Foramen mandibulae as an indicator of successful conduction anesthesia.

Comparative measurements were made of 144 orthopantomographs in 50 patients with successful and 94 patients with unsuccessful inferior alveolar nerve block anesthesia. The results show that the bony lingula is prominent in 28.5% of all patients, or in 56.0% of those with unsuccessful anesthesia. The variables mandibular notch vs. mandibular foramen (MN-MF) and the anterior ramus ridge vs. mandibular foramen (ARR-MF) show greater distances in the group of patients with successful anesthesia, while the variables of posterior ramus ridge vs. mandibular foramen (PRR-MF) and mandibular angle vs. mandibular foramen (MA-MF) were greater in the group of patients with unsuccessful anesthesia (p > 0.05). It is concluded that the variability in position of the mandibular foramen among others may be responsible for an occasional failure of inferior alveolar nerve block.

Evaluation of denture stomatitis in Croatian adult population.

Denture stomatitis (DS) is often found under the removable partial dentures (RPDs). There are many factors influencing it, such as patient's age and gender, smoking habits, denture age, denture material, denture wearing habits, denture hygiene habits, oral hygiene instruction, denture cleanness and denture plaque accumulation. The aim of this study was to find out the influence these factors have on the prevalence of DS under RPDs and complete dentures (CDs). A total of 200 patients took part in this study. Half of the examined patients (100) wore CD and the other half (100) RPDs. There were 63 males and 137 females, aged between 45 and 83 years. Different smoking habits, denture wearing habits, denture hygiene habits, denture cleanness and oral hygiene instructions had significant influence on the degree of DS in CD wearers (p < 0.01). In the RPD wearers, denture material and denture support had a significant influence on DS (p < 0.01). The significant correlation was found between the denture plaque accumulation and the DS in complete maxillary and mandibular (rhoU = 0.85; rhoL = 0.61) and removable maxillary and mandibular partial dentures (rhoU = 0.45; rhoL = 0.62).

Radiographic cephalometry of the facial profile.

Radiographic cephalometry is a biomorphological measuring method used in the prosthodontics as well, and for the facial profile analysis of persons with complete dentures. The purpose of this examination was to objectivize the facial esthetics in patients with complete dentures. The measurements were taken from LL X-ray radiographs obtained by the apparatus "Ortoceph 10" (Siemens, Bensheim, Germany). On the sample of 80 subjects a convexity angle of facial bone structures (N-A: A-Pg) and profile angle of soft facial tissue (ft-unt: lnt-ct) have been examined. The subjects were divided into a group with upper and lower complete dentures (20 males and 20 females) and a group with natural teeth of eugnatic characteristics (20 male and 20 female). The measurements were taken by standard protractor at 0.5% precision. The statistical analysis within and among groups has been made by F-test and t-test respectively. The results showed that the bone structure convexity angle span a range between 0 degree and 5.5 degrees (X = 2.5 degrees), and the facial profile angle between 139.5 degrees and 155 degrees (X = 149 degrees) in persons with complete dentures. In persons with natural teeth the values of bone structure convexity angles span a range between -0.5 degree and 4.8 degrees (X = 2 degrees), and the facial profile angle between 136 degrees and 155.5 degrees (X = 151 degrees). The results of tests proved that there were no statistically significant differences in examined variables between persons with natural teeth and those with complete dentures (p > 0.05). The conclusion is that clinical methods of determining the vertical and horizontal intermaxilliary relations used in the designing procedures of complete dentures were reliable enough in reconstruction of examined angles of soft and hard facial profile structures.

Influence of age and gender on radiomorphometric indices of the mandible in removable denture wearers.

The objective of this study was to measure and assess a number of radiomorphometric indices of the mandibular removable denture wearers taking into account age and gender. In a total of 136 dental panoramic radiographs (DPR) the following parameters were evaluated: MI = thickness of the mandibular cortex below the mental foramen, AI = thickness at the antegonion and GI = thickness at gonion; PMI = MI/distance between the low border of the mandible and the low border of the mental foramen, and MCI = mandibular cortical index, based on the assessment of the 3 categories of cortical appearance due to the resorptive changes. There were 40 male patients (mean age 72.7; range 56 to 84 years) and 96 female patients (mean age 69.7; range 48 to 86 years). Patients were grouped according to age into three age groups (1 = less than 65 years; 2 = 65-75 years; 3 = more than 75 years). The results revealed that MI, PMI, AI and GI showed a general downward trend with age for the both sexes until 75 years of age when the mean values of GI, AI and MI begun to fall down sharply for females compared to males. The difference was significant between age groups and gender for GI and AI. Only two categories (C2 and C3) of MCI have been recognized in our study sample, due to the relatively old age groups of patients with removable dentures. However, significantly higher incidence of C3 existed in the oldest group of females.

