Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nano Lett ; 23(10): 4344-4350, 2023 May 24.
Artigo em Inglês | MEDLINE | ID: mdl-37167540

RESUMO

One of the challenges of nanoelectromechanical systems (NEMS) is the effective transduction of the tiny resonators. Vertical structures, such as nanomechanical pillar resonators, which are exploited in optomechanics, acoustic metamaterials, and nanomechanical sensing, are particularly challenging to transduce. Existing electromechanical transduction methods are ill-suited as they put constraints on the pillars' material and do not enable a transduction of freestanding pillars. Here, we present an electromechanical transduction method for single nanomechanical pillar resonators based on surface acoustic waves (SAWs). We demonstrate the transduction of freestanding nanomechanical platinum-carbon pillars in the first-order bending and compression mode. Since the principle of the transduction method is based on resonant scattering of a SAW by a nanomechanical resonator, our transduction method is independent of the pillar's material and not limited to pillar-shaped geometries. It represents a general method to transduce vertical mechanical resonators with nanoscale lateral dimensions.

2.
Sensors (Basel) ; 23(13)2023 Jun 21.
Artigo em Inglês | MEDLINE | ID: mdl-37447656

RESUMO

Reliable time of arrival (ToA) estimation in dense multipath (DM) environments is a difficult task, especially when strong interference is present. The increasing number of multiple services in a shared spectrum comes with the demand for interference mitigation techniques. Multiple receiver elements, even in low-energy devices, allow for interference mitigation by processing coherent signals, but computational complexity has to be kept at a minimum. We propose a low-complexity, linearly constrained minimum variance (LCMV) interference mitigation approach in combination with a detection-based ToA estimator. The performance of the method within a realistic multipath and interference environment is evaluated based on measurements and simulations. A statistical analysis of the ToA estimation error is provided in terms of the mean absolute error (MAE), and the results are compared to those of a band-stop filter-based interference blocking approach. While the focus is on receivers with only two elements, an extension to multiple elements is discussed as well. Results show that the influence of strong interference can be drastically reduced, even when the interference bandwidth exceeds 60% of the signal bandwidth. Moreover, the algorithm is robust to uncertainties in the angle of arrival (AoA) of the desired signal. Based on these results, the proposed mitigation method is well suited when the interference bandwidth is large and when computational power is a critical resource.


Assuntos
Algoritmos , Projetos de Pesquisa , Incerteza
3.
Sensors (Basel) ; 23(17)2023 Aug 22.
Artigo em Inglês | MEDLINE | ID: mdl-37687789

RESUMO

In the past decade, Long-Range Wire-Area Network (LoRaWAN) has emerged as one of the most widely adopted Low Power Wide Area Network (LPWAN) standards. Significant efforts have been devoted to optimizing the operation of this network. However, research in this domain heavily relies on simulations and demands high-quality real-world traffic data. To address this need, we monitored and analyzed LoRaWAN traffic in four European cities, making the obtained data and post-processing scripts publicly available. For monitoring purposes, we developed an open-source sniffer capable of capturing all LoRaWAN communication within the EU868 band. Our analysis discovered significant issues in current LoRaWAN deployments, including violations of fundamental security principles, such as the use of default and exposed encryption keys, potential breaches of spectrum regulations including duty cycle violations, SyncWord issues, and misaligned Class-B beacons. This misalignment can render Class-B unusable, as the beacons cannot be validated. Furthermore, we enhanced Wireshark's LoRaWAN protocol dissector to accurately decode recorded traffic. Additionally, we proposed the passive reception of Class-B beacons as an alternative timebase source for devices operating within LoRaWAN coverage under the assumption that the issue of misaligned beacons can be addressed or mitigated in the future. The identified issues and the published dataset can serve as valuable resources for researchers simulating real-world traffic and for the LoRaWAN Alliance to enhance the standard to facilitate more reliable Class-B communication.

