RESUMO
A mino acids are the essential building blocks for collagen and proteoglycan, which are the main constituents for cartilage extracellular matrix (ECM). Synthesis of ECM proteins requires the uptake of various essential/nonessential amino acids. Analyzing amino acid metabolism during chondrogenesis can help to relate tissue quality to amino acid metabolism under different conditions. In our study, we studied amino acid uptake/secretion using human mesenchymal stem cell (hMSC)-based aggregate chondrogenesis in a serum-free induction medium with a defined chemical formulation. The initial glucose level and medium-change frequency were varied. Our results showed that essential amino acid uptake increased with time during hMSCs chondrogenesis for all initial glucose levels and medium-change frequencies. Essential amino acid uptake rates were initial glucose-level independent. The DNA-normalized glycosaminoglycans and hydroxyproline content of chondrogenic aggregates correlated with cumulative uptake of leucine, valine, and tryptophan regardless of initial glucose levels and medium-change frequencies. Collectively, our results show that amino acid uptake rates during in vitro chondrogenesis were insufficient to produce a tissue with an ECM content similar to that of human neonatal cartilage or adult cartilage. Furthermore, this deficiency was likely related to the downregulation of some key amino acid transporters in the cells. Such deficiency could be partially improved by increasing the amino acid availability in the chondrogenic medium by changing culture conditions.
RESUMO
The ability to maintain functional hepatocytes has important implications for bioartificial liver development, cell-based therapies, drug screening, and tissue engineering. Several approaches can be used to restore hepatocyte function in vitro, including coating a culture substrate with extracellular matrix (ECM), encapsulating cells within biomimetic gels (Collagen- or Matrigel-based), or co-cultivation with other cells. This paper describes the use of bioactive heparin-based core-shell microcapsules to form and cultivate hepatocyte spheroids. These microcapsules are comprised of an aqueous core that facilitates hepatocyte aggregation into spheroids and a heparin hydrogel shell that binds and releases growth factors. We demonstrate that bioactive microcapsules retain and release endogenous signals thus enhancing the function of encapsulated hepatocytes. We also demonstrate that hepatic function may be further enhanced by loading exogenous hepatocyte growth factor (HGF) into microcapsules and inhibiting transforming growth factor (TGF)-ß1 signaling. Overall, bioactive microcapsules described here represent a promising new strategy for the encapsulation and maintenance of primary hepatocytes and will be beneficial for liver tissue engineering, regenerative medicine, and drug testing applications.
RESUMO
Nanodiamond (ND) with nitrogen vacancy (NV-) color centers has emerged as an important material for quantum sensing and imaging. Fluorescent, carboxylated ND (140 nm) is investigated for the detection of dopamine (DA), caffeine (CA), and ascorbic acid (AA). Over a 200 nM range, DA and CA quenched the ND fluorescence by 7.1 and 9.8%, respectively. For AA, fluorescence was quenched (2.9%) at nM concentrations and enhanced at µM concentrations. The quenching fit well to Langmuir adsorption isotherms. For DA-CA mixtures, the CA at nM concentrations did not affect DA quenching but interfered when at µM concentrations. The DA at nM or µM concentrations lessened CA quenching. For DA-AA mixtures with DA at mM concentrations, AA quenched fluorescence throughout the nM and µM range, with increased quenching in the nM range. These studies support ND fluorescence modulation as a possible sensor modality for bioanalyte detection.
RESUMO
Human pluripotent stem cells (hPSC) hold considerable promise as a source of adult cells for treatment of diseases ranging from diabetes to liver failure. Some of the challenges that limit the clinical/translational impact of hPSCs are high cost and difficulty in scaling-up of existing differentiation protocols. In this paper, we sought to address these challenges through the development of bioactive microcapsules. A co-axial flow focusing microfluidic device was used to encapsulate hPSCs in microcapsules comprised of an aqueous core and a hydrogel shell. Importantly, the shell contained heparin moieties for growth factor (GF) binding and release. The aqueous core enabled rapid aggregation of hPSCs into 3D spheroids while the bioactive hydrogel shell was used to load inductive cues driving pluripotency maintenance and endodermal differentiation. Specifically, we demonstrated that one-time, 1 h long loading of pluripotency signals, fibroblast growth factor (FGF)-2 and transforming growth factor (TGF)-ß1, into bioactive microcapsules was sufficient to induce and maintain pluripotency of hPSCs over the course of 5 days at levels similar to or better than a standard protocol with soluble GFs. Furthermore, stem cell-carrying microcapsules that previously contained pluripotency signals could be reloaded with an endodermal cue, Nodal, resulting in higher levels of endodermal markers compared to stem cells differentiated in a standard protocol. Overall, bioactive heparin-containing core-shell microcapsules decreased GF usage five-fold while improving stem cell phenotype and are well suited for 3D cultivation of hPSCs.