Screening of fixed prosthodontic dentures after five years of use in relation to material and construction.

The aim of this study was to screen patients with fixed prosthodontic appliances that were in oral cavity for a period of 5 years or more and to assess clinically and radiologically root caries, gingival recession, pocket formation, alveolar ridge resorption, as well as gingival (GI) and plaque index (PI). The aim also was to find out the differences between materials and constructions, between abutment and non-abutment teeth, and to find out the need for replacement. A total of 260 patients and their orthopantomograms were examined, with a total of 2,265 teeth, 610 being bridge abutments and 246 being crowns. The most frequent were metal+ acrylic veneer crowns or bridges. Root caries was found under the abutments in 10-20%; however abutments with ceramic crowns had the lowest percentage of caries (p < 0.01). Alveolar ridge resorption, pocket formation deeper than 3 mm and gingival recession of various degree was found in 50% of the cases, again with the lowest percentage of ceramic-fused-to-metal appliances (p < 0.01). Pocket depth was registered in significantly higher percentage in metal-acrylic veneer appliances compared to natural teeth (p < 0.01), while there was no significant difference between metal-ceramic appliances and natural teeth (p > 0.05). Although the worst findings were recorded for metal- + acrylic veneer crowns for PI, no significant difference existed between crowns of different material or non-abutment teeth (p > 0.05). There was statistically significant difference between abutments with metal + acrylic veneer crowns, full metal crowns, metal ceramic crowns and non-abutments for GI scores. Higher percentage of scores 0 and 1 was recorded for metal ceramic crowns and non-abutments and significantly higher percentage of scores 2 and 3 was recorded for metal + acrylic veneer crowns and full metallic crowns. Almost 50% of metal-ceramic abutments had no pathologic findings. Almost 30% of the patients needed replacement, or even some abutments to be extracted and therefore a new prosthodontic appliance.

Oral status, aesthetic materials and frequency of crowns and bridges in patients with fixed prosthetic appliances living in the Metkovic region.

The aim of the study was to examine oral status in patients of the Metkovic region with fixed prosthodontic appliances. The aim was also to evaluate aesthetic materials used, and difference between the frequency of crowns and bridges dependent on patient's age and frequency of visits to dentist. The examination was performed on 212 dental patients with fixed prosthetic appliances, from the Public Health Center "Metkovic". A questionnaire was created for the purpose of this study and was filled in by the patients. The dentist registered oral status. Descriptive statistics and chi 2 tests were used for the data analysis. Following conclusions were made: 1. The examined patients had relatively high caries (tooth decay), gangrene and residual roots prevalence, the oral hygiene was not appropriate, calculus and gingivitis were diagnosed in all patients (100%) and these facts point out to the insufficient preventive oral health care in the Metkovic region, as well as to the insufficient self-perception on the proper oral hygiene maintenance. 2. Patients who visit their dentist regularly (once a year or more) have significantly more crowns than bridges than the patients who visit their dentist irregularly or when in pain (p < 0.01). 3. Almost all fixed prosthetic appliances not older than 10 years were made of porcelain (98%), while acrylic veneer crowns (or chromasite) were more frequent in appliances older than 10 or 15 years (p < 0.01). There was no gender difference dependent on the material used (p > 0.05). High frequency of porcelain was attributed to the high economic status of this region, as well as to a dentist's preference.

Relationship between the face and the tooth form.

The aim of this study was to re-examine Leon Williams geometric theory and to find the degree of correspondence between the face and the tooth form in the population of Zenica, Bosnia and Herzegovina. Two thousand individuals with intact frontal teeth, in age between 17 and 24 years, were measured for 3 horizontal distances on the face: temporal width (Ft-Ft), zygomatic width (Zyg-Zyg) and gonial width (Go-Go) and for 3 horizontal distances on the both upper incisors: cervical width (CW), contact point width (CPW) and incisal width (IW). The length of the face (Tr-Gn) as well as the length of the central maxillary incisors were also measured. The results revealed: 1. Men had significantly larger dimensions for all facial and tooth dimensions (p < 0.05) than women, except for the cervical tooth width (p > 0.05); the left and the right central incisors were of identical dimensions and forms (p > 0.05). 2. The width of upper central incisors were smaller approximately 1.5 mm than in west Europeans. 3. Upon the relation between the 3 horizontal dimensions measured on the face and upper maxillary incisor, 11 facial forms and 10 upper central tooth forms could be recognised in the study population, but 98% of the population had only 3 tooth and face forms. Face shapes: oval face--83.3%, square-tapered face--9.2% and tapered face--7%; tooth forms: tapered-square incisor--53%, oval incisor--30%, tapered incisor--16%. 4. Reversed and enlarged tooth form was in line associated with the facial form in only 30%, while the most common combination was of the oval face form and the tapered-square central incisor (45%). 5. These results disapprove William's theory and may be helpful for the choice of artificial teeth in complete denture construction and the dental industry.

