Cobalt azide complexes with a tris(carbene)borate ligand scaffold.

The four-coordinate Co(II) complex, (azido-κN)[1,1,',1''-(phenylboranetriyl)tris(3-tert-butyl-1H-imidazol-2-ylidene)]cobalt(II), [Co(C27H38BN6)(N3)], (1), denoted PhB(t-BuIm)3CoN3, was prepared by the reaction of the corresponding chloride complex with NaN3. One-electron oxidation results in the isolation of the five-coordinate Co(III) complex, bis(azido-κN)[1,1,',1''-(phenylboranetriyl)tris(3-tert-butyl-1H-imidazol-2-ylidene)]cobalt(III), [Co(C27H38BN6)(N3)2], (2), denoted PhB(t-BuIm)3Co(N3)2. Attempts to prepare cobalt nitrides by thermolysis or photolysis of these complexes were unsuccessful.

N-O bond homolysis of an iron(II) TEMPO complex yields an iron(III) oxo intermediate.

The reaction of TEMPO with the iron(I) synthon PhB(MesIm)(3)Fe(COE) leads to formation of the κ(1)-TEMPO complex PhB(MesIm)(3)Fe(TEMPO). Structural and spectroscopic data establish the complex contains divalent iron bound to a nitroxido anion and is isoelectronic to an iron(II) peroxo complex. Thermolysis of the complex results in N-O bond homolysis, leading to the formation of an iron(III) oxo intermediate. The oxo intermediate is active in oxygen atom transfer reactions and can be trapped by the triphenylmethyl radical to give the iron(II) alkoxo complex PhB(MesIm)(3)Fe(OCPh(3)).

Evaluation of materials for iodine and technetium immobilization through sorption and redox-driven processes.

Radioactive iodine-129 (129I) and technetium-99 (99Tc) pose a risk to groundwater due to their long half-lives, toxicity, and high environmental mobility. Based on literature reviewed in Moore et al. (2019) and Pearce et al. (2019), natural and engineered materials, including iron oxides, low-solubility sulfides, tin-based materials, bismuth-based materials, organoclays, and metal organic frameworks, were tested for potential use as a deployed technology for the treatment of 129I and 99Tc to reduce environmental mobility. Materials were evaluated with metrics including capacity for IO3- and TcO4- uptake, selectivity and long-term immobilization potential. Batch testing was used to determine IO3- and TcO4- sorption under aerobic conditions for each material in synthetic groundwater at different solution to solid ratios. Material association with IO3- and TcO4- was spatially resolved using scanning electron microscopy and X-ray microprobe mapping. The potential for redox reactions was assessed using X-ray absorption near edge structure spectroscopy. Of the materials tested, bismuth oxy(hydroxide) and ferrihydrite performed the best for IO3-. The commercial Purolite A530E anion-exchange resin outperformed all materials in its sorption capacity for TcO4-. Tin-based materials had high capacity for TcO4-, but immobilized TcO4- via reductive precipitation. Bismuth-based materials had high capacity for TcO4-, though slightly lower than the tin-based materials, but did not immobilize TcO4- by a redox-drive process, mitigating potential negative re-oxidation effects over longer time periods under oxic conditions. Cationic metal organic frameworks and polymer networks had high Tc removal capacity, with TcO4- trapped within the framework of the sorbent material. Although organoclays did not have the highest capacity for IO3- and TcO4- removal in batch experiments, they are available commercially in large quantities, are relatively low cost and have low environmental impact, so were investigated in column experiments, demonstrating scale-up and removal of IO3- and TcO4- via sorption, and reductive immobilization with iron- and sulfur-based species.

Formation of ammonia from an iron nitrido complex.

Radical ideas: Reaction of the iron(IV) nitrido complex [PhB(MesIm)(3)Fe[triple chemical bond]N] (see picture, Mes=2,4,6-Me(3)C(6)H(2)) with TEMPO-H (1-hydroxy-2,2,6,6-tetramethylpiperidine) results in high yields of ammonia and quantitative formation of [PhB(MesIm)(3)Fe(tempo)]. The mechanism likely involves hydrogen-atom transfer from TEMPO-H to the nitrido complex. Similar reaction with the triphenylmethyl radical yields [PhB(MesIm)(3)Fe[triple chemical bond]N--CPh(3)].

Thermodynamics of hydrogen atom transfer to a high-valent iron imido complex.

