Polycyclic aromatic hydrocarbons as model solutes for carbon nanomaterials in ionic liquids.

The aim of this work is to understand the details of the interactions of ionic liquids with carbon nanomaterials (graphene and nanotubes) using polyaromatic compounds as model solutes. We have combined the measurements of thermodynamic quantities of solvation with molecular dynamics simulations to provide a microscopic view. The solubility of five polycyclic aromatic hydrocarbons (naphthalene, anthracene, phenanthrene, pyrene and coronene) was determined in seven ionic liquids ([C4C1im][C(CN)3], [C4C1pyrr][Ntf2], [C10C1im][Ntf2], [C2C1im][C(CN)3], [C2C1im][Ntf2], [C3C1pyrr][N(CN)2] and [C4C1im][N(CN)2]) at 298 K. The enthalpies of the dissolution of naphthalene, anthracene and pyrene were measured in four of the ionic liquids. Free energies were estimated from those measurements in order to analyse the entropic or enthalpic contributions to the dissolution process. Molecular dynamics simulations provided solvation free energies that were compared to experimental and structural information. Spatial distributions of solvent ions around the solutes when combined with IR measurements elucidate the structure of solvation environments. Interactions between the imidazolium rings of cations and the π system of the solutes have been identified. However, ionic liquids with pyrrolidinium cations appeared as better solvents due to favourable enthalpic contributions compared to imidazolium cations. Long alkyl side chains on cations lead to higher solubility and lower enthalpy of dissolution by creating a "softer" solvation environment. Considering the effect of anions, small and planar anions lead to higher solubilities and lower enthalpies of dissolution of polyaromatic hydrocarbons. These findings provide the design principles based on molecular interactions and the structure of solvation environments to choose or formulate ionic liquids in view of their affinity for carbon nanomaterials.

Importance of the Electrostatic Correlations in Surface Tension of Hydrated Reline Deep Eutectic Solvent from Combined Experiments and Molecular Dynamics Simulations.

In this study, the surface tension and the structure of hydrated reline are investigated by using diverse methods. Initially, the surface tension displays a nonlinear pattern as water content increases, decreasing until reaching 45 wt %, then gradually matching that of pure water. This fluctuation is associated with strong electrostatic correlations present in pure reline, which decrease as more water is added. Changes in surface tension reflect a shift from charge layering in pure reline to an increased interfacial hydrogen bonding as the water content rises. This shift causes the segregation of urea molecules into the bulk phase and a gradual anchoring of water molecules to the air-reline interface. An interesting observation is the antisurfactant effect, where heightened interfacial anchoring results in an unexpected increase in real contribution of surface tension. This, along with weakened electrostatic correlations beyond 45 wt % due to reinforced interfacial hydrogen bonding, contributes to the complex behavior of surface tension observed in this study.

Time-concentration profiles of tire particle additives and transformation products under natural and artificial aging.

Tire and road wear particles (TRWP) are polymer-based microparticles that are emitted into the environment during tire usage. Growing efforts are currently being made to quantify these emissions, characterize the leachates and assess their environmental impact. This study aimed to investigate the effect of aging on TRWP composition. Cryomilled tire tread particles (CMTTP) and TRWP were exposed for different durations to three aging conditions: accelerated thermal and photochemical aging and natural outdoor aging. Particles were then extracted with cyclohexane/ethanol. The time-concentration profiles of 23 additives and transformation products present in these extracts were determined by UHPLC-HRMS. Several chemicals, such as N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6-PPD) or 1,3-diphenylguanidine (DPG), decayed exponentially under all aging conditions, with half-lives of a few days under artificial photoaging versus dozens of days under pure thermal aging at 60 °C. The natural aging profiles lie between those 2 laboratory aging conditions. Other chemicals, such as 6PPD-quinone, presented bell-shaped concentration profiles within CMTTP when particles were exposed to UV light. 6PPD-quinone reached a maximal concentration within a month under natural aging. For TRWP, the initial load of 6PPD-quinone had already reached a maximum prior to the aging experiments and decreased exponentially under natural aging with a half-life below one month. Pure thermal aging induced a significantly slower decay of 6PPD-quinone within TRWP (half-life of half a year), emphasizing a greater stability and persistence in environmental compartments without light. This study highlighted that the more readily accessible CMTTP could be considered a reasonable proxy of TRWP to investigate the fate of chemicals within rubber particles, at least from a qualitative standpoint. Overall, the concentrations of 20 of the evaluated chemicals decreased by >50 % within 50 days under natural aging.

