Correction: Microelectrochemical cell arrays for whole-cell currents recording through ion channel proteins based on trans-electroporation approach.

Correction for 'Microelectrochemical cell arrays for whole-cell currents recording through ion channel proteins based on trans-electroporation approach' by Tianyang Zheng, et al., Analyst, 2020, DOI: 10.1039/c9an01737b.

Retraction: Microelectrochemical cell arrays for whole-cell currents recording through ion channel proteins based on trans-electroporation approach.

Retraction of 'Microelectrochemical cell arrays for whole-cell currents recording through ion channel proteins based on trans-electroporation approach' by Tianyang Zheng et al., Analyst, 2020, 145, 197-205.

Activity of the Gramicidin A Ion Channel in a Lipid Membrane with Switchable Physical Properties.

Lipid bilayer membranes formed from the artificial 1,3-diamidophospholipid Pad-PC-Pad have the remarkable property that their hydrophobic thickness can be modified in situ: the particular arrangement of the fatty acid chains in Pad-PC-Pad allows them to fully interdigitate below 37 °C, substantially thinning the membrane with respect to the noninterdigitated state. Two stimuli, traversing the main phase transition temperature of the lipid or addition of cholesterol, have previously been shown to disable the interdigitated state. Both manipulations cause an increase in hydrophobic thickness of about 25 Å due to enhanced conformational entropy of the lipids. Here, we characterize the interdigitated state using electrophysiological recordings from free-standing lipid-membranes formed on micro structured electrode cavity arrays. Compared to standard membranes made from 1,2-diphytanoyl-sn-glycero-3-phosphocholin (DPhPC), pure Pad-PC-Pad membranes at room temperature had lowered electroporation threshold and higher capacitance. Ion channel formation by the peptide Gramicidin A was clearly facilitated in pure Pad-PC-Pad membranes at room temperature, with activity occurring at significantly lower peptide concentrations and channel dwell times increased by 2 orders of magnitude with respect to DPhPC-membranes. Both elevation of temperature beyond the phase transition and addition of cholesterol reduced channel dwell times, as expected if the reduced membrane thickness stabilized channel formation due to decreased hydrophobic mismatch.

Microelectrochemical cell arrays for whole-cell currents recording through ion channel proteins based on trans-electroporation approach.

High electrostability and long life-time of planar chip technology are crucial for electrophysiological measurements such as ionic current recording through ion channel proteins embedded in biological cell membrane. In this paper, we propose a novel planar microchip integrated with microelectrochemical cell array toward to a feasible solution for ion channel screening with high resolution and long life-time. In order to reduce the interference from the leakage currents, a synthetic lipid bilayer is applied to form a high sealing resistance. The whole-cell electrical access can be constructed via electroporating the lipid bilayer in close proximity to the cell membrane. Parameters of electroporation including amplitude and time scale are firstly optimized by using parallel electroporation to the lipid bilayers. In this approach, individual cells can be trapped to the target positions by applying dielectrophoresis (DEP) manipulation. Poly(ethylene glycol) (PEG) is employed with low concentration to facilitate the closed contact between the cells and the lipid bilayer to increase the efficiency of the whole-cell mode construction. Through this chip based method, stable current recordings through inward rectifier potassium (Kir) ion channels embedded in rat basophilic leukemia (RBL-1) cell membrane are achieved with high electrical sealing resistance (over 1 GΩ). In addition, without need for complex fluidic connections, this method allows for an easy operation and further miniaturization of the measuring system.

Size-dependent interaction of a 3-arm star poly(ethylene glycol) with two biological nanopores.

We use two pore-forming proteins, alpha-hemolysin and aerolysin, to compare the polymer size-dependence of ionic current block by two types of ethyleneglycol polymers: 1) linear and 2) 3-arm star poly(ethylene glycol), both applied as a polydisperse mixture of average mass 1kDa under high salt conditions. The results demonstrate that monomer size sensitivity, as known for linear PEGs, is conserved for the star polymers with only subtle differences in the dependence of the residual conductance on monomer number. To explain this absence of a dominant effect of polymer architecture, we propose that PEG adsorbs to the inner pore wall in a collapsed, salted-out state, likely due to the effect of hydrophobic residues in the pore wall on the availability of water for hydration.

Translocation of Precision Polymers through Biological Nanopores.

