RESUMO
Understanding the mechanism that connects heat transport with crystal structures and order/disorder phenomena is crucial to develop materials with ultralow thermal conductivity (κ), for thermoelectric and thermal barrier applications, and requires the study of highly pure materials. We synthesized the n-type sulfide CuPbBi5S9 with an ultralow κ value of 0.6-0.4 W m-1 K-1 in the temperature range 300-700 K. In contrast to prior studies, we show that this synthetic sulfide does not exhibit the ordered gladite mineral structure but instead forms a copper-deficient disordered aikinite structure with partial Pb replacement by Bi, according to the chemical formula Cu1/3â¡2/3Pb1/3Bi5/3S3. By combining experiments and lattice dynamics calculations, we elucidated that the ultralow κ value of this compound is due to very low energy optical modes associated with Pb and Bi ions and, to a smaller extent, Cu. This vibrational complexity at low energy hints at substantial anharmonic effects that contribute to enhance phonon scattering. Importantly, we show that this aikinite-type sulfide, despite being a poor semiconductor, is a potential matrix for designing novel, efficient n-type thermoelectric compounds with ultralow κ values. A drastic improvement in the carrier concentration and thermoelectric figure of merit have been obtained upon Cl for S and Bi for Pb substitution. The Cu1-xâ¡xPb1-xBi1+xS3 series provides a new, interesting structural prototype for engineering n-type thermoelectric sulfides by controlling disorder and optimizing doping.
RESUMO
We report the synthesis of colloidal EuS, La2S3, and LaS2 nanocrystals between 150 and 255 °C using rare-earth iodides in oleylamine. The sulfur source dictates phase selection between La2S3 and LaS2, which are stabilized for the first time as colloidal nanocrystals. The indirect bandgap absorption of LaS2 shifts from 635 nm for nanoellipsoids to 365 nm for square-based nanoplates. Er3+ photoluminescence in La2S3:Er3+ (10%) is sensitized by the semiconducting host in the 390-450 nm range. The synthetic route yields tunable compositions of rare-earth sulfide nanocrystals. Interaction of light with these novel semiconducting nanostructures hosting rare-earth emitters should be attractive for applications that require broadband sensitization of RE emitters.
RESUMO
S-based semiconductors are attracting attention as environmentally friendly materials for energy-conversion applications because of their structural complexity and chemical flexibility. Here, we show that the delicate interplay between the chemical composition and cationic order/disorder allows one to stabilize a new sphalerite derivative phase of cubic symmetry in the Cu-Sn-S diagram: Cu22Sn10S32. Interestingly, its crystal structure is characterized by a semiordered cationic distribution, with the Cu-Sn disorder being localized on one crystallographic site in a long-range-ordered matrix. The origin of the partial disorder and its influence on the electronic and thermal transport properties are addressed in detail using a combination of synchrotron X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy, theoretical modeling, and transport property measurements. These measurements evidence that this compound behaves as a pseudogap, degenerate p-type material with very low lattice thermal conductivity (0.5 W m-1 K-1 at 700 K). We show that localized disorder is very effective in lowering κL without compromising the integrity of the conductive framework. Substituting pentavalent Sb for tetravalent Sn is exploited to lower the hole concentration and doubles the thermoelectric figure of merit ZT to 0.55 at 700 K with respect to the pristine compound. The discovery of this semiordered cubic sphalerite derivative Cu22Sn10S32 furthers the understanding of the structure-property relationships in the Cu-Sn-S system and more generally in ternary and quaternary Cu-based systems.
RESUMO
The new compound Rb10Mo39S43 has been synthesized as single crystals by a solid-state reaction in a sealed molybdenum crucible at 1500 °C. It constitutes the fifth member of the homologous series of the trigonal (space group R3Ì c) compounds Rb2n(Mo9S11)(Mo6nS6n+2). Consequently, its crystal structure is based on an equal mixture of Mo9S11 and Mo30S32 cluster units interlinked through Mo-S bonds with the Rb+ cations localized in the voids between the Mo9S11 and Mo30S32 units. The coexistence of the two high-nuclearity Mo9 and Mo30 clusters in the crystal structure leads to an unusual c parameter of 163.96(1) Å, and thus, Rb10Mo39S43 is the first ternary and multinary compound in solid-state chemistry to have such a large parameter. Contrary to the first four members, Rb10Mo39S43 was not found to be superconducting down to 2 K. First-principles calculations showed that the electronic structures of this series of compounds can be determined from those of the Mo9 and Mo6n clusters and that fewer interactions between clusters in Rb2n(Mo9S11)(Mo6nS6n+2) occur when n increases.
RESUMO
Mo-based cluster compounds are a large class of materials with complex crystal structures that give rise to very low lattice thermal conductivity. Here, we report on the crystal structure and transport property measurements (5-800 K) of the novel Tl-filled compound Ag3Tl2Mo15Se19. This compound adopts a crystal structure described in the rhombohedral R3 c space group [ a = 9.9601(1) Å, c = 57.3025(8) Å, and Z = 6] built by the covalent arrangement of octahedral Mo6 and bioctahedral Mo9 clusters in a 1:1 ratio, with the Ag and Tl atoms filling the large cavities between them. Transport property measurements performed on polycrystalline samples indicate that this compound behaves as a heavily doped semiconductor with mixed electrical conduction. Electronic band structure calculations combined with a semiclassical approach using the Boltzmann transport equation are in good agreement with these measurements. This compound exhibits a lattice thermal conductivity as low as 0.4 W m-1 K-1 because of highly disordered Ag and Tl atoms. Because of the low thermopower values induced by the mixed electrical conduction, the dimensionless thermoelectric figure of merit ZT remains moderate with a peak value of 0.18 at 750 K.
