A nanoliter-scale nucleic acid processor with parallel architecture.

The purification of nucleic acids from microbial and mammalian cells is a crucial step in many biological and medical applications. We have developed microfluidic chips for automated nucleic acid purification from small numbers of bacterial or mammalian cells. All processes, such as cell isolation, cell lysis, DNA or mRNA purification, and recovery, were carried out on a single microfluidic chip in nanoliter volumes without any pre- or postsample treatment. Measurable amounts of mRNA were extracted in an automated fashion from as little as a single mammalian cell and recovered from the chip. These microfluidic chips are capable of processing different samples in parallel, thereby illustrating how highly parallel microfluidic architectures can be constructed to perform integrated batch-processing functionalities for biological and medical applications.

High-throughput multi-antigen microfluidic fluorescence immunoassays.

Here we describe the development of a high-throughput multi-antigen microfluidic fluorescence immunoassay system. A 100-chamber polydimethylsiloxane (PDMS) chip performs up to 5 tests for each of 10 samples. In this particular study system, the specificity of detection was demonstrated, and calibration curves were produced for C-reactive protein (CRP), prostate-specific antigen (PSA), ferritin, and vascular endothelial growth factor (VEGF). The measurements show sensitivity at and below clinically normal levels (with a signal-to-noise ratio >8 at as low as 10 pM antigen concentration). The chip uses 100 nL per sample for all tests. The developed system is an important step toward derivative immunoassay applications in scientific research and "point-of-care" testing in medicine.

The analytical approach to polydimethylsiloxane microfluidic technology and its biological applications.

This review article discusses PDMS (polydimethylsiloxane) microfluidic devices and their biological applications. First, the already developed devices are classified from the viewpoints of underlying technology within a common logical framework comprising single-layer, multilayer, and integrated devices, as well as surface chemistry modifications of PDMS. Combinatorial techniques are applied to re-derive existing devices within this framework. Next, the relevant scales of both microfluidics and biology are compared, obtaining the promise and limitations of PDMS microfluidics. Finally, the body of work is reclassified in terms of addressed biological applications and compared to the standard methods in cellular and molecular biology, to offer insights for future devices and applications.

Soluble factor(s) from bone marrow cells can rescue lethally irradiated mice by protecting endogenous hematopoietic stem cells.

OBJECTIVE: Ionizing radiation-induced myeloablation can be rescued via bone marrow transplantation (BMT) or administration of cytokines if given within 2 hours after radiation exposure. There is no evidence for the existence of soluble factors that can rescue an animal after a lethal dose of radiation when administered several hours postradiation. We established a system that could test the possibility for the existence of soluble factors that could be used more than 2 hours postirradiation to rescue animals. MATERIALS AND METHODS: Animals with an implanted TheraCyte immunoisolation device (TID) received lethal-dose radiation and then normal bone marrow Lin- cells were loaded into the device (thereby preventing direct interaction between donor and recipient cells). Animal survival was evaluated and stem cell activity was tested with secondary bone marrow transplantation and flow cytometry analysis. Donor cell gene expression of five antiapoptotic cytokines was examined. RESULTS: Bone marrow Lin- cells rescued lethally irradiated animals via soluble factor(s). Bone marrow cells from the rescued animals can rescue and repopulate secondary lethally irradiated animals. Within the first 6 hours post-lethal-dose radiation, there is no significant change of gene expression of the known radioprotective factors TPO, SCF, IL-3, Flt-3 ligand, and SDF-1. CONCLUSION: Hematopoietic stem cells can be protected in lethally irradiated animals by soluble factors produced by bone marrow Lin- cells.

Modeling gunshot bruises in soft body armor with an adaptive fuzzy system.

Gunshots produce bruise patterns on persons who wear soft body armor when shot even though the armor stops the bullets. An adaptive fuzzy system modeled these bruise patterns based on the depth and width of the deformed armor given a projectile's mass and momentum. The fuzzy system used rules with sinc-shaped if-part fuzzy sets and was robust against random rule pruning: Median and mean test errors remained low even after removing up to one fifth of the rules. Handguns shot different caliber bullets at armor that had a 10%-ordnance gelatin backing. The gelatin blocks were tissue simulants. The gunshot data tuned the additive fuzzy function approximator. The fuzzy system's conditional variance V[Y/X = x] described the second-order uncertainty of the function approximation. Handguns with different barrel lengths shot bullets over a fixed distance at armor-clad gelatin blocks that we made with Type 250 A Ordnance Gelatin. The bullet-armor experiments found that a bullet's weight and momentum correlated with the depth of its impact on armor-clad gelatin (R2 = 0.881 and p-value < 0.001 for the null hypothesis that the regression line had zero slope). Related experiments on plumber's putty showed that highspeed baseball impacts compared well to bullet-armor impacts for large-caliber handguns. A baseball's momentum correlated with its impact depth in putty (R2 = 0.93 and p-value < 0.001). A bullet's momentum similarly correlated with its armor-impact in putty (R2 = 0.97 and p-value < 0.001). A Gujarati-Chow test showed that the two putty-impact regression lines had statistically indistinguishable slopes for p-value = 0.396. Baseball impact depths were comparable to bullet-armor impact depths: Getting shot with a .22 caliber bullet when wearing soft body armor resembles getting hit in the chest with a 40-mph baseball. Getting shot with a .45 caliber bullet resembles getting hit with a 90-mph baseball.

Transduction of long-term-engrafting human hematopoietic stem cells by retroviral vectors.

Gene therapy using retroviral vectors to transfer functional exogenous genes into hematopoietic stem cells (HSCs) promises to provide a permanent cure for a wide array of both hematopoietic and nonhematopoietic disorders by virtue of the fact that retroviral vectors permanently integrate into the host cell genome and HSCs are able to self-renew and give rise to differentiated progeny throughout the life span of the patient. However, for transduction and genomic integration to occur, the target cells must undergo cell division and express the appropriate retroviral receptor, requirements that have thus far hindered attempts at inserting exogenous genes into human HSCs in vitro. In the present studies, we used the fetal sheep xenograft model of human hematopoiesis to evaluate whether human long-term engrafting HSCs could be transduced in vivo, within a fetal microenvironment. We transplanted adult human bone marrow-derived CD34(+)Lin(-) cells into preimmune fetal sheep recipients and subsequently (19 days later) administered clinical-grade murine retroviral vector supernatants to these fetal hematopoietic chimeras. Our results demonstrate that this approach successfully transduced adult human HSCs within all seven sheep that survived the procedure, and that these transduced HSCs had the ability to serially engraft primary, secondary, and tertiary fetal sheep recipients. Transgene expression persisted throughout the serial transplantation. The successful in vivo transduction of long-term engrafting human HSCs with the existing generation of murine retroviral vectors has significant implications for developing new approaches to pre- and postnatal gene therapy.

Antibody-mediated targeting of replication-competent retroviral vectors.

Replication-competent murine leukemia virus (MLV) vectors can be engineered to achieve high efficiency gene transfer to solid tumors in vivo and tumor-restricted replication, however their safety can be further enhanced by redirecting tropism of the virus envelope. We have therefore tested the targeting capability and replicative stability of ecotropic and amphotropic replication-competent retrovirus (RCR) vectors containing two tandem repeats from the immunoglobulin G-binding domain of Staphylococcal protein A inserted into the proline-rich "hinge" region of the envelope, which enables modular use of antibodies of various specificities for vector targeting. The modified envelopes were efficiently expressed and incorporated into virions, were capable of capturing monoclonal anti-HER2 antibodies, and mediated efficient binding of the virus-antibody complex to HER2-positive target cells. While infectivity was markedly reduced by pseudotyping with targeted envelopes alone, coexpression of wild-type envelope rescued efficient cellular entry. Both ecotropic and amphotropic RCR vector/anti-HER2 antibody complexes achieved significant enhancement of transduction on murine target cells overexpressing HER2, which could be competed by preincubation with excess free antibodies. Interestingly, HER2-expressing human breast cancer cells did not show enhancement of transduction despite efficient antibody-mediated cell surface binding, suggesting that target cell-specific parameters markedly affect the efficiency of post-binding entry processes. Serial replication of targeted vectors resulted in selection of Z domain deletion variants, but reduction of the overall size of the vector genome enhanced its stability. Application of antibody-mediated targeting to the initial localization of replication-competent virus vectors to tumor sites will thus require optimized target selection and vector design.

Retroviral gene therapy vectors for prevention of excimer laser-induced corneal haze.

PURPOSE: To determine the in vivo efficacy and safety of a retroviral vector bearing an antiproliferative dominant negative mutant cyclin G1 (dnG1) construct, when used for the prevention of corneal haze after phototherapeutic keratectomy (PTK). METHODS: For in vivo efficacy studies, a 6-mm-diameter, 150-microm-deep transepithelial PTK, performed with a clinical 193-nm ArF excimer laser (VISX Star2, Santa Clara, CA) was performed on the left eyes of 20 adult New Zealand White rabbits. The surgically altered eyes were subsequently treated with eye drops containing: a retroviral vector bearing a dnG1 construct (dnG1; n = 7), a control retroviral vector (null vector) bearing only the neomycin resistance, neo(r), gene (n = 7), or a retroviral vector bearing an antisense cyclin G1 (aG1) construct (n = 6). The time of closure of the corneal epithelial defect was monitored daily with fluorescein staining. Corneal haze was evaluated before surgery and at 2, 3, and 4 weeks after surgery, with a digital imaging system. Biodistribution studies for detection of potential vector dissemination to nontarget organs were conducted by PCR-based assay. RESULTS: The re-epithelialization rate was similar among treatment groups, with complete closure of the corneal epithelial defect at 72 hours (P > 0.05). Significant corneal haze developed in the null and aG1 vector-treated groups (P

Mass spectrometry of murine leukemia virus core proteins.

A mass spectrometry (MS) approach was used to analyze viral core proteins of the murine leukemia virus (MuLV)-based gene delivery vector. The retroviral particles produced by traditional methods were concentrated and purified by ultracentrifugation and spin column for matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) MS. MALDI application detected all core MuLV proteins, partial degradation of p10, phosphorylation of p12, as well as the previously unknown formation of a polymeric supramolecular complex between p15 and p30 core proteins. ESI provided information on the post-translational modifications of MuLV core proteins. Data suggest myristoylation of p15 and oxidation of methionine residues in both p12 and p30, whereas cysteine residues in p10, p15 and p30 were not oxidized. The current study demonstrates that MALDI and ESI are efficient tools for viral core protein analysis and can be used as analytical tools in virology and biotechnology of gene delivery vectors.

Membrane-proximal cytoplasmic domain of Moloney murine leukemia virus envelope tail facilitates fusion.

Removal of the R peptide (residues 617-632) from the Moloney murine leukemia virus (MoMuLV) envelope protein (Env) cytoplasmic tail potentiates fusion. We examined the role of the membrane-proximal cytoplasmic domain (598-616) of the MoMuLV Env in the Env-mediated membrane fusion and incorporation. The Env truncated at 616 exhibits maximum fusogenicity in cell-to-cell fusion assay. By comparison, full tail Env (632) and the Env truncated to residue 601 mediated fusion at 40%. The Envs truncated to residues 598 or 595 are not fusogenic. Progressive cytoplasmic tail truncation correlated with decreased Env incorporation into virions. Substitution of the domain 598-616 with an amphiphilic alpha-helix from melittin results in maximally fusogenic Envs that efficiently incorporated into transduction competent virions. However, substitution of the domain 598-616 with random or hydrophilic sequences caused loss of the Env fusogenicity and titer while retaining incorporation. Further, a secondary structure prediction analysis of 27 unrelated Env cytoplasmic tails indicates a common (23/27) propensity for an amphiphilic alpha-helical domain at immediate proximity to the viral membrane. These results support the suggestion that viral fusion is enhanced by a membrane-proximal cytoplasmic amphiphilic alpha-helix in Env tail. The model of its action is proposed.

Membrane activity of an amphiphilic alpha-helical membrane-proximal cytoplasmic domain of the MoMuLV envelope glycoprotein.

