Emergent interface vibrational structure of oxide superlattices.

As the length scales of materials decrease, the heterogeneities associated with interfaces become almost as important as the surrounding materials. This has led to extensive studies of emergent electronic and magnetic interface properties in superlattices1-9. However, the interfacial vibrations that affect the phonon-mediated properties, such as thermal conductivity10,11, are measured using macroscopic techniques that lack spatial resolution. Although it is accepted that intrinsic phonons change near boundaries12,13, the physical mechanisms and length scales through which interfacial effects influence materials remain unclear. Here we demonstrate the localized vibrational response of interfaces in strontium titanate-calcium titanate superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy, density functional theory calculations and ultrafast optical spectroscopy. Structurally diffuse interfaces that bridge the bounding materials are observed and this local structure creates phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. Our results provide direct visualization of the progression of the local atomic structure and interface vibrations as they come to determine the vibrational response of an entire superlattice. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behaviour. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids with emergent infrared and thermal responses.

Single-atom vibrational spectroscopy with chemical-bonding sensitivity.

Correlation of lattice vibrational properties with local atomic configurations in materials is essential for elucidating functionalities that involve phonon transport in solids. Recent developments in vibrational spectroscopy in a scanning transmission electron microscope have enabled direct measurements of local phonon modes at defects and interfaces by combining high spatial and energy resolution. However, pushing the ultimate limit of vibrational spectroscopy in a scanning transmission electron microscope to reveal the impact of chemical bonding on local phonon modes requires extreme sensitivity of the experiment at the chemical-bond level. Here we demonstrate that, with improved instrument stability and sensitivity, the specific vibrational signals of the same substitutional impurity and the neighbouring carbon atoms in monolayer graphene with different chemical-bonding configurations are clearly resolved, complementary with density functional theory calculations. The present work opens the door to the direct observation of local phonon modes with chemical-bonding sensitivity, and provides more insights into the defect-induced physics in graphene.

Tunable, Ferroelectricity-Inducing, Spin-Spiral Magnetic Ordering in Monolayer FeOCl.

Spin spirals (SS) are a special case of noncollinear magnetism, where the magnetic-moment direction rotates along an axis. They have generated interest for novel phenomena, spintronics applications, and their potential formation in monolayers, but the search for monolayers exhibiting SS has not been particularly fruitful. Here, we employ density functional theory calculations to demonstrate that SS form in a recently synthesized monolayer, FeOCl. The SS wavelength and stability can be tuned by doping and uniaxial strain. The SS-state band gap is larger by 0.6 eV compared to the gap of both the ferromagnetic and antiferromagnetic state, enabling bandgap tuning and possibly an unusual formation of quantum wells in a single material via magnetic-field manipulation. The SS-induced out-of-plane ferroelectricity enables switching of the SS chirality by an electric field. Finally, forming heterostructures, for example, with graphene or boron nitride, maintains SS ordering and provides another method of modulation and a potential for magnetoelectric devices.

Effects of Ion Energy and Density on the Plasma Etching-Induced Surface Area, Edge Electrical Field, and Multivacancies in MoSe2 Nanosheets for Enhancement of the Hydrogen Evolution Reaction.

Plasma functionalization can increase the efficiency of MoSe2 in the hydrogen evolution reaction (HER) by providing multiple species but the interactions between the plasma and catalyst are not well understood. In this work, the effects of the ion energy and plasma density on the catalytic properties of MoSe2 nanosheets are studied. The through-holes resulting from plasma etching and multi-vacancies induced by plasma-induced damage enhance the HER efficiency as exemplified by a small overpotential of 148 mV at 10 mA cm-2 and Tafel slope of 51.6 mV dec-1 after the plasma treatment using a power of 20 W. The interactions between the plasma and catalyst during etching and vacancies generation are evaluated by plasma simulation. Finite element and first-principles density functional theory calculations are also conducted and the results are consistent with the experimental results, indicating that the improved HER catalytic activity stems from the enhanced electric field and more active sites on the catalyst, and reduced bandgap and adsorption energy arising from the etched through-holes and vacancies, respectively. The results convey new fundamental knowledge about the plasma effects and means to enhance the efficiency of catalysts in water splitting as well insights into the design of high-performance HER catalysts.

