RESUMO
The synthesis and characterization of two cerium complexes of redox-active amine/amido-phenolate-type ligands are reported. A tripodal framework comprising the tris(2-(3',5'-di-tert-butyl-2'-hydroxyphenyl)amino-phenyl) amine (H6Clamp) proligand was synthesized for comparison of its cerium complex with a potassium-cerium heterobimetallic complex of the 4,6-di-tert-butyl-2-[(2,6-diisopropylphenyl)imino]quinone (dippap) proligand. Structural studies indicate differences in the cerium(III) cation coordination spheres, where CeIII(CH3CN)1.5(H3Clamp) (1-Ce(H3Clamp)) exhibits shorter Ce-O distances and longer Ce-N bond distances compared to the analogous distances in K3(THF)3CeIII(dippap)3 (2-Ce(ap)), due to the gross structural differences between the systems. Differences are also evident in the temperature-dependent magnetic properties, where smaller χT products were observed for 2-Ce(ap) compared to 1-Ce(H3Clamp). Solution electrochemical studies for the complexes were interpreted based on ligand- and metal-based oxidation events, and the cerium(III) oxidation of 2-Ce(ap) was observed to be more facile than that of 1-Ce(H3Clamp), behavior that was cautiously attributed to the rigidity of the encrypted 1-Ce(H3Clamp) complex compared to the heterobimetallic framework of 2-Ce(ap). These results contribute to the understanding of how ligand designs can promote facile redox cycling for cerium complexes of redox-active ligands, given the large contraction of cerium-ligand bonds upon oxidation.
RESUMO
The separation of tellurium from cadmium telluride is examined using a unique combination of mild, anhydrous chlorination and complexation of the subsequent tellurium tetrachloride with 3,5-di-tert-butylcatecholate ligands (dtbc). The resulting tellurium complex, Te(dtbc)2 , is isolated in moderate yield and features a 103 to 104 reduction in cadmium content, as provided by XRF and ICP-MS analysis. Similar results were obtained from zinc telluride. A significant separation between Te, Se, and S was observed after treating a complex mixture of metal chalcogenides with this protocol. These three tunable steps can be applied for future applications of CdTe photovoltaic waste.
RESUMO
A family of thorium complexes featuring the redox-noninnocent pyridinediimine ligand MesPDIMe was synthesized, including (MesPDIMe)ThCl4 (1-Th), (MesPDIMe)ThCl3(THF) (2-Th), (MesPDIMe)ThCl2(THF)2 (3-Th) and [(MesPDIMe)Th(THF)]2 (5-Th) Full characterization of these species shows that these complexes feature MesPDIMe in four different oxidation states. The electronic structures of these complexes have been explored using 1H NMR and electronic absorption spectroscopies, X-ray crystallography, and SQUID magnetometry where appropriate.
RESUMO
Chalcogenide perovskites have garnered interest for applications in semiconductor devices due to their excellent predicted optoelectronic properties and stability. However, high synthesis temperatures have historically made these materials incompatible with the creation of photovoltaic devices. Here, we demonstrate the solution processed synthesis of luminescent BaZrS3 and BaHfS3 chalcogenide perovskite films using single-phase molecular precursors at sulfurization temperatures of 575 °C and sulfurization times as short as one hour. These molecular precursor inks were synthesized using known carbon disulfide insertion chemistry to create Group 4 metal dithiocarbamates, and this chemistry was extended to create species, such as barium dithiocarboxylates, that have never been reported before. These findings, with added future research, have the potential to yield fully solution processed thin films of chalcogenide perovskites for various optoelectronic applications.
RESUMO
Chalcogenide perovskites, including BaZrS3, have been suggested as highly stable alternatives to halide perovskites. However, the synthesis of chalcogenide perovskites has proven to be a significant challenge, often relying on excessively high temperatures and methods that are incompatible with device integration. In this study, we developed a solution-based approach to the deposition of BaZrS3. This method utilizes a combination of a soluble barium thiolate and nanoparticulate zirconium hydride. Following solution-based deposition of the precursors and subsequent sulfurization, BaZrS3 can be obtained at temperatures as low as 500 °C. Furthermore, this method was extended to other chalcogenide perovskite (BaHfS3) and perovskite-related (BaTiS3) materials.
RESUMO
The first non-uranyl, f-element oxo complex synthesized from dioxygen in dry air is presented in this work. The synthesis was accomplished by treating the redox-active thorium amidophenolate complex, [Th(dippap)3][K(15-c-5)2]2 (1-ap crown), with dioxygen in dry air, forming a rare terminal thorium oxo, [OâTh(dippisq)2(dippap)][K(15-c-5)2]2 (2-oxo). Compound 1-ap crown was regenerated by treating 2-oxo with potassium graphite. X-ray crystallography of 2-oxo revealed a comparatively longer bond length for the thorium-oxygen double bond when compared to other thorium oxos. As such, several thorium-oxygen single bonds were synthesized for comparison, including Th(dippisq)2(OSiMe3)2(THF) (4-OSiMe3), Th(OSiMe3)4(bipy)2 (5-OSiMe3), and [Th(OH)2 (dippHap)4][K(15-c-5)2]2 (6-OH). Full spectroscopic and structural characterization of the complexes was performed via 1H NMR spectroscopy, X-ray crystallography, EPR spectroscopy, and electronic absorption spectroscopy as well as SQUID magnetometry, which all confirmed the electronic structure of these complexes.
Assuntos
Grafite , Tório , Ligantes , Oxirredução , Oxigênio/química , Pentamidina/análogos & derivados , Potássio , Tório/químicaRESUMO
Two Np(III) halides, NpI3 (THF)4 and NpBr3 (THF)4 , have been prepared and isolated in high yields as described in this work. Starting with neptunia (NpO2 ), NpCl4 (DME)2 was first generated in an updated, higher yielding synthesis than what was previously reported by using HCl/HF. This material was then reduced with KC8 , followed by subsequent ligand exchange, to generate NpBr3 (THF)4 and NpI3 -(THF)4 . Full characterization by single-crystal X-ray crystallography, 1 H NMR spectroscopy and electronic absorption spectroscopy confirmed the molecular formulas and oxidation states. These trivalent materials are straightforward to synthesize and can be used as starting materials for non-aqueous Np(III) chemistry, obviating the need for rare and restricted Np metal and elemental halogens.
RESUMO
A series of thorium(IV) complexes featuring the redox-active 4,6-di-tert-butyl-N-(2,6-di-isopropylphenyl)-o-iminobenzoquinone (dippiq) ligand family have been synthesized and characterized. The neutral iminoquinone ligand was used to generate Th(dippiq)Cl4(dme)2 (1-iq) and Th(dippiq)2Cl4 (2-iq), both of which show dative bonds between the thorium(IV) ion and the ligands. One electron reduction of the ligand forms the unique tris(iminosemiquinone) complex, Th(dippisq)3Cl (3-isq), which features a radical in each ligand. Further reduction furnishes the amidophenolate species, Th(dippap)3]K2(THF)2 (4-ap), which has the ligands in their dianionic form. Attempts to sequester the potassium ions with cryptand resulted in the [Th(dippap)3K][K(crypt)] (4-ap mono crypt) and [Th(dippap)3][K(crypt)]2 (4-ap crypt) species. A bis(amidophenolate) complex was accessed by incorporating bulky triphenylphosphine oxide (OPPh3) ligands to generate Th(dippap)2(OPPh)3 (5-ap). Spectroscopic and structural characterization of each derivative established the +4 oxidation state for thorium with redox chemistry occurring at the ligands rather than the thorium ion. The reported 3-isq complex is unprecedented as it is the first tri(radical) thorium complex with the highest reported magnetic moment for a thorium species as characterized by SQUID magnetometry.
