[Effects of Application of Different Organic Materials on Phosphorus Accumulation and Transformation in Vegetable Fields].

Presently, the improvement of soil organic matter is the basis to ensure food security, but the accumulation and transformation characteristics of soil phosphorus (P) as affected by organic matter remain unclear. The accumulation, transformation, and migration characteristics of soil P in different soil layers of vegetable fields were researched under the application of organic materials. Six treatments were set up in the experiment:control (no fertilization), traditional fertilizer application by farmers, biochar, chicken manure, food waste, and straw application. Available phosphorus (Olsen-P), water-soluble phosphorus (CaCl2-P) content, soil phosphorus forms, soil organic matter (SOM), and pH were determined during the pepper harvest period. In the 0-5 cm and 5-10 cm soil layers, the available phosphorus content of traditional fertilization of farmers was higher, and the available phosphorus content of the four organic materials was in the order of straw > biochar > chicken manure > food waste. Compared to that with food waste, the straw and biochar treatments increased soil available phosphorus by 59.6%-67.3% and 29.1%-36.9%, respectively. The straw treatment could easily enhance the soil labile P pool, and soil labile P in the 0-5 cm soil layer increased by 47.3% and 35.1% compared with that under the chicken manure and food waste treatments, respectively. With the increase in soil depth, the proportion of available phosphorus in the chicken manure treatment decreased the least, and available phosphorus of the 20-30 cm soil layer accounted for 55.9% of the topsoil layer but only accounted for 16.0%-34.0% under treatment with the other three materials. Compared with that under the traditional fertilization of farmers, the pH significantly increased by 0.18-0.36 units after the application of organic fertilizer, and the pH of the chicken manure and food waste treatments was significantly higher than that of biochar and straw (P < 0.05). SOM content under the biochar treatment significantly increased by 7.7%-17.6% compared to that under the other three organic materials. Among the four organic materials, the straw treatment boosted the labile P pool the most, which was conducive to the rapid increase in plant-available P. Phosphorus was most likely to migrate downward under the chicken manure treatment. In the field management based on soil fertility enhancement, the application of biochar could not only improve soil pH and SOM but also avoid excessive accumulation of phosphorus in the surface layer, which decreases environmental risks.

Comprehensive characterization of unscientifically disposed municipal solid waste (MSW) in Kashmir Region, India.

Unscientific dumping of municipal solid waste (MSW) is a common practice in Kashmir. To have an environmentally friendly and sustainable waste management system, MSW was collected from nine study locations of this region. They were air-dried, then oven-dried at 105 °C for 24 h, segregated, and characterized for various components. The overall average organic waste was > 55%, plastic waste about 17%, inert material about 10%, paper 9%, and cloth waste 7%. The calorific value of paper and plastic wastes exhibited was 4910 kcal/kg, while organic waste had a calorific value of 1980 kcal/kg. The proximate analysis showed that the moisture content ranged from 16 to 29%, volatile matter ranged from 49 to 72%, ash content ranged from 0.03 to 5%, and fixed carbon ranged from 5 to 20%. In S7, the volatile matter content recorded the lowest value at 49.15%, while in S5, the volatile matter content was notably higher at 71.84%, indicating easier ignition. Further, elemental analysis revealed that the major elements in MSW were carbon and oxygen, 53% and 37%, respectively, with small traces of heavy metals with an average of 0.02% cadmium (Cd) and 0.006% lead (Pb). Moreover, field emission scanning electron microscopy (FESEM) micrographs provided confirmation that the majority of components in the MSW exhibited either partial or complete degradation, resulting in a rough surface texture. In addition, the presence of silica and other silicate groups was also detected. Fourier transform infrared spectroscopy (FT-IR) analysis revealed that the main functional groups were alcohol. In the X-ray diffraction (XRD) analysis, all the major mineral phases were detected between 20 and 30° 2θ, except for the peaks at 50-60° 2θ in S3 and S9 where catalysts such as zeolite Y and zeolite X were detected. Overall, the MSW had low moisture content but higher calorific value, making it a viable feedstock.

