G6PD deficiency in malaria endemic areas of Nepal.

BACKGROUND: Glucose-6-phosphate dehydrogenase (G6PD) deficiency is currently a threat to malaria elimination due to risk of primaquine-induced haemolysis in G6PD deficient individuals. The World Health Organization (WHO) recommends G6PD screening before providing primaquine as a radical treatment against vivax malaria. However, evidence regarding the prevalence and causing mutations of G6PD deficiency in Nepal is scarce. METHODS: A cross-sectional, population-based, prevalence study was carried out from May to October 2016 in 12 malaria-endemic districts of Nepal. The screening survey included 4067 participants whose G6PD status was determined by G6PD Care Start™ rapid diagnostic test and genotyping. RESULTS: The prevalence of G6PD deficiency at the national level was 3.5% (4.1% among males and 2.1% among females). When analysed according to ethnic groups, G6PD deficiency was highest among the Janajati (6.2% overall, 17.6% in Mahatto, 7.7% in Chaudhary and 7.5% in Tharu) and low among Brahman and Chhetri (1.3%). District-wise, prevalence was highest in Banke (7.6%) and Chitwan (6.6%). Coimbra mutation (592 C>T) was found among 75.5% of the G6PD-deficient samples analysed and Mahidol (487 G>A) and Mediterranean (563 C>T) mutations were found in equal proportions in the remaining 24.5%. There was no specific geographic or ethnic distribution for the three mutations. CONCLUSIONS: This study has identified populations with moderate to high prevalence of G6PD deficiency which provides strong evidence supporting the WHO recommendations to screen G6PD deficiency at health facility level before the use of primaquine-based radical curative regimen for Plasmodium vivax.

Prevalence of HIV, syphilis, and assessment of the social and structural determinants of sexual risk behaviour and health service utilisation among MSM and transgender women in Terai highway districts of Nepal: findings based on an integrated biological and behavioural surveillance survey using respondent driven sampling.

BACKGROUND: Men who have sex with men (MSM) and transgender people are disproportionately affected by HIV and sexually transmitted infections. MSM and transgender people in Nepal experience considerable discrimination and marginalisation, they are subject to abuse from legal authorities and suffer from mental health issues. These social and structural factors can lead to increased sexual risk behaviour, barriers to accessing health care and result in adverse health outcomes. This study aims to assess the prevalence of HIV and syphilis, and how individual and socio-structural factors influence sexual risk behaviour and health care service uptake, among MSM and transgender women in the Terai highway districts of Nepal. METHODS: A cross-sectional survey was conducted in June 2016 in eight Terai highway districts of Nepal, recruiting 340 MSM and transgender women through respondent driven sampling. The primary outcome variables were HIV and syphilis prevalence. The secondary outcome variables were sexual risk behaviour and health care service uptake. Logistic regression models were used to assess the individual and socio-structural determinants of sexual risk behaviour and health care service uptake. RESULTS: The prevalence of HIV among MSM was 5%, whereas it was 13% in transgender women. The prevalence of active syphilis was 4% in MSM and 11% among transgender women. Among transgender women, 76% were involved in sex work, and 51% had experienced discrimination in one or more settings. In multivariable analysis, having visited an outreach centre was positively associated with condom use in the last sexual encounter among both MSM (AOR: 5.37, 95% CI: 2.42-11.94, p < 0.001) and transgender women (AOR: 2.37, 95% CI: 1.12-5.02, p = 0.025). Moreover, transgender women who reported being open towards family about sexual identity/behaviour were 2.4 more likely to have visited an outreach centre (AOR: 2.40, 95% CI: 1.04-5.57, p = 0.041). CONCLUSIONS: The high prevalence of HIV and syphilis, as well as indicators of marginalisation and discrimination among transgender women, highlights the increased burden transgender women in Nepal are facing and the need for tailored interventions. Moreover, since health care service uptake is an important factor in determining sexual risk behaviour among MSM and transgender women in Nepal, outreach services should be scaled up.

pH-sensitive nanomedicine of novel tubulin polymerization inhibitor for lung metastatic melanoma.

Microtubule binding agents such as paclitaxel and vincristine have activity in metastatic melanoma. However, even responsive tumors develop resistance, highlighting the need to investigate new drug molecules. Here, we showed that a new compound, CH-2-102, developed by our group, has high anti-tumor efficacy in human and murine melanoma cells. We confirmed that CH-2-102 robustly suppresses the microtubule polymerization process by directly interacting with the colchicine binding site. Our results unveil that CH-2-102 suppresses microtubule polymerization and subsequently induces G2 phase cell arrest as one of the possible mechanisms. Notably, CH-2-102 maintains its efficacy even in the paclitaxel resistance melanoma cells due to different binding sites and a non-Pgp substrate. We developed a pH-responsive drug-polymer Schiff bases linker for high drug loading into nanoparticles (NPs). Our CH-2-102 conjugated NPs induced tumor regression more effectively than Abraxane® (Nab-paclitaxel, N-PTX), free drug, and non-sensitive NPs in B16-F10 cell-derived lung metastasis mouse model. Furthermore, our results suggest that the formulation has a high impact on the in vivo efficacy of the drug and warrants further investigation in other cancers, particularly taxane resistant. In conclusion, the microtubule polymerization inhibitor CH-2-102 conjugated pH-responsive NPs induce tumor regression in lung metastasis melanoma mice, suggesting it may be an effective strategy for treating metastatic melanoma.

Nanoformulation design and therapeutic potential of a novel tubulin inhibitor in pancreatic cancer.

Successful treatment of pancreatic cancer remains a challenge due to desmoplasia, development of chemoresistance, and systemic toxicity. Herein, we synthesized (6-(3-hydroxy-4-methoxylphenyl)pyridin-2-yl) (3,4,5-trimethoxyphenyl)methanone (CH-3-8), a novel microtubule polymerization inhibitor with little susceptible to transporter-mediated chemoresistance. CH-3-8 binding to the colchicine-binding site in tubulin protein was confirmed by tubulin polymerization assay and molecular modeling. CH-3-8 disrupted microtubule dynamics at the nanomolar concentration in MIA PaCa-2 and PANC-1 pancreatic cancer cell lines. CH-3-8 significantly inhibited the proliferation of these cells, induced G2/M cell cycle arrest, and led to apoptosis. CH-3-8 is hydrophobic with an aqueous solubility of 0.97 ± 0.16 µg/mL at pH 7.4. We further conjugated it with dodecanol through diglycolate linker to increase hydrophobicity and thus loading in lipid-based delivery systems. Hence, we encapsulated CH-3-8 lipid conjugate (LDC) into methoxy poly(ethylene glycol)-block-poly(2-methyl-2-carboxyl-propylene carbonate-graft-dodecanol) (mPEG-b-PCC-g-DC) polymeric nanoparticles (NPs) by solvent evaporation, resulting in a mean particle size of 125.6 ± 2.3 nm and drug loading of 10 ± 1.0% (w/w) while the same polymer could only load 1.6 ± 0.4 (w/w) CH-3-8 using the same method. Systemic administration of 6 doses of CH-3-8 and LDC loaded NPs at the dose of 20 mg/kg into orthotopic pancreatic tumor-bearing NSG mice every alternate day resulted in significant tumor regression. Systemic toxicity was negligible, as evidenced by histological evaluations. In conclusion, CH-3-8 LDC loaded NPs have the potential to improve outcomes of pancreatic cancer by overcoming transporter-mediated chemoresistance and reducing systemic toxicity.

Redox-responsive nanoplatform for codelivery of miR-519c and gemcitabine for pancreatic cancer therapy.

Desmoplastic and hypoxic pancreatic cancer microenvironment induces aberrant expression of miRNAs and hypoxia-inducible factor-1α (HIF-1α) responsible for gemcitabine (GEM) resistance. We demonstrated that miR-519c was down-regulated in pancreatic cancer and transfection of miR-519c in GEM-resistant pancreatic cancer cells inhibited HIF-1α level under hypoxia. We synthesized redox-sensitive mPEG-co-P(Asp)-g-DC-g-S-S-GEM polymer, with GEM payload of 14% (w/w) and 90% GEM release upon incubation with l-glutathione. We synthesized mPEG-co-P(Asp)-g-TEPA-g-DC for complex formation with miRNA. Chemical modification of miR-519c with 2'-O-methyl phosphorothioate (OMe-PS) at 3' end enhanced its stability and activity without being immunogenic. Epidermal growth factor receptor targeting peptide GE11 decoration increased tumor accumulation of micelles after systemic administration and significantly inhibited orthotopic desmoplastic pancreatic cancer growth in NSG mice by down-regulating HIF-1α and genes responsible for glucose uptake and cancer cell metabolism. Our multifunctional nanomedicine of GEM and OMe-PS-miR-519c offers a novel therapeutic strategy to treat desmoplasia and hypoxia-induced chemoresistance in pancreatic cancer.

Nanoparticulate delivery of potent microtubule inhibitor for metastatic melanoma treatment.

Melanoma is the most aggressive type of skin cancer, which readily metastasizes through lymph nodes to the lungs, liver, and brain. Since the repeated administration of most chemotherapeutic drugs develops chemoresistance and severe systemic toxicities, herein we synthesized 2-(4-hydroxy-1H-indol-3-yl)-1H-imidazol-4-yl)(3,4,5-trimethoxyphenyl) methanone (abbreviated as QW-296), a novel tubulin destabilizing agent with little susceptible to transporter-mediated drug resistance. QW-296 disturbed the microtubule dynamics at the nanomolar concentration in A375 and B16F10 melanoma cells. QW-296 binding to colchicine-binding site on tubulin protein was confirmed by molecular modeling and tubulin polymerization assay. QW-296 significantly inhibited A375 and B16F10 cell proliferation, induced G2/M cell cycle arrest and led to apoptosis and cell death. To improve its aqueous solubility, QW-296 was encapsulated into methoxy poly(ethyleneglycol)-b-poly(carbonate-co-lactide) [mPEG-b-P(CB-co-LA)] polymeric nanoparticles by solvent evaporation, with the mean particle size of 122.0 ±â€¯2.28 nm and drug loading of 3.70% (w/w). Systemic administration of QW-296 loaded nanoparticles into C57/BL6 albino mice bearing lung metastatic melanoma at the dose of 20 mg/kg 4 times a week for 1.5 weeks resulted in significant tumor regression and prolonged mouse median survival without significant change in mouse body weight. In conclusion, QW-296 loaded nanoparticles have the potential to treat metastatic melanoma.

The fourth annual BRDS on genome editing and silencing for precision medicines.

Precision medicine is promising for treating human diseases, as it focuses on tailoring drugs to a patient's genes, environment, and lifestyle. The need for personalized medicines has opened the doors for turning nucleic acids into therapeutics. Although gene therapy has the potential to treat and cure genetic and acquired diseases, it needs to overcome certain obstacles before creating the overall prescription drugs. Recent advancement in the life science has helped to understand the effective manipulation and delivery of genome-engineering tools better. The use of sequence-specific nucleases allows genetic changes in human cells to be easily made with higher efficiency and precision than before. Nanotechnology has made rapid advancement in the field of drug delivery, but the delivery of nucleic acids presents unique challenges. Also, designing efficient and short time-consuming genome-editing tools with negligible off-target effects are in high demand for precision medicine. In the fourth annual Biopharmaceutical Research and Development Symposium (BRDS) held at the University of Nebraska Medical Center (UNMC) on September 7-8, 2017, we covered different facets of developing tools for precision medicine for therapeutic and diagnosis of genetic disorders.

Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery.

The electrospinning process has gained popularity due to its ease of use, simplicity and diverse applications. The properties of electrospun fibers can be controlled by modifying either process variables (e.g., applied voltage, solution flow rate, and distance between charged capillary and collector) or polymeric solution properties (e.g., concentration, molecular weight, viscosity, surface tension, solvent volatility, conductivity, and surface charge density). However, many variables affecting electrospinning are interdependent. An optimized electrospinning process is one in which these parameters remain constant and continuously produce nanofibers consistent in physicochemical properties. In addition, nozzle configurations, such as single nozzle, coaxial, multi-jet electrospinning, have an impact on the fiber characteristics. The polymeric solution could be aqueous, a polymeric melt or an emulsion, which in turn leads to different types of nanofiber formation. Nanofiber properties can also be modified by polarity inversion and by varying the collector design. The active moiety is incorporated into polymeric fibers by blending, surface modification or emulsion formation. The nanofibers can be further modified to deliver multiple drugs, and multilayer polymer coating allows sustained release of the incorporated active moiety. Electrospun nanofibers prepared from polymers are used to deliver antibiotic and anticancer agents, DNA, RNA, proteins and growth factors. This review provides a compilation of studies involving the use of electrospun fibers in biomedical applications with emphasis on nanoparticle-impregnated nanofibers.

Comparison of electrospun and solvent cast polylactic acid (PLA)/poly(vinyl alcohol) (PVA) inserts as potential ocular drug delivery vehicles.

PURPOSE: The purpose of this work was to develop, characterize and compare electrospun nanofiber inserts (ENIs) and solvent cast polymeric inserts (SCIs) for ocular drug delivery. METHODS: ENI and SCI of 1%, 5% and 10% w/w dexamethasone were fabricated using a blend of poly-lactic acid (PLA) and poly-vinyl alcohol (PVA). Inserts were characterized for morphology, thickness, pH, drug content, drug crystallinity, in vitro drug release, sterility, dimethylformamide (DMF) and chloroform content, and cytotoxicity. RESULTS: The thickness of 1%, 5%, and 10% dexamethasone-loaded ENIs were found to be 50µm, 62.5µm, and 93.3µm, respectively, with good folding endurance. SCIs were brittle, with thickness values >200µm. Drug release rates from 1%, 5% and 10% ENIs were found to be 0.62µg/h, 1.46µg/h, and 2.30µg/h, respectively, while those from SCIs were erratic. DMF content in ENIs and SCIs were 0.007% w/w and 0.123% w/w, respectively, while chloroform was not detected. No cytotoxicity was observed from ENIs in cultured bovine corneal endothelial cells for up to 24h. CONCLUSION: We conclude that ENIs are better than SCIs and could be utilized as a potential delivery system for treating anterior segment ocular diseases.