RESUMO
OBJECTIVE: Implantology is one of the most investigated topics in modern dentistry. The current review was planned to systematically summarise all industrial, mass production and experimental trends in dental implant manufacturing relative primarily to their surface modification conducted between January 2017 and January 2020. MATERIALS AND METHODS: The review was conducted in Army Medical College, National University of Medical Sciences, Rawalpindi, Armed Forces Institute Of Dentistry, Combined Military Hospital, Rawalpindi, Foundation University College of Dentistry, Fauji Foundation Hospital, Islamabad, and the Higher Education Commission Library, Islamabad. Literature was searched on PubMed, Scopus, Medline, Cochrane and Science Direct databases. The key words employed were "dental Implants", "surface modification", "surface morphology", "surface treatment" and "surface augmentation". RESULTS: A total of 38 articles were short-listed and reviewed in detail. There was abundant evidence suggesting the importance of these surface modifications on improving the implant success. Several strategies have been suggested to modify the implant surface topography as well as surface chemistry in order to achieve a micro-porous structure with nano-scale architecture, with increased bio-activity; hydrophilicity and anti-bacterial properties. CONCLUSIONS: There has been commendable success with many of these strategies in laboratories. However, following the success in ex-vivo studies, very few of these surface modalities have found their way to clinical set-ups.
Assuntos
Implantes Dentários , HumanosRESUMO
OBJECTIVE: To identify the frequency and types of prescription errors, assess adherence to WHO prescribing indicators, and highlight the gaps in current prescribing practices of Junior dental practitioners in a tertiary care hospital in Karachi, Pakistan. METHODS: This cross-sectional study was conducted from January 2021 to March 2021. The study included the prescriptions by house surgeons and junior postgraduate medical trainees for walk-in patients visiting the dental outpatient department. A total of 466 prescriptions were evaluated for WHO core drug prescribing indicators. The prescription error parameters were prepared by studying the WHO practical manual on guide to good prescribing and previous studies. Prescription errors, including errors of omission related to the physician and the patients, along with errors of omission related to the drug, were also noted. The statistical analysis was performed with SPSS version 25. Descriptive analysis was performed for qualitative variables in the study. RESULTS: The average number of drugs per encounter was found to be 3.378 drugs per prescription. The percentage of encounters with antibiotics was 96.99%. Strikingly, only 16.95% of the drugs were prescribed by generic names and 23.55% of drugs belonged to the essential drug list. The majority lacked valuable information related to the prescriber, patient, and drugs. Such as contact details 419 (89.9%), date 261 (56%), medical license number 466 (100%), diagnosis 409 (87.8%), age and address of patient 453 (97.2%), form and route of drug 14 (3%), missing drug strength 69 (14.8%), missing frequency 126 (27%) and duration of treatment 72 (15.4%). Moreover, the wrong drug dosage was prescribed by 89 (19%) prescribers followed by the wrong drug in 52 (11.1%), wrong strength in 43 (9.2%) and wrong form in 9 (1.9%). Out of 1575 medicines prescribed in 466 prescriptions, 426 (27.04%) drug interactions were found and 299 (64%) had illegible handwriting. CONCLUSION: The study revealed that the prescription writing practices among junior dental practitioners are below optimum standards. The average number of drugs per encounter was high, with a significant percentage of encounters involving antibiotics. However, a low percentage of drugs were prescribed by generic name and from the essential drug list. Numerous prescription errors, both omissions and commissions, were identified, highlighting the need for improved training and adherence to WHO guidelines on good prescribing practices. Implementing targeted educational programs and stricter regulatory measures could enhance the quality of prescriptions and overall patient safety.