Natural deep eutectic solvents as thermostabilizer for Humicola insolens cutinase.

As a new generation of green solvents, deep eutectic solvents (DESs) are considered a promising alternative to current harsh organic solvents and find application in many chemical processing methods such as extraction and synthesis. DESs, normally formed by two or more components via various hydrogen bond interactions, offer high potential as medium for biocatalysis reactions where they can improve efficiency by enhancing substrate solubility and the activity and stability of the enzymes. In the current study, the stabilization of Humicola insolens cutinase (HiC) in natural deep eutectic solvents (NADESs) was assessed. The best hydrogen bond donor among sorbitol, xylitol, erythritol, glycerol and ethylene glycol, and the best acceptor among betaine, choline chloride, choline acetate, choline dihydrogen citrate and tetramethylammonium chloride, were selected, evaluating binding energies and molecular orientations through molecular docking simulations, and finally used to prepare NADES aqueous solutions. The effects of component ratio and NADES concentration on HiC thermostability at 90 °C were also investigated. The choline dihydrogen citrate:xylitol, in a 1:1 ratio with a 20 wt% concentration, was selected as the best combination in stabilizing HiC, increasing its half-life three-fold.

Reactive sputtering onto an ionic liquid, a new synthesis route for bismuth-based nanoparticles.

Metallic bismuth and Bi-oxyfluoride nanoparticles (NPs) are successfully synthesized by non-reactive and reactive sputtering of a Bi target onto 1-butyl-3-methylimidazolium bis(trifluoro-methylsulfonyl)imide ([BMIM][TFSI]) ionic liquid (IL). Non-reactive sputtering is realized in pure Ar plasma, where isotropic, well crystallized and dispersed Bi NPs of 3-7 nm are obtained. The diameter and the size distribution of these NPs do not significantly vary with the power, gas pressure, and sputtering time; but these sputtering parameters seem to influence the NP concentration. Then, the introduction of O2 and CF4 gases in addition to Ar enables the reaction of radicals from plasma with Bi clusters at the liquid's top surface to form Bi-oxyfluoride NPs of 3-12 nm in diameter with photocatalytic activity. Hence, the reactive sputtering onto an IL is an efficient, original and promising method for synthesizing Bi-based compound NPs. Finally, we propose a mechanism based on reactions of species from plasma at the IL surface to explain the formation of Bi-compounds by reactive sputtering.

Enhancing the Thermostability of Engineered Laccases in Aqueous Betaine-Based Natural Deep Eutectic Solvents.

In recent years, natural deep eutectic solvents (NADESs) have gained increasing attention as promising nontoxic solvents for biotechnological applications, due to their compatibility with enzymes and ability to enhance their activity. Betaine-based NADESs at a concentration of 25 wt % in a buffered aqueous solution were used as media to inhibit thermal inactivation of POXA1b laccase and its five variants when incubated at 70 and 90 °C. All the tested laccases showed higher residual activity when incubated in NADES solutions, with a further enhancement achieved also for the most thermostable variant. Furthermore, the residual activity of laccases in the presence of NADESs showed a clear advantage over the use of NADESs' individual components. Molecular docking simulations were performed to understand the role of NADESs in the stabilization of laccases toward thermal inactivation, evaluating the interaction between each enzyme and NADESs' individual components. A correlation within the binding energies between laccases and NADES components and the stabilization of the enzymes was demonstrated. These findings establish the possibility of preincubating enzymes in NADESs as a facile and cost-effective solution to inhibit thermal inactivation of enzymes when exposed to high temperatures. This computer-aided approach can assist the tailoring of NADES composition for every enzyme of interest.

UV-ozone cleaning of supported poly(vinylpyrrolidone)-stabilized palladium nanocubes: effect of stabilizer removal on morphology and catalytic behavior.

