Electrolytes, SEI Formation, and Binders: A Review of Nonelectrode Factors for Sodium-Ion Battery Anodes.

Through intense effort in recent years, knowledge of Na-ion batteries has been advanced significantly, pertaining to electrodes. Often, such progress has been accompanied by using a convenient choice of electrolyte or binder. Nevertheless, it has been witnessed that "external" factors to electrodes, such as electrolytes, solid electrolyte interphase, and binders, affect the functions of electrodes profoundly. And generally, certain types of electrodes favor some electrolytes or binders. With a rapidly increasing number of publications in the area, trends in terms of electrolytes and binders are possibly exploitable. Unfortunately, the field has yet to see a review article that devotes itself to these nonelectrode aspects of Na-ion batteries. Here, the gap is filled by conducting a comprehensive review of these nonelectrode external factors, especially by looking into their correlation with electrochemical properties, such as cycle life, and first cycle coulombic efficiency. Not only are the representative reports reviewed, but also quantitative analyses on the database that are constructed are provided. With such analyses, some new data-driven perspectives are postulated, which are of great value to the community.

Mg-Ion Battery Electrode: An Organic Solid's Herringbone Structure Squeezed upon Mg-Ion Insertion.

We report that crystalline 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA), an organic solid, is highly amenable to host divalent metal ions, i.e., Mg2+ and Ca2+, in aqueous electrolytes, where the van der Waals structure is intrinsically superior in hosting charge-dense ions. We observe that the divalent nature of Mg2+ causes unique squeezing deformation of the electrode structure, where it contracts and expands in different crystallographic directions when hosting the inserted Mg-ions. This phenomenon is revealed experimentally by ex situ X-ray diffraction and transmission electron microscopy, and is investigated theoretically by first-principles calculations. Interestingly, hosting one Mg2+ ion requires the coordination from three PTCDA molecules in adjacent columns of stacked molecules, which rotates the columns, thus reducing the (011) spacing but increasing the (021) spacing. We demonstrate that a PTCDA Mg-ion electrode delivers a reversible capacity of 125 mA h g-1, which may include a minor contribution of hydronium storage, a good rate capability by retaining 75 mA h g-1 at 500 mA g-1 (or 3.7 C), and a stable cycle life. We also report Ca2+ storage in PTCDA, where a reversible capacity of over 80 mA h g-1 is delivered.

Na-Ion Battery Anodes: Materials and Electrochemistry.

The intermittent nature of renewable energy sources, such as solar and wind, calls for sustainable electrical energy storage (EES) technologies for stationary applications. Li will be simply too rare for Li-ion batteries (LIBs) to be used for large-scale storage purposes. In contrast, Na-ion batteries (NIBs) are highly promising to meet the demand of grid-level storage because Na is truly earth abundant and ubiquitous around the globe. Furthermore, NIBs share a similar rocking-chair operation mechanism with LIBs, which potentially provides high reversibility and long cycling life. It would be most efficient to transfer knowledge learned on LIBs during the last three decades to the development of NIBs. Following this logic, rapid progress has been made in NIB cathode materials, where layered metal oxides and polyanionic compounds exhibit encouraging results. On the anode side, pure graphite as the standard anode for LIBs can only form NaC64 in NIBs if solvent co-intercalation does not occur due to the unfavorable thermodynamics. In fact, it was the utilization of a carbon anode in LIBs that enabled the commercial successes. Anodes of metal-ion batteries determine key characteristics, such as safety and cycling life; thus, it is indispensable to identify suitable anode materials for NIBs. In this Account, we review recent development on anode materials for NIBs. Due to the limited space, we will mainly discuss carbon-based and alloy-based anodes and highlight progress made in our groups in this field. We first present what is known about the failure mechanism of graphite anode in NIBs. We then go on to discuss studies on hard carbon anodes, alloy-type anodes, and organic anodes. Especially, the multiple functions of natural cellulose that is used as a low-cost carbon precursor for mass production and as a soft substrate for tin anodes are highlighted. The strategies of minimizing the surface area of carbon anodes for improving the first-cycle Coulombic efficiency are also outlined, where graphene oxide was employed as dehydration agent and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) was used to unzip wood fiber. Furthermore, surface modification by atomic layer deposition technology is introduced, where we discover that a thin layer of Al2O3 can function to encapsulate Sn nanoparticles, leading to a much enhanced cycling performance. We also highlight recent work about the phosphorene/graphene anode, which outperformed other anodes in terms of capacity. The aromatic organic anode is also studied as anode with very high initial sodiation capacity. Furthermore, electrochemical intercalation of Na ions into reduced graphene oxide is applied for fabricating transparent conductors, demonstrating the great feasibility of Na ion intercalation for optical applications.

Hydronium-Ion Batteries with Perylenetetracarboxylic Dianhydride Crystals as an Electrode.

We demonstrate for the first time that hydronium ions can be reversibly stored in an electrode of crystalline 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA). PTCDA exhibits a capacity of 85 mAh g-1 at 1 A g-1 after an initial conditioning process. Ex situ X-ray diffraction revealed reversible and significant structure dilation upon reduction of PTCDA in an acidic electrolyte, which can only be ascribed to hydronium-ion intercalation. The lattice expansion upon hydronium storage was theoretically explored by first-principles density functional theory (DFT) calculations, which confirmed the hydronium storage in PTCDA.

New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon.

Nongraphitizable carbon, also known as hard carbon, is considered one of the most promising anodes for the emerging Na-ion batteries. The current mechanistic understanding of Na-ion storage in hard carbon is based on the "card-house" model first raised in the early 2000s. This model describes that Na-ion insertion occurs first through intercalation between graphene sheets in turbostratic nanodomains, followed by Na filling of the pores in the carbon structure. We tried to test this model by tuning the sizes of turbostratic nanodomains but revealed a correlation between the structural defects and Na-ion storage. Based on our experimental data, we propose an alternative perspective for sodiation of hard carbon that consists of Na-ion storage at defect sites, by intercalation and last via pore-filling.

Toward Higher Capacities of Hydrocarbon Cathodes in Dual-Ion Batteries.

We report the electrochemical anion storage properties of a group of molecular solids of polycyclic aromatic hydrocarbons (PAHs): coronene, perylene, and triphenylene. We discover an interesting trend of progressively lower potentials for these three molecular solids. Our DFT calculations reveal that the inserted PF6- anions preferably bind with the edge sites of the coronene molecules as opposed to being sandwiched between two coronene molecular planes. For smaller PAHs, the more edge sites in the solids may facilitate higher capacity values. However, small PAHs do face a greater challenge of dissolution in the nonaqueous electrolyte, which affects the cycling stability.

Hard carbon anodes of sodium-ion batteries: undervalued rate capability.

The rate capability of hard carbon has long been underestimated in prior studies that used carbon/Na two-electrode half-cells. Through a three-electrode cell setup, we discover that it is the overpotential of the sodium counter electrode that drives the half-cells to the lower cutoff potential prematurely during hard carbon sodiation, particularly at high current rates, which prevents the hard carbon anode from being fully sodiated.

Electrochemically Expandable Soft Carbon as Anodes for Na-Ion Batteries.

Na-ion batteries (NIBs) have attracted great attention for scalable electrical energy storage considering the abundance and wide availability of Na resources. However, it remains elusive whether carbon anodes can achieve the similar scale of successes in Na-ion batteries as in Li-ion batteries. Currently, much attention is focused on hard carbon while soft carbon is generally considered a poor choice. In this study, we discover that soft carbon can be a high-rate anode in NIBs if the preparation conditions are carefully chosen. Furthermore, we discover that the turbostratic lattice of soft carbon is electrochemically expandable, where d-spacing rises from 3.6 to 4.2 Å. Such a scale of lattice expansion only due to the Na-ion insertion was not known for carbon materials. It is further learned that portions of such lattice expansion are highly reversible, resulting in excellent cycling performance. Moreover, soft carbon delivers a good capacity at potentials above 0.2 V, which enables an intrinsically dendrite-free anode for NIBs.

Low-surface-area hard carbon anode for na-ion batteries via graphene oxide as a dehydration agent.

Na-ion batteries are emerging as one of the most promising energy storage technologies, particularly for grid-level applications. Among anode candidate materials, hard carbon is very attractive due to its high capacity and low cost. However, hard carbon anodes often suffer a low first-cycle Coulombic efficiency and fast capacity fading. In this study, we discover that doping graphene oxide into sucrose, the precursor for hard carbon, can effectively reduce the specific surface area of hard carbon to as low as 5.4 m(2)/g. We further reveal that such doping can effectively prevent foaming during caramelization of sucrose and extend the pyrolysis burnoff of sucrose caramel over a wider temperature range. The obtained low-surface-area hard carbon greatly improves the first-cycle Coulombic efficiency from 74% to 83% and delivers a very stable cyclic life with 95% of capacity retention after 200 cycles.

Facile synthesis of one-dimensional peapod-like Sb@C submicron-structures.

We demonstrate a novel synthetic route to fabricate a one-dimensional peapod-like Sb@C structure with disperse Sb submicron-particles encapsulated in carbon submicron-tubes. The synthetic route may well serve as a general methodology for fabricating carbon/metallic fine structures by thermally reducing their carbon-coated metal oxide composites.