Thermodynamic investigations relevant to hydrogen atom transfer by the high-valent iron imido complex [LMesFe[triple bond]NAd]OTf have been undertaken. The complex is found to be weakly oxidizing by cyclic voltammetry (E1/2 = -0.98 V vs Cp2Fe+/Cp2Fe in MeCN). A combination of experimental and computational studies has been used to determine the acidity of LMesFe-N(H)Ad+ (pKa = 37 in MeCN), allowing the N-H BDFE (88(5) kcal/mol) to be calculated from a thermodynamic cycle. Consistent with this value, [LMesFe[triple bond]NAd]OTf reacts with 9,10-dihydroanthracene (C-H BDE = 78(1) kcal/mol) to form anthracene.

Structural and spectroscopic characterization of an electrophilic iron nitrido complex.

We have isolated and structurally characterized a terminal iron nitrido complex supported by a bulky tris(carbene)borate ligand. The electronic structure of this complex reveals that the a1 LUMO (formerly Fe(dz2)) is strongly stabilized by reduced antibonding interactions with the carbene sigma-donor ligands and configurational mixing (hybridization) with higher lying Fe 4s and 4p atomic orbitals. This unusual bonding interaction results in a low-lying Fe nitrido acceptor orbital (LUMO) that possesses electrophilic character. Reaction with PPh3 results in nitrogen atom transfer to the phosphine, supporting a reaction mechanism involving nucleophilic attack of the triphenylphosphine HOMO at the electrophilic LUMO of the iron nitrido complex.

Crystal structure and aqueous solubility of ammonium D-glucarate.

Ammonium D-glucarate, NH(4)(C(6)H(9)O(8)) [ammonium D-saccharate, NH(4)-SAC], has been synthesized, and its crystal structure solved by single-crystal X-ray diffraction methods. NH(4)-SAC crystallizes in the monoclinic space group P2(1) (#4) with cell parameters a = 4.8350(4) Angstroms, b = 11.0477(8) Angstroms, c = 16.7268(12) Angstroms, beta = 90.973(1) degrees, V = 894.34(12) Angstroms(3), Z = 3. The structure was refined by full-matrix least-squares on F(2) yielding final R-values (all data) R1 = 0.0353 and R(w)2 = 0.0870. The structure consists of alternating (NH(4))(+) and (C(6)H(11)O(6))(-) layers parallel to the bc plane. An extended network of N-H...O(SAC) and O(SAC)-H...O(SAC) hydrogen bonds provide the 3-D connectivity. The aqueous solubility (S(w)) has been shown to be pH independent at ambient conditions within the range 4.5 < pH < 10 with S(w) = 2.19 M/L, whose value is about a factor of two lower than that of the ammonium isosaccharate analogue.

Crystal structure of ammonium isosaccharate and aqueous solubility of ammonium and sodium isosaccharates.

Ammonium isosaccharate, C6H15NO6.H2O (NH4-ISA), has been synthesized and its crystal structure solved by single-crystal X-ray diffraction methods. NH4-ISA crystallizes in the monoclinic space group P2(1) (#4) with cell parameters a=8.6470(12)A, b=5.0207(7)A, c=9.8193(14)A, beta=91.643(3) degrees , V=426.12(10)A3, Z=2. The structure was refined by full-matrix least-squares on F2 yielding final R-values (all data) R1=0.0485 and Rw2=0.1104. The structure consists of alternating (NH4)+ and (C6H11O6)- layers parallel to the ab plane. An extended network of O-H...O intermolecular (ISA)...(ISA) hydrogen bonds links the (ISA)- anions within the ab plane, while the 3-D connectivity along the c-axis is provided only by (ISA-)...(NH4+)...(ISA-) hydrogen bonds. The aqueous solubility (Si, [ML(-1)]) of NH4- and Na-ISA has been shown to be pH independent at ambient conditions within the range 4.5

Crystal structure of sodium isosaccharate, NaC6H11O6 x H2O.

Sodium isosaccharate, NaC(6)H(11)O(6).H(2)O (Na-ISA), has been synthesized, and its crystal structure solved by single-crystal X-ray diffraction methods. Na-ISA crystallizes in the monoclinic space group P2(1) (#4) with cell parameters a = 9.2267(11) A, b = 5.0765(6) A, c = 9.7435(11) A, beta = 103.304(2) degrees, V = 444.13(9) A(3), Z = 2. The structure was refined by full-matrix least-squares on F2 yielding final R-values (all data) R1 = 0.0361 and Rw2 = 0.0935. The structure of Na-ISA consists of (C(6)H(11)O(6))(-) anions arranged in layers parallel to the bc plane. An extended network of O-H...O hydrogen bonds links the (ISA)(-) anions and the crystal water molecules. Each sodium atom is coordinated by four oxygen atoms belonging to four different (ISA)(-) anions and by one water molecule. The resulting NaO(5) polyhedra are linked by sharing common corners in zig-zag chains running parallel to the b-axis.

Templated Synthesis of Vanadium Borophosphate Cluster Anions.

