RESUMO
The development of a dismantlable adhesion technology that allows switching between bonding and debonding states using external stimuli is important for realizing renewable and sustainable material cycles. Controlling the adhesion interface is an effective approach to manipulate the adhesion strength; however, research on dismantlable systems focusing on the interface has not been proceeded. Recently, we demonstrated a novel dismantlable system based on a stimuli-responsive molecular layer comprising cleavable anthracene dimers, which strengthen the initial adhesive force by forming chemical bonds between the substrate and adhesive and can be dismantled when required via stimulation-induced bond breaking. Here, we evaluate the use of the anthracene-based molecular layer with different components for verifying its versatility in the adhesive/dismantling system. The formation of the cleavable molecular layer by the stacking of relevant molecules enabled its usage with two types of adhesives, an epoxy adhesive and a silane-modified polymer adhesive. The initial adhesive strengths were improved in both types of molecular layers by creating chemical bonds at the adhesion interfaces. Light irradiation or heating stimuli for 1 min reduced the peel strength by up to 65%, and dismantling occurred in the cleavable photodimer layer. This study expands the versatile applicability of the molecular layer-based dismantling system.
RESUMO
Joining metals by adhesive bonding is essential in widespread fields such as mobility, dentistry, and electronics. Although adhesive technology has grown since the 1920s, the roles of interfacial phenomena in adhesive bonding are still elusive, which hampers the on-demand selection of surface treatment and adhesive types. In the present study, we clarified how chemical interactions and mechanical interlocking governed adhesive bonding by evaluating adhesion properties at the interfaces between epoxy/amine adhesive and two kinds of Al adherends: a flat aluminum hydroxide (AlxOyHz) and technical Al plate with roughness. Spectroscopic and microscopical data demonstrate that the protonation of the amino groups in an amine hardener converts Al(OH)3 on the AlxOyHz surface to AlO(OH). The interfacial protonation results in an interfacial dipole layer with positive charges on the adhesive side, whose electrostatic interaction increases the interfacial fracture energy. The double cantilever beam tests for the flat AlxOyHz and technical Al substrates clarify that the mechanical interlocking originating from the surface roughness further increases the fracture energy. This study disentangles the roles of the chemical interactions and mechanical interlocking occurring at the epoxy adhesive/Al interface in the adhesion mechanism.
RESUMO
The toughness and the durability under a high humidity condition of the interfaces in dissimilar adhesive joints of carbon-fiber-reinforced thermoplastic with a polyamide-6 matrix and Al alloy were evaluated by two test methods, in which a tensile opening load was applied to the specimens to cleave the interfaces apart in two different ways. In the double cantilever beam (DCB) test, the specimens were continuously pulled apart at a constant velocity, while in the wedge test, the specimens are pulled apart at a constant displacement. The crack growth along the interface in the DCB test was dynamically monitored with the assistance of mechanoluminescence for the accurate detection of the phenomena at the crack tip. The wedge test was employed for the evaluation of the durability of the interfaces under high humidity conditions. It was found that the adhesive joints were failed by various failure modes depending on the surface pretreatment and environmental conditions. Throughout the work, discussion was made concerned with the interfacial structures and the adhesion mechanism of dissimilar adhesive joints.
RESUMO
Molecular monolayer nanotubes produced by self-assembly of an amphiphile modified with a 2-nitrobenzyl group as a photoresponsive unit are able to encapsulate dinucleotides via electrostatic attraction. Upon photoirradiation, the 18 nm inner diameter of the nanotubes shrinks to less than 2 nm as a result of photochemical cleavage of the 2-nitrobenzyl group in the amphiphile. This shrinking of the nanotube channels leads to a propulsive release of the dinucleotides into the bulk solution and simultaneously accelerates formation of the dinucleotide duplexes. The larger nanotube channels without photoirradiation merely release each dinucleotide into the bulk solution, indicating that the squeezing via transportation in the narrow nanotube channels is necessary for duplex formation. In addition to the size effect, water with a lower polarity confined within the narrow nanotube channels helps to stabilize the energetically unfavorable hydrogen-bonded base pair between the dinucleotides. This system should enable researchers to perform biological reactions that occur only in specific environments and conditions in living organisms.