RESUMO
Tellurium catecholate complexes were investigated to probe the redox chemistry of tellurium, whose oxidation state can span from -2 to +6. Treating TeO2 with catechols resulted in tellurium coordination complexes in high yields within minutes to hours at room temperature or with extended heating, depending on the ligand substituents, giving Te(IV) complexes of the form Te(C)2, where C = 3,5-di-tert-butylcatecholate, o-catecholate, or tetrachlorocatecholate. The redox behavior of these complexes was investigated through addition of organic oxidants, giving nearly quantitative adducts of pyridine N-oxide or N-methylmorpholine N-oxide with each tellurium complex, the latter set leading to ligand oxidation upon heating. Each compound was characterized crystallographically and computationally, providing data consistent with a mostly electrostatic interaction and very little covalent character between the N-oxide and Te complex. The Te N-oxide bond orders are consistently lower than those with the catechol derivatives, as characterized with the Mayer, Gopinathan-Jug (G-J), and first Nalewajski-Mrozek (N-M1) bond indices. The tellurium lone pair is energetically buried by 1.93-2.81 eV, correlating with the observation that the ligands are more reactive than the tellurium center toward oxidation. This combined experimental and theoretical study finds structure-property relationships between ligand design and reactivity that will aid in future efforts for the recovery of tellurium.
RESUMO
Using a redox-active dioxophenoxazine ligand, DOPO (DOPO = 2,4,6,8-tetra-tert-butyl-1-oxo-1H-phenoxazine-9-olate), a family of actinide (U, Th, Np, and Pu) and Hf tris(ligand) coordination compounds was synthesized. The full characterization of these species using 1H NMR spectroscopy, electronic absorption spectroscopy, SQUID magnetometry, and X-ray crystallography showed that these compounds are analogous and exist in the form M(DOPOq)2(DOPOsq), where two ligands are of the oxidized quinone form (DOPOq) and the third is of the reduced semiquinone (DOPOsq) form. The electronic structures of these complexes were further investigated using CASSCF calculations, which revealed electronic structures consistent with metals in the +4 formal oxidation state and one unpaired electron localized on one ligand in each complex. Furthermore, f orbitals of the early actinides show a sizable bonding overlap with the ligand 2p orbitals. Notably, this is the first example of a plutonium-ligand radical species and a rare example of magnetic data being recorded for a homogeneous plutonium coordination complex.
RESUMO
Well-characterized complexes of transplutonium elements are scarce because of the experimental challenges of working with these elements and the rarity of the isotopes. This leads to a lack of structural and spectroscopic data needed to understand the nature of chemical bonds in these compounds. In this work, the synthesis of Cf(DOPOq )2 (NO3 )(py) (DOPOq =2,4,6,8-tetra-tert-butyl-1-oxo-1H-phenoxazin-9-olate; py=pyridine) is reported, in which the nitrate anion is hypothesized to form through the α-radiolysis-induced reaction of pyridine and/or the ligand. Computational analysis of the electronic structure of the complex reveals that the CfIII -ligand interactions are largely ionic.
RESUMO
The activation of U-N multiple bonds in an imido analogue of the uranyl ion is accomplished by using a system that is very electron-rich with sterically encumbering ligands. Treating the uranium(VI) trans-bis(imido) UI2(NDIPP)2(THF)3 (DIPP = 2,6-diisopropylphenyl and THF = tetrahydrofuran) with tert-butyl(dimethylsilyl)amide (NTSA) results in a reduction and rearrangement to form the uranium(IV) cis-bis(imido) [U(NDIPP)2(NTSA)2]K2 (1). Compound 1 features long U-N bonds, pointing toward substantial activation of the NâUâN unit, as determined by X-ray crystallography and 1H NMR, IR, and electronic absorption spectroscopies. Computational analyses show that uranium(IV)-imido bonds in 1 are significantly weakened multiple bonds due to polarization toward antibonding and nonbonding orbitals. Such geometric control has important effects on the electronic structures of these species, which could be useful in the recycling of spent nuclear fuels.
