In Vitro Evaluation of a Foamable Microemulsion Towards an Improved Topical Delivery of Diclofenac Sodium.

Topical microemulsion (ME) might provide a novel and advanced transdermal delivery system due to the enhances of drug solubility and permeability across the stratum corneum. Foams are topical delivery systems that have excellent patient compliance, acceptability, and preference. Therefore, this study aimed to investigate a foamable microemulsion as an alternative topical and transdermal dosage form for diclofenac sodium (DS). The physicochemical properties (optical clarity, percentage transmittance, homogeneity, consistency of formulation, particle size, zeta potential, conductivity, viscosity, and morphology, etc.) of the DS-loaded ME were investigated. The foam stability of both drug-free ME and DS-loaded ME was measured. The foam quality was evaluated, and the chemical stability over 90 days was determined. Franz diffusion cells were employed to assess the in vitro drug release of a foamed DS-loaded ME and compared with a commercial topical product. A foamable and stable DS-loaded ME that maintained small particle sizes and constant zeta potential and was transparent and translucent in appearance after 90 days was successfully produced. The foam of the DS-loaded ME was physically more stable compared to the drug-free foam. The foam had an increased drug release rate compared to the commercial product. The foamable DS-loaded ME has a great potential to enhance the transdermal delivery of DS after topical administration. Foamed DS-loaded ME is a promising alternative to the current topical formulation of DS.

Diazepam Loaded Solid Lipid Nanoparticles: In Vitro and In Vivo Evaluations.

Purpose: To overcome the side effects of repetitive administration of diazepam (Dzp) besidesgaining benefits from sustaining release of the drug, which contributes to patient compliance,we concentrated on designing and preparing Dzp solid lipid nanoparticles (SLNs). Methods: Using cholesterol (CHOL), stearic acid (SA), and glycerol monostearate (GMS), SLNswere prepared by high shear homogenization technique coupled with sonication. Polysorbate80 (Tween 80) was used as a nonionic surfactant. After modification of prepared SLNs, particlesize, zeta potential, drug-loading efficiency, morphology, and scanning calorimetry, as well asrelease studies were conducted. To increase the stability of desired particles, freeze-drying bycryoprotectant was carried out. In the final stage, In vivo studies were performed by oral (PO)and intraperitoneal (IP) administrations to Wistar male rats. Results: Results indicated that optimized prepared particles were on average 150 nm diameterin spherical shape with 79.06 % loading efficiency and release of more than 85% of the loadeddrug in 24 hours. In vivo investigations also illustrated differences in blood distribution of Dzpafter loading this drug into SLNs. Conclusion: Based on the findings, it seems that drug delivery using SLNs could be anopportunity for solving complications of Dzp therapy in the future.

Development and optimization of solid lipid nanoparticles of amikacin by central composite design.

Solid lipid nanoparticles (SLNs) have been studied as a drug-delivery system for the controlling of drug release. These colloidal systems have many important advantages, such as biocompatibility, good tolerability, and ease of scale-up. In the preparation of SLNs, many factors are involved in the characteristics of the particles, such as particle size, drug loading, and zeta potential. In this study, fractional factorial design was applied to examine which variables affect the physicochemical properties of amikacin SLNs. Study was continued by a statistical central composite design (CCD) to minimize particle size and maximize drug-loading efficiency of particles. The results showed that three quantitative factors, including the amount of lipid phase, ratio of drug to lipid, and volume of aqueous phase, were the most important variables on studied responses. The best predicted model for particle size was the quadratic model, and for drug-loading efficiency, was the linear model without any significant lack of fit. Optimum condition was achieved when the ratio of drug to lipid was set at 0.5, the amount of lipid phase at 314 mg, and the volume of aqueous phase at 229 mL. The optimized particle size was 149 +/- 4 nm and the drug-loading efficiency 88 +/- 5%. Polydispersity index was less than 0.3. The prepared particles had spherical shape, and the drug release from nanoparticles continued for 144 hours (6 days) without significant burst effect.

