Enhanced Electrical and Optical Properties of Bismuth Tantalum Oxide Thin Films through Graphene Oxide Doping.

ABSTRACT

In this study, a hybrid thin film was fabricated by doping graphene oxide in a bismuth tantalum oxide solution in the sol-gel state. The thin film was produced by a brush-coating process. The graphene oxide doping ratios used were 0, 5, and 15 wt %. In the process of producing the thin film, the prepared sol-gel solution generates contraction forces, owing to the shear stress from the bristles of the brush, forming a microgroove structure. This structure was confirmed through atomic force microscopy, transmission electron microscopy, and energy-dispersive spectroscopy analyses. As a result of line profile analysis in atomic force microscopy, the groove heights of the thin film surface at 0, 5, and 15 wt % doping were 110, 130, and 160 nm, respectively, and the width of all grooves was 1 µm. The width of all thin films was approximately 1 µm, and microgrooves were confirmed. Moreover, the hybrid thin-film formation was confirmed by X-ray photoelectron spectroscopy. By comparing the electrical properties of the bismuth tantalum oxide thin film without graphene oxide doping and the thin film doped with 15 wt % graphene oxide, it was demonstrated that the electro-optical properties increased excellently with graphene oxide doping. Typically, the threshold voltage was reduced by approximately 0.26 V. Based on these observations, graphene oxide doped bismuth tantalum oxide hybrid thin films can be considered as promising candidates for thin-film applications in next-generation displays.