Magnetron co-sputtered silicon-containing hydroxyapatite thin films--an in vitro study.

ABSTRACT

The use of silicon-substituted hydroxyapatite (Si-HA) as a biomaterial has been reported recently. In vivo testing has shown that Si-HA promotes early bonding of the bone/implant interface. In order to extend its usage to major load-bearing applications such as artificial hip replacement implants, it has been proposed that the material could be used in the form of a coating on implant surfaces. This paper reports a preliminary study of the biocompatibility of magnetron co-sputtered silicon-containing hydroxyapatite (Si-HA) coatings on a metallic substrate. Magnetron co-sputtered Si-HA films of thickness 600 nm with a Si content of approximately 0.8 wt% were produced on titanium substrates. X-ray diffraction analysis showed that the as-deposited Si-HA films were either amorphous or made up of very small crystals. The crystallinity of Si-HA films was increased after post-deposition heat treatment at 700 degrees C for 3 h, and the principal peaks were attributable to HA. The formation of nano-scale silicon-calcium phosphate precipitates was noted on the heat-treated films. In vitro cell culture has demonstrated that human osteoblast-like cells attached and grew well on all films, with the highest cell growth and signs of mineralisation observed on the heat-treated Si-HA films. In addition, many focal contacts were produced on the films and the cells had well-defined actin cytoskeletal organisation. This work shows that as-deposited and heat-treated Si-HA films have excellent bioactivity and are good candidates when rapid bone apposition is required. Furthermore, heat-treated Si-HA films have improved biostability compared to as-deposited films under physiological conditions.