Emission characteristics of condensable particulate matter during the production of solid waste-based sulfoaluminate cement: Compositions, heavy metals, and preparation impacts.

Recycling solid waste for preparing sulfoaluminate cementitious materials (SACM) represents a promising approach for low-carbon development. There are drastic physical-chemical reactions during SACM calcination. However, there is a lack of research on the flue gas pollutants emissions from this process. Condensable particulate matter (CPM) has been found to constitute the majority of the primary PM emitted from various fuel combustion. In this study, the emission characteristics of CPM during the calcination of SACM were determined using tests in both a real-operated kiln and laboratory experiments. The mass concentration of CPM reached 96.6 mg/Nm3 and occupied 87% of total PM emission from the SACM kiln. Additionally, the mass proportion of SO42- in the CPM reached 93.8%, thus indicating that large quantities of sulfuric acid mist or SO3 were emitted. CaSO4 was one key component for the formation of main mineral ye'elimite (3CaO·3Al2O3·CaSO4), and its decomposition probably led to the high SO42- emission. Furthermore, the use of CaSO4 as a calcium source led to SO42- emission factor much higher than conventional calcium sources. Higher calcination temperature and more residence time also increased SO42- emission. The most abundant heavy metal in kiln flue gas and CPM was Zn. However, the total condensation ratio of heavy metals detected was only 40.5%. CPM particles with diameters below 2.5 µm and 4-20 µm were both clearly observed, and components such as Na2SO4 and NaCl were conformed. This work contributes to the understanding of CPM emissions and the establishment of pollutant reduction strategies for waste collaborative disposal in cement industry.

Analysis of composition characteristics and treatment techniques of municipal solid waste incineration fly ash in China.

The rapid development of the economy and society is causing an increase in the amount of municipal solid waste (MSW) produced by people's daily lives. With the strong support of the Chinese government, incineration power generation has steadily become the primary method of treating MSW, accounting for 79.86%. However, burning produces a significant amount of municipal solid waste incineration fly ash (MSWI-FA), which contains heavy metals, soluble chlorine salts, and dioxins. China's MSWI-FA yield increased by 8.23% annually to 7.80 million tons in 2022. Besides, the eastern region, especially the southeastern coastal region, has the highest yield of MSWI-FA. There are certain similarities in the chemical characteristics of MSWI-FA samples from Northeast, North, East, and South China. Zn and CaO have the largest amounts of metals and oxides, respectively. The Cl content is about 20 wt%. This study provides an overview of the techniques used in the thermal treatment method, solidification and stabilization, and separation and extraction of MSWI-FA and compares their benefits and drawbacks. In addition, the industrial applications and standard requirements of landfill treatment and resource utilization of MSWI-FA in China are analyzed. It is discovered that China's resource utilization of MSWI-FA is insufficient through the study on the fly ash disposal procedures at a few MSW incineration facilities located in the economically developed Guangdong Province and the traditional industrial city of Tianjin. Finally, the prospects for the disposal of MSWI-FA were discussed.

Compression stress-strain curve of lithium slag recycled fine aggregate concrete.

As one of the key materials used in the civil engineering industry, concrete has a global annual consumption of approximately 10 billion tons. Cement and fine aggregate are the main raw materials of concrete, and their production causes certain harm to the environment. As one of the countries with the largest production of industrial solid waste, China needs to handle solid waste properly. Researchers have proposed to use them as raw materials for concrete. In this paper, the effects of different lithium slag (LS) contents (0%, 10%, 20%, 40%) and different substitution rates of recycled fine aggregates (RFA) (0%, 10%, 20%, 30%) on the axial compressive strength and stress-strain curve of concrete are discussed. The results show that the axial compressive strength, elastic modulus, and peak strain of concrete can increase first and then decrease when LS is added, and the optimal is reached when the LS content is 20%. With the increase of the substitution rate of RFA, the axial compressive strength and elastic modulus of concrete decrease, but the peak strain increases. The appropriate amount of LS can make up for the mechanical defects caused by the addition of RFA to concrete. Based on the test data, the stress-strain curve relationship of lithium slag recycled fine aggregate concrete is proposed, which has a high degree of agreement compared with the test results, which can provide a reference for practical engineering applications. In this study, LS and RFA are innovatively applied to concrete, which provides a new way for the harmless utilization of solid waste and is of great significance for the control of environmental pollution and resource reuse.