Assuntos
Nanotubos/química , Nucleotídeos/química , Fluorescência , Corantes Fluorescentes/química , Nanotubos/ultraestrutura , SoluçõesRESUMO
Self-assembly of azobenzene-modified amphiphiles (Glyn Azo, n=1-3) in water at room temperature in the presence of a protein produced nanotubes with the protein encapsulated in the channels. The Gly2 Azo nanotubes (7â nm internal diameter [i.d.]) promoted refolding of some encapsulated proteins, whereas the Gly3 Azo nanotubes (13â nm i.d.) promoted protein aggregation. Although the 20â nm i.d. channels of the Gly1 Azo nanotubes were too large to influence the encapsulated proteins, narrowing of the i.d. to 1â nm by trans-to-cis photoisomerization of the azobenzene units of the Gly1 Azo monomers packed in the solid bilayer membranes led to a squeezing out of the proteins into the bulk solution and simultaneously enhanced their refolding ratios. In contrast, photoinduced transformation of the Gly2 Azo nanotubes to short nanorings (<40â nm) with a large i.d. (28â nm) provided no further refolding assistance. We thus demonstrate that pertubation by the solid bilayer membrane wall of the nanotubes is important to accelerate refolding of the denatured proteins during their transport in the narrow nanotube channels.
Assuntos
Compostos Azo/química , Anidrases Carbônicas/química , Glicina/análogos & derivados , Nanotubos/química , Redobramento de Proteína , Tensoativos/química , Animais , Bovinos , Enzimas Imobilizadas/química , Isomerismo , Luz , Modelos Moleculares , Nanotubos/ultraestrutura , Processos Fotoquímicos , Desnaturação ProteicaRESUMO
The purpose of this study was to formulate a mathematical expression for the temperature dependence of adhesive strength using various parameters. Adhesive structures are typically exposed to a broad temperature range, spanning from low to high temperatures; therefore, understanding how their strength depends on temperature is crucial. The strength was measured through tensile, fatigue, and creep tests at temperatures ranging from -60 °C to 135 °C. The properties of these test types were thoroughly investigated by analyzing the strength of the test results from a thermal activity perspective. The results demonstrate that there is a clear relationship between temperature and strength. The intensity decreased with temperature according to the exponential function and could be accurately represented using the parameters of thermal activity. The temperature at which the strength begins to decrease in the fatigue test was higher than in the static tests. Consequently, we were able to accurately express the relationship between the temperature and intensity using certain parameters. Few studies successfully developed a precise nonlinear relationship between temperature and intensity using approximate expressions.
RESUMO
Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups (1) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal-isotropic phase-crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be -0.84. Heating enhances the thermal cis-to-trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.
RESUMO
Double cantilever beam (DCB) tests were conducted by immersing the specimens in temperature-controlled water while applying a creep load using a spring. By introducing a data reduction scheme to the spring-loaded DCB test method, it was confirmed that only a single parameter measurement was sufficient to calculate the energy release rate (ERR). Aluminum alloy substrates bonded with an epoxy adhesive were used, and DCB tests were performed by changing the initial load values, spring constants, and immersion temperatures for two types of surface treatment. The initial applied load and spring constant had no effect on the ERR threshold. In contrast, the threshold decreased with the increasing immersion temperature, but even in the worst case, it was 15% of the critical ERR in the static tests. Using the creep crack growth relationship, it was revealed that there were three phases of creep immersion crack growth in the adhesive joints, and each phase was affected by the temperature. The spring-loaded DCB test method has great potential for investigating the combined effects of creep, moisture, and temperature, and this study has demonstrated the validity of the test method. The long-term durability of adhesive joints becomes increasingly important, and this test method is expected to become widespread.