Hydrothermal synthesis provides new vanadium borophosphates. BP2O10 trimers and V2O8 dimers are connected by common oxygen atoms to give a building unit of composition (VO)2BP2O10. Four-, five-, and six-rings are formed by further connection of these units; the first case is shown schematically. The ring size of the anion is determined by the size of the specific cation used in the synthesis.

Oxidation of the tris(carbene)borate complex PhB(MeIm)3MnI(CO)3 to MnIV[PhB(MeIm)3]2(OTf)2.

Reaction of the tris(carbene)borate ligand PhB(MeIm)3- with [Mn(CO)3(tBuCN)Br]2 leads to the manganese(I) tricarbonyl complex PhB(MeIm)3Mn(CO)3. In contrast to related complexes that are air-stable, PhB(MeIm)3Mn(CO)3 is O2-sensitive and is converted to a homoleptic MnIV complex. IR and cyclic voltammetry measurements of these complexes establish the exceptionally strong donating nature of the tris(carbene)borate ligand.

Copper-linked hexaniobate lindqvist clusters-variations on a theme.

Four new one-dimensional materials and one dimer complex based on the linkage of [Nb6O19] clusters and [CuLx] (L=ethylenediamine (en), NH3, H2O) assemble under ambient conditions. These phases include the following: Rb4[Cu(en)2(H2O)2]3[(Nb6O19H2)2Cu(en)2].24H2O (1), space group P; [Cu(en)2(H2O)2]2[(Nb6O19H2)Cu(en)2].14H2O (2), space group P; Rb2[Cu(NH3)2(H2O)4][Cu(NH3)4(H2O)2]2{[Nb6O19][Cu(NH3)]2}(2).6H2O (3), space group P; {[Nb6O19][Cu(NH3)2(H2O)]2[Cu(H2O)4]2}.3H2O (4), space group P2/n; and {[Nb6O19][Cu(NH3)2(H2O)]2[Cu(H2O)4]2} (5), space group C2/m. All structures have been solved by single-crystal methods, and compounds 1-5 were characterized by thermogravimetric analysis, Fourier transform IR, chemical analysis, and magnetic measurements. It has been demonstrated that the conformation, charge, and geometry of the [Nb6O19]-[CuLx] chains can be modulated by varying the type and amount of the [CuLx]2+ species. The charge balance is provided by mixed Rb+/[CuLx]2+ or [CuLx]2+ cations only for structures 1-3, whereas 4 and 5 are neutral chains with no counterions. There are weak antiferromagnetic Cu2+-Cu2+ interactions in all phases. Compounds 2-5 represent the first examples in which the [Nb6O19] Lindqvist ion forms extended solids rather than dimers or decorated monomers when reacted with transition-metal, cationic complexes.

Removing the sting from the tail: reversible protonation of scorpionate ligands in cobalt(II) tris(carbene)borate complexes.

Low-temperature deprotonation of the phenylborane dications, PhB(RIm)3OTf2 (R = tBu, Mes), followed by in situ reaction with CoCl2(thf)1.5, results in the formation of the four-coordinate complexes, kappa3-PhB(RIm)3CoCl, in which the metal is supported by tripodal N-heterocyclic carbene-based ligands. The chloride complexes are exceptionally sensitive to acid and can be reversibly protonated to form the zwitterions kappa2-{PhB(RIm)2(RIm.H)}CoCl2. This unexpected reactivity is attributed to the highly basic nature of the tris(carbene)borate ligands. Reaction of the chloride complexes with methylating reagents results in products that depend on the N-heterocyclic carbene substituent. For R = tBu, the four-coordinate high-spin complex, kappa3-PhB(tBuIm)3CoMe, is formed, while for R = Mes, reduction to a multitude of complexes occurs.

Copper(II) complexes of the beta-blocker pindolol: properties, structure, biological activity.

The complex formation between copper(II) and the antihypertensive drug pindolol (HPin) was studied both in aqueous and methanolic media. Two complexes are formed at different metal-to-ligand molar ratios. The mononuclear complex Cu(Pin)2(HPin)2 contains two ligands in an anionic bidentate form and two--in a neutral form bound monodentately. The second complex Cu2Pin2Cl2 is dinuclear and its structure was determined by X-ray diffraction. The compound crystallizes in the monoclinic group C2/c with cell components a = 14.4998(13)A, b = 18.511(2)A, c = 14.2982(13)A, alpha = 90 degrees, beta = 109.556(2) degrees, gamma = 90 degrees and Z = 12 at 293K. A pharmacological study on the influence of pindolol and its mononuclear complex on the heart rate of rats was performed. The complex is more active and has a longer effect in comparison with the pure non-coordinated pindolol in equitoxic doses.