RESUMO
Two uranium(III) anilido complexes were synthesized, Tp*2U(NH-C6H4-p-terpyridine) (2-terpy) and Tp*2U(NH-C6H4-p-CH3) (2-ptol), where Tp* = hydrotris(3,5-dimethylpyrazolyl)borate, by protonation of Tp*2UBn (1-Bn; Bn = benzyl) with 4-[2,6-di(pyridin-2-yl)pyridin-4-yl]benzenamine or p-toluidine, respectively. Conversion to the respective uranium(IV) imido species was possible by oxidation and deprotonation, forming Tp*2U(N-C6H4-p-terpyridine) (3-terpy) and Tp*2U(N-C6H4-p-CH3) (3-ptol). These compounds were characterized by multinuclear NMR spectroscopy, IR spectroscopy, electronic absorption spectroscopy, and X-ray crystallography.
RESUMO
A series of uranyl compounds with the redox-active iminoquinone ligand have been synthesized, and their electronic structures elucidated using multinuclear NMR, EPR, electronic absorption spectroscopies, SQUID magnetometry, and X-ray crystallography. Characterization and analysis of the iminoquinone (iq0) complex, (dippiq)UO2(OTf)2THF (1-iq), the iminosemiquinone (isq1-) complex, (dippisq)2UO2THF (2-isq), and the amidophenolate (ap2-) complex, [(dippap)2UO2THF][K(18-crown-6)(THF)2]2(3-ap crown) show that reduction events are ligand-based, with the uranium center remaining in the hexavalent state. Reactivity of 2-isq with B-chlorocatecholborane or pivaloyl chloride leads to U-Ouranyl bond scission and reduction of U(VI) to U(IV) concomitant with ligand oxidation along with organic byproducts. 18O isotopic labeling experiments along with IR spectroscopy, mass spectrometry, and multinuclear NMR spectroscopy confirm that the organic byproducts contain oxygen atoms which originate from U-Ouranyl bond activation.
RESUMO
An isostructural family of f-element compounds (Ce, Nd, Sm, Gd; Am, Bk, Cf) of the redox-active dioxophenoxazine ligand (DOPOq; DOPO = 2,4,6,8-tetra- tert-butyl-1-oxo-1 H-phenoxazin-9-olate) was prepared. This family, of the form M(DOPOq)3, represents the first nonaqueous isostructural series, including the later actinides berkelium and californium. The lanthanide derivatives were fully characterized using 1H NMR spectroscopy and SQUID magnetometry, while all species were structurally characterized by X-ray crystallography and electronic absorption spectroscopy. In order to probe the electronic structure of this new family, CASSCF calculations were performed and revealed these systems to be largely ionic in contrast to previous studies, where berkelium and californium typically have a small degree of covalent character. To validate the zeroth order regular approximation (ZORA) method, the same CASSCF analysis using experimental structures versus UDFT-ZORA optimized structures does not exhibit sizable changes in bonding patterns. This shows that UDFT-ZORA combined with CASSCF could be a useful first approximation to predict and investigate the structure and electronic properties of actinides and lanthanides that are difficult to synthesize or characterize.
RESUMO
The continued development of redox-active ligands requires an understanding as to how ligand modifications and related factors affect the locus of redox activity and spin density in metal complexes. Here we describe the synthesis, characterization, and electronic structure of nickel complexes containing triaryl NNNN (1) and SNNS (2) ligands derived from o-phenylenediamine. The tetradentate ligands in 1 and 2 were investigated and compared to those in metal complexes with compositionally similar ligands to determine how ligand-centered redox properties change when redox-active flanking groups are replaced with redox-innocent NMe2 or SMe. A derivative of 2 in which the phenylene backbone was replaced with ethylene (3) was also prepared to interrogate the importance of o-phenylenediamine for ligand-centered redox activity. Cyclic voltammograms collected for 1 and 2 revealed two fully reversible ligand-centered redox events. Remarkably, several quasi-reversible ligand-centered redox waves were also observed for 3 despite the absence of the o-phenylenediamine subunit. Oxidizing 1 and 2 with silver salts containing different counteranions (BF4-, OTf-, NTf2-) allowed the electrochemically generated complexes to be analyzed as a function of different oxidation states using single-crystal X-ray diffraction (XRD), EPR spectroscopy, and S K-edge X-ray absorption spectroscopy. The experimental data are corroborated by DFT calculations, and together, they reveal how the location of unpaired spin density and electronic structure in singly and doubly oxidized salts of 1 and 2 varies depending on the coordinating ability of the counteranions and exogenous ligands such as pyridine.
