Investigation of Pressure Effects in the Bimetallic Transplutonium Tetrazolate Complexes [(An(pmtz)2(H2O)3)2(µ-pmtz)]2(pmtz)2·nH2O (An3+ = Cm3+, Bk3+, and Cf3+).

Understanding the effects of pressure on actinide compounds is an integral part of safe nuclear waste storage in deep geologic repositories and provides a means of systematically altering the structure and properties. However, detailing how the effects of pressure evolve across the actinide series in the later elements is not typically undertaken because of the challenges of conducting research on these unstable isotopes. Here, a family of bimetallic actinide complexes, [(An(pmtz)2(H2O)3)2(µ-pmtz)]2(pmtz)2·nH2O (An3+ = Cm3+, Bk3+, and Cf3+, pmtz- = 5-(pyrimidyl)tetrazolate; Cm1, Bk1, and Cf1), are reported and represent the first structurally characterized bimetallic berkelium and californium compounds. The pressure response as determined from UV-vis-NIR transitions varies for Cm1, Bk1, and Cf1. The 5f → 5f transitions in Cm1 are notably more sensitive to pressure compared to those in Bk1 and Cf1 and show substantial bathochromic shifting of several 5f → 5f transitions. In the case of Bk1, an ingrowth of a metal-to-ligand charge-transfer transition occurs at elevated pressures because of the accessible Bk3+/Bk4+ couple. For Cf1, no substantial transition shifting or emergence of MLCT transitions is observed at elevated pressures because of the prohibitive energetics of the Cf3+/Cf4+ couple and reduced sensitivity of the 5f → 5f transitions to the local coordination environment because of the more contracted 5f shell versus Cm3+ and Bk3+.

Transformation of Mononuclear Plutonium(III) Tetrazolate Complexes into Dinuclear Complexes in the Solid State.

The salt metathesis reaction of Na(pmtz)·H2O [pmtz- = 5-(pyrimidyl)tetrazolate] and PuBr3·nH2O in an aqueous media leads to the formation of the mononuclear compound [Pu(pmtz)3(H2O)3]·(3 + n) H2O (Pu1, n = ∼8) that is isotypic with the lanthanide compounds [Ln(pmtz)3(H2O)3]·(3 + n) H2O (Ln = Ce-Nd). Dissolution and recrystallization of Pu1 in water yields the dinuclear compound {[Pu(pmtz)2(H2O)3]2(µ-pmtz)}2(pmtz)2·14H2O (Pu2), which is isotypic with the lanthanide compounds {[Ln(pmtz)2(H2O)3]2(µ-pmtz)}2(pmtz)2·14H2O (Ln = Nd and Sm). Like their nine-coordinate ionic radii, the M-O and M-N bond lengths in Pu1/Pu2 and Nd1/Nd2, respectively, are within error of one another. The Laporte-forbidden 4f → 4f and 5f → 5f transitions are also assigned in the UV-vis-NIR spectra for these f-element tetrazolate coordination compounds.

Co-Crystallization of Plutonium(III) and Plutonium(IV) Diglycolamides with Pu(III) and Pu(IV) Hexanitrato Anions: A Route to Redox Variants of [PuIII,IV(DGA)3][PuIII,IV(NO3)6]x.

N,N,N',N'-tetramethyl diglycolamide (TMDGA), a methylated variant of the diglycolamide extractants being proposed as curium holdback reagents in advanced used nuclear fuel reprocessing technologies, has been crystallized with plutonium, a transuranic actinide that has multiple accessible oxidation states. Two plutonium TMDGA complexes, [PuIII(TMDGA)3][PuIII(NO3)6] and[PuIV(TMDGA)3][PuIV(NO3)6]2·0.75MeOH, were crystallized through solvent diffusion of a reaction mixture containing plutonium(III) nitrate and TMDGA. The sample was then partially oxidized by air to yield [PuIV(TMDGA)3][PuIV(NO3)6]2·0.75MeOH. Single-crystal X-ray diffraction reveals that the multinuclear systems crystallize with hexanitrato anionic species, providing insight into the first solid-state isolation of the elusive trivalent plutonium hexanitrato species. Crystallography data show a change in geometry around the TMDGA metal center from Pu3+ to Pu4+, with the symmetry increasing approximately from C4v to D3h. These complexes provide a rare opportunity to investigate the bond metrics of plutonium in two different oxidation states with similar coordination environments. Further, these new structures provide insight into the potential chemical and structural differences arising from the radiation-induced formation of transient tetravalent curium oxidation states in used nuclear fuel reprocessing streams.