RESUMO
Herein, we investigate the Mo and W substitution for Cr in synthetic colusite, Cu26 Cr2 Ge6 S32 . Primarily, we elucidate the origin of extremely low electrical resistivity which does not compromise the Seebeck coefficient and leads to outstanding power factors of 1.94â mW m-1 K-2 at 700â K in Cu26 Cr2 Ge6 S32 . We demonstrate that the abnormally long iono-covalent T-S bonds competing with short metallic Cu-T interactions govern the electronic transport properties of the conductive "Cu26 S32 " framework. We address the key role of the cationic size-mismatch at the core of the mixed tetrahedral-octahedral complex over the transport properties. Two essential effects are identified: 1)â only the tetrahedra that are directly bonded to the [TS4 ]Cu6 complex are significantly distorted upon substitution and 2)â the major contribution to the disorder is localized at the central position of the mixed tetrahedral-octahedral complex, and is maximized for x=1, i.e. for the highest cationic size-variance, σ2 .
RESUMO
High-performance thermoelectric bulk sulfide with the colusite structure is achieved by controlling the densification process and forming short-to-medium range structural defects. A simple and powerful way to adjust carrier concentration combined with enhanced phonon scattering through point defects and disordered regions is described. By combining experiments with band structure and phonons calculations, we elucidate, for the first time, the underlying mechanism at the origin of intrinsically low thermal conductivity in colusite samples as well as the effect of S vacancies and antisite defects on the carrier concentration. Our approach provides a controlled and scalable method to engineer high power factors and remarkable figures of merit near the unity in complex bulk sulfide such as Cu26V2Sn6S32 colusites.
RESUMO
The possible existence of group 6 TM3 compounds with T = Cr, Mo, W and M = Ga, In is investigated with the aid of density functional theory calculations. Their most probable crystal structure is expected to be of the FeGa3 type tetragonal space group P42/mnm. All compounds are computed to be semiconductors with a band gap ranging from 0.08 to 0.43 eV, at the modified Becke-Johnson level of theory. The thermoelectric properties are analyzed via calculations based on Boltzmann transport equation under a constant relaxation time approximation. Promising power factors are computed for both n- and p-type WGa3 because of a band degeneracy around the Fermi level similar to that of heavily doped PbTe and SnTe materials. If the optimal chemical potential can be reached, a thermoelectric figure of merit up to 0.6 at 800 K for both n- and p-type may be expected for WGa3.
RESUMO
Mo-based cluster compounds are promising materials for high-temperature thermoelectric applications due to their intrinsic, extremely low thermal conductivity values. In this study, polycrystalline cluster compounds Cs2CuxMo12Se14 were prepared for a wide range of Cu contents (0 ≤ x ≤ 2). All samples crystallize isostructurally in the trigonal space group R3Ì . The position of the Cu atoms in the unit cell was determined by X-ray diffraction on a single-crystalline specimen indicating that these atoms fill the empty space between the Mo-Se clusters. Density functional theory calculations predict a metallic ground state for all compositions, in good agreement with the experimental findings. Magnetization measurements indicate a rapid suppression of the superconducting state that develops in the x = 0.0 sample upon Cu insertion. Transport properties measurements, performed in a wide temperature range (2-630 K) on the two end-member compounds x = 0 and x = 2, revealed a multiband electrical conduction as shown by sign reversal of the thermopower as a function of temperature.
RESUMO
We report on a detailed investigation of the crystal and electronic band structures and of the transport and thermodynamic properties of the Mo-based cluster compound Ag2Tl2Mo9Se11. This novel structure type crystallizes in the trigonal space group R3Ì c and is built of a three-dimensional network of interconnected Mo9Se11 units. Single-crystal X-ray diffraction indicates that the Ag and Tl atoms are distributed in the voids of the cluster framework, both of which show unusually large anisotropic thermal ellipsoids indicative of strong local disorder. First-principles calculations show a weakly dispersive band structure around the Fermi level as well as a semiconducting ground state. The former feature naturally explains the presence of both hole-like and electron-like signals observed in Hall effect. Of particular interest is the very low thermal conductivity that remains quasi-constant between 150 and 800 K at a value of approximately 0.6 W·m(-1)·K(-1). The lattice thermal conductivity is close to its minimum possible value, that is, in a regime where the phonon mean free path nears the mean interatomic distance. Such extremely low values likely originate from the disorder induced by the Ag and Tl atoms giving rise to strong anharmonicity of the lattice vibrations. The strongly limited ability of this compound to transport heat is the key feature that leads to a dimensionless thermoelectric figure of merit ZT of 0.6 at 800 K.
RESUMO
We discuss the application of the Agapito Curtarolo and Buongiorno Nardelli (ACBN0) pseudo-hybrid Hubbard density functional to several transition metal oxides. For simple binary metal oxides, ACBN0 is found to be a fast, reasonably accurate and parameter-free alternative to traditional DFT + U and hybrid exact exchange methods. In ACBN0, the Hubbard energy of DFT + U is calculated via the direct evaluation of the local Coulomb and exchange integrals in which the screening of the bare Coulomb potential is accounted for by a renormalization of the density matrix. We demonstrate the success of the ACBN0 approach for the electronic properties of a series technologically relevant mono-oxides (MnO, CoO, NiO, FeO, both at equilibrium and under pressure). We also present results on two mixed valence compounds, Co3O4 and Mn3O4. Our results for these binary oxides and all the materials we have investigated, obtained at the computational cost of a standard LDA/PBE calculation, are in excellent agreement with hybrid functionals, the GW approximation and experimental measurements.