Assuntos
Prescrições de Medicamentos , Erros de Medicação , Centros de Atenção Terciária , Humanos , Paquistão , Estudos Transversais , Prescrições de Medicamentos/estatística & dados numéricos , Prescrições de Medicamentos/normas , Erros de Medicação/prevenção & controle , Erros de Medicação/estatística & dados numéricos , Padrões de Prática Odontológica/estatística & dados numéricos , Masculino , Feminino , Adulto , Odontólogos/estatística & dados numéricos , Medicamentos Genéricos/uso terapêuticoRESUMO
Background: Salivary disturbance is associated with patients who either have an active coronavirus disease 2019 (COVID-19) or have recovered from coronavirus infection along with loss of taste sensation. In addition, COVID-19 infection can drastically compromise quality of life of individuals. Objective: This study aimed to analyze xerostomia, ageusia and the oral health impact in coronavirus disease-19 patients utilizing the Xerostomia Inventory scale-(XI) and the Oral Health Impact Profile-14. Methods: In this cross-sectional survey-based study, data was collected from 301 patients who suffered and recovered from COVID-19. Using Google Forms, a questionnaire was developed and circulated amongst those who were infected and recovered from coronavirus infection. The Xerostomia Inventory (XI) and Oral Health Impact Profile-14 were used to assess the degree and quality of life. A paired T-test and Chi-square test were used to analyze the effect on xerostomia inventory scale-(XI) and OHIP-14 scale scores. A p-value of 0.05 was considered as statistically significant. Results: Among 301 participants, 54.8% were females. The prevalence of xerostomia in participants with active COVID-19 disease was 39.53% and after recovery 34.88%. The total OHIP-14 scores for patients in the active phase of infection was 12.09, while 12.68 in recovered patients. A significant difference was found between the mean scores of the xerostomia inventory scale-11 and OHIP-14 in active and recovered COVID patients. Conclusion: A higher prevalence of xerostomia was found in COVID-19 infected patients (39.53%) compared to recovered patients (34.88%). In addition, more than 70% reported aguesia. COVID-19 had a significantly higher compromising impact on oral function of active infected patients compared to recovered patients.
Assuntos
Ageusia , COVID-19 , Qualidade de Vida , Xerostomia , Feminino , Humanos , Masculino , Ageusia/epidemiologia , COVID-19/epidemiologia , Estudos Transversais , Prevalência , Xerostomia/epidemiologia , Adolescente , Adulto Jovem , Adulto , Pessoa de Meia-IdadeRESUMO
Objective: Alveolar osteitis is a painful complication that often arises after tooth extraction, presenting a significant clinical challenge. It is imperative to gain a comprehensive understanding of both its occurrence and the contributing factors to enhance the quality of dental care. The aim of this study was to assess the frequency and prevalence of alveolar osteitis among patients and compare these variables based on demographic characteristics (age and sex), the number of teeth extractions, operator experience, health status, and smoking habits in the target population. Methods: This cross-sectional observational study was conducted from May 2019 to April 2020. It included all patients above 16 years of age, of both genders, who underwent permanent tooth extraction for various reasons. Patient demographics, smoking habits, health status, operating dental surgeon's clinical experience, extraction technique, and the number of teeth extracted were recorded. Statistical analysis was performed using SPSS version 25. Chi-square test and regression analysis were used to assess differences between age, sex, smoking habit, dentist category, and the number of teeth extractions in relation to alveolar osteitis. Results: A total of 679 permanent tooth extractions were performed in 438 patients. Alveolar osteitis was observed in 107 cases (15.7%) following tooth extractions. Among these, 36 cases (33.6%) occurred in single tooth extraction cases, while 71 cases (66.4%) were present in patients with multiple extractions. Moreover, 67 cases (62.6%) of alveolar osteitis were found in cigarette smokers. In addition, 61 cases (57%) of dry sockets were reported after tooth extractions performed by dental interns, while 46 cases (43.0%) were noted in extractions performed by experienced dental surgeons and specialists. Conclusion: The study found a 15.7% incidence of alveolar osteitis in tooth extraction patients in the Al-Jouf region. Alveolar osteitis was more prevalent in males and the age group of 56-77 years. Multiple tooth extractions were associated with higher alveolar osteitis incidence, while operator inexperience increased post-extraction complication risks. In addition, a promising novel protocol and risk assessment scoring system have been devised which require further validation and future research.