Thermal treating of acrylic matrices as a tool for controlling drug release.

The purpose of the present study was to investigate the effect of thermal-treating on the release of ibuprofen from the granules prepared using aqueous dispersions of Eudragit. To accomplish this goal, different formulations were prepared using wet granulation method containing two different types of Eudragit aqueous dispersions, RS30D, RL30D and Avicel as filler. Tablets were prepared using direct compression method. The prepared tablets were thermally treated at 50 and 70 degrees C for 24 h. The drug release from tablets was assessed before and after thermal-treating. The results of release study showed that, thermally-treating the tablets at the temperatures higher than glass transition temperature (Tg) of the polymer can decrease the drug release from matrices. For mechanistic evaluation of the effect of thermal-treating, powder X-ray diffraction (XPD), scanning electron microscopy (SEM), differential scanning calorimeter (DSC), Fourier transform infrared (FT-IR) and helium pycnometer have been employed. The SEM graphs showed that the tablets have smoother surface with less porosity after thermal-treating. FT-IR spectra showed no change in the spectrum of thermally-treated tablet compared to control. In DSC graphs, no crystalline change was seen in the heat-treated samples of ibuprofen tablets, but decreased and widened peak size were related to the probable formation of solid solution of ibuprofen in Eudragit matrix. The results of helium pycnometer showed a significant decrease in the total porosity of some heat-treated samples. This study revealed the importance of thermal treating on the drug release from sustained release tablets containing Eudragit polymer.

Targeted delivery of nanoparticles for the treatment of lung diseases.

Targeted delivery of drug molecules to organs or special sites is one of the most challenging research areas in pharmaceutical sciences. By developing colloidal delivery systems such as liposomes, micelles and nanoparticles a new frontier was opened for improving drug delivery. Nanoparticles with their special characteristics such as small particle size, large surface area and the capability of changing their surface properties have numerous advantages compared with other delivery systems. Targeted nanoparticle delivery to the lungs is an emerging area of interest. This article reviews research performed over the last decades on the application of nanoparticles administered via different routes of administration for treatment or diagnostic purposes. Nanotoxicological aspects of pulmonary delivery are also discussed.

Size dependent interactions of nanoparticles with lung surfactant model systems and the significant impact on surface potential.

The relationship between a model pulmonary surfactant system and various sized nanoparticles was investigated in this study. Diplamitoylphosphatidylcholine (DPPC) is the main lipid constituent of lung surfactant and has the ability to reach very high surface pressures (around 70 mN/m) upon compression. Due to these properties it was used as a model to simulate the lung surfactant film in vitro. The first objective of this study was to investigate the relationship between DPPC and various sized nanoparticles within the subphase through surface pressure-area isotherms. The second objective was to measure the surface potential of the different preparations (conducted on a mini-Langmuir trough) and to determine if an optimal nanoparticle size exists possessing a greater affinity for the DPPC film compared to other sizes. The results from the pressure area isotherms indicate that the interaction between DPPC and the nanoparticles is stable and that the 235 nm particles may represent an optimal size. Furthermore, the results from the surface potential experiments confirm that an interaction of the nanoparticles with the monolayer exists as indicated by surface-pressure area isotherms. Any even moderate interaction between nanoparticles and lung surfactant film might reduce or increase the surface potential of the surfactant film, and this might impact the deposition of the nanoparticles or other ligands which may be positively or negatively charged drugs within the surfactant film. Thus changes in surface potential due to nanoparticle interactions have to be taken into account for future drug targeting studies using nano-sized drug carriers.

Formulation and in vivo evaluation of effervescent inhalable carrier particles for pulmonary delivery of nanoparticles.