Poly(vinylpyrrolidone) (PVP)-stabilized Pd nanocubes were synthesized, deposited on a carbon-based support, and subsequently treated with UV-ozone (UVO) in order to eliminate the traces of PVP still present on the surface. Cubes, being a thermodynamically unfavorable shape, are very prone to restructuring to minimize the interfacial free energy and thus allow the assessment of their morphological stability during UVO cleaning. The process of PVP removal was monitored by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and in situ attenuated total reflection infrared spectroscopy (ATR-IR). High-resolution scanning electron microscopy (SEM) imaging was used to evaluate the morphology of the nanocubes. The effect of PVP removal was also studied in the hydrogenation of acetylene, showing a 4-fold increase of activity. This method can be applied to nanoparticles of other common shapes, which expose different crystal planes, in order to study the structure sensitivity of chemical reactions.

Exploring catalytic solid/liquid interfaces by in situ attenuated total reflection infrared spectroscopy.

In situ attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy has gained considerable attention as a powerful tool for exploring processes occurring at solid/liquid and solid/liquid/gas interfaces as encountered in heterogeneous catalysis and electrochemistry. Understanding of the molecular interactions occurring at the surface of a catalyst is not only of fundamental interest but constitutes the basis for a rational design of heterogeneous catalytic systems. Infrared spectroscopy has the exceptional advantage to provide information about structure and environment of molecules. In the last decade, in situ ATR-FT-IR has been developed rapidly and successfully applied for unraveling processes occurring at solid/liquid interfaces. Additionally, the kinetics of complex reactions can be followed by quantifying the concentration of products and reactants simultaneously in a non-destructive way. In this tutorial review we discuss some key aspects which have to be taken into account for successful application of in situ ATR-FT-IR to examine solid/liquid catalytic interfaces, including different experimental aspects concerned with the internal reflection element, catalyst deposition, cell design, and advanced experimental methods and spectrum analysis. Some of these aspects are illustrated using recent examples from our research. Finally, the potential and some limitations of ATR will be elucidated.

Improving laccase thermostability with aqueous natural deep eutectic solvents.

The wide-spread use of laccases in industry is often limited due to the enzyme inactivation over time at conditions which exceeds the operating conditions of the enzymes, which are neutral pH and ambient temperatures (30-40 °C). Natural Deep Eutectic Solvents (NADESs) have attracted considerable attention as reaction media in biocatalysis due to their promising compatibility with enzymes and sustainable derivation. In this contribution we demonstrate the possibility of applying aqueous NADESs as incubation media to alter the activity and inhibit thermal inactivation of laccase T. versicolor. For example we show that by incubating 0.25 g L-1 laccase in an aqueous 25 wt% betaine-xylitol based NADES at 70 °C for 15 min, the measured residual activity of laccase is a near 10 fold greater than the measured residual activity of laccase when incubated without the NADES. Moreover, the comparison of the residual activities of the enzyme in presence betaine, xylitol or NADES is clearly showing the advantage of using a NADES over its individual components. The drastic enhancement of the enzyme thermostability by pre-incubation of laccase in NADES media showcases a facile, cheap and green method of boosting the stability laccase.

Corrigendum: Dispersion and Stabilization of Exfoliated Graphene in Ionic Liquids.

[This corrects the article DOI: 10.3389/fchem.2019.00223.].

Supercritical CO2/ionic liquid systems: what can we extract from infrared and Raman spectra?

Infrared (IR) spectroscopy has been successfully applied to study the solubility of supercritical (sc) CO2 in an ionic liquid (IL), the swelling of the IL under scCO2, the diffusion of CO2 in the IL, and the molecular interaction between the IL and scCO2 using a single defined experimental setup. The study has been performed using 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF6] and scCO2 with a pressure of up to 150 bar at 313 K. The solubility of scCO2 in the IL was calculated via the intensity of the CO2 antisymmetric stretching mode, which was measured using the attenuated total reflection (ATR) method. This approach allowed to determine also the swelling of the IL under scCO2 using several IL bands. The knowledge gained about the solubility and swelling allowed the calculation of the molar fraction of CO2 in the IL and the attainment of similar data as previously determined by other methods. The kinetic measurement of the infrared spectra also offered the opportunity to observe the evolution of the concentration of CO2 in the IL and allowed an estimation of the diffusion coefficient of CO2 in IL under high pressure. Finally, information about the molecular interactions between the IL and scCO2 could also be gained in situ using both infrared and Raman spectroscopy.