RESUMO
The objective of this study was to analyze the outcomes of the free vascularized fibular flap in the reconstruction of mandibular defects, and to assess the oral health impact profile of these patients before surgery and after oral rehabilitation. Patients requiring reconstruction of defects greater than 6 cm were selected for this study. The defect size and type, the size of the required skin paddle, the need for second flaps, the intraoperative complications, and the type of closure were documented. Patients were evaluated postoperatively for function, aesthetics, and donor- or reconstruction-site complications. The validated oral health impact profile (OHIP-14) questionnaires were filled before and after surgery and after dental rehabilitation. This study included 11 cases of squamous-cell carcinomas, 2 cases of malignant nerve sheath tumors, and 1 case each of malignant melanoma, ameloblastoma, giant-cell tumor, osteosarcoma, and chondrosarcoma. The analysis revealed a significant association (p = 0.030) of gender with free vascular flap complications, while no significant association (p > 0.05) was found when donor- and recipient- site complications, as well as the type of resection (Brown's classification), were compared with free vascular flaps. Moreover, the total OHIP-14 scores for patients before surgery, after surgery, and after dental rehabilitation were 12.03 ± 1.34, 10.66 ± 1.41, and 08.33 ± 0.62, respectively. The oral health-related quality of life was markedly improved after the reconstruction of the mandibular defects with free vascularized fibular flap and dental rehabilitation. The overall success rate of fibular flap in our study was 72.2%, which is lower than that reported in the literature. This may be attributed to the fact that almost all of our cases included large segmental defects that extended across the midline of the mandible.
RESUMO
This observational study was conducted to evaluate the clinical signs and symptoms of maxillary sinus tumors and to propose a clinical examination sieve and a unique risk alarm score to be used for timely patient referral and vigilance. The study consisted of 70 patients between 20 to 82 years of age from both sexes. The clinical information gained was collected from the upper dentoalveolar segment, orbit, and nasal sites. Regarding the early clinical sign and symptoms of patients, nasal obstruction was found in 67 patients (95.7%), facial swelling in 69 patients (98.6%), paresthesia in 41 patients (58.6%), and epistaxis in 50 patients (71.4%). Furthermore, in terms of the late signs and symptoms, a palpable mass in buccal sulcus was observed in 65 (92.9%) of the patients, lymphadenopathy in 24 (34.3%), paresthesia in 38 (54.3%), and diplopia in 22 (31.4%). Furthermore, general sign and symptoms like exophthalmos was present in 35 patients (50%), anosmia was observed in 37 patients (52.9%), and oroantral fistula was noted in 37 patients (55.9%). Additionally, 67 (95.7%) of the patients complained of nasal obstruction. Similarly, facial asymmetry was observed in 69 (98.6%) of the patients and double vision was observed in 24 (34.4%). Tumors of the maxillary sinus have a very insidious course of spread and uncertain clinical signs and symptoms. What makes diagnosis worse is the fact that the symptoms of these tumors are so well hidden in the sponge-like nature of the midfacial region that they are easily misinterpreted by patients. Therefore, diagnoses must be made early, dentists must be vigilant, and patients must be fully investigated at the slightest suspicion of a tumor, albeit benign.
RESUMO
Microstomia is an abnormally reduced oral aperture. In the literature, it is not classified by any particular size criteria, rather defined by its effects on function and esthetics. Prosthodontic management of edentulous patients with microstomia is a challenging task. Use of conventional methods for recording an impression and fabricating prosthesis is not effective in such patients. To fabricate well-fitting prosthesis, accuracy of impression recording important anatomic landmarks is essential. Formation of an exacting custom tray and diagnostic cast is critical for final impression accuracy. Provision of a well-fitting prosthesis in microstomia patient will restore esthetics, comfort, and function with oral and systemic patient wellbeing. This paper presents a case report of managing an edentulous microstomia patient with sectional removable prosthesis. Furthermore, it proposes a novel classification system for microstomia patients according to severity of the condition.