Nanopore analysis, which is, currently, chiefly used for DNA sequencing, is also an appealing technique for characterizing abiotic polymers. As a first step toward this goal, nanopore detection of non-natural monodispersed poly(phosphodiester)s as candidate backbone structures is reported herein. Two model homopolymers containing phosphopropyl repeat units (i.e., 56 or 104 r.u.) and a short thymidine nucleotide sequence are analyzed in the present work. They are tested in two different biological nanopores, α-hemolysin from Staphylococcus aureus, and aerolysin from Aeromonas hydrophila. These recordings are performed in aqueous medium at different KCl concentrations and various driving voltages. The data show a complex interaction with evidence for voltage dependence and threading, and underline the influence of the molecular structure and orientation of the precision poly(phosphodiester)s on the observed residual current signal as well as on the translocation dynamics. In particular, they suggest a dominant entropic contribution due to the high flexibility of the phosphodiester homopolymer.

Automated formation of lipid membrane microarrays for ionic single-molecule sensing with protein nanopores.

Efficient use of membrane protein nanopores in ionic single-molecule sensing requires technology for the reliable formation of suspended molecular membranes densely arrayed in formats that allow high-resolution electrical recording. Here, automated formation of bimolecular lipid layers is shown using a simple process where a poly(tetrafluoroethylene)-coated magnetic bar is remotely actuated to perform a turning motion, thereby spreading phospholipid in organic solvent on a nonpolar surface containing a <1 mm(2) 4 × 4 array of apertures with embedded microelectrodes (microelectrode cavity array). Parallel and high-resolution single-molecule detection by single nanopores is demonstrated on the resulting bilayer arrays, which are shown to form by a classical but very rapid self-assembly process. The technique provides a robust and scalable solution for the problem of reliable, automated formation of multiple independent lipid bilayers in a dense microarray format, while preserving the favorable electrical properties of the microelectrode cavity array.

Antibiotic translocation through porins studied in planar lipid bilayers using parallel platforms.

In general, the method of choice to characterize the conductance properties of channel-forming bacterial porins is electrophysiology. Here, the classical method is to reconstitute single porins into planar lipid bilayers to derive functional information from the observed channel conductance. In addition to an estimated pore size, ion selectivity or transport properties in general are of importance. For the latter, measuring the ion current fluctuation can provide some information about the mode of transport of charged molecules penetrating the proteins. For instance, increasing the external voltage modifies the residence time in the channel: charged molecules with the ability to permeate through channels will travel faster whereas non-permeating molecules get pushed to the constriction zone with enhanced residence time. Here, we are interested in the ability of antibiotics to permeate channels and compare different techniques to reveal fast events.

Electrophysiology on Channel-Forming Proteins in Artificial Lipid Bilayers: Next-Generation Instrumentation for Multiple Recordings in Parallel.

Artificial lipid bilayers have been used for several decades to study channel-forming pores and ion channels in membranes. Until recently, the classical two-chamber setups have been primarily used for studying the biophysical properties of pore forming proteins. Within the last 10 years, instruments for automated lipid bilayer measurements have been developed and are now commercially available. This chapter focuses on protein purification and reconstitution of channel-forming proteins into lipid bilayers using a classic setup and on the commercially available systems, the Orbit mini and Orbit 16.

Pore-forming toxins as tools for polymer analytics: From sizing to sequencing.

We report here on the nanopore resistive pulse sensing (Np-RPS) method, involving pore-forming toxins as tools for polymer analytics at single molecule level. Np-RPS is an electrical method for the label-free detection of single molecules. A molecule interacting with the pore causes a change of the electrical resistance of the pore, called a resistive pulse, associated with a measurable transient current blockade. The features of the blockades, in particular their depth and duration, contain information on the molecular properties of the analyte. We first revisit the history of Np-RPS, then we discuss the effect of the configuration of the molecule/nanopore interaction on the molecular information that can be extracted from the signal, illustrated in two different regimes that either favor molecular sequencing or molecular sizing. Specifically, we focus on the sizing regime and on the use of two different pore-forming toxins, staphylococcal α-hemolysin (αHL) and aerolysin (AeL) nanopores, for the characterization of water-soluble polymers (poly-(ethylene glycol), (PEG)), homopeptides, and heteropeptides. We discuss how nanopore sizing of polymers could be envisioned as a new approach for peptide/protein sequencing.

A Fully Integrated Current-Mode Continuous-Time Delta-Sigma Modulator for Biological Nanopore Read Out.