Spontaneous Formation of 1D Pattern in Monolayer VSe2 with Dispersive Adsorption of Pt Atoms for HER Catalysis.

Creation of functional patterns in two-dimensional (2D) materials provides opportunities to extend their potential for applications. Transition-metal dichalcogenides (TMDCs) are suitable 2D materials for pattern generation because of properties including alterable polymorphic phases, easy chalcogen-vacancy formation, metal-atom insertion, and alloying. Such patterning can be used for selective functionalization. Here we report the spontaneous formation of long-range, well-ordered 1D patterns in monolayer vanadium diselenide (VSe2) by a single annealing stage during growth. Atomic-resolution images in real space combined with density-functional-theory (DFT) calculations reveal the 1D features of patterned VSe2. Further experimental characterization of the intermediate states in the growth process confirm the spontaneous formation of the 1D pattern by annealing-induced Se-deficient linear defects. The 1D pattern can be reversibly transformed to homogenous VSe2 monolayer by reintroducing Se atoms. Moreover, additional experiments demonstrate that a dispersive deposition of Pt atoms along the 1D structures of patterned VSe2 is achieved, while DFT calculations find that their catalytic activity for hydrogen evolution reaction (HER) is as good as that of Pt surfaces. The formation of long-range, well-ordered 1D patterns not only demonstrates an effective way of dimension modulation in 2D materials but also enriches the potential of intrinsically patterned 2D materials for promising catalytic activities.

Evidence for Ultralow-Energy Vibrations in Large Organic Molecules.

The quantum efficiency or the rate of conversion of incident photon to free electron in photosynthesis is known to be extremely high. It has long been thought that the origin of this efficiency are molecular vibrations leading to a very fast separation of electrons and holes within the involved molecules. However, molecular vibrations are commonly in the range above 100 meV, which is too high for excitations in an ambient environment. Here, we analyze experimental spectra of single organic molecules on metal surfaces at ∼4 K, which often exhibit a pronounced dip. We show that measurements on iron(II) [tetra-(pentafluorophenyl)]porphyrin resolve this single dip at 4 K into a series of step-shaped inelastic excitations at 0.4 K. Via extensive spectral maps under applied magnetic fields and corresponding theoretical analysis we find that the dip is due to ultralow-energy vibrations of the molecular frame, typically in the range below 20 meV. The result indicates that ultralow energy vibrations in organic molecules are much more common than currently thought and may be all-pervasive for molecules above a certain size.

Phonon vortices at heavy impurities in two-dimensional materials.

The advent of monochromated electron energy-loss spectroscopy has enabled atomic-resolution vibrational spectroscopy, which triggered interest in spatially localized or quasi-localized vibrational modes in materials. Here we report the discovery of phonon vortices at heavy impurities in two-dimensional materials. We use density-functional-theory calculations for two configurations of Si impurities in graphene, Si-C3 and Si-C4, to examine atom-projected phonon densities of states and display the atomic-displacement patterns for select modes that are dominated by impurity displacements. The vortices are driven by large displacements of the impurities, and reflect local symmetries. Similar vortices are found at phosphorus impurities in hexagonal boron nitride, suggesting that they may be a feature of heavy impurities in crystalline materials. Phonon vortices at defects are expected to play a role in thermal conductivity and other properties.

Nonequivalent Atomic Vibrations at Interfaces in a Polar Superlattice.

In heterostructures made from polar materials, e.g., AlN-GaN-AlN, the nonequivalence of the two interfaces is long recognized as a critical aspect of their electronic properties; in that, they host different 2D carrier gases. Interfaces play an important role in the vibrational properties of materials, where interface states enhance thermal conductivity and can generate unique infrared-optical activity. The nonequivalence of the corresponding interface atomic vibrations, however, is not investigated so far due to a lack of experimental techniques with both high spatial and high spectral resolution. Herein, the nonequivalence of AlN-(Al0.65Ga0.35)N and (Al0.65Ga0.35)N-AlN interface vibrations is experimentally demonstrated using monochromated electron energy-loss spectroscopy in the scanning transmission electron microscope (STEM-EELS) and density-functional-theory (DFT) calculations are employed to gain insights in the physical origins of observations. It is demonstrated that STEM-EELS possesses sensitivity to the displacement vector of the vibrational modes as well as the frequency, which is as critical to understanding vibrations as polarization in optical spectroscopies. The combination enables direct mapping of the nonequivalent interface phonons between materials with different phonon polarizations. The results demonstrate the capacity to carefully assess the vibrational properties of complex heterostructures where interface states dominate the functional properties.

Direct Visualization of Localized Vibrations at Complex Grain Boundaries.

Grain boundaries (GBs) are a prolific microstructural feature that dominates the functionality of a wide class of materials. The functionality at a GB results from the unique atomic arrangements, different from those in the grain, that have driven extensive experimental and theoretical studies correlating atomic-scale GB structures to macroscopic electronic, infrared optical, and thermal properties. In this work, a SrTiO3 GB is examined using atomic-resolution aberration-corrected scanning transmission electron microscopy and ultrahigh-energy-resolution monochromated electron energy-loss spectroscopy, in conjunction with density functional theory. This combination enables the correlation of the GB structure, nonstoichiometry, and chemical bonding with a redistribution of vibrational states within the GB dislocation cores. The new experimental access to localized GB vibrations provides a direct route to quantifying the impact of individual boundaries on macroscopic properties.

Twisted bilayer zigzag-graphene nanoribbon junctions with tunable edge states.

Stacking two-dimensional layered materials such as graphene and transitional metal dichalcogenides with nonzero interlayer twist angles has recently become attractive because of the emergence of novel physical properties. Stacking of one-dimensional nanomaterials offers the lateral stacking offset as an additional parameter for modulating the resulting material properties. Here, we report that the edge states of twisted bilayer zigzag graphene nanoribbons (TBZGNRs) can be tuned with both the twist angle and the stacking offset. Strong edge state variations in the stacking region are first revealed by density functional theory (DFT) calculations. We construct and characterize twisted bilayer zigzag graphene nanoribbon (TBZGNR) systems on a Au(111) surface using scanning tunneling microscopy. A detailed analysis of three prototypical orthogonal TBZGNR junctions exhibiting different stacking offsets by means of scanning tunneling spectroscopy reveals emergent near-zero-energy states. From a comparison with DFT calculations, we conclude that the emergent edge states originate from the formation of flat bands whose energy and spin degeneracy are highly tunable with the stacking offset. Our work highlights fundamental differences between 2D and 1D twistronics and spurs further investigation of twisted one-dimensional systems.

On-surface synthesis of size- and shape-controlled two-dimensional Aun nanoclusters using a flexible fullerene molecular template.

Synthesizing nano-clusters with a well-defined size, shape, and composition is an important and challenging goal in nanotechnology. Here we report the application of a single layer C60 molecule as an effective molecular template for the synthesis of size- and shape-selected two-dimensional gold clusters (Aun) on a graphite substrate. This molecular template facilitates the preferential formation of Au19 clusters with a selectivity as high as 90%. Density-functional-theory (DFT) calculations found an energy minimum associated with C60-stabilized two-dimensional Au19 clusters.

Direct Visualization of Hydrogen-Transfer Intermediate States by Scanning Tunneling Microscopy.

Hydrogen atoms bonded within molecular cavities often undergo tunneling or thermal-transfer processes that play major roles in diverse physical phenomena. Such transfers may or may not entail intermediate states. The existence of such fleeting states is typically determined by indirect means, while their direct visualization has not been achieved, largely because their concentrations under equilibrium conditions are negligible. Here we use density-functional-theory calculations and scanning-tunneling-microscopy (STM) image simulations to predict that, under specially designed nonequilibrium conditions of voltage-enhanced high transfer rates, the cis-intermediate of the two-hydrogen transfer process in metal-free naphthalocyanine molecules adsorbed on Ag(111) surfaces would be visualizable in a composite image of double-C morphology. As guided by the theoretical predictions, at adjusted scanning temperature and bias, STM experiments achieve a direct visualization of the cis-intermediate. This work demonstrates a practical way to directly visualize elusive intermediates, which enhances understanding of the quantum dynamics of hydrogen atoms.

