Shielding and dosimetry parameters for aluminum carbon steel.

Aluminum is lightweight durable, versatile, non-toxic, and corrosion-resistant surface, which makes aluminum a perfect material for improving the corrosion properties of aluminum-carbon steel which is important in the radiation domain. In this study, six carbon steel alloys doped with different aluminum concentrations were studied and compared with the standard austenite stainless steel AISI316L. Different parameters for shielding and dosimetry such as mass attenuation coefficient, tenth value layer, mean free path, equivalent effective atomic and electronic numbers were calculated using WinXCom, while the exposure absorption buildup factors, thermal and fast neutron removal cross-sections were calculated using MCNPX and the effective conductivity was calculated using Phy-X/PSD program. Regarding the radiation shielding performance, the addition of aluminum to the carbon alloys has a significant influence on the shielding parameters. The results suggest that the addition of aluminum to the carbon steel alloys would improve its shielding properties so that it is a good result to be used in the field of dosimetry and radiation shielding.

Structural and Tribological Characterization of Carbon and Glass Fabrics Reinforced Epoxy for Bushing Applications Safety.

This article investigates the effect of geometrical alternatives for fiber directions on the structural and tribological properties of glass and carbon fibers when molded with epoxy as polymeric composite fabrics for the safety and quality of bushing applications. To confirm the best composite fabric direction, scanning electron microscope and tribological analyses were carried out for the glass and carbon fabrics at horizontal and vertical geometrical alternative orientations. The tribological test was applied using a pin-on-disk tribometer at constant bark velocity of 0.520 m/s against different loads, beginning with 5, 10, 15, and 20 N for the investigated composite samples. The structural measurements demonstrated that the carbon fiber had a high ability to merge with the resin epoxy when compared with the glass fiber. The tribological analysis elucidated that the lower wear volume loss and friction coefficient were obtained when molding the resin epoxy horizontally to the fiber-stacking direction compared with the other vertical direction. Accordingly, the study deduced that the carbon fiber composite material achieves superior wear resistance when molded by resin epoxy horizontally to the direction of tribological wear, which is suitable for several advanced bushing applications.

Mechanical and radiation shielding characterization of W-based alloys for advanced nuclear unit.

The paper aims to investigate the mechanical and radiation shielding properties of two tungsten-based alloys manufactured by powder technology; their features when compared with two standard stainless steel grades for advanced nuclear applications. Multiple measurements were performed to characterize the alloys' structural and mechanical properties. XRD analysis and average surface roughness measurements showed the crystalline and morphological structure of the alloys. Surface microhardness added to the abrasive wear analysis showed the final wear resistance of the selected alloys. In addition, the shielding features against gamma and fast neutrons radiation were calculated. The superior characteristics of W-based alloys manufactured by powder technology make them suitable to be used in advanced nuclear power units.

Improving the properties of commercial steel alloys in the industrial/nuclear field by RF plasma carbonitriding.

The study investigates the effect of RF plasma on the commercial SS201 and Steel alloys physical, structural and nuclear properties, using an atmosphere of nitrogen (85%) plus acetylene (15%) at 500 W working for 0.5 h. The results were compared with untreated alloys and AISI304L. The study indicated the ability of RF plasma to improve both the mechanical and tribological properties of treated alloys compared to the original commercial alloys and the AISI304L, and achieve good shielding properties for industrial/nuclear applications.

Influence of heat treatment on the mechanical and the lubricant wear characteristics of stainless-steel grades against 5 wt% NaCl as industrial shielding materials.

This article investigates the impact of the heat treatment, and lubricant wear measurements at 5 wt % NaCl solution, mechanical and radiation shielding properties of three grades of stainless steels: SS316, M303, and SS201. The obtained results showed that heat-treated martensitic stainless-steel grade has improved mechanical and tribological properties while heat-treated austenitic stainless-steel grades showed deteriorated wear resistance. The radiation shielding parameters of the studied grades are comparable. The effectiveness of heat treatment in the presence of NaCl solution is verified.

A Novel C@Fe@Cu Nanocomposite Loaded with Doxorubicin Tailored for the Treatment of Hepatocellular Carcinoma.

High mortality and morbidity rates are related to hepatocellular carcinoma (HCC), which is the most prevalent type of liver cancer. A new vision for cancer treatment and cancer cell targeting has emerged with the application of nanotechnology, which reduces the systemic toxicity and adverse effects of chemotherapy medications while increasing their effectiveness. It was the goal of the proposed work to create and investigate an anticancer C@Fe@Cu nanocomposite (NC) loaded with Doxorubicin (DOX) for the treatment of HCC. Scanning and transmission electron microscopes (SEM and TEM) were used to examine the morphology of the produced NC. The formulation variables (DOX content, C@Fe@Cu NC weight, and stirring speed) were analyzed and optimized using Box-Behnken Design (BBD) and Response Surface Methodology (RSM). Additionally, X-ray diffraction patterns (XRD) and Fourier Transform Infrared (FTIR) were investigated. Doxorubicin and DOX- loaded C@Fe@Cu NC (DOX-C@Fe@Cu NC) were also assessed against HEPG2 cells for anticancer efficacy (Hepatic cancer cell line). The results revealed the formation of C@Fe@Cu NC with a mean size of 7.8 nm. A D-R model with a mean size of 24.1 nm best fits the adsorption behavior of DOX onto the C@Fe@Cu NC surface. DOX-C@Fe@Cu NC has also been demonstrated to have a considerably lower IC50 and higher cytotoxicity than DOX alone in an in vitro investigation. Therefore, DOX-C@Fe@Cu NC is a promising DOX delivery vehicle for the full recovery of HCC.

Tailoring of Novel Azithromycin-Loaded Zinc Oxide Nanoparticles for Wound Healing.

Skin is the largest mechanical barrier against invading pathogens. Following skin injury, the healing process immediately starts to regenerate the damaged tissues and to avoid complications that usually include colonization by pathogenic bacteria, leading to fever and sepsis, which further impairs and complicates the healing process. So, there is an urgent need to develop a novel pharmaceutical material that promotes the healing of infected wounds. The present work aimed to prepare and evaluate the efficacy of novel azithromycin-loaded zinc oxide nanoparticles (AZM-ZnONPs) in the treatment of infected wounds. The Box-Behnken design and response surface methodology were used to evaluate loading efficiency and release characteristics of the prepared NPs. The minimum inhibitory concentration (MIC) of the formulations was determined against Staphylococcus aureus and Escherichia coli. Moreover, the anti-bacterial and wound-healing activities of the AZM-loaded ZnONPs impregnated into hydroxyl propyl methylcellulose (HPMC) gel were evaluated in an excisional wound model in rats. The prepared ZnONPs were loaded with AZM by adsorption. The prepared ZnONPs were fully characterized by XRD, EDAX, SEM, TEM, and FT-IR analysis. Particle size distribution for the prepared ZnO and AZM-ZnONPs were determined and found to be 34 and 39 nm, respectively. The mechanism by which AZM adsorbed on the surface of ZnONPs was the best fit by the Freundlich model with a maximum load capacity of 160.4 mg/g. Anti-microbial studies showed that AZM-ZnONPs were more effective than other controls. Using an experimental infection model in rats, AZM-ZnONPs impregnated into HPMC gel enhanced bacterial clearance and epidermal regeneration, and stimulated tissue formation. In conclusion, AZM -loaded ZnONPs are a promising platform for effective and rapid healing of infected wounds.