Steerable Surgical Instrument for Conventional and Single-Site Minimally Invasive Surgery.

ABSTRACT

Background. This article aims to present an innovative design of a steerable surgical instrument for conventional and single-site minimally invasive surgery (MIS), which improves the dexterity and maneuverability of the surgeon while offering a solution to the limitations of current tools. Methods. The steerable MIS instrument consists of a deflection structure with a curved sliding joints design that articulates the distal tip in two additional degrees of freedom (DoFs), relative to the instrument shaft, using transmission by cables. A passive ball-joint mechanism articulates the handle relative to the instrument shaft, improves wrist posture, and prevents collision of instrument handles during single-site MIS procedures. The two additional DoFs of the articulating tip are activated by a thumb-controlled device, using a joystick design mounted on the handle. This steerable MIS instrument was developed by additive manufacturing in a 3D printer using PLA polymer. Results. Prototype testing showed a maximum tip deflection of 60° in the left and right directions, with a total deflection of 120°. With the passive ball-joint fully offset, the steerable tip achieved a deflection of 90° for the right and 40° for the left direction, with a total deflection of 130°. Furthermore, the passive ball-joint mechanism in the handle obtained a maximum range of motion of 60°. Conclusions. This steerable MIS instrument concept offers an alternative to enhance the application fields of conventional and single-site MIS, increasing manual dexterity of the surgeon and the ability to reach narrow anatomies from other directions.