Atomically precise, custom-design origami graphene nanostructures.

The construction of atomically precise carbon nanostructures holds promise for developing materials for scientific study and nanotechnology applications. Here, we show that graphene origami is an efficient way to convert graphene into atomically precise, complex nanostructures. By scanning tunneling microscope manipulation at low temperature, we repeatedly fold and unfold graphene nanoislands (GNIs) along an arbitrarily chosen direction. A bilayer graphene stack featuring a tunable twist angle and a tubular edge connection between the layers is formed. Folding single-crystal GNIs creates tubular edges with specified chirality and one-dimensional electronic features similar to those of carbon nanotubes, whereas folding bicrystal GNIs creates well-defined intramolecular junctions. Both origami structural models and electronic band structures are computed to complement analysis of the experimental results. The present atomically precise graphene origami provides a platform for constructing carbon nanostructures with engineered quantum properties and, ultimately, quantum machines.

Fabrication of Millimeter-Scale, Single-Crystal One-Third-Hydrogenated Graphene with Anisotropic Electronic Properties.

Periodically hydrogenated graphene is predicted to form new kinds of crystalline 2D materials such as graphane, graphone, and 2D Cx Hy , which exhibit unique electronic properties. Controlled synthesis of periodically hydrogenated graphene is needed for fundamental research and possible electronic applications. Only small patches of such materials have been grown so far, while the experimental fabrication of large-scale, periodically hydrogenated graphene has remained challenging. In the present work, large-scale, periodically hydrogenated graphene is fabricated on Ru(0001). The as-fabricated hydrogenated graphene is highly ordered, with a √3 × âˆš3/R30° period relative to the pristine graphene. As the ratio of hydrogen and carbon is 1:3, the periodically hydrogenated graphene is named "one-third-hydrogenated graphene" (OTHG). The area of OTHG is up to 16 mm2 . Density functional theory calculations demonstrate that the OTHG has two deformed Dirac cones along one high-symmetry direction and a finite energy gap along the other directions at the Fermi energy, indicating strong anisotropic electrical properties. An efficient method is thus provided to produce large-scale crystalline functionalized graphene with specially desired properties.

Identifying and Visualizing the Edge Terminations of Single-Layer MoSe2 Island Epitaxially Grown on Au(111).

Recently, single-layer transition-metal dichalcogenides have drawn significant attention due to their remarkable physical properties in the monolayer as well as at the edges. Here, we constructed high-quality, single-layer MoSe2 islands on the Au(111) surfaces in ultrahigh vacuum by molecular beam epitaxy. All of the islands have hexagonal or triangular shapes with two kinds of well-defined edges. Scanning tunneling spectroscopy (STS) curves show notable differences in positive sample bias for the two types of edges. Density functional theory calculations for several edge configurations of MoSe2 confirm that the STS differences are attributed to the coupling between the pz orbital of Se atoms and the dxz orbital of Mo atoms, and the two types of observed edge terminations are the bare Se edge and selenium-saturated Mo edge.

Construction of Two-Dimensional Chiral Networks through Atomic Bromine on Surfaces.

Using atomic bromine and 2,6-diphenylanthracene (DPA), we successfully constructed and characterized the large-area 2D chiral networks on Ag(111) and Cu(111) surfaces by combining molecular beam epitaxy with scanning tunneling microscopy. The Br atoms distribute themselves periodically in the network with the maximum number of -C-H···Br hydrogen bonds. Density functional theory calculations demonstrate that the hydrogen bonds contribute to the stability of the Br-organic networks. In addition, by controlling the ratio of bromine atoms to DPA molecules, different patterns of Br-organic networks were obtained on Ag(111) surfaces. Further experiments with 2,6-di(4-cyclohexylphenyl)anthracene on Ag(111) produced analogous atomic bromine guided 2D chiral networks.