Design of low loss 1 × 1 and 1 × 2 phase-change optical switches with different crystalline phases of Ge2Sb2Te5 films.

ABSTRACT

On-chip photonics devices relying on the weak, volatile thermo-optic or electro-optic effects of silicon usually suffer from high insertion loss (IL) and a low refractive index coefficient. In this paper, we designed two novel 1 × 1 and 1 × 2 phase-change optical switches based on a signal-mode Si waveguide integrated with a Ge2Sb2Te5 (GST) top clad layer, respectively. The three-state switch including amorphous GST (a-GST), face centered cubic crystalline phase (FCC-GST) and hexagonal crystalline phase (HCP-GST) operated by utilizing the dramatic difference in the optical constants between the amorphous and two crystalline phases of GST. In the case of the 1 × 1 optical switch, an extinction ratio (ER) of 8.9 dB and an extremely low IL of 0.8 dB were achieved using an optimum GST length of only 2 µm. While for the 1 × 2 optical switch, low ILs in the range of 0.15 ∼ 0.35 dB for both 'cross' (a-GST) and 'bar' (FCC-GST and HCP-GST) states were also obtained. Additionally, we found that both ILs and mode losses of the switch with HCP-GST were about half lower than those with FCC-GST, which means FCC-GST could be instituted by HCP-GST in the traditional ovonic switch with the consideration of low loss. This research provides the fundamental understanding for the realization of low loss and non-volatile Si-GST hybrid optical switches, with potential for future communication networks.