellite data to quantify gestational PM2.5 exposure at the individual level, along with a combined model to determine daily relative risks (RRs) of birth outcomes in COVID-19 prelockdown and lockdown groups. RRs between the two groups were further compared using a longitudinal pre-post non-experimental design to identify sensitivity windows of adverse birth outcomes. A total of 73,781 pregnant women from the COVID-19 prelockdown group and 6267 pregnant women from the lockdown group were included for analysis. The daily mean PM2.5 concentrations in the lockdown group decreased by 21.7% compared to the prelockdown group. During the first trimester, every 10 µg/m3 increase in PM2.5 significantly increased the risk of congenital abnormalities of major organs such as the cardiovascular system, gastrointestinal tract, nervous system, urinary system, and respiratory system. Moreover, gestational exposure to PM2.5 during the first trimester was associated with higher risks of premature delivery and term low birth weight. While PM2.5 exposure during the second trimester was positively correlated with macrosomia. Gestational exposure to PM2.5 is associated with increased risks of various adverse birth outcomes with specific sensitive windows. We demonstrated that gestational exposure to PM2.5 increased risks of various adverse birth outcomes with specific window of sensitivity through the natural experiment design. Our findings underscore the urgent need for policies and initiatives targeting PM2.5 reduction, especially during critical periods of pregnancy.

Ozone and its precursors at an urban site in the Yangtze River Delta since clean air action plan phase II in China.

In response to regional ozone (O3) pollution, Chinese government has implemented air pollution control measures in recent years. Here, a case study was performed at an O3-polluted city, Wuhu, in Yangtze River Delta region of China to investigate O3 variation trend and the relationship to its precursors after implementation of Clean Air Action Plan Phase II, which aims to reduce O3 pollution. The results showed that peak O3 concentration was effectively reduced since Clean Air Action Plan Phase II. Due to significant NOx reduction, O3 formation tended to shift from volatile organic compound (VOC)-limited regimes to NOx-limited regimes during 2018-2022. VOC/NOx ratios measured in 2022 revealed that peak O3 concentration tended to respond positively to NOx. Apart from high-O3 period, Wuhu was still in a VOC-limited regime. The relationship of maximum daily 8-h ozone average and NO2 followed a lognormal distribution with an inflection point at 20 µg m-3 of NO2, suggesting that Wuhu should conduct joint control of VOC and NOx with a focus on VOC reduction before the inflection point. Alkenes and aromatics were suggested to be preferentially controlled due to their higher ozone formation potentials. Using random forest meteorological normalization method, meteorology had a positive effect on O3 concentration in 2018, 2019 and 2022, but a negative effect in 2020 and 2021. The meteorology could explain 44.0 ± 19.1% of the O3 variation during 2018-2022. High temperature favors O3 production and O3 pollution occurred more easily when temperature was over 25 °C, while high relative humidity inhibits O3 generation and no O3 pollution was found at relative humidity above 70%. This study unveils some new insights into the trend of urban O3 pollution in Yangtze River Delta region since Clean Air Action Plan Phase II and the findings provide important references for formulating control strategies against O3 pollution.

Long-term ambient air pollution and the risk of musculoskeletal diseases: A prospective cohort study.

Evidence of the associations of air pollution and musculoskeletal diseases is inconsistent. This study aimed to examine the associations between air pollutants and the risk of incident musculoskeletal diseases, such as degenerative joint diseases (n = 38,850) and inflammatory arthropathies (n = 20,108). An air pollution score was constructed to assess the combined effect of PM2.5, PM2.5-10, NO2, and NOX. Cox proportional hazard model was applied to assess the relationships between air pollutants and the incidence of each musculoskeletal disease. The air pollution scores exhibited the modest association with an increased risk of osteoporosis (HR = 1.006, 95% CI: 1.002-1.011). Among the individual air pollutants, PM2.5 and PM2.5-10 exhibited the most significant effect on elevated risk of musculoskeletal diseases, such as PM2.5 on osteoporosis (HR = 1.064, 95% CI: 1.020-1.110), PM2.5-10 on inflammatory arthropathies (HR = 1.059, 95% CI: 1.037-1.081). Females were found to have a higher risk of incident musculoskeletal diseases when exposed to air pollutants. Individuals with extreme BMI or lower socioeconomic status had a higher risk of developing musculoskeletal diseases. Our findings reveal that long-term exposure to ambient air pollutants may contribute to an increased risk of musculoskeletal diseases.