Solubility and Thermal Stability of Thermotoga maritima MreB.

The basis of MreB research is the study of the MreB protein from the Thermotoga maritima species, since it was the first one whose crystal structure was described. Since MreB proteins from different bacterial species show different polymerisation properties in terms of nucleotide and salt dependence, we conducted our research in this direction. For this, we performed measurements based on tryptophan emission, which were supplemented with temperature-dependent and chemical denaturation experiments. The role of nucleotide binding was studied through the fluorescent analogue TNP-ATP. These experiments show that Thermotoga maritima MreB is stabilised in the presence of low salt buffer and ATP. In the course of our work, we developed a new expression and purification procedure that allows us to obtain a large amount of pure, functional protein.

The p53 and Calcium Regulated Actin Rearrangement in Model Cells.

Long-term cellular stress maintains high intracellular Ca2+ concentrations which ultimately initiates apoptosis. Our interest is focused on how the gelsolin (GSN) and junctional mediating and regulating Y protein (JMY) play important roles in stress response. Both of these proteins can bind p53 and actin. We investigated using in vitro fluorescence spectroscopy and found that the p53 competes with actin in GSN to inhibit p53-JMY complex formation. A high Ca2+ level initializes p53 dimerization; the dimer competes with actin on JMY, which can lead to p53-JMY cotransport into the nucleus. Here we investigated how the motility and division rate of HeLa cells changes due to low-voltage electroporation of GSN or JMY in scratching assays. We revealed that JMY inhibits their motion, but that it can accelerate the cell division. GSN treatment slows down cell division but does not affect cell motility. HeLa cells fully recovered the gap 20 h after the electroporation with JMY and then started to release from the glass slides. Taken together, our in vitro results indicate that GSN and JMY may play an important role in the cellular stress response.

Large-scale purification and in vitro characterization of the assembly of MreB from Leptospira interrogans.

BACKGROUND: Weil's syndrome is caused by Leptospira interrogans infections, a Gram negative bacterium with a distinct thin corkscrew cell shape. The molecular basis for this unusual morphology is unknown. In many bacteria, cell wall synthesis is orchestrated by the actin homolog, MreB. METHODS: Here we have identified the MreB within the L. interrogans genome and expressed the His-tagged protein product of the synthesized gene (Li-MreB) in Escherichia coli. Li-MreB did not purify under standard nucleotide-free conditions used for MreBs from other species, requiring the continual presence of ATP to remain soluble. Covalent modification of Li-MreB free thiols with Alexa488 produced a fluorescent version of Li-MreB. RESULTS: We developed native and denaturing/refolding purification schemes for Li-MreB. The purified product was shown to assemble and disassemble in MgCl2 and KCl dependent manners, as monitored by light scattering and sedimentation studies. The fluorescence spectrum of labeled Li-MreB-Alexa488 showed cation-induced changes in line with an activation process followed by a polymerization phase. The resulting filaments appeared as bundles and sheets under the fluorescence microscope. Finally, since the Li-MreB polymerization was cation dependent, we developed a simple method to measure monovalent cation concentrations within a test case prokaryote, E. coli. CONCLUSIONS: We have identified and initially characterized the cation-dependent polymerization properties of a novel MreB from a non-rod shaped bacterium and developed a method to measure cation concentrations within prokaryotes. GENERAL SIGNIFICANCE: This initial characterization of Li-MreB will enable future structural determination of the MreB filament from this corkscrew-shaped bacterium.

DAAM is required for thin filament formation and Sarcomerogenesis during muscle development in Drosophila.