RESUMO
The azobenzene moiety, well-known not only for its reversible cis-to-trans photoisomerization but also as a hapten, does not induce antibodies on its own, but it reacts with antibodies raised against conjugates with protein carriers. Hence we selected azobenzene dye as an indicator to assess the possibility of having gold nano-particles act as an immunological carrier instead of protein carriers. In rabbits, we confirmed an in vivo response against azobenzene dye presented on the entire surface of gold nanoparticles (azo-nanoparticles), where the gold nanoparticles appeared to play a role as a carrier for the hapten. A high yield of immunoglobulin G (IgG) against the azobenzene derivative took place in rabbits injected with azo-nanoparticles, whereas no increase in IgG was recognized in other rabbits treated solely with chemically equivalent azobenzene dye instead of azo-nanoparticles. Electron microscopy and surface plasmon resonance spectroscopy indicated that the IgG obtained specifically recognized the difference between the isomer conformations of the azobenzene moiety.
Assuntos
Compostos Azo/química , Ouro/farmacologia , Haptenos/imunologia , Imunoglobulina G/biossíntese , Nanopartículas , Animais , Compostos Azo/imunologia , Corantes/química , Feminino , Imunoglobulina G/efeitos dos fármacos , Imunoglobulina G/ultraestrutura , Microscopia Eletrônica , Coelhos , Propriedades de SuperfícieRESUMO
Photocurable adhesives based on polymers and resins are an integral part of different production processes because of their fast curing and local area bonding ability. Recently, dismantlable adhesives have attracted a lot of attention for recycling adherends or replacement of adhesion defects. However, adhesives that allow repeatable bonding and debonding solely by light irradiation, i.e., without heat activation, are lacking. Here, ABA-type triblock copolymers consisting of poly(meth)acrylates bearing an azobenzene moiety (A block) and 2-ethylhexyl (B block) side chains were synthesized and utilized as photocurable adhesives. In contrast to the azo homopolymers, the block copolymer structure and incorporation of the soft middle block actualized a low concentration of the azobenzene moiety and consequently, higher flexibility of the resultant copolymers. This enabled film formation of the azobenzene-based adhesives and light-induced bonding for the first time. On the basis of the photoisomerization of the azobenzene moiety, changes in their viscoelastic property, i.e., softening and hardening, were induced by UV irradiation at 365 nm (50-100 mW cm-2) and green light irradiation at 520 nm (40 mW cm-2), respectively. In fact, two glass substrates were bonded with the self-standing polymer film, which was sequentially softened and hardened upon UV and green light irradiations. They exhibited shear strengths of 1.5-2.0 MPa, and UV irradiation lowered the adhesion strength to 0.5-0.1 MPa. Interestingly, the repeatable bonding and debonding abilities of the polymers were accomplished without loss of the adhesion strength.
RESUMO
Multiazobenzene compounds, hexakis-O-[4-(phenylazo)phenoxyalkylcarboxyl]-D-mannitols and hexakis-O-[4-(4-hexylphenylazo)phenoxyalkylcarboxyl]-D-mannitols, exhibit photochemically reversible liquefaction and solidification at room temperature. Their photochemical and thermal phase transitions were investigated in detail through thermal analysis, absorption spectroscopy, and dynamic viscoelasticity measurements, and were compared with those of other sugar-alcohol derivatives. Tensile shear strength tests were performed to determine the adhesions of the compounds sandwiched between two glass slides to determine whether the compounds were suitable for application as adhesives. The adhesions were varied by alternately irradiating the compounds with ultraviolet and visible light to photoinduce phase transitions. The azobenzene hexyl tails, lengths of the methylene spacers, and differences in the sugar-alcohol structures affected the photoresponsive properties of the compounds.
Assuntos
Adesivos/química , Álcoois/química , Compostos Azo/química , Carboidratos/química , Elasticidade , Isomerismo , Luz , Transição de Fase , Temperatura de Transição , Raios Ultravioleta , ViscosidadeRESUMO
The direct and reversible transformation of matter between the solid and liquid phases by light at constant temperature is of great interest because of its potential applications in various manufacturing settings. We report a simple molecular design strategy for the phase transitions: azobenzenes having para-dialkoxy groups with a methyl group at the meta-position. The photolithography processes were demonstrated using the azobenzene as a photoresist in a single process combining development and etching of a copper substrate.