RESUMO
Human pluripotent stem cells (hPSCs) may be differentiated into any adult cell type and therefore hold incredible promise for cell therapeutics and disease modeling. There is increasing interest in three-dimensional (3D) hPSC culture because of improved differentiation outcomes and potential for scale up. Our team has recently described bioactive heparin (Hep)-containing core-shell microcapsules that promote rapid aggregation of stem cells into spheroids and may also be loaded with growth factors for the local and sustained delivery to the encapsulated cells. In this study, we explored the possibility of further modulating bioactivity of microcapsules through the use of an ultrathin coating composed of tannic acid (TA). Deposition of the TA film onto model substrates functionalized with Hep and poly(ethylene glycol) was characterized by ellipsometry and atomic force microscopy. Furthermore, the presence of the TA coating was observed to increase the amount of basic fibroblast growth factor (bFGF) incorporation by up to twofold and to extend its release from 5 to 7 days. Most significantly, TA-microcapsules loaded with bFGF induced higher levels of pluripotency expression compared to uncoated microcapsules containing bFGF. Engineered microcapsules described here represent a new stem cell culture approach that enables 3D cultivation and relies on local delivery of inductive cues.
RESUMO
In the recent past, remarkable advances in nanotechnology have generated nanoparticles of different shapes and sizes, which have been shown to exhibit unique properties suitable for biomedical applications such as cancer therapy and imaging. Obviously, all nanoparticles are not made equal. This becomes evident when we consider their transport behavior under blood flow in microcirculation. In this work, we evaluated the effect of critical physical characteristics such as the particle shape, size and density on a nanoparticle's tendency to marginate towards the vessel walls in microcirculation using an in vitro model. The wall deposition of nanoparticles was tested in a fibronectin-coated microfluidic channel at a physiologically relevant flow rate. Different classes of nanoparticles (liposome, metal particles) of different sizes (60-130 nm), densities (1-19 g ml(-1)) and shapes (sphere, rod) displayed significantly different deposition as a result of different margination rates. The smaller-sized and the oblate-shaped particles displayed a favorable behavior as indicated by their higher margination rates. Notably, the particle density showed an even more essential role, as it was observed that the lighter particles marginated significantly more. Since nanoparticles must escape the flow in order to approach the vascular bed and subsequently extravascular components for meaningful interactions, the design of nanoparticles strongly affects their margination, a key factor for their ultimate in vivo effectiveness.
Assuntos
Lipossomos/química , Técnicas Analíticas Microfluídicas/instrumentação , Nanopartículas/química , Desenho de Equipamento , Microcirculação , Tamanho da PartículaRESUMO
Understanding in vitro chondrogenesis of human mesenchymal stem cells (hMSCs) is important as it holds great promise for cartilage tissue engineering and other applications. The current technology produces the end tissue quality that is highly variable and dependent on culture conditions. We investigated the effect of nutrient availability on hMSC chondrogenesis in a static aggregate culture system by varying the medium-change frequency together with starting glucose levels. Glucose uptake and lactate secretion profiles were obtained to monitor the metabolism change during hMSC chondrogenesis with different culture conditions. Higher medium-change frequency led to increases in cumulative glucose uptake for all starting glucose levels. Furthermore, increase in glucose uptake by aggregates led to increased end tissue glycosaminoglycan (GAG) and hydroxyproline (HYP) content. The results suggest that increased glucose availability either through increased medium-change frequency or higher initial glucose levels lead to improved chondrogenesis. Also, cumulative glucose uptake and lactate secretion were found to correlate well with GAG and HYP content, indicating both molecules are promising biomarkers for noninvasive assessment of hMSC chondrogenesis. Collectively, our results can be used to design optimal culture conditions and develop dynamic assessment strategies for cartilage tissue engineering applications. Impact statement In this study, we investigated how culture conditions, medium-change frequency and glucose levels, affect chondrogenesis of human mesenchymal stem cells in an aggregate culture model. Doubling the medium-change frequency significantly increased the biochemical quality of the resultant tissue aggregates, as measured by their glycosaminoglycan and hydroxyproline content. We attribute this to increased glucose uptake through the glycolysis pathway, as secretion of lactate, a key endpoint product of the glycolysis pathway, increased concurrently. These findings can be used to design optimal culture conditions for tissue engineering and regenerative medicine applications.
Assuntos
Condrogênese , Glucose , Matriz Extracelular , HumanosRESUMO
A technique to fabricate hollow fibers with porous walls via templating from high internal phase emulsions (HIPEs) has been demonstrated. This technique provides an environmentally friendly process alternative to conventional methods for hollow-fiber productions that typically use organic solvents. HIPEs containing acrylate monomers were extruded into an aqueous curing bath. Osmotic pressure effects, manipulated through differences in salt concentration between the curing bath and the aqueous phase within the HIPE were used to control the hollow structures of polyHIPE fibers. The technique was used to produce porous fibers (with millimeter-scale diameters and micronscale pores) having a hollow core (with a diameter of 50%-75% of the fiber diameter). Two potential applications of the hollow fibers were demonstrated. In vitro drug release studies using these hollow fibers show a controlled release profile that is consistent with the microstructure of the porous fiber wall. In addition, the presence of pores in the walls of polyHIPE fibers also enable size-selective loading and separation of functional materials from an external suspension.
RESUMO
Cellular therapies based on human pluripotent stem cells (hPSCs) offer considerable promise for treating numerous diseases including diabetes and end stage liver failure. Stem cell spheroids may be cultured in stirred bioreactors to scale up cell production to cell numbers relevant for use in humans. Despite significant progress in bioreactor culture of stem cells, areas for improvement remain. In this study, we demonstrate that microfluidic encapsulation of hPSCs and formation of spheroids. A co-axial droplet microfluidic device was used to fabricate 400 µm diameter capsules with a poly(ethylene glycol) hydrogel shell and an aqueous core. Spheroid formation was demonstrated for three hPSC lines to highlight broad utility of this encapsulation technology. In-capsule differentiation of stem cell spheroids into pancreatic ß-cells in suspension culture was also demonstrated.
Assuntos
Técnicas de Cultura de Células/métodos , Células-Tronco Pluripotentes/fisiologia , Esferoides Celulares/fisiologia , Reatores Biológicos , Cápsulas/química , Técnicas de Cultura de Células/instrumentação , Diferenciação Celular , Linhagem Celular , Sobrevivência Celular , Transplante de Células/métodos , Diabetes Mellitus/terapia , Doença Hepática Terminal/terapia , Humanos , Hidrogéis/química , Células Secretoras de Insulina/fisiologia , Técnicas Analíticas Microfluídicas/instrumentação , Células-Tronco Pluripotentes/transplante , Polietilenoglicóis/químicaRESUMO
To study the roles of nonmuscle myosin II (NM-II) during invasive cell migration, microfluidic migration chambers have been designed and fabricated using photo- and soft-lithography microfabrication techniques. The chamber consists of two channels separated by a vertical barrier with multiple bays of pores with widths varying from 6 microm to 16 microm, and lengths varying from 25 microm to 50 microm. The cells are plated in the channel on one side of the barrier while a chemoattractant is flowed through the channel on the other side of the barrier. In these chambers, cells can be observed with transmitted light or fluorescence optics while they chemotax through various sized pores that impose differential mechanical resistance to transmigration. As an initial test of this device, we compared breast-cancer cell chemotactic transmigration through different pore sizes with and without inhibition of NM-II. Two distinct rates were observed as cells attempted to pull their nucleus through the smaller pores, and the faster nuclear transit mode was critically dependent on NM-II motor activity. The ability to monitor cells as they chemotax through pores of different dimensions within a single experimental system provides novel information on how pore size affects cell morphology and migration rate, providing a dramatic improvement of imaging potential relative to other in vitro transmigration systems such as Boyden chambers.
Assuntos
Neoplasias da Mama/patologia , Neoplasias da Mama/fisiopatologia , Quimiotaxia , Citometria de Fluxo/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Microscopia/instrumentação , Miosina Tipo II/metabolismo , Técnicas de Cultura de Células/instrumentação , Linhagem Celular Tumoral , Separação Celular/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Análise de Injeção de Fluxo/instrumentação , HumanosRESUMO
Large doses of chemical pesticides are required to achieve effective concentrations in the rhizosphere, which results in the accumulation of harmful residues. Precision farming is needed to improve the efficacy of pesticides, but also to avoid environmental pollution, and slow-release formulations based on nanoparticles offer one solution. Here, we tested the mobility of synthetic and virus-based model nanopesticides by combining soil column experiments with computational modelling. We found that the tobacco mild green mosaic virus and cowpea mosaic virus penetrate soil to a depth of at least 30 cm, and could therefore deliver nematicides to the rhizosphere, whereas the Physalis mosaic virus remains in the first 4 cm of soil and would be more useful for the delivery of herbicides. Our experiments confirm that plant viruses are superior to synthetic mesoporous silica nanoparticles and poly(lactic-co-glycolic acid) for the delivery and controlled release of pesticides, and could be developed as the next generation of pesticide delivery systems.
Assuntos
Agricultura/métodos , Preparações de Ação Retardada/metabolismo , Vírus do Mosaico/metabolismo , Praguicidas/metabolismo , Microbiologia do Solo , Comovirus/metabolismo , Nanopartículas/metabolismo , Solo/química , Vírus do Mosaico do Tabaco/metabolismo , Tymovirus/metabolismoRESUMO
Human mesenchymal stem cell (hMSC)-based chondrogenesis is a key process used to develop tissue engineered cartilage constructs from stem cells, but the resulting constructs have inferior biochemical and biomechanical properties compared to native articular cartilage. Transforming growth factor ß containing medium is commonly applied to cell layers of hMSCs, which aggregate upon centrifugation to form 3-D constructs. The aggregation process leads to a high cell density condition, which can cause nutrient limitations during long-term culture and, subsequently, inferior quality of tissue engineered constructs. Our objective is to modulate the aggregation process by targeting RhoA/ROCK signaling pathway, the chief modulator of actomyosin contractility, to enhance the end quality of the engineered constructs. Through ROCK inhibition, repression of cytoskeletal tension in chondrogenic hMSCs was achieved along with less dense aggregates with enhanced transport properties. ROCK inhibition also led to significantly increased cartilaginous extracellular matrix accumulation. These findings can be used to create an improved microenvironment for hMSC-derived tissue engineered cartilage culture. We expect that these findings will ultimately lead to improved cartilaginous tissue development from hMSCs.
Assuntos
Cartilagem/enzimologia , Condrogênese , Matriz Extracelular/metabolismo , Células-Tronco Mesenquimais/enzimologia , Transdução de Sinais , Quinases Associadas a rho/antagonistas & inibidores , Transporte Biológico Ativo , Cartilagem/citologia , Células Cultivadas , Citoesqueleto/metabolismo , Humanos , Células-Tronco Mesenquimais/citologia , Engenharia Tecidual , Quinases Associadas a rho/metabolismoRESUMO
Chondrogenesis of human mesenchymal stem cells (hMSCs) is an important biological process in many applications including cartilage tissue engineering. We investigated the glucose uptake characteristics of aggregates of hMSCs undergoing chondrogenesis over a 3-week period both experimentally and by using a mathematical model. Initial concentrations of glucose in the medium were varied from 1 to 4.5 g/L to mimic limiting conditions and glucose uptake profiles were obtained. A reaction-diffusion mathematical model was implemented and solved to estimate kinetic parameters. Experimental glucose uptake rates increased with culture time for aggregates treated with higher initial glucose concentrations (3 and 4.5 g/L), whereas they decreased or remained constant for those treated with lower initial glucose concentrations (1 and 2 g/L). Lactate production rate increased by as much as 40% for aggregates treated with higher initial glucose concentrations (2, 3 and 4.5 g/L), whereas it remained constant for those treated with 1 g/L initial glucose concentration. The estimated DNA-normalized maximum glucose uptake rate decreased by a factor of 9 from day 0-2 (12.5 mmol/s/g DNA) to day 6-8 (1.5 mmol/s/g DNA), after which it started to increase. On day 18-20, its value (17.5 mmol/s/g DNA) was about 11 times greater than its lowest value. Further, the extracellular matrix levels of aggregates at day 14 and day 21 correlated with their overall glucose uptake and lactate production. The results suggest that during chondrogenesis, for optimal results, cells require increasing amounts of glucose. Our results also suggest that diffusion limitations play an important role in glucose uptake even in the smaller size aggregate model of chondrogenesis. Further, the results indicate that glucose uptake or lactate production can be a tool for predicting the end quality of tissue during the process of chondrogenesis. The estimated kinetic parameters can be used to model glucose requirements in cartilage tissue engineering applications.
Assuntos
Condrogênese/fisiologia , Glucose/metabolismo , Células-Tronco Mesenquimais/metabolismo , Modelos Biológicos , Células Cultivadas , Humanos , Cinética , Células-Tronco Mesenquimais/citologiaRESUMO
Although a wealth of knowledge about chemotaxis has accumulated in the past 40 years, these studies have been hampered by the inability of researchers to generate simple linear gradients instantaneously and to maintain them at steady state. Here we describe a device microfabricated by soft lithography and consisting of a network of microfluidic channels that can generate spatially and temporally controlled gradients of chemotactic factors. When human neutrophils are positioned within a microchannel, their migration in simple and complex interleukin-8 (IL-8) gradients can be tested. The cells exhibit strong directional migration toward increasing concentrations of IL-8 in linear gradients. Neutrophil migration halts abruptly when cells encounter a sudden drop in the chemoattractant concentration to zero ("cliff" gradient). When neutrophils are challenged with a gradual increase and decrease in chemoattractant ("hill" gradient), however, the cells traverse the crest of maximum concentration and migrate further before reversing direction. The technique described in this paper provides a robust method to investigate migratory cells under a variety of conditions not accessible to study by earlier techniques.
Assuntos
Bioensaio/instrumentação , Fatores Quimiotáticos/farmacologia , Quimiotaxia de Leucócito/efeitos dos fármacos , Interleucina-8/farmacologia , Neutrófilos/citologia , Neutrófilos/efeitos dos fármacos , Bioensaio/métodos , Técnicas de Cultura de Células/instrumentação , Relação Dose-Resposta a Droga , Desenho de Equipamento , Microquímica , MiniaturizaçãoRESUMO
Current clinical methods to treat articular cartilage lesions provide temporary relief of the symptoms but fail to permanently restore the damaged tissue. Tissue engineering, using mesenchymal stem cells (MSCs) combined with scaffolds and bioactive factors, is viewed as a promising method for repairing cartilage injuries. However, current tissue engineered constructs display inferior mechanical properties compared to native articular cartilage, which could be attributed to the lack of structural organization of the extracellular matrix (ECM) of these engineered constructs in comparison to the highly oriented structure of articular cartilage ECM. We previously showed that we can guide MSCs undergoing chondrogenesis to align using microscale guidance channels on the surface of a two-dimensional (2-D) collagen scaffold, which resulted in the deposition of aligned ECM within the channels and enhanced mechanical properties of the constructs. In this study, we developed a technique to roll 2-D collagen scaffolds containing MSCs within guidance channels in order to produce a large-scale, three-dimensional (3-D) tissue engineered cartilage constructs with enhanced mechanical properties compared to current constructs. After rolling the MSC-scaffold constructs into a 3-D cylindrical structure, the constructs were cultured for 21days under chondrogenic culture conditions. The microstructure architecture and mechanical properties of the constructs were evaluated using imaging and compressive testing. Histology and immunohistochemistry of the constructs showed extensive glycosaminoglycan (GAG) and collagen type II deposition. Second harmonic generation imaging and Picrosirius red staining indicated alignment of neo-collagen fibers within the guidance channels of the constructs. Mechanical testing indicated that constructs containing the guidance channels displayed enhanced compressive properties compared to control constructs without these channels. In conclusion, using a novel roll-up method, we have developed large scale MSC based tissue-engineered cartilage that shows microscale structural organization and enhanced compressive properties compared to current tissue engineered constructs. STATEMENT OF SIGNIFICANCE: Tissue engineered cartilage constructs made with human mesenchymal stem cells (hMSCs), scaffolds and bioactive factors are a promising solution to treat cartilage defects. A major disadvantage of these constructs is their inferior mechanical properties compared to the native tissue, which is likely due to the lack of structural organization of the extracellular matrix of the engineered constructs. In this study, we developed three-dimensional (3-D) cartilage constructs from rectangular scaffold sheets containing hMSCs in micro-guidance channels and characterized their mechanical properties and metabolic requirements. The work led to a novel roll-up method to embed 2-D microscale structures in 3-D constructs. Further, micro-guidance channels incorporated within the 3-D cartilage constructs led to the production of aligned cell-produced matrix and enhanced mechanical function.