4.
Sensors (Basel) ; 23(12)2023 Jun 20.
Artigo em Inglês | MEDLINE | ID: mdl-37420936

RESUMO

The accuracy of radio-based positioning is heavily influenced by a dense multipath (DM) channel, leading to poor position accuracy. The DM affects both time of flight (ToF) measurements extracted from wideband (WB) signals-specifically, if the bandwidth is below 100 MHz-as well as received signal strength (RSS) measurements, due to the interference of multipath signal components onto the information-bearing line-of-sight (LoS) component. This work proposes an approach for combining these two different measurement technologies, leading to a robust position estimation in the presence of DM. We assume that a large ensemble of densely-spaced devices is to be positioned. We use RSS measurements to determine "clusters" of devices in the vicinity of each other. Joint processing of the WB measurements from all devices in a cluster efficiently suppresses the influence of the DM. We formulate an algorithmic approach for the information fusion of the two technologies and derive the corresponding Cramér-Rao lower bound (CRLB) to gain insight into the performance trade-offs at hand. We evaluate our results by simulations and validate the approach with real-world measurement data. The results show that the clustering approach can halve the root-mean-square error (RMSE) from about 2 m to below 1 m, using WB signal transmissions in the 2.4 GHz ISM band at a bandwidth of about 80 MHz.


Assuntos
Tecnologia , Extremidade Superior , Análise por Conglomerados
5.
Sensors (Basel) ; 22(7)2022 Mar 30.
Artigo em Inglês | MEDLINE | ID: mdl-35408277

RESUMO

The localization of internet of things (IoT) nodes in indoor scenarios with strong multipath channel components is challenging. All methods using radio signals, such as received signal strength (RSS) or angle of arrival (AoA), are inherently prone to multipath fading. Especially for time of flight (ToF) measurements, the low available transmit bandwidth of the used transceiver hardware is problematic. In our previous work on this topic we showed that wideband signal generation on narrowband low-power transceiver chips is feasible without any changes to existing hardware. Together with a fixed wideband receiving anchor infrastructure, this facilitates time difference of arrival (TDoA) and AoA measurements and allows for localization of the fully asynchronously transmitting nodes. In this paper, we present a measurement campaign using a receiver infrastructure based on software-defined radio (SDR) platforms. This proves the actual usability of the proposed method within the limitations of the bandwidth available in the ISM band at 2.4 GHz. We use the results to analyze the effects of possible anchor placement schemes and scenario geometries. We further demonstrate how this node-to-infrastructure-based localization scheme can be supported by additional node-to-node RSS measurements using a simple clustering approach. In the considered scenario, an overall positioning root-mean-square error (RMSE) of 2.19 m is achieved.

6.
Opt Express ; 23(3): 3117-25, 2015 Feb 09.
Artigo em Inglês | MEDLINE | ID: mdl-25836170

RESUMO

We demonstrate a broadband terahertz amplifier based on ultrafast gain switching in a quantum cascade laser. A heterogeneous active region is processed into a coupled cavity metal-metal waveguide device and provides broadband terahertz gain that allows achieving an amplification bandwidth of more than 500 GHz. The temporal and spectral evolution of a terahertz seed pulse, which is generated in an integrated emitter section, is presented and an amplification factor of 21 dB is reached. Furthermore, the quantum cascade amplifier emission spectrum of the emerging sub-nanosecond terahertz pulse train is measured by time-domain spectroscopy and reveals discrete modes between 2.14 and 2.68 THz.

7.
Opt Express ; 14(17): 7661-9, 2006 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-19529134

RESUMO

Ultrahigh axial resolution surface profiling as well as volumetric optical imaging based on time encoded optical coherence tomography in the frequency domain without any mechanical scanning element is presented. A frequency tuned broad bandwidth titanium sapphire laser is interfaced to an optical microscope (Axioskop 2 MAT, Carl Zeiss Meditec) that is enhanced with an interferometric imaging head. The system is equipped with a 640 x 480 pixel CMOS camera, optimized for the 800 nm wavelength tuning range for transmission and reflection measurements of a microscopic sample. Sample volume information over 1.3 x 1 x 0.2 mm(3) with ~3 mum axial and ~4 mum transverse resolution in tissue is acquired by a single wavelength scan over more than 100 nm optical bandwidth from <760 to >860 nm with 128-2048 equidistant optical frequency steps with an acquisition time of 1 to 50 ms per step. Topography and tomography with a signal to noise ratio of 83 dB is demonstrated on test surfaces and biological specimen respectively. This novel OCT technique promises to enable high speed, three dimensional imaging by employing high frame rate cameras and state of the art tunable lasers in a mechanically stable environment, due to lack of moving components while reducing the intensity on the sample.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA