Styryl dyes with N-Methylpiperazine and N-Phenylpiperazine Functionality: AT-DNA and G-quadruplex binding ligands and theranostic agents.

New monomethine, unsymmetrical styryl dyes consisting of benzothiazole and N-methylpiperazine or N-phenylpiperazine scaffolds were synthesized, and their binding affinities for different ds-polynucleotides and G-quadruplex were studied. Substitution of piperazine unit with methyl or phenyl group strongly influenced their binding modes, binding affinities, spectroscopic responses and antiproliferative activities. Compounds with N-methylpiperazine substituents showed a significant preference for AT-DNA polynucleotides and demonstrated AT-minor groove binding, which manifested in strong fluorescence increase, significant double helix stabilization, and positive induced circular dichroism spectra. These compounds formed complexes with G-quadruplex by π-π stacking interactions of dye with the top or bottom G-tetrad. Bulkier compounds with N-phenylpiperazine function are probably bound to ds-polynucleotide by partial intercalation between base pairs. On the other hand, they showed stronger stabilization of G-quadruplex compared to methyl-substituted compounds. Fluorimetric titrations pointed to possible mixed stoichiometry's: 1:1 complex with π-π stacking interactions of dye on the top or bottom G-tetrad and 1:2 complex with dye positioned between two G-quadruplex molecules. Bulkier dyes with N-phenylpiperazine fragments demonstrated micromolar and submicromolar antiproliferative activity that was especially pronounced for leukaemia and lymphoma. Flow cytometric assay shows dose- and time-dependent increase in SubG0/G1 phase. Furthermore, the compounds enter the cells readily and accumulate in the mitochondrial space, co-localize with the standard mitochondrial markers.

Solution-related in Vitro Dewetting Behavior of Various Daily Disposable Contact Lenses.

SIGNIFICANCE: The dewetting process of contact lenses (CLs) is a result of material and solution properties as well as environmental factors. This article describes an investigational approach to observe and describe dewetting characteristics of different CL material and solution combinations. PURPOSE: This study aimed to determine the in vitro dewetting characteristics of various daily disposable CLs that were assessed using a noninvasive keratograph dewetting procedure (noninvasive keratograph dry-up time). In vitro dewetting data of the same CL materials soaked in saline solution and artificial tear solution (ATS) were measured to determine additional dewetting characteristics. METHODS: Noninvasive keratograph dry-up time was measured for six different soft CL materials and three different test conditions, in their specific blister solution, after exposure to saline and an ATS. Twenty CLs of each solution/material combination were assessed after an 8-hour soaking, during a 180-second dewetting observation, and the results were expressed by area under the curve values. RESULTS: Fastest dewetting occurred for all materials when measured out of saline, indicated by the highest averaged area under the curve value of 9243.3 ± 38.3 over all lens materials. Slower dewetting was detected for all materials when measured out of their specific blister solution (7755.9 ± 37.1) and out of ATS (7988.8 ± 40.0). Intragroup results were statistically significantly different for all solutions showing the smallest differences within the ATS group ( P < .001, Kruskal-Wallis test). CONCLUSIONS: A pure saline thin film is not an ideal representation of a complex tear film layer of a healthy human because it lacks any evaporative protection by a lipid layer. The use of an ATS, which more likely mimics the natural tear film, allowed in this experimental in vitro project to decrease the gap to the in vivo field. In vitro dewetting information in connection with the blister solution allows only a theoretical conclusion about the initial lens wear after lens insertion.

Temperature Sensing in Cells Using Polymeric Upconversion Nanocapsules.

Monitoring local temperature inside cells is crucial when interpreting biological activities as enhanced cellular metabolism leads to higher heat production and is commonly correlated with the presence of diseases such as cancer. In this study, we report on polymeric upconversion nanocapsules for potential use as local nanothermometers in cells by exploiting the temperature dependence of the triplet-triplet annihilation upconversion phenomenon. Nanocapsules synthesized by the miniemulsion solvent evaporation technique are composed of a polymer shell and a liquid core of rice bran oil, hosting triplet-triplet annihilation upconversion active dyes as sensitizer and emitter molecules. The sensitivity of the triplet-triplet annihilation upconversion to the local oxygen concentration was overcome by the oxygen reduction ability of the rice bran oil core. The triplet-triplet annihilation upconversion process could thus successfully be applied at different levels of oxygen presence including at ambient conditions. Using this method, the local temperature within a range of 22 to 40 °C could be determined when the upconversion nanocapsules were taken up by HeLa cells with good cellular viability. Thus, the higher cell temperatures where the cells show enhanced metabolic activity led to a significant increase in the delayed fluorescence spectrum of the upconversion nanocapsules. These findings are promising for further development of novel treatment and diagnostic tools in medicine.

Precious metal-free molecular machines for solar thermal energy storage.

Four benzothiazolium crown ether-containing styryl dyes were prepared through an optimized synthetic procedure. Two of the dyes (4b and 4d) having substituents in the 5-position of the benzothiazole ring are newly synthesized compounds. They demonstrated a higher degree of trans-cis photoisomerization and a longer life time of the higher energy forms in comparison with the known analogs. The chemical structures of all dyes in the series were characterized by NMR, UV-vis, IR spectroscopy and elemental analysis. The steady-state photophysical properties of the dyes were elucidated. The stability constants of metal complexes were determined and are in good agreement with the literature data for reference dyes. The temporal evolution of trans-to-cis isomerization was observed in a real-time regime. The dyes demonstrated a low intrinsic fluorescence of their Ba2+ complexes and high yield of E/Z photoisomerization with lifetimes of the higher energy form longer than 500 seconds. Density functional theory (DFT) calculations at the B3LYP/6-31+G(d,p) level were performed in order to predict the enthalpies (H) of the cis and trans isomers and the storage energies (ΔH) for the systems studied.

Protection of densely populated excited triplet state ensembles against deactivation by molecular oxygen.

This critical review discusses different approaches towards protection of photoactive materials based on triplet excited state ensembles against deactivation by molecular oxygen though quenching and photooxidation mechanisms. Passive protection, based on the application of barrier materials for packaging, sealing, or encapsulation of the active substances, which prevent oxygen molecules from penetration and physical contact with excited states and active protection, based on the application of oxygen scavenging species are compared. Efficiencies of different approaches together with examples and prospects of their applications are outlined.

Halogen-containing thiazole orange analogues - new fluorogenic DNA stains.

Novel asymmetric monomeric monomethine cyanine dyes 5a-d, which are analogues of the commercial dsDNA fluorescence binder thiazole orange (TO), have been synthesized. The synthesis was achieved by using a simple, efficient and environmetally benign synthetic procedure to obtain these cationic dyes in good to excellent yields. Interactions of the new derivatives of TO with dsDNA have been investigated by absorption and fluorescence spectroscopy. The longest wavelength absorption bands in the UV-vis spectra of the target compounds are in the range of 509-519 nm and these are characterized by high molar absorptivities (63000-91480 L·mol-1·cm-1). All investigated dyes from the series are either not fluorescent or their fluorescence is quite low, but they become strongly fluorescent after binding to dsDNA. The influence of the substituents attached to the chromophores was investigated by combination of spectroscopic (UV-vis and fluorescence spectroscopy) and theoretical (DFT and TDDFT calculations) methods.

meso-Tetraphenylporphyrin with a pi-system extended by fusion with anthraquinone.

Fusion with a 9,10-anthraquinone moiety was achieved to extend porphyrin's π-system. A bridged dihydroisoindole derivative was used to prepare the corresponding meso-tetraphenyltetraanthraquinonoporphyrin (Ph4TAQP) via a thermal retro-Diels-Alder reaction. The basic optical properties of the prepared new anthraquinonoporphyrin and its complexes with Zn and Pd were studied.

Synthesis of triplet-triplet annihilation upconversion nanocapsules under protective conditions.

Triplet-triplet annihilation upconversion (TTA-UC) nanocapsules are synthesized under oxygen-protective conditions (i.e., complete darkness and argon atmosphere) by free-radical miniemulsion polymerization. These conditions help to exclude the oxidation of the emitter molecules caused by singlet oxygen, generated during the synthesis at daylight conditions and oxygen-rich environment. Subsequently, keeping all the other experimental conditions the same, samples synthesized at protective conditions demonstrate substantially increased UC efficiency. These experimental facts strongly support the hypothesis that posterior removing of oxygen from TTA-UC nanocapsules is not sufficient to obtain reproducible and sustainable UC results. The schematic representation shows the influence of sunlight on the formation of singlet oxygen and its effect on the triplet-triplet annihilation upconversion process.

Reversible oxygen addition on a triplet sensitizer molecule: protection from excited state depopulation.

We demonstrate that photoactivated oxygen addition to diphenylanthracene moities can be used as a tool for protection of porphyrin's phosphorescence against oxygen quenching. Phosphorescent palladium(II) tetrabenzoporphyrin, covalently linked to four diphenylanthracene moieties, was synthesized and studied. Upon irradiation with ambient light or red laser in solution in air, addition of oxygen and formation of the corresponding endoperoxides were observed. Heating of the irradiated samples afforded the parent porphyrin material.

Hyperbranched unsaturated polyphosphates as a protective matrix for long-term photon upconversion in air.

The energy stored in the triplet states of organic molecules, capable of energy transfer via an emissive process (phosphorescence) or a nonemissive process (triplet-triplet transfer), is actively dissipated in the presence of molecular oxygen. The reason is that photoexcited singlet oxygen is highly reactive, so the photoactive molecules in the system are quickly oxidized. Oxidation leads to further loss of efficiency and various undesirable side effects. In this work we have developed a structurally diverse library of hyperbranched unsaturated poly(phosphoester)s that allow efficient scavenging of singlet oxygen, but do not react with molecular oxygen in the ground state, i.e., triplet state. The triplet-triplet annihilation photon upconversion was chosen as a highly oxygen-sensitive process as proof for a long-term protection against singlet oxygen quenching, with comparable efficiencies of the photon upconversion under ambient conditions as in an oxygen-free environment in several unsaturated polyphosphates. The experimental results are further correlated to NMR spectroscopy and theoretical calculations evidencing the importance of the phosphate center. These results open a technological window toward efficient solar cells but also for sustainable solar upconversion devices, harvesting a broad-band sunlight excitation spectrum.

Aggregation induced nucleic acids recognition by homodimeric asymmetric monomethyne cyanine fluorochromes in mesenchymal stem cells.

In the light of recent retrovirus pandemics, the issue of discovering new and diverse RNA-specific fluorochromes for research and diagnostics became of acute importance. The great majority of nucleic acid-specific probes either do not stain RNA or cannot distinguish between DNA and RNA. The versatility of polymethine dyes makes them suitable as stains for visualization, analysis, and detection of nucleic acids, proteins, and other biomolecules. We synthesized the asymmetric dicationic homodimeric monomethine cyanine dyes 1,1'-(1,3-phenylenebis(methylene))bis(4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)pyridin-1-ium) bromide (Т1) and 1,1'-(1,3-phenylenebis(methylene))bis(4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)quinolin-1-ium) bromide (M1) and tested their binding specificity, spectral characteristics, membrane penetration in living and fixed cells, cellular toxicity, and stability of fluorescent emission. Mesenchymal cells have diverse phenotypes and extensive proliferation and differentiation properties. We found dyes T1 and M1 to show high photochemical stability in living mesenchymal stem cells from apical papilla (SCAP) with a strong fluorescent signal when bound to nucleic acids. We found M1 to perform better than control fluorochrome (Hoechst 33342) for in vivo DNA visualization. T1, on the other hand, stains granular cellular structures resembling ribosomes in living cells and after permeabilization of the nuclear membrane stains the nucleoli and not the chromatin in the nucleus. This makes T1 suitable for the visualization of structures rich in RNA in living and fixed cells.

Tetraaryltetraanthra[2,3]porphyrins: synthesis, structure, and optical properties.

A synthetic route to symmetrical tetraaryltetraanthra[2,3]porphyrins (Ar(4)TAPs) was developed. Ar(4)TAPs bearing various substituents in meso-phenyls and anthracene residues were prepared from the corresponding pyrrolic precursors. The synthesized porphyrins possess high solubility and exhibit remarkably strong absorption bands in the near-infrared region (790-950 nm). The scope of the method, selection of the peripheral substituents, choice of the metal, and their influence on the optical properties are discussed together with the first X-ray crystallographic data for anthraporphyrin.

Tetrathienothiophene Porphyrin as a Metal-Free Sensitizer for Room-Temperature Triplet-Triplet Annihilation Upconversion.

Optically excited triplet states of organic molecules serve as an energy pool for the subsequent processes, either photon energy downhill, such as room temperature phosphorescence, or photon energy uphill process-the triplet-triplet annihilation upconversion (TTA-UC). Manifestation of a high intersystem crossing coefficient is an unavoidable requirement for triplet state formation, following the absorption of a single photon. This requirement is even more inevitable if the excitation light is non-coherent, with moderate intensity and extremely low spectral power density, when compared with the light parameters of 1 Sun (1.5 AM). Coordination of a heavy atom increases substantially the probability of intersystem crossing. Nevertheless, having in mind the global shortage in precious and rare-earth metals, identification of metal-free organic moieties able to form triplet states becomes a prerequisite for environmental friendly optoelectronic technologies. This motivates us to synthesize a metal-free thienothiophene containing porphyrin, based on a condensation reaction between thienothiophene-2-carbaldehyde and pyrrole in an acidic medium by modified synthetic protocol. The upconversion couple tetrathienothiophene porphyrin/rubrene when excited at λ = 658 nm demonstrates bright, delayed fluorescence with a maximum emission at λ = 555 nm. This verifies our hypothesis that the ISC coefficient in thienothiophene porphyrin is efficient in order to create even at room temperature and low-intensity optical excitation densely populated organic triplet ensemble and is suitable for photon energy uphill processes, which makes this type of metal-free sensitizers even more important for optoelectronic applications.

Antibody-Functionalized Carnauba Wax Nanoparticles to Target Breast Cancer Cells.

Development of safer nanomedicines for drug delivery applications requires immense efforts to improve clinical outcomes. Targeting a specific cell, biocompatibility and biodegradability are vital properties of a nanoparticle to fulfill the safety criteria in medical applications. Herein, we fabricate antibody-functionalized carnauba wax nanoparticles encapsulated a hydrophobic drug mimetic, which is potentially interesting for clinical use due to the inert and nontoxic properties of natural waxes. The nanoparticles are synthesized applying miniemulsion methods by solidifying molten wax droplets and further evaporating the solvent from the dispersion. The pH-selective adsorption of antibodies (IgG1, immunoglobulin G1, and CD340, an antihuman HER2 antibody) onto the nanoparticle surface is performed for practical and effective functionalization, which assists to overcome the complexity in chemical modification of carnauba wax. The adsorption behavior of the antibodies is studied using isothermal titration calorimetry (ITC), which gives thermodynamic parameters including the enthalpy, association constant, and stoichiometry of the functionalization process. Both antibodies exhibit strong binding at pH 2.7. The CD340-decorated wax nanoparticles show specific cell interaction toward BT474 breast cancer cells and retain the targeting function even after 6 months of storage period.

How to Minimize Light-Organic Matter Interactions for All-Optical Sub-Cutaneous Temperature Sensing.

Penetration and emanation of light into tissue are limited by the strong interaction of light with the tissue components, especially oxygenated hemoglobin and white adipose tissue. This limits the possibilities for all-optical minimal invasive sensing. In order to minimize the optical losses of light in and out of the tissue, only a narrow optical window between 630 and 900 nm is available. In this work, we realized for the first time all-optical temperature sensing within the narrow optical window for tissue by using the process of triplet-triplet annihilation photon energy upconversion (TTA-UC) as a sensing tool. For this, we apply the asymmetrical benzo-fused BODIPY dye as an optimal emitter and mixed palladium benzo-naphtho-porphyrins as an optimal sensitizer. The TTA-UC sensing system is excited with λ = 658 nm with an extremely low intensity of 1 mW × cm-2 and is factual-protected for a time period longer than 100 s against oxygen-stimulated damage, allowing a stable demonstration of this T-sensing system also in an oxygen-rich environment without losing sensitivity. The sensing dyes we embed in the natural wax/natural matrix, which is intrinsically biocompatible, are approved by the FDA as food additives. The demonstrated temperature sensitivity is higher than ΔT = 200 mK placed around the physiologically relevant temperature of T = 36 °C.