In situ permeation study of drug through the stratum corneum using attenuated total reflectance [corrected] Fourier transform infrared spectroscopic imaging.

Infrared (IR) spectroscopy is one of the most chemically specific analytical methods that gives information about composition, structure, and interactions in a material. IR spectroscopy has been successfully applied to study the permeation of xenobiotics through the skin. Combining IR spectroscopy with an IR array detector led to the development of Fourier transform infrared (FTIR) spectroscopic imaging, which generates chemical information from different areas of a sample at the microscopic level. This is particularly important for heterogeneous samples, such as skin. Attenuated total reflectance [corrected] (ATR)-FTIR imaging has been applied to measure, in situ, the diffusion of benzyl nicotinate (BN) through the outer layer of human skin [stratum corneum (SC)]. In vitro experiments have demonstrated the heterogeneous distribution of SC surface lipids before the penetration of a saturated solution of BN. Image analysis demonstrated a strong correlation between the distribution of lipids and drugs, while ethanol appeared to be homogenously distributed in the SC. These results show the ability of ATR-FTIR imaging to measure simultaneously the affinities of drug and solvent to the lipid-rich and lipid-poor skin domains, respectively, during permeation. This information may be useful in better understanding drug-diffusion pathways through the SC.

High-throughput spectroscopic imaging applied to permeation through the skin.

Infrared (IR) spectroscopy has been successfully applied to study the permeation of substances through human skin in a high-throughput manner. The sample of skin was placed on the measuring surface of an attenuated total reflection (ATR) crystal and was divided into several areas. These areas were separated using a specially designed grid created on the surface of the skin and each area was subjected to a different combination of permeant and enhancer. ATR Fourier transform infrared (FT-IR) imaging was applied to measure the permeation of 12 liquid samples through a piece of skin smaller than 5 cm(2). This work demonstrated that, using the ATR-FT-IR imaging method, it is possible to measure and directly compare the transdermal processes of several permeants under identical conditions.

Dispersion and Stabilization of Exfoliated Graphene in Ionic Liquids.

The liquid-phase exfoliation of graphite is one of the most promising methods to increase production and commercial availability of graphene. Because ionic liquids can be easily obtained with chosen molecular structures and tuneable physicochemical properties, they can be use as media to optimize the exfoliation of graphite. The understanding of the interactions involved between graphite and various chemical functions in the solvent ions will be helpful to find liquids capable of dissociating and stabilizing important quantities of large graphene layers. After a step of sonication, as a mechanical precursor, samples of suspended exfoliated graphene in different ionic liquids have been characterized experimentally in terms of flake size, number of layers, total concentration and purity of the exfoliated material. Nine different ionic liquids based on imidazolium, pyrrolidinium and ammonium cations and on bis(trifluoromethylsulfonyl)imide, triflate, dicyanamide, tricyanomethanide, and methyl sulfate anions have been tested. UV-vis, Raman and X-ray photoelectron in addition to high resolution transmission electron and atomic force microscopy have been selected to characterize suspended exfoliated graphene in ionic liquids. The number of layers in the flakes exfoliated, the size and concentration depend of the structure of the ionic liquid selected. In order to obtain large flake sizes, ionic liquids with bis(trifluoromethylsulfonyl)imide anions and a cation with an alkyl chain of medium length should be selected. Smaller cation and anion favors the exfoliation of graphene. The exfoliation caused the formation of C-H bonds and the oxidation of the graphitic surface.

Improving Cellulose Dissolution in Ionic Liquids by Tuning the Size of the Ions: Impact of the Length of the Alkyl Chains in Tetraalkylammonium Carboxylate.