The purpose of this study was to evaluate the safety of a new inhalable effervescent carrier preparation containing model nanoparticles. Spray-freeze drying was used to prepare inhalable powders containing butylcyanoacrylate nanoparticles. The particle size of the nanoparticles before incorporation into the effervescent carrier and after dissolving the carrier powder was measured using laser light scattering. The particle size distribution of the effervescent carrier aerosol particles was measured using a cascade impactor. The prepared powder was tested in vivo using five Balb/c nude mice. The animals were treated with 1 mg of inhalable powder every week for 4 weeks. The body weight and morbidity score of the mice were observed over an 8-week period. The effervescent activity of the inhalable nanoparticle powder was observed when the powder was exposed to humidity. The particle size of the nanoparticles did not change significantly after spray-freeze drying. The mass median aerodynamic diameter (MMAD) of the prepared powder was 4.80 +/- 2.12 microm, which is suitable for lung delivery. The animals that were treated with effervescent powder tolerated the administration without any changes in their morbidity scores. Our pilot study demonstrates that pulmonary nanoparticle delivery via effervescent carrier particles appears safe in the present animal model.

Biodistribution of Tc-99m Labeled Isoniazid Solid Lipid Nanoparticles in Wistar Rats.

In this study Isoniazid (INH) as one of the first line drugs in treatment of Tuberculosis was investigated to be loaded in Solid Lipid Nanoparticles (SLNs) for reducing hepatotoxicity as well as prolonging drug release. High shear homogenization method was performed to prepare INH SLNs. To compare biodistribution of INH before and after loading in SLNs, INH was labeled by Technetium 99 (Tc99) after derivatization. The particle size of the prepared SLNs was 167 and 200 nm before and after lyophilization, respectively. Loading efficiency was calculated using the reverse method and release study was performed by using the dialysis sack method. Loading efficiency was 98%, and more than 85% of the loaded drug released in 3 h. Differential Scanning calorimeter (DSC) studies were performed for evaluating of the probability of happening hydrogen bonds or other chemical interactions between cholesterol as carrier and isoniazid as active pharmaceutical ingredient. The results could support the probability of hydrogen bond formation between cholesterol and INH. Gamma Scintigraphy studies showed that after administering INH SLNs, longer drug retention in the body was obtained compared to free INH. Quantitative gamma counting showed that the concentration of INH in the liver and intestines could be decreased by using nanotechnology.

Current perspectives in dissolution testing of conventional and novel dosage forms.

The purpose of this article is to review USP and non-pharmacopeial dissolution testing methods for conventional and novel pharmaceutical dosage forms and give an insight to possible alternatives in drug dissolution study design and appropriate choices for dissolution media. For each dosage form first the USP method(s) for dissolution testing are reviewed followed by alternative methods used in research and development.

Optimization of a two-step desolvation method for preparing gelatin nanoparticles and cell uptake studies in 143B osteosarcoma cancer cells.

PURPOSE: To establish a matrix of parameters to synthesize nanoparticles of different sizes and to investigate the cellular uptake of these nanoparticles by osteosarcoma cancer cells in order to investigate their potential as therapeutic drugdelivery carriers. METHODS: Gelatin A and B were used to synthesize nanoparticles by a two-step desolvation process. Different parameters were investigated, including temperature, pH, concentration of glutaraldehyde, type of desolvating agent and nature of gelatin. For cell uptake studies, Texas Red labeled nanoparticles were incubated with 143B osteosarcoma cells and then evaluated using confocal laser scanning microscopy (CLSM). RESULTS: The systematic investigation of the synthesis parameters showed that it is possible to prepare gelatin-based nanoparticles with different particle sizes and a narrow size distribution. Temperature and nature of the gelatin were the most important synthesis factors. Bioimaging using CLSM showed uptake of the nanoparticles by 143B osteosarcoma cancer cells. CONCLUSIONS: Osteosarcoma cancer cells take up gelatin nanoparticles. This might improve the clinical effectiveness of anti-cancer treatments if nanoparticles are used as a drug delivery system and has important implications for future cancer treatment strategies.