Absorbent hygiene products disposal behaviour in informal settlements: identifying determinants and underlying mechanisms in Durban, South Africa.

BACKGROUND: Within South Africa, many low-income communities lack reliable waste management services. Within these contexts, absorbent hygiene product (AHP) waste, including nappies (diapers), are not recycled, and are often dumped, ending up in watercourses and polluting the local environment. The structural barriers to collection which have been well explored, however the behavioural determinants of safe disposal for AHPs remains poorly understood. The purpose of this study is to determine the psycho-social factors driving AHP disposal behaviour for caregivers, while identifying potential underlying mechanisms (such as mental health), which may be influencing disposal behaviour, with the intention of informing a future, contextually appropriate and sustainable, collection system. METHODS: The cross-sectional study was conducted within three low-income communities located within eThekwini Municipality (Durban), South Africa. The study included a pre-study and a quantitative survey of 452 caregivers, utilising the RANAS approach of behaviour change. The quantitative questionnaire was based on the RANAS model to measure psycho-social factors underlying sanitary disposal of AHPs. Mental health was assessed using the Self-Reporting Questionnaire (SRQ-20). Statistical analysis involved regressing psycho-social factors onto disposal behaviour and exploring their interaction with mental health through a moderation model. RESULTS: Our findings suggest that one third of caregivers do not dispose of nappies sanitarily, despite intent (86.9%). Regression analysis revealed ten psycho-social factors which significantly predict the desired behavioural outcome, the sanitary disposal of AHPs. Caregivers with poor mental health were less likely to dispose of AHP sanitarily, which reflects previous research linking poor mental health and the impairment of health-related daily activities, particularly within vulnerable groups. Specifically, several psycho-social factors underlying were moderated by poor mental health, the prevalence of sanitary disposal of AHPs depended on mental condition of caregiver. CONCLUSIONS: Our findings confirmed the link between poor mental health and unsanitary AHPs disposal. This is especially relevant because poor mental health is common within South Africa. Addressing mental health problems within these communities is an essential step to providing sustainable waste management services. The findings informed an intervention strategy to implement a future collection system for these communities, and similar low-income or informal contexts within South Africa.

Ferric and sulfate coupled ammonium oxidation enhanced nitrogen removal in two-stage partial nitrification - Anammox/denitrification process for food waste liquid digestate treatment.

Liquid digestate of food waste is an ammonium-, ferric- and sulfate-laden leachate produced during digestate dewatering, where the carbon source is insufficient for nitrogen removal. A two-stage partial nitrification-anammox/denitrification process was established for nitrogen removal of liquid digestate without pre-treatment (>300 d), through which nitrogen (95 %), biodegradable organics (100 %), sulfate (78 %) and iron (100 %) were efficiently removed. Additional ammonium conversion (20 %N) might be coupled with ferric and sulfate reduction, while produced nitrite could be further converted to di-nitrogen gas through anammox (75 %) and denitrification (25 %). Notably, since increasingly contribution of hydroxylamine producing nitrous oxide, and up-regulated expression of electron transfer and cytochrome c protein, the enhanced ammonium oxidation was probably conducted through extracellular polymeric substances-mediated electron transfer between sulfate/ferric-reducers and aerobic ammonium oxidizers. Thus, the established partial nitrification-anammox/denitrification process might be a cost-efficient nitrogen removal technology for liquid digestate, benefitting to domestic waste recycling and carbon neutralization.

Solid waste management practices and challenges in Besisahar municipality, Nepal.

This study is a comprehensive assessment of the waste management system in Besisahar municipality. Information and some data have been collected from the municipality of Besisahar, followed by interviews with municipal officials responsible for waste management, stakeholders, waste workers, and residents. A total of 230 households, 20 schools, 10 government and private offices, 10 financial institutions, 60 commercial hotels, restaurants, and shops, and 20 medical shops and healthcare institutions, were selected in this study by random sampling. An extensive field study was conducted within all municipal wards and at dump sites. The results indicated that 42.14% of solid waste was collected through door-to-door collection services, 5.87% was mismanaged in open public places, 11.21% was used as compost manure, and the rest was discarded on riverbanks, dug up, and burned. A large component of the characterization of household waste consisted of organic waste (68.03%), followed by paper/paper products (8.13%), agricultural waste (5.5%), plastic (5.21%), construction (3.81%), textile (2.72%), metals (0.54%), glass (1.01%), rubber (0.10%), electronic (0.05%), pharmaceutical (0.1%) and others (4.78%) in the Besishahar municipality. Solid waste generation was found to be at 197.604 g/capita/day, as revealed by cluster sampling in 230 households. Around 4.285 tons-solid waste/day were generated in urban areas, while 16.13 tons-solid waste/day was estimated for the whole municipality. An important correlation between the parameters of solid waste was found by statistical analysis. Currently, solid waste is dumped on riverbanks, open fields, and springs, creating environmental and health hazards. The findings of this study will be useful to Besisahar municipality and its stakeholders in forming policies that facilitate waste management practices in this region and promote sustainable waste management systems.

Impact and process evaluation of a primary-school Food Education and Sustainability Training (FEAST) program in 10-12-year-old children in Australia: pragmatic cluster non-randomized controlled trial.

BACKGROUND: Environmentally sustainable food initiatives accompanying nutrition education, such as the Food Education and Sustainability Training (FEAST) program, have gained traction in school settings. The aim of this trial was to conduct an impact and process evaluation of FEAST, to evaluate its effect on children's fruit and vegetable (F&V) intakes, and secondary outcomes: F&V variety consumed, nutrition knowledge, food preparation/cooking skills, self-efficacy and behaviours, food waste knowledge and behaviours, and food production knowledge. METHODS: FEAST was a 10-week curriculum-aligned program, designed to educate children about healthy eating, food waste, and sustainability, while teaching cooking skills. It was implemented by classroom teachers, face-to-face and online, during COVID-19 school closures, in Australia in 2021. A custom designed survey was used to collect baseline and post-intervention data from students. Generalised linear mixed models (GLMM) estimated group differences in pre-post changes for primary and secondary outcomes. Surveys were also administered to students and teachers to evaluate intervention implementation. RESULTS: Twenty schools participated and self-selected to be either intervention schools (n = 10) or wait-list control (WLC) schools (n = 10). A total of 977, 5th and 6th grade children participated in the trial with a mean age of 11.1 years (SD ± 0.7). The FEAST intervention, compared to WLC, did not result in significant increases in primary outcomes nor secondary outcomes. The process evaluation revealed FEAST was well-received by students and teachers, but COVID-19 school closures hindered implementation fidelity with a less intense program delivered under the constraints of pandemic lockdowns. CONCLUSIONS: This is the first cluster non-randomized controlled trial designed to independently evaluate FEAST in the primary-school setting. No evidence was found for improved F&V intakes in children, nor secondary outcomes. However, the positive process evaluation results suggest that further trials of the program are warranted. If implemented as originally designed (pre-pandemic), with increased duration and complemented by supporting school policies, such programs have the potential to improve children's daily F&V intakes, cooking skills and food waste behaviours. This would support the Australian curriculum and contribute to: health promotion within schools and sustainable schools initiatives, the national agenda to reduce food waste and sustainable development goals. AUSTRALIAN AND NEW ZEALAND CLINICAL TRIALS REGISTRY: [ACTRN12620001347954]- Registered prospectively on 14/12/2020.

Life cycle thinking for the assessment of waste and circular economy policy: status and perspectives from the EU example.

Life cycle thinking methods such as life cycle assessment (LCA) and costing (LCC) were originally developed to assess the performance of products and services (business-making decisions). However, they are increasingly deployed to support policy-making along the entire policy cycle, including via impact assessment (IA) of different policy options. These applications are associated with a number of challenges, mainly related to the dynamic and prospective nature of policy IA, typically forward-looking into 10-20 years ahead. This requires the application of prospective scenario analyses to develop the baseline scenario, reflecting the 'do nothing' into the future (business-as-usual), and the alternative scenarios, reflecting the consequences incurred by the implementation of the policy options under study. Such prospective and broadened boundary nature of policy IA challenges traditional LCA/LCC practices mostly based on retrospective, static scenarios and datasets. The present study provides an overview of recent IA studies supporting waste policy to show the state-of-the-art and the main challenges associated with the application of life cycle methods in IA, focusing on the most recent EU waste and circular economy policies. Moreover, since specific and transparent guidance on how to implement consistently these methods in policy IA is lacking, the study provides an initial guidance for application of life cycle thinking in IA drawing upon the knowledge obtained conducting waste policy IA studies. Key challenges in the field are still to be addressed, and might inspire further research to improve the application of life cycle thinking to policy assessment.

Variability of the treated biomedical waste disposal behaviours during the COVID lockdowns.

Literature review suggests that studies on biomedical waste generation and disposal behaviors in North America are limited. Given the infectious nature of the materials, effective biomedical waste management is vital to the public health and safety of the residents. This study explicitly examines seasonal variations of treated biomedical waste (TBMW) disposal rates in the City of Regina, Canada, from 2013 to 2022. Immediately before the onset of COVID-19, the City exhibited a steady pattern of TBMW disposal rate at about 6.6 kg∙capita-1∙year-1. However, the COVID-19 pandemic and its associated lockdowns brought about an abrupt and persistent decline in TBMW disposal rates. Inconsistent fluctuations in both magnitude and variability of the monthly TBMW load weights were also observed. The TBMW load weight became particularly variable in 2020, with an interquartile range 4 times higher than 2019. The average TBMW load weight was also the lowest (5.1 tonnes∙month-1∙truckload-1) in 2020, possibly due to an overall decline in non-COVID-19 medical emergencies, cancellation of elective surgeries, and availability of telehealth options to residents. In general, the TBMW disposal rates peaked during the summer and fall seasons. The day-to-day TBMW disposal contribution patterns between the pre-pandemic and post-pandemic are similar, with 97.5% of total TBMW being disposed of on fixed days. Results from this Canadian case study indicate that there were observable temporal changes in TBMW disposal behaviors during and after the COVID-19 lockdowns.

Methane removal efficiencies of biochar-mediated landfill soil cover with reduced depth.

Biochar amendment for landfill soil cover has the potential to enhance methane removal efficiency while minimizing the soil depth. However, there is a lack of information on the response of biochar-mediated soil cover to the changes in configuration and operational parameters during the methane transport and transformation processes. This study constructed three biochar-amended landfill soil covers, with reduced soil depths from 75 cm (C2) to 55 cm (C3) and 45 cm (C4), and the control group (C1) with 75 cm and no biochar. Two operation phases were conducted under two soil moisture contents and three inlet methane fluxes in each phase. The methane removal efficiency increased for all columns along with the increase in methane flux. However, increasing moisture content from 10% to 20% negatively influenced the methane removal efficiency due to mass transfer limitation when at a low inlet methane flux, especially for C1; while this adverse effect could be alleviated by a high flux. Except for the condition with low moisture content and flux combination, C3 showed comparable methane removal efficiency to C2, both dominating over C1. As for C4 with only 45 cm, a high moisture content combined with a high methane flux enabled its methane removal efficiency to be competitive with other soil depths. In addition to the geotechnical reasons for gas transport processes, the evolution in methanotroph community structure (mainly type I methanotrophs) induced by biochar amendment and variations in soil properties supplemented the biological reasons for the varying methane removal efficiencies.