RESUMO
OBJECTIVE: The objective of this study was to compare the effectiveness of premedication drugs including single dose Piroxicam and Prednisolone in regard to post endodontic pain at different time intervals (24, 48, 72 and 96 hours) after single visit root canal treatment. METHODS: This randomized clinical trial (registration no. NCT04124822) was performed in operative dentistry department of a private clinical institute. One hundred twenty patients identified with symptomatic irreversible pulpitis were included in the study. The pain intensity levels were marked through the use of visual analog scale (VAS) before the commencement of treatment. The participants were randomly allocated in three groups, Group I (n=40) received no medication (control), Group II (n=40) received Piroxicam (20 mg) and Group III (n=40) received Prednisolone (20 mg). The drugs were administered thirty minutes before the endodontic procedure was initiated. Root canal treatmentwas carried out followed by placement of provisional restoration in a single appointment. The patients were instructed to continue marking their pain intensity levels after 24, 48, 72 and 96 hours using VAS. All patients were called for follow up after 4 days for clinical evaluation and the placement of permanent restoration. The effectiveness of each drug over different time interval was studied employing ANOVA test. The significance level was set at P≤0.05. RESULTS: The results of the present study revealed that a higher percentage of patients in all 3 groups, reported no post-operative pain at all evaluated time durations (24, 48, 72, and 96 hours). However, the long term effectiveness (96 hours) of both drugs to reduce post-endodontic pain was observed to be statistically insignificant. There was no significant difference in demographic data in terms of age (P=0.14), gender (P=0.12), whilst tooth type (P≤0.05) showed statistically significant value. CONCLUSION: Pre-medication with either single dose piroxicam or prednisolone was able to prevent post-endodontic pain in patients with symptomatic irreversible pulpitis.
Assuntos
Piroxicam , Pulpite , Cavidade Pulpar , Humanos , Dor Pós-Operatória/tratamento farmacológico , Dor Pós-Operatória/prevenção & controle , Piroxicam/uso terapêutico , Prednisolona/uso terapêutico , Pré-Medicação , Pulpite/terapiaRESUMO
The objective of this study was to investigate general dentists' observations of various aesthetic dental procedures among social media users. A cross-sectional study was conducted at the Department of Prosthodontics, Altamash Institute of Dental Medicine, over a duration of six months. Data were collected using a well-structured questionnaire comprising 21 predefined responses. The questionnaire was uploaded and disseminated through Google Surveys by forwarding web page links through emails and WhatsApp. The data collected were analysed through Statistical Package for Social Sciences (SPSS-Version 25). The majority (90.7%) of the dental practitioners surveyed believed that there is an increase in the demand for aesthetic dental procedures and social media is a major contributor to it. Moreover, most of the 377 (81.8%) participants agreed that social media is a beneficial platform enabling them to educate, advertise, and communicate with patients. Concerning popular aesthetic procedures, teeth whitening (54.7%), Hollywood smile (17.1%), dental veneers (11.9%), and Invisalign (10.4%) were the most commonly demanded aesthetic procedures. The patients showed desire for these procedures because they were trending on social media platforms. Almost half of the general dental practitioners used social media to post their content related to aesthetic dentistry and to promote their work. They preferred using before and after pictures (48.6%) for advertising their content related to aesthetic dentistry. Within the limitations of the study, it is concluded that the demand for aesthetic dentistry is rapidly growing, and social media is the main driving force behind this revolution as the general population has direct access to the profiles of celebrities and influencers, who all appear to have 'the perfect smile'. This shift in people's self-image has created a surge in patients seeking cosmetic treatments.
RESUMO
The present study aimed to analyze mid horizontal facial third proportions, those being the interpupillary, inner intercanthal, and bizygomatic distance modified with golden proportion, The Preston proportion, golden percentage and 70% recurring esthetic dental proportion were used for determining maxillary anterior teeth width. A total of 230 participants took part in this study. The front dental and facial photographs along dental stone cast which were converted to three-dimensional (3D) models were used for evaluation. The mid horizontal facial third proportions showed no significant relationship with maxillary anterior teeth width without modification with dental proportions. Whereas, with modification, no statistically significant difference was found between inner-intercanthal distance by golden percentage and width of central incisors. The bizygomatic distance was greater than intercanine distance. While the interpupillary distance by golden proportion was found to be consistent with intercanine distance in female participants. The modified anterior teeth width was significantly different from measured values, when determined by using the three mid facial proportions with Preston and 70% recurring esthetic dental (RED) proportion. Furthermore, the measured width of maxillary anterior teeth showed no difference when plaster dental casts widths were compared with 3D models. The interpupillary, inner-intercanthal, and bizygomatic distance should not be directly used to determine maxillary anterior teeth width. While maxillary anterior teeth width can be determined by modifying the inner inter-canthal distance with golden percentage and interpupillary distance with golden proportion. Moreover, the midfacial third proportions modified with Preston and 70% recurrent esthetic dental proportion were found to be unreliable for the determination of maxillary anterior teeth widths.
RESUMO
This study aimed to analyze the existing literature on how artificial intelligence is being used to support the identification of cephalometric landmarks. The systematic analysis of literature was carried out by performing an extensive search in PubMed/MEDLINE, Google Scholar, Cochrane, Scopus, and Science Direct databases. Articles published in the last ten years were selected after applying the inclusion and exclusion criteria. A total of 17 full-text articles were systematically appraised. The Cochrane Handbook for Systematic Reviews of Interventions (CHSRI) and Newcastle-Ottawa quality assessment scale (NOS) were adopted for quality analysis of the included studies. The artificial intelligence systems were mainly based on deep learning-based convolutional neural networks (CNNs) in the included studies. The majority of the studies proposed that AI-based automatic cephalometric analyses provide clinically acceptable diagnostic performance. They have worked remarkably well, with accuracy and precision similar to the trained orthodontist. Moreover, they can simplify cephalometric analysis and provide a quick outcome in practice. Therefore, they are of great benefit to orthodontists, as with these systems they can perform tasks more efficiently.
RESUMO
BACKGROUND: Biomedical waste can potentially compromise the environment and public safety if not safely disposed. OBJECTIVE: The aim was to assess the understanding and safe practices of biomedical and dental waste amongst the dental practitioners and practical year students amid the COVID-19 pandemic. METHODS: A structured and validated questionnaire consisting of 21 closed ended questions was used to collect data from dental practitioners and students working in hospitals and clinics. The questionnaire was distributed in paper and digital form amongst the participants. Descriptive analysis was performed for categorical and numerical variables. Spearman correlation test was used to assess the relationship between awareness and waste disposal practices of dentists. A p-value of≤0.05 was considered as statistically significant. RESULTS: More than three fourth of the participants were aware of proper dental waste disposal steps. One half was aware of the color-coded segregation of biomedical waste management. Two third of the participants were deploying safe biomedical waste practices. Nearly 68% subjects allocated separate labeled containers for disposal of COVID-19 suspected patient's waste. Furthermore, 71.63% participants were practicing PCR test before aerosol procedures. While 88.65% participants believed that the COVID-19 pandemic has increased the financial burden in terms of safe practices and dental waste management. CONCLUSION: The awareness and practices of the participants towards dental waste management was found to be moderate. Satisfactory COVID-19 prevention and transmission measures were observed amongst the participants. BMW management lessons should be included in the academic curriculum and training program needs to be adopted for mass awareness.
Assuntos
COVID-19 , Gerenciamento de Resíduos , COVID-19/epidemiologia , Resíduos Odontológicos , Odontólogos , Conhecimentos, Atitudes e Prática em Saúde , Humanos , Pandemias , Papel Profissional , Gerenciamento de Resíduos/métodosRESUMO
The mucocele is the most common minor salivary gland associated disease of the oral cavity. It is also considered one of the most common biopsied oral lesions in pediatric patients. In recent years, extensive evidence has been published about the usage of lasers in treating mucoceles in pediatric patients. The aim of the present study was to assess the effectiveness of laser irradiation in the treatment of pediatric mucocele. An electronic search of databases (PubMed, Scopus, Web of Science and Google Scholar) was carried out in order to identify all relevant articles using a combination of the following keywords: "Pediatric", "Oral", "Mucocele", "Dental", "Oral Medicine", "Soft Dental Lasers", "Hard Dental Lasers", and "Lasers," for all case reports, case series, case-control and cohort studies published from 2007 to 2021. After limiting the search results, removing duplicate titles, and eligibility evaluation, 17 papers were enrolled in the study. Out of the total studies included, 10 articles were related to the diode (635 nm, 808 nm, 810 nm, and 980 nm), 5 to CO2 (10,600 nm), 3 to Er, Cr: YSGG (2780 nm), and 1 involving KTP lasers (532 nm). All studies indicated successful clinical results on mucocele excision with better intra- and post-operative indicators. The general characteristics and outcomes were summarized, and the quality of the studies was assessed using CARE guidelines in this systematic review. The reduction or absence of pain and bleeding, hemostasis, reduced operating time, minimal analgesic consumption, and an antibacterial effect were among the advantages of laser irradiation in the included studies. The laser has proven itself to play an effective role in the treatment of oral mucocele in paediatric patients.
RESUMO
OBJECTIVE: The objective of this systematic review was to investigate the quality and outcome of studies into artificial intelligence techniques, analysis, and effect in dentistry. MATERIALS AND METHODS: Using the MeSH keywords: artificial intelligence (AI), dentistry, AI in dentistry, neural networks and dentistry, machine learning, AI dental imaging, and AI treatment recommendations and dentistry. Two investigators performed an electronic search in 5 databases: PubMed/MEDLINE (National Library of Medicine), Scopus (Elsevier), ScienceDirect databases (Elsevier), Web of Science (Clarivate Analytics), and the Cochrane Collaboration (Wiley). The English language articles reporting on AI in different dental specialties were screened for eligibility. Thirty-two full-text articles were selected and systematically analyzed according to a predefined inclusion criterion. These articles were analyzed as per a specific research question, and the relevant data based on article general characteristics, study and control groups, assessment methods, outcomes, and quality assessment were extracted. RESULTS: The initial search identified 175 articles related to AI in dentistry based on the title and abstracts. The full text of 38 articles was assessed for eligibility to exclude studies not fulfilling the inclusion criteria. Six articles not related to AI in dentistry were excluded. Thirty-two articles were included in the systematic review. It was revealed that AI provides accurate patient management, dental diagnosis, prediction, and decision making. Artificial intelligence appeared as a reliable modality to enhance future implications in the various fields of dentistry, i.e., diagnostic dentistry, patient management, head and neck cancer, restorative dentistry, prosthetic dental sciences, orthodontics, radiology, and periodontics. CONCLUSION: The included studies describe that AI is a reliable tool to make dental care smooth, better, time-saving, and economical for practitioners. AI benefits them in fulfilling patient demand and expectations. The dentists can use AI to ensure quality treatment, better oral health care outcome, and achieve precision. AI can help to predict failures in clinical scenarios and depict reliable solutions. However, AI is increasing the scope of state-of-the-art models in dentistry but is still under development. Further studies are required to assess the clinical performance of AI techniques in dentistry.
Assuntos
Inteligência Artificial/tendências , Odontologia/métodos , Odontologia/tendências , Radiografia Dentária/métodos , Radiografia Dentária/tendências , Diagnóstico por Imagem , Previsões , Humanos , Aprendizado de Máquina , Redes Neurais de ComputaçãoRESUMO
OBJECTIVE: Analyzing and comparing the fit and accuracy of removable partial denture (RPDs) frameworks fabricated with CAD/CAM and rapid prototyping methods with conventional techniques. MATERIALS AND METHODS: The present systematic review was carried out according to PRISMA guidelines. The search was carried out on PubMed/MEDLINE, Cochrane collaboration, Science direct, and Scopus scientific engines using selected MeSH keywords. The articles fulfilling the predefined selection criteria based on the fit and accuracy of removable partial denture (RPD) frameworks constructed from digital workflow (CAD/CAM; rapid prototyping) and conventional techniques were included. RESULTS: Nine full-text articles comprising 6 in vitro and 3 in vivo studies were included in this review. The digital RPDs were fabricated in all articles by CAD/CAM selective laser sintering and selective laser melting techniques. The articles that have used CAD/CAM and rapid prototyping technique demonstrated better fit and accuracy as compared to the RPDs fabricated through conventional techniques. The least gaps between the framework and cast (41.677 ± 15.546 µm) were found in RPDs constructed through digital CAD/CAM systems. CONCLUSION: A better accuracy was achieved using CAD/CAM and rapid prototyping techniques. The RPD frameworks fabricated by CAD/CAM and rapid prototyping techniques had clinically acceptable fit, superior precision, and better accuracy than conventionally fabricated RPD frameworks.
Assuntos
Planejamento de Dentadura/métodos , Planejamento de Dentadura/tendências , Prótese Parcial Removível/tendências , Desenho Assistido por Computador/tendências , Prótese Parcial/tendências , Humanos , Lasers , Fluxo de TrabalhoRESUMO
The objective of this paper was to evaluate the existence of golden percentage in natural maxillary anterior teeth with the aid of 3D digital dental models and 2D photographs. And to propose regional values of golden percentage for restoration of maxillary anterior teeth. For this purpose, one hundred and ninety dentate subjects with sound maxillary anterior teeth were selected. Standardized frontal images were captured with DSLR, and the apparent width of maxillary anterior teeth was measured utilizing a software on a personal laptop computer. Once the dimensions were recorded, the calculations were made according to the golden percentage theory (GPT). The data were analyzed by independent and paired T-test. The level of significance was set at p < 0.05. The golden percentage values were not found in this study. The values obtained were 16%, 15%, 20%, 20%, 15%, and 16% moving from the right canine to the left canine teeth. There was no significant gender difference in the golden percentage values. Thus, golden percentage should not be used solely for the correction of anterior teeth or for determining dental attractiveness. Emphasis should be given to a range of dental proportion on regional basis.
Assuntos
Imageamento Tridimensional , Maxila/diagnóstico por imagem , Modelos Dentários , Fotografação , Dente/diagnóstico por imagem , Feminino , Humanos , Masculino , Adulto JovemRESUMO
This study aimed to compare the surface roughness, hardness, and flexure strength of interim indirect resin restorations fabricated with CAD-CAM (CC), 3D printing (3D), and conventional techniques (CV). Twenty disk (3 mm × Ø10 mm) and ten bar specimens (25 × 2 × 2 mm) were fabricated for the CC, 3D, and CV groups, to be used for surface roughness, micro-hardness, and flexural strength testing using standardized protocol. Three indentations for Vickers micro-hardness (VHN) were performed on each disk and an average was identified for each specimen. Surface micro-roughness (Ra) was calculated in micrometers (µm) using a 3D optical non-contact surface microscope. A three-point bending test with a universal testing machine was utilized for assessing flexural strength. The load was applied at a crosshead speed of 3 mm/min over a distance of 25 mm until fracture. Means and standard deviations were compared using ANOVA and post hoc Tukey-Kramer tests, and a p-value of ≤0.05 was considered statistically significant. Ra was significantly different among the study groups (p < 0.05). Surface roughness among the CC and CV groups was statistically comparable (p > 0.05). However, 3D showed significantly higher Ra compared to CC and CV samples (p < 0.05). Micro-hardness was significantly higher in 3D samples (p < 0.05) compared to CC and CV specimens. In addition, CC and CV showed comparable micro-hardness (p > 0.05). A significant difference in flexural strength was observed among the study groups (p < 0.05). CC and 3D showed comparable strength outcomes (p > 0.05), although CV specimens showed significantly lower (p < 0.05) strength compared to CC and 3D samples. The 3D-printed provisional restorative resins showed flexural strength and micro-hardness comparable to CAD-CAM fabricated specimens, and surface micro-roughness for printed specimens was considerably higher compared to CAD-CAM and conventional fabrication techniques.
RESUMO
BACKGROUND: E-learning is increasingly used during the COVID-19 pandemic, however the impact of this change on students is not known. This study aimed to evaluate perception and satisfaction of health sciences students towards E-learning during the COVID-19 lockdown. METHODS: A structured questionnaire was distributed to 2000 health care students either through email or social media platforms. The questionnaire was divided into two sections: the first section addressed demographic information such as age, education level, course of study, number of lectures attended and country. The second section gathered information on perception and satisfaction of students using 13 close-ended questions. Frequencies and percentages were assessed for demographic data, perception and satisfaction level of students. The paired sample t-test, independent t test and Spearman correlation were applied to evaluate statistical significance between different variables of the study. A p-value of <0.05 was considered significant. RESULTS: Data from 1255 participants were included at a response rate of 66.4%. More than one third (37%) of the students took 25 or more online E-learning sessions and 47% preferred Zoom as an online platform. Participants belonged to 11 countries from developed and developing nations. 41% reported interference of E-learning due to network problems. 60% considered that clinical and practical skills are best learned in clinics and laboratories. More than one third of the students preferred classroom teaching and 34% of the students did not feel confident enough to take exit exams after E-learning sessions. CONCLUSION: E-learning satisfaction levels were better among developed countries (7.34) compared to developing countries (5.82). The majority of participants agreed that E-learning was satisfactory in acquiring knowledge, however not effective in acquiring clinical and technical skills. As the COVID-19 lockdown eases, there is a need for improvement in the methods employed in E-learning and more blended learning among healthcare students is recommended.