Analysis of occlusal contacts in different types of prosthodontic appliances, Eichner classifications, presence RCP-ICP slide and the type of occlusion.

The aim of the study was to determine the number and the type of the occlusal contacts (strong, weak) with respect to the type of the prosthodontic appliance (fixed, removable, combined fixed-removable) and with respect to the Eichner classification in patients with their appliances being in a good function for a long time. The aim of the study was also to determine the number and the type of the occlusal contacts (strong, weak) with respect to the type of occlusion (canine guided, group function or balanced) and the presence of the RCP-ICP slide. A total of 440 patients with different types of prosthodontic appliances were examined for the antagonistic occlusal contacts using occlusal strips of 11 microm and 50 microm. The average number of occlusal contacts was 10.5 for the upper and 10.46 for the lower posterior teeth, approximately 5 on each side of the tooth arch. The results of the study suggest that the biggest number of occlusal contacts were recorded for the small span fixed appliances (2 on average), the greater span fixed and fixed-removable prosthodontic appliances exhibited 1.6 occlusal contacts, and the removable complete denture exhibited 1.2 contact per the tooth in the posterior region. The number of the hard occlusal contacts was significantly greater in fixed and fixed-removable prosthodontic appliances in comparison with the complete dentures (p < 0.05), while there was no significant difference between the prosthodontic appliances for the weak occlusal contacts (p > 0.05). The overall number of the occlusal contacts, as well as the number of the hard occlusal contacts was significantly greater in the Eichner class I cases (p < 0.05) in comparison with the Eichner classes II and III. The number of the weak occlusal contacts showed no significant differences with respect to the Eichner classification (p > 0.05). There was no significant difference in the number of occlusal contacts between the appliances with RCP-ICP slide and where ICP and RCP corresponded (p > 0.05).

Ion release from gold/platinum dental alloy: could release of other elements be accountable in the contact allergy attributed to the gold?

OBJECTIVES: The release of metal ions (Al, Ag, Au, Ca, Cd, Co, Cr, Cu, Mg, Mo, Ni, Pd, Pt, Ti, and Zn) from the commercial gold/platinum (Au/Pt) dental alloy of declared composition was studied. METHODS: Au/Pt was soaked in pH 6.0 phosphate buffer, 3.5 pH phosphate buffer and pH 3.5 mixture of lactic, formic and acetic acid, and incubated at 37 degrees C for 1, 2, 3, 4, 5, 6, 7, 14, 21, and 30 days. Six samples (n = 6) of every solution were prepared for any time period. Inductively coupled plasma atomic emission spectroscopy was used for analysis of the released elements. RESULTS: Results demonstrated release of only Cr, Cu, Fe, and Zn from the tested Au/Pt dental alloy (ANOVA, p < 0.001 for buffer, time, and interaction, respectively); however, only Cu and Zn were declared. CONCLUSIONS: The undeclared chromium from Au/Pt dental alloy, or some other element might be responsible for the contact allergy thus far attributed to the gold.

[Assessment of the amount of palladium-silver alloy used for cast posts and veneer crowns]. / Utrosak paladij srebrne legure za lijevanje nadogradnje i fesetirane krunice.

Average amounts of palladium-silver alloy were assessed in a sample of 966 veneer crowns and 667 casted posts. The mean weight values of the samples under study were compared in relation to particular types of anterior teeth. The specimens cast in Auropal SE were weight by the precise balance, Tehtnica, type 6215. Results were analyzed by weight according to the type of the sample under study, and classified according to age, and to the anterior teeth of the upper and lower jaws. On an average, the heaviest posts and veneer crowns were measured on upper canines, whereas the lighest were those on lower incisors. A cast post was found to be by about 40% heavier than a veneer crown on the same tooth.

[A study of the fixing cement resistance by measuring the amount of dissolved zinc in human saliva]. / Ispitivanje otpornosti cementa za fiksiranje mjerenjem kolicine otopljenog cinka u ljudskoj slini.

Use of particular cement depends on its advantageous and disadvantageous properties. Several cements for definite cementation and one for temporary cementation, most commonly used in fixed prosthetics, were studied. The amount of salivary zinc dissolved from cement was determined by the method of atomic absorption spectrophotometry on a Pye Unicam SP 9,800 instrument, using correction of nonspecific signals by means of a deuterium lamp. Evident differences were observed in resistance of particular cements to the action of saliva, as shown by the proportions of zinc dissolved from the cements and found in the saliva.