In the Moloney murine leukemia virus (MoMuLV) envelope glycoprotein (Env) we identified a membrane-proximal cytoplasmic domain (residues 598-616) that facilitates the Env incorporation into virions and Env-mediated fusion [Rozenberg, Y., Conner, J., Aguilar-Carreno, H., Chakraborti, S., Dimiter, D.S., Anderson, W.F., 2008. Viral entry: membrane-proximal cytoplasmic domain of MoMuLV envelope tail facilitates fusion. In the same issue. (accompanying paper)]. By biophysical methods (CD, EPR) a corresponding peptide (membrane-proximal peptide, 598-616) was demonstrated to form a membrane-parallel amphiphilic alpha-helix in the presence of membranes. Electrophysiological studies with planar bilayers and liposomes indicate that the membrane-proximal peptide is membrane destabilizing. This peptide and the fusion peptide from the MoMuLV transmembrane (TM) ectodomain were tested for their effect on the bilayer for hexagonal phase transition temperature of dipalmitoleoylphosphatidylethanolamine (T(H)). Importantly, the external fusion peptide and the internal membrane-proximal peptides of MoMuLV env exert opposite effects on membrane curvature. The fusion peptide lowers T(H) while the membrane proximal peptide raises it. These effects on T(H) correlate with the ability of these peptides to induce lipid mixing in large unilamellar vesicles composed of dioleoylphosphatidylethanolamine: dioleoylphosphatidylcholine:cholesterol (1:1:1 mol). When added externally to preformed liposomes, the N-terminal fusion peptide promotes lipid mixing while the cytoplasmic membrane-proximal peptide inhibits this effect. These finding indicate a possible mechanism by which the membrane-proximal domain in MoMuLV Env may affect the formation of membrane fusion intermediates.

Downregulation of NPM-ALK by siRNA causes anaplastic large cell lymphoma cell growth inhibition and augments the anti cancer effects of chemotherapy in vitro.

The fusion protein, nucleophosmin-anaplastic lymphoma kinase (NPM-ALK), results from the chromosome translocation t(2;5)(p23;q25) and is present in 50-70 percent of anaplastic large-cell lymphomas (ALCLs). NPM-ALK is a constitutively activated kinase that transforms cells through stimulating several mitogenic signaling pathways. To examine if the NPM-ALK is a potential therapeutic target in ALCL, we used siRNA to specifically downregulate the expression of the NPM-ALK in ALCL cell lines. In this report, we demonstrated viability loss in t(2;5)-positive ALCL cell lines, SUDHL-1 and Karpas 299 cells, but not in lymphoma cell lines without the chromosome translocation, Jurkat and Granta 519 cells. Further study demonstrated that the downregulation of NPM-ALK resulted in decreased cell proliferation and increased cell apoptosis. When used in combination with chemotherapeutic agents, such as doxorubicin, the inhibition of the NPM-ALK augments the chemosensitivity of the tumor cells. These results revealed the importance of continuous expression of NPM-ALK in maintaining the growth of ALCL cells. Our data also suggested that the repression of the fusion gene might be a potential novel therapeutic strategy for NPM-ALK positive ALCLs.

Experimentally validated quantitative linear model for the device physics of elastomeric microfluidic valves.

A systematic experimental study and theoretical modeling of the device physics of polydimethylsiloxane "pushdown" microfluidic valves are presented. The phase space is charted by 1587 dimension combinations and encompasses 45-295 µm lateral dimensions, 16-39 µm membrane thickness, and 1-28 psi closing pressure. Three linear models are developed and tested against the empirical data, and then combined into a fourth-power-polynomial superposition. The experimentally validated final model offers a useful quantitative prediction for a valve's properties as a function of its dimensions. Typical valves (80-150 µm width) are shown to behave like thin springs.

Electrical microfluidic pressure gauge for elastomer microelectromechanical systems.

We report on an electrical microfluidic pressure gauge. A polydimethylsiloxane microvalve closes at a characteristic applied pressure determined by the material's properties and the valve's dimensions. Hence, when the same pressure is applied to all valves of a heterogeneous valve array, some valves close while others remain open. The state of the array is combined with knowledge of the respective characteristic closing pressures of the individual valves to yield an estimate of the applied pressure. The state of each valve is obtained by electrical measurements, since the electrical resistance of the respective underlying fluid-filled channel increases by at least two orders of magnitude as the valve closes and its insulating elastomer material interrupts the electrical circuit. The overall system functions as a pressure gauge with electrical readout. This device would be a critical component in active pressure-regulation loops in future integrated microfluidic systems.

Microfluidic single-cell mRNA isolation and analysis.

Single-cell gene expression analysis holds great promise for studying diverse biological systems, but methodology to process these precious samples in a reproducible, quantitative, and parallel fashion remains challenging. Here, we utilize microfluidics to isolate picogram and subpicogram mRNA templates, as well as to synthesize cDNA from these templates. We demonstrate single-cell mRNA isolation and cDNA synthesis, provide quantitative calibrations for each step in the process, and measure gene expression in individual cells. The techniques presented here form the foundation for highly parallel single-cell gene expression studies.