Assuntos
Cartilagem/metabolismo , Condrogênese , Colágeno/química , Células-Tronco Mesenquimais/metabolismo , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Animais , Cartilagem/citologia , Bovinos , Células Cultivadas , Humanos , Células-Tronco Mesenquimais/citologiaRESUMO
These studies address critical technical issues involved in creating human mesenchymal stem cell (hMSC)/ scaffold implants for cartilage repair. These issues include obtaining a high cell density and uniform spatial cell distribution within the scaffold, factors that are critical in the initiation and homogeneity of chondrogenic differentiation. For any given scaffold, the initial seeding influences cell density, retention, and spatial distribution within the scaffold, which eventually will affect the function of the construct. Here, we discuss the development of a vacuum-aided seeding technique for HYAFF -11 sponges which we compared to passive infiltration. Our results show that, under the conditions tested, hMSCs were quantitatively and homogeneously loaded into the scaffolds with 90+% retention rates after 24 h in perfusion culture with no negative effect on cell viability or chondrogenic potential. The retention rates of the vacuum-seeded constructs were at least 2 times greater than those of passively seeded constructs at 72 h. Histomorphometric analysis revealed that the core of the vacuum-seeded constructs contained 240% more cells than the core of passively infiltrated scaffolds. The vacuum seeding technique is safe, rapid, reproducible, and results in controlled quantitative cell loading, high retention, and uniform distribution.
Assuntos
Materiais Biocompatíveis , Cartilagem , Técnicas de Cultura de Células , Diferenciação Celular , Células-Tronco Mesenquimais/citologia , Reatores Biológicos , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Diferenciação Celular/fisiologia , Sobrevivência Celular , Condrócitos/citologia , Condrócitos/fisiologia , Humanos , Células-Tronco Mesenquimais/fisiologia , Engenharia TecidualRESUMO
Tissue engineering is viewed as a promising option for long-term repair of cartilage lesions, but current engineered cartilage constructs fail to match the mechanical properties of native tissue. The extracellular matrix of adult human articular cartilage contains highly organized collagen fibrils that enhance the mechanical properties of the tissue. Unlike articular cartilage, mesenchymal stem cell (MSC) based tissue engineered cartilage constructs lack this oriented microstructure and therefore display much lower mechanical strength. The goal of this study was to investigate the effect of biomolecular gradients and shear stress on MSCs undergoing chondrogenesis within a microfluidic device. Via poly(dimethyl siloxane) soft-lithography, microfluidic devices containing a gradient generator were created. Human MSCs were seeded within these chambers and exposed to flow-based transforming growth factor ß1 (TGF-ß1) gradients. When the MSCs were both confluent and exposed to shear stress, the cells aligned along the flow direction. Exposure to TGF-ß1 gradients led to chondrogenesis of MSCs, indicated by positive type II collagen staining. These results, together with a previous study that showed that aligned MSCs produce aligned collagen, suggest that oriented cartilage tissue structures with superior mechanical properties can be obtained by aligning MSCs along the flow direction and exposing MSCs to chondrogenic gradients.