During muscle development, myosin and actin containing filaments assemble into the highly organized sarcomeric structure critical for muscle function. Although sarcomerogenesis clearly involves the de novo formation of actin filaments, this process remained poorly understood. Here we show that mouse and Drosophila members of the DAAM formin family are sarcomere-associated actin assembly factors enriched at the Z-disc and M-band. Analysis of dDAAM mutants revealed a pivotal role in myofibrillogenesis of larval somatic muscles, indirect flight muscles and the heart. We found that loss of dDAAM function results in multiple defects in sarcomere development including thin and thick filament disorganization, Z-disc and M-band formation, and a near complete absence of the myofibrillar lattice. Collectively, our data suggest that dDAAM is required for the initial assembly of thin filaments, and subsequently it promotes filament elongation by assembling short actin polymers that anneal to the pointed end of the growing filaments, and by antagonizing the capping protein Tropomodulin.

Myosin and tropomyosin stabilize the conformation of formin-nucleated actin filaments.

The conformational elasticity of the actin cytoskeleton is essential for its versatile biological functions. Increasing evidence supports that the interplay between the structural and functional properties of actin filaments is finely regulated by actin-binding proteins; however, the underlying mechanisms and biological consequences are not completely understood. Previous studies showed that the binding of formins to the barbed end induces conformational transitions in actin filaments by making them more flexible through long range allosteric interactions. These conformational changes are accompanied by altered functional properties of the filaments. To get insight into the conformational regulation of formin-nucleated actin structures, in the present work we investigated in detail how binding partners of formin-generated actin structures, myosin and tropomyosin, affect the conformation of the formin-nucleated actin filaments using fluorescence spectroscopic approaches. Time-dependent fluorescence anisotropy and temperature-dependent Förster-type resonance energy transfer measurements revealed that heavy meromyosin, similarly to tropomyosin, restores the formin-induced effects and stabilizes the conformation of actin filaments. The stabilizing effect of heavy meromyosin is cooperative. The kinetic analysis revealed that despite the qualitatively similar effects of heavy meromyosin and tropomyosin on the conformational dynamics of actin filaments the mechanisms of the conformational transition are different for the two proteins. Heavy meromyosin stabilizes the formin-nucleated actin filaments in an apparently single step reaction upon binding, whereas the stabilization by tropomyosin occurs after complex formation. These observations support the idea that actin-binding proteins are key elements of the molecular mechanisms that regulate the conformational and functional diversity of actin filaments in living cells.

Characterization of the biochemical properties and biological function of the formin homology domains of Drosophila DAAM.

We characterized the properties of Drosophila melanogaster DAAM-FH2 and DAAM-FH1-FH2 fragments and their interactions with actin and profilin by using various biophysical methods and in vivo experiments. The results show that although the DAAM-FH2 fragment does not have any conspicuous effect on actin assembly in vivo, in cells expressing the DAAM-FH1-FH2 fragment, a profilin-dependent increase in the formation of actin structures is observed. The trachea-specific expression of DAAM-FH1-FH2 also induces phenotypic effects, leading to the collapse of the tracheal tube and lethality in the larval stages. In vitro, both DAAM fragments catalyze actin nucleation but severely decrease both the elongation and depolymerization rate of the filaments. Profilin acts as a molecular switch in DAAM function. DAAM-FH1-FH2, remaining bound to barbed ends, drives processive assembly of profilin-actin, whereas DAAM-FH2 forms an abortive complex with barbed ends that does not support profilin-actin assembly. Both DAAM fragments also bind to the sides of the actin filaments and induce actin bundling. These observations show that the D. melanogaster DAAM formin represents an extreme class of barbed end regulators gated by profilin.

Intracellular ion concentrations and cation-dependent remodelling of bacterial MreB assemblies.

