Advanced testing method to evaluate the performance of respirator filter media.
J Occup Environ Hyg
; 13(10): 750-8, 2016 10 02.
Article
in En
| MEDLINE
| ID: mdl-27104915
Filter media for respirator applications are typically exposed to the cyclic flow condition, which is different from the constant flow condition adopted in filter testing standards. To understand the real performance of respirator filter media in the field it is required to investigate the penetration of particles through respirator filters under cyclic flow conditions representing breathing flow patterns of human beings. This article reports a new testing method for studying the individual effect of breathing frequency (BF) and peak inhalation flow rate (PIFR) on the particle penetration through respirator filter media. The new method includes the use of DMA (Differential Mobility Analyzer)-classified particles having the most penetrating particle size, MPPS (at the constant flowrate of equivalent mean inhalation flow rate, MIFR) as test aerosol. Two condensation particle counters (CPCs) are applied to measure the particle concentrations at the upstream and downstream of test filter media at the same time. Given the 10 Hz sampling time of CPCs, close-to-instantaneous particle penetration could be measured. A pilot study was performed to demonstrate the new testing method. It is found that the effect of BF on the particle penetration of test respirator filter media is of importance at all the tested peak inhalation flow rates (PIFRs), which is different from those reported in the previous work.
Key words
Full text:
1
Collection:
01-internacional
Database:
MEDLINE
Main subject:
Respiratory Protective Devices
/
Materials Testing
/
Respiratory Rate
/
Air Filters
Language:
En
Journal:
J Occup Environ Hyg
Journal subject:
MEDICINA OCUPACIONAL
/
SAUDE AMBIENTAL
Year:
2016
Document type:
Article
Country of publication: