Sulfenate Anion Catalyzed Diastereoselective Synthesis of Aziridines.

Aziridines are highly valued synthetic targets in organic and medicinal chemistry. The organocatalytic synthesis of such structures with broad substrate scope and good diastereoselectivity, however, is rare. Herein, we report a broadly applicable and diastereoselective synthetic method for the synthesis of trans-aziridines from imines and benzylic or alkyl halides utilizing sulfenate anions (PhSO- ) as the catalyst. Substrates bearing heterocyclic aromatic groups, alkyl, and electron-rich and electron-poor aryl groups were shown to be compatible with this method (33 examples), giving good yields and high diastereoselectivities (trans : cis >20 : 1). Further functionalization of aziridines containing cyclopropyl or cyclobutyl groups was achieved through ring-opening reactions, with a cyclobutyl-substituted norephedrine derivative obtained through a four-step synthesis. We offer a mechanistic proposal involving reversible addition of the deprotonated benzyl sulfoxide to the imine to explain the high trans-diastereoselectivity.

Metal-Free Solvent Promoted Oxidation of Benzylic Secondary Amines to Nitrones with H2O2.

An environmentally benign protocol for the generation of nitrones from benzylic secondary amines via catalyst-free oxidation of secondary amines using H2O2 in MeOH or CH3CN is described. This methodology provides a selective access to a variety of C-aryl nitrones in yields of 60 to 93%. Several studies have been performed to shed light on the reaction mechanism and the role of the solvent.

Catalytic Asymmetric 1,3-Dipolar Cycloaddition/Hydroamination Sequence: Expeditious Access to Enantioenriched Pyrroloisoquinoline Derivatives.

A three-step reaction sequence has been developed to prepare a variety of enantioenriched pyrroloisoquinoline derivatives. The process involves a catalytic asymmetric azomethine ylide 1,3-dipolar cycloaddition followed by an intramolecular AuI-catalyzed alkyne hydroamination and enamine reduction.

Stereoselective Ag-Catalyzed 1,3-Dipolar Cycloaddition of Activated Trifluoromethyl-Substituted Azomethine Ylides.

A silver-catalyzed 1,3-dipolar cycloaddition of fluorinated azomethine ylides and activated olefins is reported. The reaction offers a straightforward and atom-economical procedure for the preparation of fluorinated pyrrolidines. Broad scope and high levels of diastereoselectivity have been achieved simply by using AgOAc/PPh3 as the catalyst system. The high efficiency of the cycloaddition relies on the presence of a metal-coordinating group on the imine moiety, such as an ester or heteroaryl group. The asymmetric version of the cycloaddition has been developed by using Taniaphos as a chiral ligand.

Catalytic Asymmetric Synthesis of Bicycloprolines by a 1,3-Dipolar Cycloaddition/Intramolecular Alkylation Strategy.

The diastereoselective one-pot synthesis of hexahydrocyclopenta[b]pyrrole derivatives (bicycloprolines) has been achieved by base-mediated reactions of (E)-tert-butyl 6-bromo-2-hexenoate with α-imino esters. The catalytic asymmetric version of this process has been efficiently achieved using the Cu(I)/(R)-DTBM-Segphos complex as a catalyst following a two-step 1,3-dipolar cycloaddition/intramolecular alkylation sequence.

Alkenyl Arenes as Dipolarophiles in Catalytic Asymmetric 1,3-Dipolar Cycloaddition Reactions of Azomethine Ylides.

The use of alkenyl arenes as dipolarophiles in the catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides is reported. Under appropriate reaction conditions with a CuI or AgI catalyst either the exo or the endo adduct was obtained with high stereoselectivity. This process provides efficient access to highly enantiomerically enriched 4-aryl proline derivatives. The observed results are compatible with the blockage of one prochiral face of the 1,3-dipole, as well as with the efficient transmission of electrophilicity towards the terminal carbon atom of the dipolarophile. This polarization results in a change from a concerted to a stepwise mechanism.

Highly selective copper-catalyzed asymmetric [3+2] cycloaddition of azomethine ylides with acyclic 1,3-dienes.

The first examples of the catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides with acyclic activated 1,3-dienes (and 1,3-enynes) are described. Under copper catalysis, a selective cycloaddition at the terminal γ,δ-C=C bond is observed. In addition, depending on the ligand used, either the exo or the endo adduct can be obtained with high selectivity. Under appropriate reaction conditions, the acyclic 1,6-addition product is detected, suggesting a stepwise mechanism. The resulting C4-alkenyl-substituted pyrrolidines are suitable substrates for further access to polycyclic systems, as highlighted by the preparation of hexahydrochromeno[4,3-b]pyrrole and the tetracyclic core of the alkaloid gracilamine.

Atroposelective Synthesis of Axially Chiral Naphthylpyrroles by a Catalytic Asymmetric 1,3-Dipolar Cycloaddition/Aromatization Sequence.

A straightforward methodology for the enantioselective preparation of axially chiral 2-naphthylpyrroles has been developed. This protocol is based on a CuI/Fesulphos-catalyzed highly enantioselective 1,3-dipolar cycloaddition of an azomethine ylide followed by pyrrolidine alkylation and pyrrolidine to pyrrole oxidation. The mild conditions employed in the DDQ/blue light-mediated aromatization process facilitate an effective central-to-axial chirality transfer affording the corresponding pyrroles with high atroposelectivity.

Enantioselective transformations of 5-hydroxymethylfurfural via catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides.

A catalytic asymmetric 1,3-dipolar cycloaddition between iminoesters derived from 5-hydroxymethylfurfural (HMF) and different activated alkenes is reported. Excellent levels of diastereo and enantioselectivity were obtained when Fesulphos/CuI complex was used as catalyst. This metodology provides an effective and sustainable access to challenging enantioenriched heterocyclic scaffolds and represents one of the rare examples of catalytic asymmetric transformations using HMF as a starting material.

Au-catalyzed asymmetric formal [3 + 2] cycloaddition of isocyanoacetates with maleimides.

An efficient protocol for the Au(I)-catalyzed asymmetric formal [3 + 2] cycloaddition of isocyanoacetates with phenylmaleimide has been developed. In the presence of cationic Au(I)/DTBM-segphos complex, excellent diastereoselectivity and high levels of enantioselectivity (up to 97% ee) have been attained with a variety of α-substituted isocyanoacetates. The synthetic potential of the resulting enantioenriched 1-pyrrolines has been demonstrated by the preparation of highly substituted pyrrolidines bearing a quaternary stereocenter.

Catalytic enantioselective intramolecular 1,3-dipolar cycloaddition of azomethine ylides with fluorinated dipolarophiles.

An enantioselective synthesis of polycyclic fluorinated pyrrolidines has been achieved by Cu-catalyzed intramolecular 1,3-dipolar cycloaddition of azomethine ylides with fluorinated dipolarophiles. The method displays a wide scope and afforded the desired cycloadducts in high yields with up to 99% ee. These results demonstrate that fluoroalkyl substituents are excellent activating groups in this transformation.

A fully conjugated TTF-π-TCAQ system: synthesis, structure, and electronic properties.

The synthesis of the first fully conjugated tetrathiafulvalene-tetracyano-p-quinodimethane ((TTF)-TCNQ)-type system has been carried out by means of a Julia-Kocienski olefination reaction. In particular, a tetracyanoanthraquinodimethane (TCAQ) formyl derivative and two new sulfonylmethyl-exTTFs (exTTF = 2-[9-(1,3-dithiol-2-ylidene)anthracen-10(9H)-ylidene]-1,3-dithiole)--prepared as new building blocks--were linked. A variety of experimental conditions reveal that the use of sodium hexamethyldisilazane (NaHMDS) as base in THF afforded the E olefins with excellent stereoselectivity. Theoretical calculations at the B3LYP/6-31G** level point to highly distorted exTTF and TCAQ that form an almost planar stilbene unit between them. Although calculations predicted appreciable electronic communication between the donor and the acceptor, cyclic voltammetric studies did not substantiate this effect. It was only in photophysical assays that the electronic communication emerged in the form of a charge-transfer (CT) absorption and emission. Once photoexcited (i.e., the locally excited state or excited charge-transfer state), an ultrafast, subpicosecond charge separation leads to a radical ion pair state in which the spectroscopic features of the radical cation of exTTF as well as the radical anion of TCAQ are discernable. The radical ion pair is metastable and undergoes a fast ((1.0±0.2) ps) charge recombination to reconstitute the electronic ground state. Such ultrafast charge separation and recombination processes come as a consequence of the very short vinyl linkage between the two electroactive units.

Silver-catalyzed 1,3-dipolar cycloaddition of azomethine ylides with ß-boryl acrylates.

The Ag-catalyzed 1,3-dipolar cycloaddition of (Ε)-ß-borylacrylates with azomethine ylides is described. The resulting 3-borylpyrrolidine derivatives were obtained in high yields and complete endo selectivities using AgOAc/dppe as catalyst system and B(dam) as boryl group. Transformation of the B(dam) group into pinacol borane and oxidation afforded 3-hydroxyproline derivatives in high yields.

Aldehydes as Photoremovable Directing Groups: Synthesis of Pyrazoles by a Photocatalyzed [3+2] Cycloaddition/Norrish Type Fragmentation Sequence.

A straightforward methodology for the regioselective synthesis of pyrazoles has been developed by a domino sequence based on a photoclick cycloaddition followed by a photocatalyzed oxidative deformylation reaction. Distinguishing features of this protocol include an unprecedented photoredox-catalyzed Norrish type fragmentation under green-light irradiation and the use of α,ß-unsaturated aldehydes as synthetic equivalents of alkynes, where the aldehyde is acting as a novel photoremovable directing group.

Pyrrole and oligopyrrole synthesis by 1,3-dipolar cycloaddition of azomethine ylides with sulfonyl dipolarophiles.

A procedure for the synthesis of functionalized, substituted pyrroles by 1,3-dipolar cycloaddition of azomethine ylides has been developed. This protocol is based on the metal-catalyzed cycloaddition of alpha-iminoesters with sulfonyl dipolarophiles, followed by the base-promoted elimination of the sulfonyl groups. A wide variety of 2,5-disubstituted and 2,3,5- and 2,4,5-trisubstituted pyrroles have been prepared in satisfactory yields from 1,2-bis(sulfonyl ethylene), beta-sulfonylenones, and beta-sulfonylacrylates. This method can be applied in an iterative and straightforward manner to the construction of oligopyrroles, from bipyrroles to pentapyrroles. Iterative [n+1] and [n+2] approaches have been devised, the latter involves double 1,3-dipolar cycloaddition from pyrrolyl-based bis(iminoesters).

Cu-catalyzed asymmetric 1,3-dipolar cycloaddition of azomethine ylides with beta-phenylsulfonyl enones. Ligand controlled diastereoselectivity reversal.

A catalytic asymmetric procedure for the 1,3-dipolar cycloaddition of (E)-beta-phenylsulfonyl enones with azomethine ylides to provide highly functionalized pyrrolidine derivatives is described. In the presence of chiral Cu(I)-Segphos catalysts the adducts were obtained with high regio-, diastereo-, and enantioselectivity. Interestingly, a switch from endo to exo selectivity was observed when Segphos or DTBM-Segphos ligand was used.

Catalytic asymmetric synthesis of diazabicyclo[3.1.0]hexanes by 1,3-dipolar cycloaddition of azomethine ylides with azirines.

Substituted 1,3-diazabicyclo[3.1.0]hexanes with two contiguous quaternary stereocentres are readily prepared by catalytic asymmetric [3+2] cycloaddition of α-substituted iminoesters with azirines. High diastereoselectivities and enantioselectivities (up to 98% ee) are achieved using CuI/(R)-Fesulphos as the catalytic system.

Stereochemical diversity in pyrrolidine synthesis by catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides.

The pyrrolidine ring is a privileged structural motif in synthetic and medicinal chemisty. This review aims to highlight the high versatility of the catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides for access to different types of stereochemical patterns in enantioselective pyrrolidine synthesis. Special attention will be paid to stereodivergent procedures giving rise to different stereoisomers from the same starting materials.

Bis-sulfonyl ethylene as masked acetylene equivalent in catalytic asymmetric [3 + 2] cycloaddition of azomethine ylides.

Enantioenriched 3-pyrrolines have been synthesized by highly enantioselective Fesulphos-Cu-catalyzed 1,3-dipolar cycloaddition of azomethine ylides with trans-1,2-bisphenylsulfonyl ethylene, followed by reductive sulfonyl elimination. High levels of reactivity, exoselectivity, and enantioselectivity have been accomplished for a variety of substituted azomethine ylides. This cycloaddition-desulfonylation strategy has been applied as a key step in the enantioselective synthesis of a biologically active C-azanucleoside.

CuI-Catalyzed Asymmetric [3 + 2] Cycloaddition of Azomethine Ylides with Cyclobutenones.

The catalytic asymmetric 1,3-dipolar cycloaddition of cyclobutenones with azomethine ylides provides straightforward access to densely substituted 3-azabicyclo[3.2.0]heptanes. In the presence of CuI/(R)-Fesulphos as the catalytic system, high levels of diastereoselectivity and enantioselectivity were achieved (up to 98% enantiomeric excess (ee)).