Ceria/polymer nanocontainers for high-performance encapsulation of fluorophores.

We report the synthesis of high-performance organic-inorganic hybrid fluorescent nanocapsules comprising a polymer shell armored with an inorganic layer and a liquid core containing a fluorophore. The polymeric capsules are synthesized by free radical miniemulsion polymerization and contain covalently bound carboxylate surface functionalities that allow for the binding of metal ions through electrostatic interaction. A cerium(IV) oxide nanoparticle layer, formed in situ at the surface of the hybrid nanocapsules, acts as oxygen scavenger and keeps external reactive molecular oxygen from entering into the capsules, eventually resulting in a reduction of the photooxidation of encapsulated fluorescent molecules. This approach shows an increase in the fluorescence of the model organic fluorophore terrylene diimide by avoiding the ground-state molecular oxygen to react with electronically excited states of the fluorescent hydrocarbon molecule.

Thermally stable blue emitting terfluorene block copolymers.

Spectroscopic and morphological studies on a series of rod-coil block copolymers containing terfluorene segments as the rigid blocks and polystyrene as the flexible parts demonstrate an increase in the photoluminescence intensity and the exciton lifetime as well as formation of isolated spheres as thin films upon thermal annealing in air (200 degrees C for 30 min). Moreover, no appearance of the low energy emission band centered at 520 nm was found after the same thermal treatment which permits these copolymers to emit pure blue light.

Interplay between singlet and triplet excited states in a conformationally locked donor-acceptor dyad.

The synthesis and photophysical characterization of a palladium(II) porphyrin - anthracene dyad bridged via short and conformationally rigid bicyclo[2.2.2]octadiene spacer were achieved. A spectroscopic investigation of the prepared molecule in solution has been undertaken to study electronic energy transfer in excited singlet and triplet states between the anthracene and porphyrin units. By using steady-state and time-resolved photoluminescence spectroscopy it was shown that excitation of the singlet excited state of the anthracene leads to energy transfer to the lower-lying singlet state of porphyrin. Alternatively, excitation of the porphyrin followed by intersystem crossing to the triplet state leads to very fast energy transfer to the triplet state of anthracene. The rate of this energy transfer has been determined by transient absorption spectroscopy. Comparative studies of the dynamics of triplet excited states of the dyad and reference palladium octaethylporphyrin (PdOEP) have been performed.

Photon energy upconverting nanopaper: a bioinspired oxygen protection strategy.

The development of solid materials which are able to upconvert optical radiation into photons of higher energy is attractive for many applications such as photocatalytic cells and photovoltaic devices. However, to fully exploit triplet-triplet annihilation photon energy upconversion (TTA-UC), oxygen protection is imperative because molecular oxygen is an ultimate quencher of the photon upconversion process. So far, reported solid TTA-UC materials have focused mainly on elastomeric matrices with low barrier properties because the TTA-UC efficiency generally drops significantly in glassy and semicrystalline matrices. To overcome this limit, for example, combine effective and sustainable annihilation upconversion with exhaustive oxygen protection of dyes, we prepare a sustainable solid-state-like material based on nanocellulose. Inspired by the structural buildup of leaves in Nature, we compartmentalize the dyes in the liquid core of nanocellulose-based capsules which are then further embedded in a cellulose nanofibers (NFC) matrix. Using pristine cellulose nanofibers, a sustainable and environmentally friendly functional nanomaterial with ultrahigh barrier properties is achieved. Also, an ensemble of sensitizers and emitter compounds are encapsulated, which allow harvesting of the energy of the whole deep-red sunlight region. The films demonstrate excellent lifetime in synthetic air (20.5/79.5, O2/N2)-even after 1 h operation, the intensity of the TTA-UC signal decreased only 7.8% for the film with 8.8 µm thick NFC coating. The lifetime can be further modulated by the thickness of the protective NFC coating. For comparison, the lifetime of TTA-UC in liquids exposed to air is on the level of seconds to minutes due to fast oxygen quenching.