Formulation and cytotoxicity of doxorubicin nanoparticles carried by dry powder aerosol particles.

Regional drug delivery via dry powder inhalers offers many advantages in the management of pharmaceutical compounds for the prevention and treatment of respiratory diseases. In the present study, doxorubicin (DOX)-loaded nanoparticles were incorporated as colloidal drug delivery system into inhalable carrier particles using a spray-freeze-drying technique. The cytotoxic effects of free DOX, carrier particles containing blank nanoparticles or DOX-loaded nanoparticles on H460 and A549 lung cancer cells were assessed using a colorimetric XTT cell viability assay. The mean geometric carrier particle size of 10+/-4 microm was determined using confocal laser scanning microscopy. DOX-loaded nanoparticles had a particle size of 173+/-43 nm after re-dissolving of the carrier particles. Compared to H460 cells, A549 cells showed less sensitivity to the treatment with free DOX. The DOX-nanoparticles showed in both cell lines a higher cytotoxicity at the highest tested concentration compared to the blank nanoparticles and the free DOX. The cell uptake of free DOX and DOX delivered by nanoparticles was confirmed using confocal laser scanning microscopy. This study supports the approach of lung cancer treatment using nanoparticles in dry powder aerosol form.

Synergic Antibacterial Effect of Curcumin with Ampicillin; Free Drug Solutions in Comparison with SLN Dispersions.

Purpose: This study was designed to investigate benefit of using nanotechnology on increasing of synergic antibacterial effect of natural and chemical antibacterial agents. Methods: At first the MIC and MBC of Curcumin and Ampicillin as selected antibacterial agents was determined, after that Solid Lipid Nanoparticles (SLNs) of each active ingredients as well as Curcumin-Ampicillin loaded SLNs were prepared using high pressure homogenization technique. Characterization of prepared SLNs was done, then MIC, MBC and contact killing time were investigated for Curcumin-Ampicillin loaded SLNs in comparison with free Curcumin and Ampicillin solutions as well as Ampicillin and Curcumin SLNs. Results: Based on results nanoparticles with the size of 150 nm show much more decreased MIC and MBC when Ampicillin and Curcumin were loaded together on SLNs than solutions in which free Ampicillin and Curcumin were mixed. Conclusion: It seems that using nanotechnology could cause decrease the dosage of antibiotics and risk of having antibiotic resistance bacteria strains.

Mechanistic evaluation of the effect of thermal-treating on Eudragit RS matrices.

Thermal treatment of acrylic matrices was recently introduced as a tool for prolonging the release of drug. Thermal treatment at temperatures above the T(g) of the polymer can decrease drug release rate. In this research we studied the mechanism of the effect of thermal treatment on Eudragit RS matrices. Indomethacin was used as model drug. The results showed that polymer chain movement and redistribution of the polymer in the tablet matrix structure after thermal-treating is the possible mechanism of drug release prolongation. The melting and resolidification of the polymer, due to the thermal treatment has apparently resulted in a redistribution of the polymer throughout the matrix and a change in the porosity of the tablet. FTIR results did not show any drug-polymer interaction due to heat-treatment. DSC and PXD studies ruled out the occurrence of solid solution and polymorphic change of the drug.

Design and evaluation of 1- and 3-layer matrices of verapamil hydrochloride for sustaining its release.

The present study was performed to design oral controlled delivery systems for the water-soluble drug, verapamil hydrochloride, using natural and semisynthetic polymers as carriers in the forms of 1- and 3-layer matrix tablets. Verapamil hydrochloride 1-layer matrix tablets containing hydroxypropylmethylcellulose, tragacanth, and acacia either alone or mixed were prepared by direct compression technique. 3-layer matrix tablets were prepared by compressing the polymers as release retardant layers on both sides of the core containing the drug. The prepared tablets were subjected to in vitro drug release studies. Tragacanth when used as the carrier in the formulation of 1- and 3-layer matrices produced satisfactory release prolongation either alone or in combination with the other 2 polymers. On the other hand, acacia did not show enough prolonging efficiency in 1- and 3-layer matrix tablets. The results also showed that the location of the polymers in the 3-layer tablets has a pronounced effect on the drug release. Kinetic analysis of drug release from matrices exhibiting sustained release indicated that release was predominantly attributable to the contribution made by Fickian diffusion, while the erosion/relaxation mechanisms had a minor role in the release.