Assuntos
Educação a Distância , Aprendizagem , Estudantes/psicologia , Adolescente , Adulto , COVID-19 , Educação a Distância/métodos , Educação a Distância/estatística & dados numéricos , Humanos , Pandemias , Percepção , Pesquisa Qualitativa , Inquéritos e QuestionáriosRESUMO
BACKGROUND: The aim of this study was to evaluate the self-perceived competency (FSPC) of medical faculty in E-Teaching and support received during the COVID-19 pandemic. METHODS: An online well-structured and validated faculty self-perceived competency questionnaire was used to collect responses from medical faculty. The questionnaire consisted of four purposely build sections on competence in student engagement, instructional strategy, technical communication and time management. The responses were recorded using a Likert ordinal scale (1-9). The Questionnaire was uploaded at www.surveys.google.com and the link was distributed through social media outlets and e-mails. Descriptive statistics and Independent paired t-test were used for analysis and comparison of quantitative and qualitative variables. A p-value of ≤0.05 was considered statistically significant. RESULTS: A total of 738 responses were assessed. Nearly 54% (397) participants had less than 5 years of teaching experience, 24.7% (182) had 6-10 years and 11.7% (86) had 11-15 years teaching expertise. 75.6% (558) respondents have delivered online lectures during the pandemic. Asynchronous methods were used by 61% (450) and synchronous by 39% (288) of participants. Moreover, 22.4% (165) participants revealed that their online lectures were evaluated by a structured feedback from experts, while 38.3% participants chose that their lectures were not evaluated. A significant difference (pâ<â0.01) was found between FSPC scores and online teaching evaluation by experts. The mean score of FSPC scale was 5.62±1.15. The mean score for student's engagement, instructional strategies, technical communication and time management were of 5.18±1.60, 5.67±1.61, 5.49±1.71 and 6.12±1.67 respectively. CONCLUSIONS: Medical faculty members were found somewhat competent in E-teaching for student engagement, instructional strategy, technical communication and time management skills. Faculty receiving feedback was more competent in comparison to peers teaching without feedback.
Assuntos
COVID-19 , Educação a Distância , Docentes de Medicina/psicologia , Competência Profissional , Autoimagem , COVID-19/epidemiologia , Comunicação , Feminino , Feedback Formativo , Humanos , Masculino , Pandemias , SARS-CoV-2 , Inquéritos e Questionários , Ensino/psicologia , Gerenciamento do TempoRESUMO
The world is currently facing a pandemic crisis due to a novel coronavirus. For this purpose, acquiring updated knowledge regarding prevention and disinfection during the current pandemic is necessary for every dental practitioner. In our study, we aimed to evaluate globally the level of knowledge and the attitude of dental practitioners related to disinfection. A total of 385 participants out of 401 participants from 23 different countries across the world were included in the final analysis after the exclusion of incomplete responses. The majority of the dentists who responded were females (53.8%) and were practicing at private health institutes (36.4%). The mean knowledge score of the participants was estimated to be 4.19 ± 1.88 out of 12, reflecting insufficient knowledge, and the mean attitude score of the participants was estimated to be 12.24 ± 3.23 out of 15, which shows a positive attitude toward disinfection practices during coronavirus 2019 (COVID-19). Thus, the current study indicated a lack of knowledge in fundamental aspects of disinfection protocols with a significant and positive attitude from dental health professionals toward disinfection regarding the coronavirus 2019 (COVID-19) pandemic.