The global distribution of epidemiological studies involving waste pickers: A systematic review.

Waste pickers, who work with the collection of recyclable materials in search of a source of income, are subject to various risks and diseases that are very well researched. The aim of this systematic review was therefore to identify and analyze the results of epidemiological research on waste pickers over the last 20 years as well as to investigate the geographical distribution and quality of these studies. The studies were selected from the literature by creating search keys with representative keywords in different databases. This systematic review exceptionally includes research qualified according to the Strengthening the Reporting of Observational Studies in Epidemiology guidelines. In total, 61 epidemiological studies with waste pickers were found in 15 different countries, with the largest number of studies carried out in the American continent compared to the African and Asian, respectively. Regarding the quality, 91.80 % were classified as excellent and 8.20 % as good. Although the results show a significant number of epidemiological studies with waste pickers, demonstrating scientific evidence, that there is still a lack of research focusing on waste pickers in different work scenarios, from different health perspectives and in different parts of the world, and it is not possible to highlight the trends in health research for this profession.

Co-pyrolysis of chicken feathers and macadamia nut shells, a promising strategy to create nitrogen-enriched electrode materials for supercapacitor applications.

Global food waste emits substantial quantities of nitrogen to the environment (6.3 Mtons annually), chicken feather (CF) waste is a major contributor to this. Pyrolysis, in particular co-pyrolysis of nitrogen-rich and lignocellulosic waste streams is a promising strategy to improve the extent of pyrolytic nitrogen retention by incorporating nitrogen in its solid biochar structure. As such, this biochar can serve as a precursor for nitrogen-enriched activated carbons for application in supercapacitors. Therefore, this study investigates the co-pyrolysis of CF with macadamia nut shells (MNS) to create nitrogen-rich activated carbons. Co-pyrolysis increased nitrogen retention during pyrolysis from 9 % to 18 % compared to CF mono-pyrolysis, while the porosity was maintained. After removing undesirable inorganic impurities by dilute acid washing, this led to a specific capacitance of 21F/g using a scan rate of 20 mV/s. Finally, cycling stability tests demonstrated good stability with 73 % capacitance retention after 10 000 cycles.

A study on the evolution of tripartite collaborative prevention and control under public health emergencies using COVID-19 as an example.

The problem of repeated epidemic fluctuations in the normalized prevention and control stage is revealed by data from January 20, 2020, to January 30, 2023. In order to improve the collaborative response of the public and government departments to public health emergencies and avoid repeated fluctuations of the epidemic, a tripartite evolutionary game model of the public, local government, and central government departments is constructed, focusing on the evolutionary paths and evolutionary stabilization strategies of the three subjects, and the influence of each element on the evolutionary results is simulated by numerical simulation in Matlab, and based on the inadequacy of the static reward and punishment mechanism, a dynamic Based on the shortcomings of static reward and punishment mechanism, dynamic reward and punishment mechanism is introduced to control the stability of the evolving system. The study shows that (1) with the increase of the initial willingness of the three parties, the rate of the public choosing the discretionary flow strategy slows down, and the collaborative prevention and control process can be accelerated. (2) The reward and punishment mechanism of central government departments has a positive incentive effect on the local government's strict prevention and control and the public's conscious isolation. Appropriately increasing rewards, formulating reasonable subsidy strategies, and increasing penalties for violations are conducive to the overall optimization of the system, and the punishment mechanism is most sensitive to the regulation of the public's discretionary mobility behavior. (3) Government departments' prevention and control costs can influence their enthusiasm for strict prevention and control and real-time supervision. Reducing the human resources cost, time cost, and financial cost of prevention and control is conducive to government departments performing their duties more responsibly. (4) The static punishment mechanism fails to make timely adjustments according to the strategy choice of each actor. It cannot control the stability of the evolving system. In contrast, the dynamic punishment mechanism considers the punishment parameters to link the casual isolation rate with the lenient prevention and control rate, which can effectively control the system's fluctuating instability and is the system's stability control strategy. Finally, combining theoretical and simulation analysis, management suggestions are made for controlling repeated fluctuations of the epidemic in practice, and the research limitations of this paper are explained.