This paper presents a fully integrated low noise current-to-digital converter based on current-mode continuous-time delta-sigma modulators (CT DSMs). The circuit was realized in standard 0.35  µm complimentary metal-oxide-semiconductor process and achieves a noise floor as low as 200 fA rms within a bandwidth of 10 kHz. Thanks to the continuous-time architecture, the oversampling together with the implicit anti-aliasing behavior of the current-mode CT DSM prevents the back folding of any out-of-band signals and noises. Running at a sampling frequency of 1.6 MHz, the circuit achieves a measured worst case anti-aliasing filtering of -110 dB for an out-of-band signal at 1.59 MHz. This characteristic eliminates the need of an anti-aliasing filter, which reduces the complexity as well as the area and power consumption. Two feedback versions, a transistor based as well as a capacitor-based current division have been used to reduce the reference current noise. The transistor-based current division feedback modulator consumes a power of 6.73 mW and occupies an area of 0.63 mm 2, whereas the capacitor based consumes a power of 4.6 mW and occupies an area of 0.32 mm 2. Both of them operate at a supply voltage of ±1.5 V.

Planar microelectrode-cavity array for high-resolution and parallel electrical recording of membrane ionic currents.

Increasing the throughput and resolution of electrical recording of currents through ion conducting channels and pores is an important technical challenge both for the functional analysis of ion channel proteins and for the application of nanoscale pores in single molecule analytical tasks. We present a novel design based on sub-picoliter-cavities arrayed in a polymer substrate and endowed with individual planar microelectrodes that allows low-noise and parallel electrical recording from ion channels and pores. Resolution of voltage-dependent current transitions of alamethicin channels as well as polyethylene-glycol-induced blocking events of alpha-hemolysin nanopores on the submillisecond time scale is demonstrated using this device.

High-Resolution Size-Discrimination of Single Nonionic Synthetic Polymers with a Highly Charged Biological Nanopore.

Electrophysiological studies of the interaction of polymers with pores formed by bacterial toxins (1) provide a window on single molecule interaction with proteins in real time, (2) report on the behavior of macromolecules in confinement, and (3) enable label-free single molecule sensing. Using pores formed by the staphylococcal toxin α-hemolysin (aHL), a particularly pertinent observation was that, under high salt conditions (3-4 M KCl), the current through the pore is blocked for periods of hundreds of microseconds to milliseconds by poly(ethylene glycol) (PEG) oligomers (degree of polymerization approximately 10-60). Notably, this block showed monomeric sensitivity on the degree of polymerization of individual oligomers, allowing the construction of size or mass spectra from the residual current values. Here, we show that the current through the pore formed by aerolysin (AeL) from Aeromonas hydrophila is also blocked by PEG but with drastic differences in the voltage-dependence of the interaction. In contrast to aHL, AeL strongly binds PEG at high transmembrane voltages. This fact, which is likely related to AeL's highly charged pore wall, allows discrimination of polymer sizes with particularly high resolution. Multiple applications are now conceivable with this pore to screen various nonionic or charged polymers.

Nanopore-based single-molecule mass spectrometry on a lipid membrane microarray.

We report on parallel high-resolution electrical single-molecule analysis on a chip-based nanopore microarray. Lipid bilayers of <20 µm diameter containing single alpha-hemolysin pores were formed on arrays of subpicoliter cavities containing individual microelectrodes (microelectrode cavity array, MECA), and ion conductance-based single molecule mass spectrometry was performed on mixtures of poly(ethylene glycol) molecules of different length. We thereby demonstrate the function of the MECA device as a chip-based platform for array-format nanopore recordings with a resolution at least equal to that of established single microbilayer supports. We conclude that devices based on MECAs may enable more widespread analytical use of nanopores by providing the high throughput and ease of operation of a high-density array format while maintaining or exceeding the precision of state-of-the-art microbilayer recordings.

Characteristics of highly flexible PDMS membranes for long-term mechanostimulation of biological tissue.

Measurement of mechanical properties of soft biological tissue remains a challenging task in mechanobiology. Recently, we presented a bioreactor for simultaneous mechanostimulation and analysis of the mechanical properties of soft biological tissue samples. In this bioreactor, the sample is stretched via deflection of a flexible membrane. It was found that the use of highly compliant membranes increases accuracy of measurements. Here, we describe the production process and characteristics of thin and flexible membranes of polydimethylsiloxane (PDMS) designed to improve the signal-to-noise ratio of our bioreactor. By a spin-coating process, PDMS membranes were built by polymerization of a two component elastomer. The influence of resin components proportion, rotation duration, and speed of the spinning were related to the membrane mechanics. Membranes of 22 mm inner diameter and 33 to 36 microm thickness at homogeneous profiles were produced. Isolated rat diaphragms served as biological tissue samples. Mechanical properties of the membranes remained constant during 24 h of mechanostimulation. In contrast, time- and strain-dependent mechanical properties of the diaphragms were found.