Radium Revisited: Revitalization of the Coordination Chemistry of Nature's Largest +2 Cation.

The crystallization, single crystal structure, and Raman spectroscopy of Ra(NO3)2 have been investigated by experimentation and theory, which represent the first pure radium compound characterized by single crystal X-ray diffraction. The Ra2+ centers are bound by six chelating nitrate anions to form an anticuboctahedral geometry. The Raman spectrum acquired from a single crystal of Ra(NO3)2 generally occurs at a lower frequency than found in Ba(NO3)2, as expected. Computational studies on Ra(NO3)2 provide an estimation of the bond orders via Wiberg bond indices and indicate that Ra-O interactions are weak with values of 0.025 and 0.026 for Ra-O bonds. Inspection of natural bond orbitals and natural localized molecular orbitals suggest negligible orbital mixing. However, second-order perturbation interactions show that donation from the lone pairs of the nitrate oxygen atoms to the 7s orbitals of Ra2+ stabilizes each Ra-O interaction by ca. 5 kcal mol-1.

Stabilization of Pu(IV) in PuBr4(OPCy3)2 and Comparisons with Structurally Similar ThX4(OPR3)2 (R = Cy, Ph) Molecules.

The pursuit of a trivalent plutonium halide phosphine oxide compound, e.g., "PuBr3(OPR)3," instead led to the isolation of the tetravalent trans-PuIVBr4(OPCy3)2, PuBr/Cy, compound by spontaneous oxidation of PuIII. The donating nature of phosphine oxides has allowed the isolation and characterization of PuBr/Cy by crystallographic, multinuclear NMR, solid state, and solution phase UV-vis-NIR spectroscopic techniques. The presence of a putative plutonyl(VI) complex formulated as "trans-PuVIO2Br2(OPCy3)2" was also observed spectroscopically and tentatively by single-crystal X-ray diffraction as a cocrystal of PuBr/Cy. A series of trans-ThX4(OPCy3)2 (X = Cl, ThCl/Cy; Br, ThBr/Cy; I, ThI/Cy) complexes were synthesized for comparison to PuBr/Cy. The triphenylphosphine oxide, OPPh3, complexes, trans-AnI4(OPPh3)2 (An = Th, ThI/Ph; U, UI/Ph), were also synthesized for comparison, completing the series trans-UX4(OPPh3)2 (X = Cl, Br, I), UX/Ph. To enable the synthesis of ThI/Cy and ThI/Ph, a new nonaqueous thorium iodide starting material, ThI4(Et2O)2, was synthesized. The syntheses of organic solvent soluble ThI4L2 (L = Et2O, OPCy3, and OPPh3) are the first examples of crystallographically characterized neutral thorium tetraiodide materials beyond binary ThI4. To show the viability of ThI4(Et2O)2 as a starting material for organothorium chemistry, (C5Me4H)3ThI was synthesized and crystallographically characterized.

Syntheses and Characterization of Tetrazolate-Based Lanthanide Compounds and Selective Crystallization Separation of Neodymium and Dysprosium.

Selective crystallization offers new opportunities for separating neodymium and dysprosium, which are considerably important in permanent magnets. Two water-soluble nitrogen-rich tetrazolate-based ligands, dtp2- (H2dtp = 2,3-di-1H-tetrazol-5-ylpyrazine) and H2ibt- [H3ibt = 4,5-bis(tetrazol-5-yl)imidazole], allow the separation of Nd3+ and Dy3+ through selective crystallization. The reactions of Ln3+ with the ligand Na2(dtp)·2H2O lead to two distinct phases, Na[Ln(dtp)(H2O)8](dtp)·H2O (Lndtp1; Ln = La-Pr) and [Ln(H2O)8](Hdtp)(dtp)·H2O (Lndtp2; Ln = Nd and Sm-Lu). Three different compound types, [Ln(H2ibt)2(H2O)6](H2ibt)·3(H2O) (Lnibt1; Ln = La or Ce), [Ln(H2ibt)(H2O)7](H2ibt)2·4(H2O) (Lnibt2; Ln = Pr or Nd), and [Ln(Hibt)(H2ibt)(H2O)4]·4+x(H2O) (Lnibt3; Ln = Sm-Lu), are obtained from reacting Ln3+ and Na(H2ibt)·3(H2O). Two different phases are observed for Nd(Lnibt2) and Dy(Lnibt3) in the system of H2ibt-, which leads to crystallization-based separation of Nd/Dy with a separation factor of 32 ± 0.7, 10 times higher than that of dtp2-, and a short separation time of 20 s (1 day for dtp2-). The higher performance of H2ibt- compared to that of dtp2- provides guidance for the rational design of water-soluble tetrazolate-derived ligands for selective crystallization.

Two Neptunium(III) Mellitate Coordination Polymers: Completing the Series Np-Cf of Trans-Uranic An(III) Mellitates.

Two neptunium(III) mellitates, 237Np2(mell)(H2O)9·1.5H2O (Np-1α) and 237Np2(mell)(H2O)8·2H2O (Np-1ß), have been synthesized from 237NpCl4(dme)2 by reduction with KC8 and subsequent reaction with an aqueous solution of mellitic acid (H6mell). Characterization by single-crystal X-ray crystallography and UV-vis-NIR spectroscopy confirms that the neptunium is in its +3 oxidation state and both polymorphs are isostructural to the previously reported plutonium mellitates. Of the two morphologies, Np-1α is indefinitely stable in air, while Np-1ß slowly oxidizes over several months. This is due to the change in the energy of the metal-ligand charge-transfer absorption exhibited by these compounds attributed to differing numbers of carboxylate bonds to Np(III), where in Np-1ß the energy is low enough to result in spontaneous oxidation.

In Vivo Uranium Sequestration using a Nanoscale Metal-Organic Framework.

An agent for actinide sequestration with fast uranium uptake kinetics and efficient in vivo uranium removal using a nanoscale metal-organic framework (nano-MOF) is proposed. UiO-66 nanoparticles post-synthetically functionalized with carboxyl groups, UiO-66-(COOH)4 -180, exhibit the fastest uranium uptake kinetics reported with more than 65 % of uranyl in fetal bovine serum (FBS) removed within 5 min. Moreover, the in vivo bio-distribution studies show that the material partially accumulates in kidneys and femurs where uranium mainly deposits facilitating the in vivo sequestration of uranium. The results of the in vivo uranium decorporation assays with mice show that UiO-66-(COOH)4 -180 could successfully reduce the amounts of uranyl deposited in kidneys and femurs by up to 55.4 % and 36.5 %, respectively, and is significantly more efficient than the commercial actinide decorporation agent, ZnNa3 -DTPA.

A Single Small-Scale Plutonium Redox Reaction System Yields Three Crystallographically-Characterizable Organoplutonium Complexes.

An approach to obtaining substantial amounts of data from a hazardous starting material that can only be obtained and handled in small quantities is demonstrated by the investigation of a single small-scale reaction of cyclooctatetraene, C8H8, with a solution obtained from the reduction of Cp'3Pu (Cp' = C5H4SiMe3) with potassium graphite. This one reaction coupled with oxidation of a product has provided single-crystal X-ray structural data on three organoplutonium compounds as well as information on redox chemistry thereby demonstrating an efficient route to new reactivity and structural information on this highly radioactive element. The crystal structures were obtained from the reduction of C8H8 by a putative Pu(II) complex, (Cp'3PuII)1-, generated in situ, to form the Pu(III) cyclooctatetraenide complex, [K(crypt)][(C8H8)2PuIII], 1-Pu, and the tetra(cyclopentadienyl) Pu(III) complex, [K(crypt)][Cp'4PuIII], 2-Pu. Oxidation of the sample of 1-Pu with Ag(I) afforded a third organoplutonium complex that has been structurally characterized for the first time, (C8H8)2PuIV, 3-Pu. Complexes 1-Pu and 3-Pu contain Pu sandwiched between parallel (C8H8)2- rings. The (Cp'4PuIII)- anion in 2-Pu features three η5-Cp' rings and one η1-Cp' ring, which is a rare example of a formal Pu-C η1-bond. In addition, this study addresses the challenge of small-scale synthesis imparted by radiological and material availability of transuranium isotopes, in particular that of pure metal samples. A route to an anhydrous Pu(III) starting material from the more readily available PuIVO2 was developed to facilitate reproducible syntheses and allow complete spectroscopic analysis of 1-Pu and 2-Pu. PuIVO2 was converted to PuIIIBr3(DME)2 (DME = CH3OCH2CH2OCH3) and subsequently PuIIIBr3(THF)x, which was used to independently synthesize 1-Pu, 2-Pu, and 3-Pu.

3,2-Hydroxypyridinone-Grafted Chitosan Oligosaccharide Nanoparticles as Efficient Decorporation Agents for Simultaneous Removal of Uranium and Radiation-Induced Reactive Oxygen Species in Vivo.

Most of the key radionuclides in the nuclear fuel cycle, such as actinides, possess a combination of heavy metal chemotoxicity and radiotoxicity and therefore represent a severe threat to the ecological environment and public safety. The radiotoxicity originates from direct radiation-induced organ damage and indirect damage, mostly through radiation-induced reactive oxygen species (ROS). Although effective chelating agents that can accelerate the excretion of actinides, such as uranium, have been developed in the past several decades, very few of them can reduce radiation-induced damage from internal contamination. In fact, the strategy of simultaneous removal of actinides and their induced-ROS in vivo has scarcely been considered. Here, we report a 3,2-hydroxypyridinone-grafted chitosan oligosaccharide nanoparticle (COS-HOPO) as a new type of decorporation agent that is effective for the removal of both uranium and ROS in vivo. The cytotoxicity and decorporation assays indicate that the marriage of chitosan oligosaccharide (COS) and hydroxypyridinone (HOPO) gives rise to a remarkable decrease in toxicity and promotion of the uranium removal capability from both kidneys and femurs. The decorporation efficacy can reach up to 43% in rat proximal tubular epithelial cells (NRK-52E), 44% in kidneys, and 32% in femurs. Moreover, the ROS levels of the cells treated with COS-HOPO are significantly lower than those of the control group, implying a promising radiation protection effect. The detoxification mechanism of COS-HOPO is closely related to both chelating U(VI)- and scavenging U(VI)-induced intracellular ROS.

Employing an Unsaturated Th4+ Site in a Porous Thorium-Organic Framework for Kr/Xe Uptake and Separation.

Actinide based metal-organic frameworks (MOFs) are unique not only because compared to the transition-metal and lanthanide systems they are substantially less explored, but also owing to the uniqueness of actinide ions in bonding and coordination. Now a 3D thorium-organic framework (SCU-11) contains a series of cages with an effective size of ca. 21×24 Å. Th4+ in SCU-11 is 10-coordinate with a bicapped square prism coordination geometry, which has never been documented for any metal cation complexes. The bicapped position is occupied by two coordinated water molecules that can be removed to afford a very unique open Th4+ site, confirmed by X-ray diffraction, color change, thermogravimetry, and spectroscopy. The degassed phase (SCU-11-A) exhibits a Brunauer-Emmett-Teller surface area of 1272 m2 g-1 , one of the highest values among reported actinide materials, enabling it to sufficiently retain water vapor, Kr, and Xe with uptake capacities of 234 cm3 g-1 , 0.77 mmol g-1 , 3.17 mmol g-1 , respectively, and a Xe/Kr selectivity of 5.7.

Highly Sensitive and Selective Uranium Detection in Natural Water Systems Using a Luminescent Mesoporous Metal-Organic Framework Equipped with Abundant Lewis Basic Sites: A Combined Batch, X-ray Absorption Spectroscopy, and First Principles Simulation Investigation.

Uranium is not only a strategic resource for the nuclear industry but also a global contaminant with high toxicity. Although several strategies have been established for detecting uranyl ions in water, searching for new uranium sensor material with great sensitivity, selectivity, and stability remains a challenge. We introduce here a hydrolytically stable mesoporous terbium(III)-based MOF material compound 1, whose channels are as large as 27 Å × 23 Å and are equipped with abundant exposed Lewis basic sites, the luminescence intensity of which can be efficiently and selectively quenched by uranyl ions. The detection limit in deionized water reaches 0.9 µg/L, far below the maximum contamination standard of 30 µg/L in drinking water defined by the United States Environmental Protection Agency, making compound 1 currently the only MOF material that can achieve this goal. More importantly, this material exhibits great capability in detecting uranyl ions in natural water systems such as lake water and seawater with pH being adjusted to 4, where huge excesses of competing ions are present. The uranyl detection limits in Dushu Lake water and in seawater were calculated to be 14.0 and 3.5 µg/L, respectively. This great detection capability originates from the selective binding of uranyl ions onto the Lewis basic sites of the MOF material, as demonstrated by synchrotron radiation extended X-ray adsorption fine structure, X-ray adsorption near edge structure, and first principles calculations, further leading to an effective energy transfer between the uranyl ions and the MOF skeleton.

First Cationic Uranyl-Organic Framework with Anion-Exchange Capabilities.

By controlling the extent of hydrolysis during the self-assembly process of a zwitterionic-based ligand with uranyl cations, we observed a structural evolution from the neutral uranyl-organic framework [(UO2)2(TTTPC)(OH)O(COOH)]·1.5DMF·7H2O (SCU-6) to the first cationic uranyl-organic framework with the formula of [(UO2)(HTTTPC)(OH)]Br·1.5DMF·4H2O (SCU-7). The crystal structures of SCU-6 and SCU-7 are layers built with tetranuclear and dinuclear uranyl clusters, respectively. Exchangeable halide anions are present in the interlaminar spaces balancing the positive charge of layers in SCU-7. Therefore, SCU-7 is able to effectively remove perrhenate anions from aqueous solution. Meanwhile, the H2PO4(-)-exchanged SCU-7 material exhibits a moderate proton conductivity of 8.70 × 10(-5) S cm(-1) at 50 °C and 90% relative humidity, representing nearly 80 times enhancement compared to the original material.

Umbellate distortions of the uranyl coordination environment result in a stable and porous polycatenated framework that can effectively remove cesium from aqueous solutions.

Searching for new chemically durable and radiation-resistant absorbent materials for actinides and their fission products generated in the nuclear fuel cycle remain highly desirable, for both waste management and contamination remediation. Here we present a rare case of 3D uranyl organic framework material built through polycatenating of three sets of graphene-like layers, which exhibits significant umbellate distortions in the uranyl equatorial planes studied thoroughly by linear transit calculations. This unique structural arrangement leads to high ß and γ radiation-resistance and chemical stability in aqueous solutions within a wide pH range from 3 to 12. Being equipped with the highest surface area among all actinide compounds known to date and completely exchangeable [(CH3)2NH2](+) cations in the structure, this material is able to selectively remove cesium from aqueous solutions while retaining the polycatenated framework structure.

Isolation of a californium(II) crown-ether complex.

The actinides, from californium to nobelium (Z = 98-102), are known to have an accessible +2 oxidation state. Understanding the origin of this chemical behaviour requires characterizing CfII materials, but investigations are hampered by the fact that they have remained difficult to isolate. This partly arises from the intrinsic challenges of manipulating this unstable element, as well as a lack of suitable reductants that do not reduce CfIII to Cf°. Here we show that a CfII crown-ether complex, Cf(18-crown-6)I2, can be prepared using an Al/Hg amalgam as a reductant. Spectroscopic evidence shows that CfIII can be quantitatively reduced to CfII, and rapid radiolytic re-oxidation in solution yields co-crystallized mixtures of CfII and CfIII complexes without the Al/Hg amalgam. Quantum-chemical calculations show that the Cf‒ligand interactions are highly ionic and that 5f/6d mixing is absent, resulting in weak 5f→5f transitions and an absorption spectrum dominated by 5f→6d transitions.

Efficient Xe/Kr Separation Based on a Lanthanide-Organic Framework with One-Dimensional Local Positively Charged Rhomboid Channels.

Efficient xenon/krypton (Xe/Kr) separation has played an important role in industry due to the wide application of high-purity Xe and with regard to the safe disposal of radioactive noble gases (85Kr and 133Xe). A less energy-demanding separation technology, adsorptive separation using porous solid materials, has been proposed to replace the traditional cryogenic distillation with intensive energy consumption. As a cutting-edge class of porous materials, metal-organic frameworks (MOFs) featuring permanent porosity, designable chemical functionalities, and tunable pore sizes hold great promise for Xe/Kr separation. Here, we report a two-dimensional (2D) lanthanide-organic framework (termed LPC-MOF, [Eu(Ccbp)(NO3)(HCOO)]·DMF0.3(H2O)2.5) with one-dimensional (1D) local positively charged rhomboid channels whose size matches well with the kinetic diameter of Xe, leading to its superior Xe/Kr separation performance. Column breakthrough experiments demonstrate that LPC-MOF exhibits a high Xe/Kr selectivity of 12.4 and an Xe adsorption amount of 3.39 mmol kg-1 under simulated conditions for real used nuclear fuel (UNF)-reprocessing plants. Furthermore, density functional theory (DFT) calculations elucidate not only the intrinsic mechanisms of Xe/Kr separation at the molecular level but also the detailed influence of the local positive charge (N+) on the performance of Xe/Kr separation in the MOF system.

Synthesis, characterization, and high-pressure studies of a 3D berkelium(III) carboxylate framework material.

A berkelium(III) mellitate, Bk2[C6(CO2)6](H2O)8·2H2O, was synthesized and rapidly crystallized by reacting mellitic acid, C6(CO2H)6, and BkBr3·nH2O in an aqueous medium. Single crystal X-ray diffraction shows that the compound crystallizes as a three-dimensional framework isostructural with Pu(III), Am(III), and Cm(III) mellitates. UV-vis-NIR spectroscopic studies as a function of pressure were performed using a diamond anvil cell and show that the 5f → 5f transitions of Bk3+ display enhanced hypsochromic shifting when compared to other An(III) mellitates.

Synthesis, characterization, and theoretical analysis of a plutonyl phosphine oxide complex.

The interplay of bond strength and covalency are examined in AnO2Cl2(OPcy3)2 (An = Pu, U) complexes. The synthesis of trans-PuO2Cl2(OPcy3)2, 1-Pu, has been carried out and confirmed by single crystal X-ray diffraction along with UV-vis-NIR, and 31P NMR spectroscopies. Theoretical analysis finds that despite a higher calculated covalency for the Pu-Cl interaction, the Pu-OPcy3 interaction is stronger due to the accumulation of electron density in the interatomic region. The coordination of equatorial ligands slightly decreases the strength of the PuOyl interactions relative to the free gas phase (PuO2)2+ ion.

Phase transition triggered aggregation-induced emission in a photoluminescent uranyl-organic framework.

When exposed to water, the two-dimensional uranyl-organic layered compound [(CH3)2NH2][(UO2)(BCPBA)]·2DMF·H2O (H3BCPBA = 3,5-bis (4'-carboxylphenoxy) benzoic acid) gradually undergoes a complete single-crystal-to-single-crystal phase transition to [(CH3)2NH2][(UO2)(BCPBA)]·3.4H2O, resulting in an enhanced ligand-ligand interaction between the adjacent layers. This process gives rise to initial quenching of the uranyl photoluminescence followed by subsequent recovery of the photoluminescence with a much elevated intensity, as a unique case of aggregation-induced emission in an extended solid system, further confirmed by DFT analysis on bonding.