Design and process parametric investigations on acrylic-based single slope solar still to enhance daily energy efficiency and productivity of water: an application to desalination and dye removal.

ABSTRACT

Solar-driven water desalination is growing quickly, typically using other renewable energy sources. However, its efficiency is heavily reliant on design and process parameters. The aim of this study is to experimentally investigate the impact of various design and process parameters on the performance of single slope solar still. Thus, a homemade solar still has been fabricated using acrylic sheet with a basin area of 0.25 × 0.25 m2 to carry out the experiments in Vellore, India (latitude 12.9692° N and longitude 79.1559° E). Additionally, this solar still setup is investigated using different absorbing plates (copper plate and copper plate with black coating), various glass cover angles (15°, 30° and 45°) and changing the wind speed (3 m/s, 3.5 m/s and 4 m/s) with help of electric fan. Daily energy efficiency and productivity of water are compared for the same basin area with different design and process parameters. From the results, daily energy efficiency and water productivity are improved with the increase of glass cover angle and wind speed. It is found that the best combination is copper plate with black coating, glass cover angle of 45° and wind speed of 4 m/s. This exhibits 34.09% in daily energy efficiency and 2640 ml/m2 in productivity of water. After the desalination process, the primary ions (Na+, K+, Mg2+, and Ca2+) of seawater are significantly reduced and satisfy the requirement of WHO standards. Subsequentially, dye removal is effectively achieved in the proposed solar still.