Enhancing Fluorescence in Both Solution and Solid States Induced by Imine Cage Formation.

Developing luminescent materials that exhibit strong emissions in both solution and solid phases is highly desirable and challenging. Herein, we report imine-bond directed formation of a rigid organic cage (TPE-cage) that was synthesized by [2+4] imine condensation of a TPE-cored tetra-aldehyde (TPE-TA) with a clip-like diamine (XA) to illustrate confinement-induced fluorescence enhancement. Compared to the non-emissive TPE-TA (ϕF =0.26 %) in the dichloromethane (DCM) solution, the TPE-cage achieved a remarkable (~520-fold) emission enhancement (ϕF =70.38 %). In contrast, a monomeric tetra-imine model compound (TPE-model) showed only a minor enhancement (ϕF =0.56 %) in emission compared to the parent tetra-aldehyde TPE-TA. The emission of TPE-cage was further enhanced by ~1.5-fold (ϕF =80.96 %) in the aggregated state owing to aggregation-induced emission enhancement (AIEE). This approach establishes the potential for synthesizing luminescent materials with high emission in both solution and solid-state by employing a single-step imine condensation reaction.

Self-Assembly of an [M8 L24 ]16+ Intertwined Cube and a Giant [M12 L16 ]24+ Orthobicupola.

Through coordination-driven self-assembly, aesthetically captivating structures can be formed by tuning the length or flexibility of various components. The self-assembly of an elongated rigid terphenyl-based tetra-pyridyl ligand (L1) with a cis-Pd(II) acceptor produces an [M12 L16 ]24+ triangular orthobicupola structure (1). When flexibility is introduced into the ligand by the incorporation of a -CH2 - group between the dipyridylamine and terphenyl rings in the ligand (L2), anunique [M8 L24 ]16+ water-soluble 'intertwined cubic structure' (2) results. The inherent flexibility of ligand L2 might be the key factor behind the formation of the thermodynamically stable and 'intertwined cubic structure' in this scenario. This research showcases the ability to design and fabricate novel, topologically distinctive molecular structures by a straightforward and efficient approach.

Water-Soluble Pd6L3 Molecular Bowl for Separation of Phenanthrene from a Mixture of Isomeric Aromatic Hydrocarbons.

Phenanthrene is a high-value raw material in chemical industries. Separation of phenanthrene from isomeric anthracene continues to be a big challenge in the industry due to their very similar physical properties. Herein, we report the self-assembly of a water-soluble molecular bowl (TB) from a phenothiazine-based unsymmetrical terapyridyl ligand (L) and a cis-blocked 90° Pd(II) acceptor. TB featured an unusual bowl-like topology, with a wide rim diameter and a hydrophobic inner cavity fenced by the aromatic rings of the ligand. The above-mentioned features of TB allow it to bind polyaromatic hydrocarbons in its confined cavity. TB shows a higher affinity for phenanthrene over its isomer anthracene in water, which enables it to separate phenanthrene with ∼93% purity from an equimolar mixture of phenanthrene and anthracene. TB is also able to extract pyrene with around ∼90% purity from an equimolar mixture of coronene, perylene, and pyrene. Moreover, TB can be reused for several cycles without significant degradation in its performance as an extracting agent. This clean strategy of separation of phenanthrene and pyrene from a mixture of hydrophobic hydrocarbons by aqueous extraction is noteworthy.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene.

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Post-Synthesis Conversion of an Unstable Imine Cage to a Stable Cage with Amide Moieties Towards Selective Receptor for Fluoride.

Synthesis of robust covalent macrocycles/cages via multiple amide-bond forming reaction is highly challenging and generally it needs multistep reactions. One-pot reaction of appropriate di-/tri-acyl chloride with a diamine generally results polymers or oligomers instead of discrete architectures. To overcome this limitation, a strategy is reported here using dynamic imine chemistry for facile construction of imine-based macrocycle and cage upon treatment of a diamine with di- and tri-aldehydes respectively, followed by post-synthesis one-step conversion of imine bonds to amides to form the desired robust macrocycle and cage containing multiple amide bonds. While the macrocycle was found to form aggregates in DMSO, the cage was intact without any aggregation. Six amide groups in the confined pocket of the cage made it an ideal receptor for selective binding of fluoride with very high selectivity (∼3 × ${\times }$ 103 fold) over chloride, and it was silent towards other halides, phosphate, and other oxyanions.

Nucleation of Tiny Silver Nanoparticles by Using a Tetrafacial Organic Molecular Barrel: Potential Use in Visible-Light-Triggered Photocatalysis.

Coordination-driven self-assembly of discrete molecular architectures of diverse shapes and sizes has been well studied in the last three decades. Use of dynamic imine bonds for designing analogous metal-free architectures has become a growing challenge recently. This article reports an organic molecular barrel (OB4R ) as a potential template for nucleation and stabilization of very tiny (<1.5 nm) Ag nanoparticles (AgNPs). Imine bond condensation of a rigid tetra-aldehyde with a flexible diamine followed by imine-bond reduction yielded the discrete tetragonal organic barrel (OB4R ). The presence of a molecular pocket ornamented with eight diamine moieties gives the potential for encapsulation of silver(I). The organic barrel was finally used as a molecular vessel for the controlled nucleation of silver nanoparticles (AgNPs) with fine size tuning through binding of AgI ions in the confined space of the barrel followed by reduction. Transmission electron microscopy (TEM) analysis of the Ag0 @OB4R composite revealed that the mean particle size is 1.44±0.16 nm. The composite material has approximately 52 wt % silver loading. The barrel-supported ultrafine AgNPs [Ag0 @OB4R ] are found to be an efficient photocatalyst for facile Ullmann-type aryl-amination coupling of haloarenes at ambient temperature without using any additives. The catalyst was stable for several cycles of reuse without any agglomeration. The new composite Ag0 @OB4R represents the first example of discrete organic barrel-supported AgNPs employed as a photocatalyst in Ullmann-type coupling reactions at room temperature.