Photodegradation of 2-chlorodibenzo-p-dioxin (2-CDD) on the surface of municipal solid waste incineration fly ash: Kinetics and product analysis.

Considering that waste incineration fly ash is the main carrier of dioxins and can migrate over long distances in the atmosphere, it is of great significance to study the photochemical transformation behavior of dioxins on the surface of fly ash. In this work, 2-chlorodibenzo-p-dioxin (2-CDD) was selected to conduct a systematic photochemical study. The influence of various factors on the photodegradation of 2-CDD were first explored, and the results showed that small particle size of fly ash, low concentration of 2-CDD and appropriate level of humidity were more conducive to photodegradation, with the highest degradation percentage reaching 76%-84%. The components of fly ash (Zn (Ⅱ), Al (Ⅲ), Cu (Ⅱ) and SiO2) also had a certain promoting effect on the degradation of 2-CDD, which increases the degradation efficiency by 10%-20%, because they could act as effective photocatalysts to produce free radicals for reaction. With a higher total light exposure intensity, natural light environments led to a more complete degradation of 2-CDD than laboratory Xe lamp irradiation (90% degradation Vs. 79% degradation). Based on chemical probe and radical quenching experiment, hydroxyl radical also contributed to 2-CDD photodegradation on fly ash. A total of 16 intermediate products were detected by mass spectrometry analysis, and four initial reaction pathways of 2-CDD were speculated in the process, including dechlorination, ether bond cleavage, hydroxyl substitution, and hydroxyl addition. According to the results of density functional theory calculation, the reaction channels of ether bond cleavage and •OH attack were determined. The toxicity assessment software tool (TEST) was used to assess the toxicity and bioconcentration coefficient of reaction products, and it was found that the overall toxicity of the photodegradation products was reduced. This study would provide new insights into the environmental fate of dioxins during long-range atmospheric migration process.

PFAS removal from landfill leachate by ozone foam fractionation: System optimization and adsorption quantification.

Landfills are the primary endpoint for the disposal of PFAS-laden waste, which subsequently releases PFAS to the surrounding environments through landfill leachate. Ozone foam fractionation emerges as a promising technology for PFAS removal to address the issue. This study aims to (i) assess the effectiveness of the ozone foam fractionation system to remove PFAS from landfill leachate, and (ii) quantify equilibrium PFAS adsorption onto the gas-water interface of ozone bubbles, followed by a comparison with air foam fractionation. The results show that ozone foam fractionation is effective for PFAS removal from landfill leachate, with more than 90 % long-chain PFAS removed. The identified operating conditions provide valuable insights for industrial applications, guiding the optimization of ozone flow rates (1 L/min), dosing (43 mg/L) and minimizing foamate production (4 % wettability). The equilibrium modelling reveals that the surface excess of air bubbles exceeds that of ozone bubbles by 20-40 % at a corresponding PFAS concentration. However, the overall removal of PFAS from landfill leachate by ozone foam fractionation remains substantial. Notably, ozone foam fractionation generates foamate volumes 2 - 4 times less, resulting in significant cost savings for the final disposal of waste products and reduced site storage requirements.

Highly impact toughened and excellent flame-retardant polylactide/poly(butylene adipate-co-terephthalate) blend foams with phosphorus-containing and food waste-derived flame retardants.

