Terpolymer resin containing bioinspired borneol and controlled release of camphor: Synthesis and antifouling coating application.

Marine biofouling can cause a biocorrosion, resulting in degradation and failure of materials and structures. In order to prevent sea creatures from attaching to the surface, in this work, a new environmentally friendly antifouling coating by incorporating antibacterial polymers and natural antifouling agents has been designed and synthesized. Surface chemical composition and changes in surface hydrophobicity were studied by FTIR spectroscopy and contact angle measurements, respectively. Measurements of mass loss of antifouling resin were also carried out and the release rate of camphor from antifouling coating was tested by using UPLC. It had been found that the changes in the content of triisopropylsilylacrylate (TIPSA) (from 4% to 12%) and isobornyl methacrylate (IBOMA) (from 50% to 16.7%) did not significantly affect the release of camphor. The content of IBOMA decreased from 50% to 16.7%, the antifouling performance of the resin system appeared slightly reduced. In addition, rosin could help regulate the release rate of the resin system to desorb camphor slowly in water in a controlled manner. Furthermore, the antifouling capability of as-prepared samples was evaluated via algae suppression experiments and marine field tests. This study highlighted the environmentally friendly antifouling coating as a potential candidate and efficient strategy to prohibit biofouling in seawater.