Microspherical Titanium-Phosphorus Double Oxide: Hierarchical Structure Development for Sensing Applications.

Stable, water-soluble titanium complexed with mandelic acid was used as a precursor for titanium phosphorus double oxide obtained in hydrothermal conditions in the presence of phosphoric acid. Surprisingly, hydrolysis of organic complexes provided a microstructured sphere with narrow size distribution, low aggregation and a small fraction of morphological irregularities. Obtained microspheres had a complex structure comprised of flakes, whose size could be manipulated with temperature conditions. Samples were found to be electrochemically active against sulcotrione, a well-recognized herbicide. Electrochemical sensors based on the synthesized microspheres were successfully adapted for natural water reservoir analysis and exhibited low levels of detection of 0.61 µM, limit of quantification of 1.86 µM, wide dynamic linear range from 2 to 200 µM, good selectivity, excellent reproducibility and in-time stability.

Probing Adsorption of Dipeptides on Anatase in H2 O and D2 O: Thermodynamics and Molecular Geometry.

Considering the vast importance of peptide and protein interactions with inorganic surfaces, probing hydrogen bonding during their adsorption on metal oxide surfaces is a relevant task that could shed light on the essential features of their interplay. This work is devoted to studying the dipeptides' adsorption on anatase nanoparticles (ANs) in light and heavy water to reveal differences arising upon the change of the major hydrogen bonding carrier. Thermodynamic study of six native dipeptides' adsorption on ANs in both media shows a strong influence of the solvent on the Gibbs free energy and the effect of side-chain mobile protons on the entropy of the process. The adsorption is endothermic irrespective of the medium and is entropy-driven. Computer simulations of peptide adsorption in both media shows similarity in binding via an amino group and demonstrates structural features of protonated and deuterated peptides in obtained complexes. Calculated peptide- anatase nanoparticle (AN) descriptors indicate surface oxygens as points of peptide-nanoparticle contacts.

Adsorption of Native Amino Acids on Nanocrystalline TiO2: Physical Chemistry, QSPR, and Theoretical Modeling.

The affinity of biomolecules, such as peptides and proteins, with inorganic surfaces, is a fundamental topic in biotechnology and bionanotechnology. Amino acids are often used as "model" bits of peptides or proteins for studying their properties in different environments and/or developing functional surfaces. Despite great demand for knowledge about amino acid interactions with metal oxide surfaces, studies on the issue represent a fragmentary picture. In this paper, we describe amino acid adsorption on nanocrystalline anatase systematically at uniform conditions. Analysis of the Gibbs free adsorption energy indicated how the aliphatic, aromatic, polar, and charged side chain groups affect the binding affinity of the amino acids. Thermodynamic features of the l-amino acid adsorption receive thorough interpretation with calculated molecular descriptors. Theoretical modeling shows that amino acids complex with TiO2 nanoparticles as zwitterions via ammonium group.

Traceless chemical ligations from O-acyl serine sites.

Chemical ligation via O- to N-acyl transfer of O-acylated serine containing peptides affords serine containing native peptides via 8- and 11-membered cyclic transition states opening the door to a wide variety of potential applications to peptide elaboration. The feasibility of these traceless chemical ligations is feasible as supported by computation.

S- to N-Acyl transfer in S-acylcysteine isopeptides via 9-, 10-, 12-, and 13-membered cyclic transition states.

S-Acyl cysteine peptides containing α-, ß- or γ-amino acid residues undergo long-range S- to N-acyl transfer to give analogs of native tripeptides and tetrapeptides containing additional carbon atoms in the chain. The ease of intramolecular S → N-acyl transfer relative to intermolecular transacylation is favored increasingly for 9 < 12 < 13 ~ 10-membered cyclic transition states; the observed order is explained on conformational and intermolecular interaction considerations.

A novel electrochemical sensor for the detection of fipronil and its toxic metabolite fipronil sulfone using TiO2-polytriazine imide submicrostructured composite as an efficient electrocatalyst.

For the first time, a simple and sensitive electrochemical sensor based on a screen printed electrode (SPE) modified with titanium dioxide (TiO2) and polytriazine imide submicrostructured composite (TiO2-PTI) has been developed for the simultaneous detection of fipronil (FIP) and its toxic metabolite fipronil sulfone (FIP-S). The submicrostructured composite material based on TiO2 and PTI was obtained by simple hydrothermal treatment of the Ti peroxocomplexes in the presence of pristine. This carbon nitride allotrope has better crystallinity and conductivity than its graphitic analog. It was found that the TiO2-PTI submicrostructured composite enhanced the electrochemical sensing of the SPE electrode towards FIP and its metabolite FIP-S in 0.1 M Britton-Robinson buffer (pH 10) at the oxidation potentials of 0.82 V and 0.94 V, respectively. In addition, it showed good stability and reproducibility for the determination of both analytes. Under optimal conditions, the peak currents by square wave voltammetry were found to vary linearly with FIP and FIP-S concentrations in the range from 0.01 to 10 µM and from 10 to 50 µM, with a detection limit of 8.42 nM, 3.6 µg/kg for FIP and 9.72 nM, 4.04 µg/kg for FIP-S. This sensor was successfully used to detect FIP and FIP-S in eggs and water samples with good recoveries of 90%-106.6%.

Benzotriazol-1-yl-sulfonyl azide for diazotransfer and preparation of azidoacylbenzotriazoles.

Benzotriazol-1-yl-sulfonyl azide, a new crystalline, stable, and easily available diazotransfer reagent provides N-(α-azidoacyl)benzotriazoles convenient for N-, O-, C- and S-acylations. The efficient syntheses of various amides, azido protected peptides, esters, ketones and thioesters is reported together with a wide range of azides (including α-azido acids from α- amino acids in partially aqueous conditions) and diazo compounds.

Study of Short Peptide Adsorption on Solution Dispersed Inorganic Nanoparticles Using Depletion Method.

Fundamentals of inorganic-organic interactions are critically important in the discovery and development of novel biointerfaces amenable for utilization in biotechnology and medicine. Recent studies indicate that proteins interact with surfaces through limited adsorption sites. Protein fragments such as amino acids and peptides can be used for interaction modeling between complex biological macromolecules and inorganic surfaces. During the last three decades, many valid and sensitive methods have been developed to measure the physical chemistry fundamentals of those interactions: isothermal titration calorimetry (ITC), surface plasmon resonance (SPR), quartz crystal microbalance (QCM), total internal reflection fluorescence (TIRF), and attenuated total reflectance spectroscopy (ATR). The simplest and most affordable technique for the measurement of adsorption is the depletion method, where the change in sorbate concentration (depletion) after contact with solution-dispersed sorbent is calculated and assumed to be adsorbed. Adsorption isotherms based on depletion data provide all basic physicochemical data. However, adsorption from solutions requires longer equilibration times due to kinetic restrictions and sorbents with a high specific surface area, making it almost inapplicable to macroscopic fixed plane surfaces. Moreover, factors such as the instability of sols, nanoparticle aggregates, sorbent crystallinity, nanoparticle size distribution, pH of the solution, and competition for adsorption, should be considered while studying adsorbing peptides. Depletion data isotherm construction provides comprehensive physical chemistry data for literally every soluble sorbate yet remains the most accessible methodology, as it does not require expensive setups. This article describes a basic protocol for the experimental study of peptide adsorption on inorganic oxide and covers all critical points that affect the process.

One-pot synthesis of 5-phenylimino, 5-thieno or 5-oxo-1,2,3-dithiazoles and evaluation of their antimicrobial and antitumor activity.

We here report the synthesis and biological evaluation of rare 4-substituted-5-phenylimino, 5-thieno- and 5-oxo-1,2,3-dithiazoles. Dithiazoles were selectively obtained in moderate to high yields (25-73%) via a one-pot reaction from various ethanoneoximes with sulfur monochloride, pyridine in acetonitrile followed by treatment by corresponding nucleophiles (aniline, thioacetamide and formic acid). All the synthesized compounds were screened for their antibacterial (against bacteria Escherichia coli, Salmonellaenterica serovar Typhimurium, Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus faecalis, Bacillus cereus and Listeria inocua), antifungal (against pathogenic strains Candida albicans, Candida glabrata, Candida tropicalis and Issatchenkia orientalis) and antitumor (on human cell lines MCF-7 and MDA-MB-231) activity. 4-(2-Pyridinyl)-5H-1,2,3-dithiazole-5-thione and 4-ethylcarboxyl-5H-1,2,3-dithiazole-5-thione (5d, 5h) that are active against Gram-positive bacteria are significantly active against fungi. 4-(2-Benzofuranyl)-5-phenylimino-5H-1,2,3-dithiazole (4e) exerts antiproliferative activity.

MS-Monitored Conjugation of Poly(ethylene glycol) Monomethacrylate to RGD Peptides.

Development of biologically active polymers is an active area of research due to their applications in varied and diverse fields of biomedical research: cell adhesion, tissue proliferation, and drug delivery. Recent advances in chemical modification allow fine-tuning of the properties of biomedical polymers to improve their applications: blood circulation half-life, stimuli-responsive degradation, site-specific targeting, drug loading, etc. In this article, convergent synthesis of polymerizable macromonomers bearing a site-specific ligand (RGD peptide) using a low molecular weight MA-poly(ethylene glycols) (PEGs) is presented. The method affords macromonomers useful as the starting materials to produce biomedical polymers. We found matrix assisted laser desorption/ionization mass spectromerty convenient in monitoring the conjugation process via step-by-step following of PEG modification.