Your browser doesn't support javascript.
Stabilizing Polyether Electrolyte with a 4 V Metal Oxide Cathode by Nanoscale Interfacial Coating.
ACS Appl Mater Interfaces ; 11(32): 28774-28780, 2019 Aug 14.
Artigo em Inglês | MEDLINE | ID: mdl-31314493
Safety is critical to developing next-generation batteries with high-energy density. Polyether-based electrolytes, such as poly(ethylene oxide) and poly(ethylene glycol) (PEG), are attractive alternatives to the current flammable liquid organic electrolyte, since they are much more thermally stable and compatible with high-capacity lithium anode. Unfortunately, they are not stable with 4 V Li(NixMnyCo1-x-y)O2 (NMC) cathodes, hindering them from application in batteries with high-energy density. Here, we report that the compatibility between PEG electrolyte and NMC cathodes can be significantly improved by forming a 2 nm Al2O3 coating on the NMC surface. This nanoscale coating dramatically changes the composition of the cathode electrolyte interphase and thus stabilizes the PEG electrolyte with the NMC cathode. With Al2O3, the capacity remains at 84.7% after 80 cycles and 70.3% after 180 cycles. In contrast, the capacity fades to less than 50% after only 20 cycles in bare NMC electrodes. This study opens a new opportunity to develop safe electrolyte for lithium batteries with high-energy density.





Texto completo: Disponível Coleções: Bases de dados internacionais Base de dados: MEDLINE Idioma: Inglês Revista: ACS Appl Mater Interfaces Assunto da revista: Biotecnologia / Engenharia Biomédica Ano de publicação: 2019 Tipo de documento: Artigo