Bond strength of prosthodontic luting materials to titanium after localized cyclic loading.
Am J Dent
; 13(5): 251-4, 2000 Oct.
Article
in En
| MEDLINE
| ID: mdl-11764111
ABSTRACT
PURPOSE:
To establish an in vitro analysis system to evaluate the effect of cyclic loading on the bond strengths and durability of luting materials bonded to titanium. MATERIALS ANDMETHODS:
Machine-milled titanium disks were finished with 600 grit silicon-carbide paper and pairs of disks were bonded together using the five different luting materials. A stainless steel stylus was vertically loaded at a center position (Model 1) or at the border (Model 2) of the specimens with a force of 75.6 N at 7500 cycles/hr. When the stylus contacted the specimen surface through the water slurry of poly(methyl methacrylate) beads, it rotated clockwise up to 15 degrees and counter-rotated. Shear bond strengths were determined 1 hr after bonding, after storage in water at room temperature for 24 hr, and after the loading for 100,000 cycles.RESULTS:
The bond strengths of the unfilled adhesive resin and resin-based composite cement (RBC) were significantly higher than those of the glass-ionomer cements. Zinc phosphate cement demonstrated no bonding ability to titanium. After 100,000 cycles, peripheral loading in Model 2 significantly reduced the bond strength of the RBC and glass-ionomer cements, while Model 1 loading did not. The highest and the most durable bonds were obtained with the unfilled adhesive resin in both models.
Search on Google
Collection:
01-internacional
Database:
MEDLINE
Main subject:
Titanium
/
Dental Bonding
/
Dental Cements
Type of study:
Prognostic_studies
Limits:
Humans
Language:
En
Journal:
Am J Dent
Journal subject:
ODONTOLOGIA
Year:
2000
Document type:
Article
Affiliation country:
United States