Ambulatory extracorporeal membrane oxygenation simulator: The next frontier in clinical training.

BACKGROUND: Current medical simulators for extracorporeal membrane oxygenation (ECMO) are expensive and rely on low-fidelity methodologies. This creates a challenge that demands a new approach to eliminate high costs and integrate with critical care environments, especially in light of the scarce resources and supplies available after the COVID-19 pandemic. METHODS: To address this challenge, we examined the current state-of-the-art medical simulators and collaborated closely with Hamad Medical Corporation (HMC), the primary healthcare provider in Qatar, to establish criteria for advancing the cutting-edge ECMO simulation. This article presents a comprehensive ambulatory high-realism and cost-effective ECMO simulator. RESULTS: Over the past 3 years, we have surveyed relevant literature, gathered data, and continuously developed a prototype of the system modules and the accompanying tablet application. By doing so, we have successfully addressed the issue of cost and fidelity in ECMO simulation, providing an effective tool for medical professionals to improve their understanding and treatment of patients requiring ECMO support. CONCLUSIONS: This paper will focus on presenting an overall ambulatory ECMO simulator, detailing the various sub-systems and emphasizing the modular casing of the physical components and the simulated patient monitor.

IoT-based mock oxygenator for extracorporeal membrane oxygenation simulator.

BACKGROUND: Training is an essential aspect of providing high-quality treatment and ensuring patient safety in any medical practice. Because extracorporeal membrane oxygenation (ECMO) is a complicated operation with various elements, variables, and irregular situations, doctors must be experienced and knowledgeable about all conventional protocols and emergency procedures. The conventional simulation approach has a number of limitations. The approach is intrinsically costly since it relies on disposable medical equipment (i.e., oxygenators, heat exchangers, and pumps) that must be replaced regularly due to the damage caused by the liquid used to simulate blood. The oxygenator, which oxygenates the blood through a tailored membrane in ECMO, acts as a replacement for the patient's natural lung. For the context of simulation-based training (SBT) oxygenators are often expensive and cannot be recycled owing to contamination issues. METHODS: Consequently, it is advised that the training process include a simulated version of oxygenators to optimize reusability and decrease training expenses. Toward this goal, this article demonstrates a mock oxygenator for ECMO SBT, designed to precisely replicate the real machine structure and operation. RESULTS: The initial model was reproduced using 3D modeling and printing. Additionally, the mock oxygenator could mimic frequent events such as pump noise and clotting. Furthermore, the oxygenator is integrated with the modular ECMO simulator using cloud-based communication technology that goes in hand with the internet of things technology to provide remote control via an instructor tablet application. CONCLUSIONS: The final 3D modeled oxygenator body was tested and integrated with the other simulation modules at Hamad Medical Corporation with several participants to evaluate the effectiveness of the training session.

A skills acquisition study on ECMOjo: a screen-based simulator for extracorporeal membrane oxygenation.

BACKGROUND: Extracorporeal membrane oxygenation relies heavily on didactic teaching, emphasizing on essential cognitive skills, but overlooking core behavioral skills such as leadership and communication. Therefore, simulation-based training has been adopted to instill clinical knowledge through immersive experiences. Despite simulation-based training's effectiveness, training opportunities are lessened due to high costs. This is where screen-based simulators come into the scene as affordable and realistic alternatives. AIM: This article evaluates the educational efficacy of ECMOjo, an open-source screen-based extracorporeal membrane oxygenation simulator that aims to replace extracorporeal membrane oxygenation didactic instruction in an interactive and cost-effective manner. METHOD: A prospective cohort skills acquisition study was carried out. A total of 44 participants were pre-assessed, divided into two groups, where the first group received traditional didactic teaching, and the second used ECMOjo. Participants were then evaluated through a wet lab assessment and two questionnaires. RESULTS: The obtained results indicate that the two assessed groups show no statistically significant differences in knowledge and efficacy. Hence, ECMOjo is considered an alternative to didactic teaching as per the learning outcomes. CONCLUSION: The present findings show no significant dissimilarities between ECMOjo and didactic classroom-based teaching. Both methods are very comparable in terms of the learner's reported self-efficacy and complementary to mannequin-based simulations.

Extracorporeal membrane oxygenation simulation-based training: methods, drawbacks and a novel solution.

INTRODUCTION: Patients under the error-prone and complication-burdened extracorporeal membrane oxygenation (ECMO) are looked after by a highly trained, multidisciplinary team. Simulation-based training (SBT) affords ECMO centers the opportunity to equip practitioners with the technical dexterity required to manage emergencies. The aim of this article is to review ECMO SBT activities and technology followed by a novel solution to current challenges. ECMO SIMULATION: The commonly-used simulation approach is easy-to-build as it requires a functioning ECMO machine and an altered circuit. Complications are simulated through manual circuit manipulations. However, scenario diversity is limited and often lacks physiological and/or mechanical authenticity. It is also expensive to continuously operate due to the consumption of highly specialized equipment. TECHNOLOGICAL AID: Commercial extensions can be added to enable remote control and to automate circuit manipulation, but do not improve on the realism or cost-effectiveness. A MODULAR ECMO SIMULATOR: To address those drawbacks, we are developing a standalone modular ECMO simulator that employs affordable technology for high-fidelity simulation.

Using thermochromism to simulate blood oxygenation in extracorporeal membrane oxygenation.

INTRODUCTION: Extracorporeal membrane oxygenation (ECMO) training programs employ real ECMO components, causing them to be extremely expensive while offering little realism in terms of blood oxygenation and pressure. To overcome those limitations, we are developing a standalone modular ECMO simulator that reproduces ECMO's visual, audio and haptic cues using affordable mechanisms. We present a central component of this simulator, capable of visually reproducing blood oxygenation color change using thermochromism. METHODS: Our simulated ECMO circuit consists of two physically distant modules, responsible for adding and withdrawing heat from a thermochromic fluid. This manipulation of heat creates a temperature difference between the fluid in the drainage line and the fluid in the return line of the circuit and, hence, a color difference. RESULTS: Thermochromic ink mixed with concentrated dyes was used to create a recipe for a realistic and affordable blood-colored fluid. The implemented "ECMO circuit" reproduced blood's oxygenation and deoxygenation color difference or lack thereof. The heat control circuit costs 300 USD to build and the thermochromic fluid costs 40 USD/L. During a ten-hour in situ demonstration, nineteen ECMO specialists rated the fidelity of the oxygenated and deoxygenated "blood" and the color contrast between them as highly realistic. CONCLUSIONS: Using low-cost yet high-fidelity simulation mechanisms, we implemented the central subsystem of our modular ECMO simulator, which creates the look and feel of an ECMO circuit without using an actual one.

Addressing the challenges of ECMO simulation.

INTRODUCTION/AIM: The patient's condition and high-risk nature of extracorporeal membrane oxygenation (ECMO) therapy force clinical services to ensure clinicians are properly trained and always ready to deal effectively with critical situations. Simulation-based education (SBE), from the simplest approaches to the most immersive modalities, helps promote optimum individual and team performance. The risks of SBE are negative learning, inauthenticity in learning and over-reliance on the participants' suspension of disbelief. This is especially relevant to ECMO SBE as circuit/patient interactions are difficult to fully simulate without confusing circuit alterations. METHODS: Our efforts concentrate on making ECMO simulation easier and more realistic in order to reduce the current gap there is between SBE and real ECMO patient care. Issues to be overcome include controlling the circuit pressures, system failures, patient issues, blood colour and cost factors. Key to our developments are the hospital-university collaboration and research funding. RESULTS: A prototype ECMO simulator has been developed that allows for realistic ECMO SBE. The system emulates the ECMO machine interface with remotely controllable pressure parameters, haemorrhaging, line chattering, air bubble noise and simulated blood colour change. CONCLUSION: The prototype simulator allows the simulation of common ECMO emergencies through innovative solutions that enhance the fidelity of ECMO SBE and reduce the requirement for suspension of disbelief from participants. Future developments will encompass the patient cannulation aspect.

A Modular Approach for a Patient Unit for Extracorporeal Membrane Oxygenation Simulator.

Despite many advancements in extracorporeal membrane oxygenation (ECMO), the procedure is still correlated with a high risk of patient complications. Simulation-based training provides the opportunity for ECMO staff to practice on real-life scenarios without exposing ECMO patients to medical errors while practicing. At Hamad Medical Corporation (HMC) in Qatar, there is a critical need of expert ECMO staff. Thus, a modular ECMO simulator is being developed to enhance the training process in a cost-effective manner. This ECMO simulator gives the instructor the ability to control the simulation modules and run common simulation scenarios through a tablet application. The core modules of the simulation system are placed in the patient unit. The unit is designed modularly such that more modules can be added throughout the simulation sessions to increase the realism of the simulation sessions. The new approach is to enclose the patient unit in a trolley, which is custom-designed and made to include all the components in a modular fashion. Each module is enclosed in a separate box and then mounted to the main blood simulation loop box using screws, quick connect/disconnect liquid fittings, and electrical plugs. This method allows fast upgrade and maintenance for each module separately as well as upgrading modules easily without modifying the trolley's design. The prototype patient unit has been developed for portability, maintenance, and extensibility. After implementation and testing, the prototype has proven to successfully simulate the main visual and audio cues of the real emergency scenarios, while keeping costs to a minimum.

Advanced Thermochromic Ink System for Medical Blood Simulation.

Simulators for extracorporeal membrane oxygenation (ECMO) have problems of bulky devices and low-fidelity methodologies. Hence, ongoing efforts for optimizing modern solutions focus on minimizing expenses and blending training with the intensive care unit. This is particularly evident following the coronavirus pandemic, where economic resources have been extensively cut. In this paper, as a part of an ECMO simulator for training management, an advance thermochromic ink system for medical blood simulation is presented. The system was developed and enhanced as a prototype with successful and reversible transitions between dark and bright red blood color to simulate blood oxygenation and deoxygenation in ECMO training sessions.