RESUMO
Uranium mono(imido) species have been prepared via the oxidation of Cp*U(MesPDIMe)(THF) (1-Cp*) and [CpPU(MesPDIMe)]2 (1-CpP), where Cp* = η5-1,2,3,4,5-pentamethylcyclopentadienide, CpP = 1-(7,7-dimethylbenzyl)cyclopentadienide, MesPDIMe = 2,6-[(Mes)NâCMe]2C5H3N, and Mes = 2,4,6-trimethylphenyl, with organoazides. Treating either with N3DIPP (DIPP = 2,6-diisopropylphenyl) formed uranium(IV) mono(imido) complexes, CpPU(NDIPP)(MesPDIMe) (2-CpP) and Cp*U(NDIPP)(MesPDIMe) (2-Cp*), featuring reduced [MesPDIMe]-. The addition of electron-donating 1-azidoadamantane (N3Ad) to 1-Cp* generated a dimeric product, [Cp*U(NAd)(MesHPDIMe)]2 (3), from radical coupling at the p-pyridine position of the pyridine(diimine) ligand and H-atom abstraction, formed through a monomeric intermediate that was observed in solution but could not be isolated. To support this, Cp*U(tBu-MesPDIMe)(THF) (1-tBu), which has a tert-butyl group protecting the para position, was also treated with N3Ad, and the monomeric product, Cp*U(NAd)(tBu-MesPDIMe) (2-tBu), was isolated. All isolated complexes were analyzed spectroscopically and structurally, and the dynamic solution behavior was examined using electronic absorption spectroscopy.
RESUMO
New uranyl derivatives featuring the amide ligand, -N(SiHMe2) tBu, were synthesized and characterized by X-ray crystallography, multinuclear NMR spectroscopy, and absorption spectroscopies. Steric properties of these complexes were also quantified using the computational program Solid-G. The increased basicity of the free ligand -N(SiHMe2) tBu was demonstrated by direct comparison to -N(SiMe3)2, a popular supporting ligand for uranyl. Substitutional lability on a uranyl center was also demonstrated by exchange with the -N(SiMe3)2 ligand. The increased basicity of this ligand and diverse characterization handles discussed here will make these compounds useful synthons for future reactivity.
RESUMO
Uranium complexes (MesDAE)2U(THF) (1-DAE) and Cp2U(MesDAE) (2-DAE) (MesDAE = [ArN-CH2CH2-NAr]; Ar = 2,4,6-trimethylphenyl (Mes)), bearing redox-innocent diamide ligands, have been synthesized and characterized for a full comparison with previously published, redox-active diimine complexes, (MesDABMe)2U(THF) (1-DAB) and Cp2U(MesDABMe) (2-DAB) (MesDABMe = [ArNâC(Me)C(Me)âNAr]; Ar = Mes). These redox-innocent analogues maintain an analogous steric environment to their redox-active ligand counterparts to facilitate a study aimed at determining the differing electronic behavior around the uranium center. Structural analysis by X-ray crystallography showed 1-DAE and 2-DAE have a structural environment very similar to 1-DAB and 2-DAB, respectively. The main difference occurs with coordination of the ene-backbone to the uranium center in the latter species. Electronic absorption spectroscopy reveals these new DAE complexes are nearly identical to each other. X-ray absorption spectroscopy suggests all four species contain +4 uranium ions. The data also indicates that there is an electronic difference between the bis(diamide)-THF uranium complexes as opposed to those that only contain one diamide and two cyclopentadienyl rings. Finally, magnetic measurements reveal that all complexes display temperature-dependent behavior consistent with uranium(IV) ions that do not include ligand radicals. Overall, this study determines that there is no significant bonding difference between the redox-innocent and redox-active ligand frameworks on uranium. Furthermore, there are no data to suggest covalent bonding character using the latter ligand framework on uranium, despite what is known for transition metals.