Here, we measured the concentrations of several ions in cultivated Gram-negative and Gram-positive bacteria, and analyzed their effects on polymer formation by the actin homologue MreB. We measured potassium, sodium, chloride, calcium and magnesium ion concentrations in Leptospira interrogans, Bacillus subtilis and Escherichia coli. Intracellular ionic strength contributed from these ions varied within the 130-273 mM range. The intracellular sodium ion concentration range was between 122 and 296 mM and the potassium ion concentration range was 5 and 38 mM. However, the levels were significantly influenced by extracellular ion levels. L. interrogans, Rickettsia rickettsii and E. coli MreBs were heterologously expressed and purified from E. coli using a novel filtration method to prepare MreB polymers. The structures and stability of Alexa-488 labeled MreB polymers, under varying ionic strength conditions, were investigated by confocal microscopy and MreB polymerization rates were assessed by measuring light scattering. MreB polymerization was fastest in the presence of monovalent cations in the 200-300 mM range. MreB filaments showed high stability in this concentration range and formed large assemblies of tape-like bundles that transformed to extensive sheets at higher ionic strengths. Changing the calcium concentration from 0.2 to 0 mM and then to 2 mM initialized rapid remodelling of MreB polymers.

Author Correction: Intracellular ion concentrations and cation-dependent remodelling of bacterial MreB assemblies.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Down-regulation of canonical and up-regulation of non-canonical Wnt signalling in the carcinogenic process of squamous cell lung carcinoma.

The majority of lung cancers (LC) belong to the non-small cell lung carcinoma (NSCLC) type. The two main NSCLC sub-types, namely adenocarcinoma (AC) and squamous cell carcinoma (SCC), respond differently to therapy. Whereas the link between cigarette smoke and lung cancer risk is well established, the relevance of non-canonical Wnt pathway up-regulation detected in SCC remains poorly understood. The present study was undertaken to investigate further the molecular events in canonical and non-canonical Wnt signalling during SCC development. A total of 20 SCC and AC samples with matched non-cancerous controls were obtained after surgery. TaqMan array analysis confirmed up-regulation of non-canonical Wnt5a and Wnt11 and identified down-regulation of canonical Wnt signalling in SCC samples. The molecular changes were tested in primary small airway epithelial cells (SAEC) and various lung cancer cell lines (e.g. A549, H157, etc). Our studies identified Wnt11 and Wnt5a as regulators of cadherin expression and potentiated relocation of ß-catenin to the nucleus as an important step in decreased cellular adhesion. The presented data identifies additional details in the regulation of SCC that can aid identification of therapeutic drug targets in the future.

The effects of formins on the conformation of subdomain 1 in actin filaments.

In this study we investigated the effects of formins on the conformation of actin filaments by using the method of fluorescence quenching. Actin was labelled with IAEDANS at Cys(374) and the quencher was acrylamide. The results showed that formin binding induced structural changes in the subdomain 1 of actin protomers which were reflected by greater quenching constants (K(SV)). Simultaneously the fraction of the fluorophore population accessible for the quencher (alpha) decreased. These observations suggest that the conformational distribution characteristic for the actin protomers became broader after the binding of formins, for which the structural framework was provided by a more flexible protein matrix in the microenvironment of the label. The effects of formins depended on the formin:actin molar ratio, and also on the ionic strength of the medium. These observations are in agreement with previous results and underline the importance of the intramolecular conformational changes induced by formins in the structure of actin filaments.

Conformational changes in actin filaments induced by formin binding to the barbed end.

Formins bind actin filaments and play an essential role in the regulation of the actin cytoskeleton. In this work we describe details of the formin-induced conformational changes in actin filaments by fluorescence-lifetime and anisotropy-decay experiments. The results show that the binding of the formin homology 2 domain of a mammalian formin (mouse mDia1) to actin filaments resulted in a less rigid protein structure in the microenvironment of the Cys374 of actin, weakening of the interactions between neighboring actin protomers, and greater overall flexibility of the actin filaments. The formin effect is smaller at greater ionic strength. The results show that formin binding to the barbed end of actin filaments is responsible for the increase of flexibility of actin filaments. One formin dimer can affect the dynamic properties of an entire filament. Analyses of the results obtained at various formin/actin concentration ratios indicate that at least 160 actin protomers are affected by the binding of a single formin dimer to the barbed end of a filament.