Green polymeric foams are an important research topic for sustainable development. In this study, a natural multifunctional flame-retardant additive based on food waste was developed and evaluated for its ability to replace the commercial additives tricresyl phosphate (TCP) and trioctyl phosphate (TOP) in a polylactide/poly(butylene adipate-co-terephthalate) (PLA/PBAT) foam. A series of blend foams with additives were prepared by melt extrusion. According to the results, the blend foam with 20 phr of TCP showed the best combination of impact toughness and flame retardancy. TCP, however, poses health and environmental risks. Therefore, natural flame retardants (NFRs) were used to partially replace the commercial flame retardant (CFR). A combination of TCP and soybean residue (SB) produced an impact toughened and flame-retardant blend foam. When compared to the neat PLA/PBAT foam, the impact toughness of the best sample was increased by about 256 %. The optimal foam showed excellent flame resistance with a V-0 UL-94 rating and a high LOI value (31.8 %). SB has the potential to partially replace TCP as flame retardant and could be used in a broad range of PLA/PBAT foam applications.

Understanding nitrogen dynamics in the Brazilian beef industry: A comprehensive decadal analysis.

Brazil stands as a prominent beef producer and exporter, witnessing major transformations and expansions in its production chain over the past 20 years. These changes have prompted concerns regarding waste generation and environmental pressure. This study employs material flow analysis (MFA) to quantify nitrogen flows throughout the cattle slaughter process and subsequent beef consumption in Brazil, spanning from 2011 to 2021. The analysis encompasses co-production streams like leather, tallow, viscera, and blood. Nitrogen use efficiency (NUE) and the nitrogen cascade indicator (NCI) were used to evaluate efficiency and nitrogen accumulation in the production chain. Nitrogen inputs in the system increased by 8.47 %, while beef production rose by 7.29 %. In contrast, per capita beef consumption decreased by 1.29 kg, despite an overall consumption increase of 2.84 %, attributed to population growth in Brazil. Beef exports witnessed a notable surge of 86.03 %. Conversely, human excreta and food waste losses experienced increments of 10.88 % and 2.84 %, respectively. Examining NUE reveals the highest values during the slaughter phase (90 %), followed by processing, transportation, and storage stages (79-88 %). The consumption phase exhibited the lowest NUE values (29-34 %). Regarding the cumulative nitrogen effect, the NCI varied between 77 % and 82 % throughout the study period. This highlights opportunities for enhancing nitrogen use efficiency, particularly by addressing food waste at the consumer level. Notably, the study observes nitrogen accumulation across the Brazilian beef production chain, potentially contributing to the nitrogen cascade effect and heightening environmental pressure. Recognizing these dynamics provides avenues for targeted improvements, emphasizing the need to address nitrogen-related challenges and enhance sustainability in the beef production and consumption landscape.

Medium chain Fatty acids production from Food Waste via homolactic fermentation and lactate/ethanol elongation: Electron balance and thermodynamic assessment.

This study explored the potential of Food Waste (FW) extract as a suitable substrate for Medium Chain Fatty Acids (MCFAs) production, in a single-phase reactor, where both fermentation and Chain Elongation (CE) processes occurred simultaneously. A continuous experiment was conducted with an Organic Loading Rate (OLR) = 20 gCOD L-1 d-1 and was fed in batch mode twice a week with pH = 6. In addition, four batch tests were performed, to assess the effects on the MCFAs production of caproate inhibition, hydrogen partial pressure (PH2) and different lactate/acetate ratios. Thermodynamics and electron flux were calculated to gain insights into the process pathways. Due to the presence of aminoacids, fermentation was mostly homolactic and both lactate and ethanol were produced as Electron Donors (EDs); the average MCFAs production efficiency was âˆ¼ 12 %, although after 4 weeks the elongation process was halted, resulting in EDs accumulation. This occurred regardless of inoculum selection and the presence of caproate as a possible inhibitor, suggesting that EDs accumulation was due to the elongation process kinetics being slower than those of the fermentation step, thus calling for a longer Hydraulic Retention Time (HRT). It's worth noting that lactate was prevalently self-elongated to butyrate, whereas ethanol elongation only took place after lactate depletion, but was more efficient since it required other Electron Acceptors (EAs) such as butyrate, propionate or valerate. Moreover, the selected pH limited the acrylate pathway to a reasonable extent, whereas the high PH2 prevented both ethanol and lactate oxydation to acetate.