Self-Assembly of a Pd8 Macrocycle and Pd12 Homochiral Tetrahedral Cages Using Poly(tetrazolate) Linkers.

A two-dimensional molecular square (MC) was obtained by the self-assembly of a bis(tetrazole) linker, 4,4'-bis(1H-tetrazol-5-yl)-1,1'-biphenyl (H2L1), with a square-planar metal acceptor M [M = (tmeda)Pd(NO3)2, where tmeda = N,N,N',N'-tetramethylethane-1,2-diamine] in dimethyl sulfoxide (DMSO) followed by crystallization. The uncommon 2,3-binding mode through N atoms of the tetrazole rings in this assembly leads to the formation of an octanuclear molecular square. The molecular square MC [Pd8(L1)4(NO3)8] is unstable in DMSO and slowly converts to a dynamic mixture of a 3D tetrahedral cage T1 [Pd12(L1)6(NO3)12] and the macrocycle MC. A tetrahedral cage (T1) is formed by the usual 1,3-binding mode of the tetrazole rings. However, self-assembly of the T1 [Pd12(L1)6(PF6)12] was possible to access in the pure form in a less polar solvent like acetonitrile. The pure T1 [Pd12(L1)6(PF6)12] also converts to a mixture of T1 and MC in DMSO. Interestingly, when a tris(tetrazole) linker, tris(4-(1H-tetrazol-5-yl)phenyl)amine (H3L2), was treated with the acceptor M, it produced a tetrahedral nanocage T2 [Pd12(L2)4(NO3)12] through 1,3-binding mode of the tetrazole rings without any trace of an octahedral cage through 2,3-binding mode of the tetrazole moieties.

A water-soluble Pd4 molecular tweezer for selective encapsulation of isomeric quinones and their recyclable extraction.

Quinones (QN) are one of the main components of diesel exhaust particulates that have significant detrimental effects on human health. Their extraction and purification have been challenging tasks because these atmospheric particulates exist as complex matrices consisting of inorganic and organic compounds. In this report, we introduce a new water soluble Pd4L2 molecular architecture (MT) with an unusual tweezer-shaped structure obtained by self-assembly of a newly designed phenothiazine-based tetra-imidazole donor (L) with the acceptor cis-[(tmeda)Pd(NO3)2] (M) [ tmeda = N,N,N',N'-tetramethylethane-1,2-diamine]. The molecular tweezer encapsulates some quinones existing in diesel exhaust particulates (DEPs) leading to the formation of host-guest complexes in 1 : 1 molar ratio. Moreover, MT binds phenanthrenequinone (PQ) more strongly than its isomer anthraquinone (AQ), an aspect that enables extraction of PQ with a purity of 91% from an equimolar mixture of the two isomers. Therefore, MT represents an excellent example of supramolecular receptor capable of selective aqueous extraction of PQ from PQ/AQ with many cycles of reusability.

Hydrazone-Linked Covalent Organic Framework Catalyst via Efficient Pd Recovery from Wastewater.

Global consumption and discharge of palladium (Pd) have raised environmental concerns but also present an opportunity for the sustainable recovery and reuse of this precious metal. Adsorption has proven to be an efficient method for the selective recovery of Pd from industrial wastewater. This study investigated a hydrazone-linked covalent organic framework (Tfpa-Od COF) as a potential material for the high-affinity adsorption of Pd2+ ions from wastewater, achieving a Kd value of 3.62 × 106 mL g-1. The electron-rich backbone of the COF contributes to its excellent selective removal efficiency (up to 100%) and adsorption capacity of 372.59 mg g-1. Furthermore, the Pd-adsorbed COF was evaluated as a sustainable catalyst for the Suzuki-Miyaura coupling reaction, demonstrating good catalytic conversion and recyclability. This work attempts to showcase a protocol for reusing waste palladium generated in water to fabricate heterogeneous catalysts and, thereby, promote the circular economy concept.

Self-Assembly of Octanuclear PtII/PdII Coordination Barrels and Uncommon Structural Isomerization of a Photochromic Guest in Molecular Space.

Two tetragonal molecular barrels TB1 and TB2 were successfully synthesized by coordination-driven self-assembly of a tetrapyridyl donor (L) of the thiazolo[5,4-d]thiazole backbone with cis-blocked 90° Pd(II) and Pt(II) acceptors, respectively. The single-crystal structure analysis of TB1 revealed the formation of a two-face opened tetragonal Pd8 molecular barrel architecture. In contrast, the isostructural Pt(II) barrel (TB2) is water-soluble. The large confined hydrophobic molecular cavity including wide open windows and good water solubility of the barrel TB2 made it a potential molecular container for the encapsulation of guests with different sizes and properties. This has been exploited to encapsulate and stabilize the open form of a photochromic molecule (G2) in water, while the same photochromic molecule exists exclusively in a cyclic zwitterionic form in aqueous medium in the absence of the barrel TB2. This cyclic form is very stable in water and does not go back to its parent open form under common external stimuli. Surprisingly, reverse switching of the cyclic form to a colored hydrophobic open form was also possible instantly in water upon addition of the solid barrel TB2 into an aqueous solution of G2. Such a fast reverse isomerization of an irreversible process in aqueous medium by utilizing host-guest interaction of the barrel TB2 and the guest G2 is interesting. The barrel TB2 was also capable of encapsulating the water-insoluble radical initiator G1 in aqueous medium.