Distribution of effervescent inhalable nanoparticles after pulmonary delivery: an in vivo study.

BACKGROUND: Effervescent inhalable nanoparticles (NPs) have previously been shown to be a promising alternative to conventional lung cancer treatment in animals. This study investigates the biodistribution of effervescent inhalable NPs after a single dose administration via pulmonary route in lung cancer-bearing mice. METHODS & RESULTS: Whole-body autoradiography and confocal laser-scanning microscopy (CLSM) were used to investigate the distribution of inhalable NPs loaded in an effervescent microcarrier. Inhalable doxorubicin-loaded NPs were tagged with 14C for whole-body autoradiography, or with fluorescein isothiocyanate for CLSM imaging. After pulmonary delivery, NPs were widely disseminated in the lungs with a long retention time (24 h). The heart was radioactivity free at all time points of the study. CLSM images showed that inhalable NPs were taken up by cells and that doxorubicin was released to the cell nuclei. CONCLUSION: This is the first study to investigate the distribution of inhalable NPs in a lung cancer-bearing animal model. Inhalable NPs achieved deep lung deposition, were actively released from microcarrier particles, spread to different parts of the lung and released doxorubicin in vivo. These NP characteristics contribute to the efficacy of effervescent inhalable NPs as a lung cancer treatment.

Microcalorimetric method to assess phagocytosis: macrophage-nanoparticle interactions.

This study evaluated the use of isothermal microcalorimetry (ITMC) to detect macrophage-nanoparticle interactions. Four different nanoparticle (NP) formulations were prepared: uncoated poly(isobutyl cyanoacrylate) (PIBCA), polysorbate-80-coated PIBCA, gelatin, and mannosylated gelatin NPs. Changes in NP formulations were aimed to either enhance or decrease macrophage-NP interactions via phagocytosis. Alveolar macrophages were cultured on glass slabs and inserted in the ITMC instrument. Thermal activities of the macrophages alone and after titration of 100 µL of NP suspensions were compared. The relative interactive coefficients of macrophage-NP interactions were calculated using the heat exchange observed after NP titration. Control experiments were performed using cytochalasin B (Cyto B), a known phagocytosis inhibitor. The results of NP titration showed that the total thermal activity produced by macrophages changed according to the NP formulation. Mannosylated gelatin NPs were associated with the highest heat exchange, 75.4 ± 7.5 J, and thus the highest relative interactive coefficient, 9,269 ± 630 M-1. Polysorbate-80-coated NPs were associated with the lowest heat exchange, 15.2 ± 3.4 J, and the lowest interactive coefficient, 890 ± 120 M-1. Cyto B inhibited macrophage response to NPs, indicating a connection between the thermal activity recorded and NP phagocytosis. These results are in agreement with flow cytometry results. ITMC is a valuable tool to monitor the biological responses to nano-sized dosage forms such as NPs. Since the thermal activity of macrophage-NP interactions differed according to the type of NPs used, ITMC may provide a method to better understand phagocytosis and further the development of colloidal dosage forms.

Inhalable nanoparticles, a non-invasive approach to treat lung cancer in a mouse model.

Doxorubicin-loaded nanoparticles (NPs) were incorporated into inhalable effervescent and non-effervescent carrier particles using a spray-freeze drying technique. The prepared inhalable powders were tested in a tumor bearing Balb/c mouse model. Control mice were treated with blank inhalable NPs, inhalable lactose powder containing free doxorubicin, and intravenous injections of a suspension of doxorubicin NPs, doxorubicin solution, or saline solution. The survival of treatment groups was plotted with Kaplan-Meier curves. Animals treated with inhalable effervescent nanoparticle powder containing 30µg doxorubicin showed a highly significant improvement in survival compared to all other treatment groups. Mice in control groups treated with doxorubicin solution or doxorubicin NPs as intravenous injection, died in less than 50 days. Inhalable free doxorubicin showed high cardiac toxicity. Pathological samples showed large tumor masses in the lungs of animals not treated or treated with i.v. injections of doxorubicin NPs or doxorubicin solution. The lungs of animals treated with inhalable effervescent doxorubicin NPs showed fewer and much smaller tumors compared to the control groups, as visualized by MRI imaging which confirmed the observed pathology results. The present study demonstrates that inhalable effervescent doxorubicin NPs are an effective way to treat lung cancer. This non-invasive route of administration might change the way lung cancer is treated in the future.

Pulmonary delivery of inhalable nanoparticles: dry powder inhalers.

Pulmonary administration of inhalable nanoparticles (NPs) is an emerging area of interest. Dry powder inhalers may offer particular advantages for pulmonary administration of NPs. This article reviews research performed on the formulation of inhalable NPs as dry powder to achieve deep-lung deposition and enhance NP redispersibility. Moreover, the article summarizes up-to-date in vivo applications of inhalable NPs as dry powder inhalers.

Real-time imaging of interactions between dipalmitoylphosphatidylcholine monolayers and gelatin based nanoparticles using Brewster angle microscopy.

Given the current interest in the pulmonary route for targeted drug delivery, assessing the impact of drug delivery vehicles on the surfactant layer lining the surface of the lung alveoli is critical. As gelatin-based nanoparticles are one such vehicle, this study addresses their interaction with the major saturated phospholipid component of native lung surfactant, dipalmitoylphosphatidylcholine (DPPC). Nanoparticles are colloidal particles in the size range of 1 to 1000 nm that are presently investigated for site-specific drug delivery in the emerging field of nanomedicine. Monolayer studies of DPPC films were performed both in the presence and absence of nanoparticles in order to assess the interaction in terms of average molecular areas occupied at given surface pressures. In Brewster angle microscopy experiments, nanoparticles significantly changed the shape and reduced the size of DPPC domains suggesting a considerable interaction of the two systems. For safe pulmonary drug delivery, understanding this interaction is a prerequisite so nanoparticles can be a feasible alternative to more conventional therapies in the future.

Isothermal microcalorimetry as a quality by design tool to determine optimal blending sequences.

This study was designed to assess the value of isothermal microcalorimetry (ITMC) as a quality by design (QbD) tool to optimize blending conditions during tablet preparation. Powder mixtures that contain microcrystalline cellulose (MCC), dibasic calcium phosphate dihydrate (DCPD), and prednisone were prepared as 1:1:1 ratios using different blending sequences. ITMC was used to monitor the thermal activity of the powder mixtures before and after each blending process. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) were performed on all final powder mixtures. Final powder mixtures were used to prepare tablets with 10 mg prednisone content, and dissolution tests were performed on all tablet formulations. Using ITMC, it was observed that the powder mixtures had different thermal activity depending on the blending sequences of the ingredients. All mixtures prepared by mixing prednisone with DCPD in the first stage were associated with relatively fast and significant heat exchange. In contrast, mixing prednisone with MCC in the first step resulted in slower heat exchange. Powder mixture with high thermal activity showed extra DSC peaks, and their dissolution was generally slower compared to the other tablets. Blending is considered as a critical parameter in tablet preparation. This study showed that ITMC is a simple and efficient tool to monitor solid-state reactions between excipients and prednisone depending on blending sequences. ITMC has the potential to be used in QbD approaches to optimize blending parameters for prednisone tablets.