RESUMO
Sugar alcohol derivatives with multi azobenzene arms are photochemically and isothermally liquefied from a powdered solid upon irradiation with ultraviolet light at room temperature, and then solidified on irradiation with visible light, where the transition between solid and liquid are reversible. These compounds possess similar chemical structures to comb-like liquid crystalline oligomers.
Assuntos
Compostos Azo/química , Luz , Álcoois Açúcares/química , Raios Ultravioleta , Transição de Fase , TemperaturaRESUMO
Microwrinkle grooves serve as open microchannel capillaries, where the capillary action depends on the wettability of a liquid on the groove surface. Here, we report the photoinduced capillary action of a liquid in such microwrinkle grooves. The wettability is changed through the irradiation of a photoresponsive microwrinkle surface. By utilizing micropattern light-projection apparatus, we prepare liquid filaments that fill only the microgrooves prescribed by the patterned light, with micrometer-scale spatial resolution. This new technology enables the precise spatial control of liquids on a solid surface, and thus, is applicable in the fields of micropatterning and open-channel microfluidics.
RESUMO
We demonstrate significant photoresponsivity in aqueous media to visible light of pseudo-oligonucleotides possessing 4-(dimethylamino)azobenzene (4-DMAzo) side chains. The spectrum of the 4-DMAzo moiety during 436 nm light irradiation at pH >9 was clearly different from that of the all (E)-form, indicating the presence of the (Z)-form. Thermal (Z)-to-(E) recovery isomerization was faster at pH 9 (k(Z)(-E) = approximately 10(1) s(-1)) than at pH 11; however, addition of 50% ethanol significantly slowed the thermal recovery isomerization at pH 9 (k(Z)(-E) = approximately 2 s(-1)) and increased the magnitude of the spectral changes. Significant photoregulation of DNA hybridization by visible light was demonstrated under this condition.
Assuntos
DNA/química , Oligonucleotídeos/química , p-Dimetilaminoazobenzeno/química , Soluções Tampão , Etanol/química , Concentração de Íons de Hidrogênio , Isomerismo , Luz , Hibridização de Ácido Nucleico/efeitos da radiação , Fotoquímica , Análise Espectral , Água/químicaRESUMO
The solid phase adsorption of crystal violet lactone (CVL) on five types of Stober silica nanopowders with BET specific surface areas in the range of 50-800 m2/g under dry milling conditions was described for the first time. The hydrogen bonding between surface silanol and the carboxylate of the ring-opened triphenylmethane dye (CVL+) led to the formation of monolayers of CVL+ in a flat-laid configuration. The lambda max of CVL+ in diffusive reflection visible spectra was influenced by the particle size of silica powders, suggesting that the microenvironmental polarity of adsorbed CVL+ is considerably reduced along with the decrease of the particle size. The solid phase adsorption of CVL obeyed Langmuir adsorption isotherms to give a saturated amount of CVL+ for every silica nanoparticle. The surface concentration of CVL+ on nanoparticles at the saturation was estimated to be 0.31 mg/m2 on average, disclosing that about 52% of the surface can be covered by CVL+ under the assumption that the BET-specific surface areas are equivalent to the real surfaces active for the CVL adsorption. The generation of the blue color of CVL provided a convenient means to estimate qualitative and quantitative analysis of the surface coverage with surface-active reagents, which conceal surface silanols. Subsequently, silica nanoparticles were milled with a surface modifier, followed by milling with CVL to observe the intensity of the blue color in order to disclose that the surface coverage with oligo- and polyethylene glycols as well as with nonionic surfactants by dry milling was specifically determined by the number of repeating oxyethylene units. Although the surface-active reagents were easily desorbed in water, the desorption was notably suppressed by milling with CVL, suggesting that the surface-modified particles with the surface-active reagents are covered with ultrathin films of CVL.