Corrosion of Two Iron-Based Aluminaforming Alloys in NaCl-MgCl2 Molten Salts at 600 °C.
Materials (Basel)
; 17(13)2024 Jul 01.
Article
in En
| MEDLINE
| ID: mdl-38998308
ABSTRACT
Molten salts have been used as heat transfer fluids since the middle of the 20th century. More recently, molten chloride salts have been studied for use in concentrated solar power plants or molten salt reactors. However, none of the materials studied to date has been able to withstand this highly corrosive environment without controlling the salt's redox potential. The alumina-forming alloy was a promising option, as it has not yet been widely studied. To investigate this possibility, two iron-based alumina-forming alloys were corroded in NaCl-MgCl2 eutectic at 600 °C for 500 h after being pre-oxidised to grow a protective layer of α-alumina on each alloy. A salt purification protocol based on salt electrolysis was implemented to ensure comparable and reproducible results. During immersion, alumina was transformed into MgAl2O4, as shown by FIB-SEM observation. Inter and intragranular corrosion were observed, with the formation of MgAl2O4 in the corroded zones. The nature of the oxides was explained by the predominance diagram. Intragranular corrosion was 2 µm deep, and intergranular corrosion 10 µm deep. Alumina formed at the bottom of the intergranular corrosion zones. The depth of intergranular corrosion is consistent with O diffusion control at the grain boundary.
Full text:
1
Collection:
01-internacional
Database:
MEDLINE
Language:
En
Journal:
Materials (Basel)
Year:
2024
Document type:
Article
Affiliation country:
Country of publication: