Exploiting CO2 laser to boost graphite inks electron transfer for fructose biosensing in biological fluids.

ABSTRACT

The possibility to print electronics by means of office tools has remarkedly increased the possibility to design affordable and robust point-of-care/need devices. However, conductive inks suffer from low electrochemical and rheological performances limiting their applicability in biosensors. Herein, a fast CO2 laser approach to activate printed carbon inks towards direct enzymatic bioelectrocatalysis (3rd generation) is proposed and exploited to build biosensors for D-fructose analysis in biological fluids. The CO2 laser treatment was compared with two lab-grade printed transducers fabricated with solvent (SB) and water (WB) based carbon inks. The use of the laser revealed significant morpho-chemical variations on the printed inks and was investigated towards enzymatic direct catalysis, using Fructose dehydrogenase (FDH) integrated into entirely lab-produced biosensors. The laser-driven activation of the inks unveils the inks' direct electron transfer (DET) ability between FDH and the electrode surface. Sub-micromolar limits of detection (SB-ink LOD = 0.47 µM; WB-ink LOD = 0.24 µM) and good linear ranges (SB-ink 5-100 µM; WB-ink 1-50 µM) were obtained, together with high selectivity due to use of the enzyme and the low applied overpotential (0.15 V vs. pseudo-Ag/AgCl). The laser-activated biosensors were successfully used for D-fructose determination in complex synthetic and real biological fluids (recoveries 93-112%; RSD ≤8.0%, n = 3); in addition, the biosensor ability for continuous measurement (1.5h) was also demonstrated simulating physiological D-fructose fluctuations in cerebrospinal fluid.