Twenty ionic liquids based on tetraalkylammonium cations and carboxylate anions have been synthesized, characterized, and tested for cellulose dissolution. The amount of cellulose dissolved in these ionic liquids depends strongly on the size of the ions: from 0 to 22 wt % cellulose can be dissolved at 90 °C. The best ionic liquids are less viscous and ammonium carboxylate based ionic liquids can dissolve as much as imidazolium-based ones. The viscosity of an ionic liquid can be decreased by the addition of DMSO as a cosolvent. After the addition of cosolvent, similar amounts of cellulose per ions are reached for most ionic liquids. As observed by rheology, ionic liquids with the longest alkyl chains form a gel when a high amount of cellulose is dissolved; this drastically limits their potential. Molecular simulations and IR spectroscopy have also been used with the aim of understanding how molecular interactions differ between efficient and inefficient ionic liquids.

Investigation of binary and ternary systems of ionic liquids with water and/or supercritical CO2 by in situ attenuated total reflection infrared spectroscopy.

Two commonly used ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]), as well as binary and ternary mixtures of them with water and/or supercritical CO(2) (scCO(2)) were investigated by means of infrared spectroscopy at high pressure. The experiments were performed using attenuated total reflection (ATR) infrared spectroscopy on dry and wet ILs at 40 degrees C and pressures up to 150 bar of scCO(2). The studies indicate that the content of water does not change significantly the solubility of CO(2) in the ionic liquids tested. Furthermore, the presence of water does not change significantly the interaction between the IL anion and CO(2), which explains why the presence of water in IL does not modify the solubility of CO(2) in the system, even in the case of an initial molar ratio of approximately 50/50 of water in [bmim][BF(4)]. We show that despite the limited solubility of water in supercritical CO(2) an ionic liquid can be efficiently dried using scCO(2) extraction even in the case of a hydrophilic ionic liquid (e.g., [bmim][BF(4)]). During the scCO(2) extraction, the concentration of water was followed in situ using attenuated total reflection (ATR) infrared spectroscopy. After extraction, no residual water could be detected by this technique, which corresponds approximately to a water concentration of below 320 ppm.

Simple in situ monitoring of a complex catalytic reaction network at high pressure by attenuated total reflection Fourier transform infrared spectroscopy.

Attenuated total reflection (ATR) Fourier transform infrared (FT-IR) in situ measurements were performed during the catalytic hydrogenation of acetophenone under high pressure (5.0 MPa). The catalyst used was a suspension of rhodium nanoparticles in an ionic liquid. At the highest temperature used (80 degrees C), the selectivity of the hydrogenation to 1-phenylethanol dropped from 80% in the beginning of the reaction, when acetylcyclohexane was the main side product, to less than 50% after a few hours of experiment because of the consecutive hydrogenation of 1-phenylethanol to ethylcyclohexane. The evolution of the concentrations of reactant and products was quantified using flawless spectra of pure components with a classical least squares (CLS) multivariate method applied to several ranges of the mid-infrared spectra. The only variable parameters of the analysis are the concentrations of each component themselves and the baseline shift of the spectrum during the reaction. The advantage of using multivariate analysis over the analysis of a single vibrational band, as well as the limitations of this type of spectral analysis, are discussed.

Tracing the acetalization of cyclohexanone in CO2-expanded alcohols by attenuated total reflection infrared spectroscopy.

The CO(2)-catalyzed acetalization is regarded as a promising alternative to the conventional acid-catalyzed method from a viewpoint of green chemistry (C. A. Eckert et al., Ind. Eng. Chem. Res. 43, 2605 (2004)). We have applied in situ attenuated total reflection infrared (ATR-IR) spectroscopy for elucidating and monitoring the acetalization of cyclohexanone in CO(2)-expanded ethylene glycol and methanol at 50 degrees C and 3 MPa. The ATR-IR spectra of the reaction mixtures periodically recorded with a ZnSe crystal demonstrate that ATR-IR spectroscopy is a practical tool for tracing the kinetics of acetalizations in situ. In addition, the rate of CO(2) dissolution as well as CO(2) solubility into the cyclohexanone-alcohol mixtures could be evaluated from the CO(2)-nu(3)-antisymmetric stretching band. The ZnSe ATR crystal, however, was corroded during longer use under the acidic conditions realized by the dissolution of CO(2) in the alcohols. In contrast, the corrosion did not occur when a Ge crystal was used instead of a ZnSe crystal, and therefore the application of a Ge ATR crystal is recommended for continuous long-term experiments with these media.