RESUMO
Tissue-engineered (TE) cartilage constructs tend to develop inhomogeneously, thus, to predict the mechanical performance of the tissue, conventional biomechanical testing, which yields average material properties, is of limited value. Rather, techniques for evaluating regional and depth-dependent properties of TE cartilage, preferably non-destructively, are required. The purpose of this study was to build upon our previous results and to investigate the feasibility of using ultrasound elastography to non-destructively assess the depth-dependent biomechanical characteristics of TE cartilage while in a sterile bioreactor. As a proof-of-concept, and to standardize an assessment protocol, a well-characterized three-layered hydrogel construct was used as a surrogate for TE cartilage, and was studied under controlled incremental compressions. The strain field of the construct predicted by elastography was then validated by comparison with a poroelastic finite-element analysis (FEA). On average, the differences between the strains predicted by elastography and the FEA were within 10%. Subsequently engineered cartilage tissue was evaluated in the same test fixture. Results from these examinations showed internal regions where the local strain was 1-2 orders of magnitude greater than that near the surface. These studies document the feasibility of using ultrasound to evaluate the mechanical behaviors of maturing TE constructs in a sterile environment.
Assuntos
Cartilagem Articular/diagnóstico por imagem , Reatores Biológicos , Cartilagem Articular/fisiopatologia , Células Cultivadas , Técnicas de Imagem por Elasticidade , Análise de Elementos Finitos , Humanos , Hidrogéis , Células-Tronco Mesenquimais , Reprodutibilidade dos Testes , Estresse Mecânico , Engenharia TecidualRESUMO
Non-muscle myosin II (NMII) is reported to play multiple roles during cell migration and invasion. However, the exact biophysical roles of different NMII isoforms during these processes remain poorly understood. We analyzed the contributions of NMIIA and NMIIB in three-dimensional (3D) migration and in generating the forces required for efficient invasion by mammary gland carcinoma cells. Using traction force microscopy and microfluidic invasion devices, we demonstrated that NMIIA is critical for generating force during active protrusion, and NMIIB plays a major role in applying force on the nucleus to facilitate nuclear translocation through tight spaces. We further demonstrate that the nuclear membrane protein nesprin-2 is a possible linker coupling NMIIB-based force generation to nuclear translocation. Together, these data reveal a central biophysical role for NMIIB in nuclear translocation during 3D invasive migration, a result with relevance not only to cancer metastasis but for 3D migration in other settings such as embryonic cell migration and wound healing.
Assuntos
Movimento Celular , Núcleo Celular/fisiologia , Miosina não Muscular Tipo IIB/fisiologia , Transporte Ativo do Núcleo Celular , Animais , Fenômenos Biomecânicos , Linhagem Celular Tumoral , Camundongos , Proteínas do Tecido Nervoso/metabolismo , Proteínas Nucleares/metabolismoRESUMO
Tissue engineering is a possible method for long-term repair of cartilage lesions, but current tissue-engineered cartilage constructs have inferior mechanical properties compared to native cartilage. This problem may be due to the lack of an oriented structure in the constructs at the microscale that is present in the native tissue. In this study, we utilize contact guidance to develop constructs with microscale architecture for improved chondrogenesis and function. Stable channels of varying microscale dimensions were formed in collagen-based and polydimethylsiloxane membranes via a combination of microfabrication and soft-lithography. Human mesenchymal stem cells (MSCs) were selectively seeded in these channels. The chondrogenic potential of MSCs seeded in these channels was investigated by culturing them for 3 weeks under differentiating conditions, and then evaluating the subsequent synthesized tissue for mechanical function and by type II collagen immunohistochemistry. We demonstrate selective seeding of viable MSCs within the channels. MSC aligned and produced mature collagen fibrils along the length of the channel in smaller linear channels of widths 25-100 µm compared to larger linear channels of widths 500-1000 µm. Further, substrates with microchannels that led to cell alignment also led to superior mechanical properties compared to constructs with randomly seeded cells or selectively seeded cells in larger channels. The ultimate stress and modulus of elasticity of constructs with cells seeded in smaller channels increased by as much as fourfolds. We conclude that microscale guidance is useful to produce oriented cartilage structures with improved mechanical properties. These findings can be used to fabricate large clinically useful MSC-cartilage constructs with superior mechanical properties.