RESUMO
The synthesis of hybrid metallic-dielectric substrates as reliable SERS platforms relies on core-shell nanoparticles, obtained by wet chemistry, with an outer dielectric shell composed of SiO2 or TiO2. Apart from the shell composition, the nanoparticle density and aggregation type strongly affect the surface-enhanced SERS. Going beyond a single layer by building random aggregates of hybrid NPs would result in a step forward in the production of reliable hybrid SERS platforms. Here we achieve the fabrication of a 3D nanogranular film of Ag metallic cores not fully enclosed in a TiO2 capping layer, defined as a Ag@TiO2 quasi-shell-isolated Raman substrate (Ag@TiO2 QuaSIRS) by an environmentally friendly gas phase synthesis technique (SCBD). The Ag core drives the electromagnetic enhancement with plasmonic hotspots while the TiO2 shell passivates it and leads to different possible surface functionalization. The SERS capabilities of the Ag@TiO2 QuaSIRS peak at a film thickness of 60 nm providing a detection limit of 10-9 M concentration for Methylene Blue at 632.81 nm. The importance of the nanogranular 3D morphology is evidenced by the very good detection of analytes dispersed in aqueous solutions, since the liquid can penetrate the pores hence exploiting most of the plasmonic hotspots present in the film. The versatility of SCBD to deposit such reliable hybrid SERS platforms by a single step at room temperature over different substrates provides an opportunity to design a new generation of hybrid SERS-active substrates based on hybrid nanoparticles.
RESUMO
Light-to-heat conversion in non-plasmonic, high refractive index nanoantennas is a key topic for many applications, including Raman sensing, laser writing, nanofabrication and photo-thermal therapy. However, heat generation and propagation in non-plasmonic antennas is increasingly debated and contradictory results have been reported so far. Here we report a finite element analysis of the steady-state temperature distribution and heat flow in SiO2/Si core/shell systems (silicon nanoshells) irradiated with different continuous wave lasers (λ = 532, 633 and 785 nm), under real working conditions. The complex interplay among the optical properties, morphology, degree of crystallinity of the nanoshells, thickness dependence of thermal conductivity and interactions with the substrate has been elucidated. This study reveals that all of these parameters can be appropriately combined for obtaining either stable nanoshells for Raman sensing or highly efficient sources of local heating. The optimal balance between thermal stability and field enhancement was found for crystalline Si shell layers with thicknesses ranging from 40 to 60 nm, irradiated by a NIR laser source. On the other hand, non-conformal amorphous or crystalline shell layers with a thickness >50 nm can reach a very high local temperature (above 1000 K) when irradiated with a low power density (less than 1 mW µm-2) laser sources. This work provides a general approach for an extensive investigation of the opto-thermal properties of high-index nanoantennas.
RESUMO
This paper reports an experimental investigation of surface-enhanced Raman scattering in high-density Si nanowire arrays obtained by electroless etching. A direct relationship between light trapping capabilities of Si nanowires and enhanced Raman scattering was demonstrated. Optimized arrays allowed for a remarkable increase of Raman sensitivity in comparison to reference planar samples. As a result, the detection limit of molecular probes under resonant excitation (e.g. methylene blue) can be extended by three orders of magnitude. In addition, continuous ultrathin films, that cannot be analyzed in conventional Raman experiments, are made detectable. In the case of anatase thin films, the detection limit of 5 nm was reached. Raman spectra of Si/TiO2 core/shell heterostructures demonstrate that the enhanced field resulting from surface multiple scattering is characterized by a large spatial extension (about fifty nanometers), making these materials a potential alternative to plasmonic metals for SERS experiments.
RESUMO
Silicon is one of the most interesting candidates for plasmon-free surface-enhaced Raman scattering (SERS), because of its high-refractive index and thermal stability. However, here we demonstrate that the alleged thermal stability of silicon nanoshells irradiated by conventional Raman laser cannot be taken for granted. We investigated the opto-thermal behavior of SiO2/Si core/shell microbeads (Si-rex) irradiated with three common Raman laser sources (λ = 532, 633, 785 nm) under real working conditions. We obtained an experimental proof of the critical role played by bead size and aggregation in heat and light management, demonstrating that, in the case of strong opto-thermal coupling, the temperature can exceed that of the melting points of both core and shell components. In addition, we also show that weakly coupled beads can be utilized as stable substrates for plasmon-free SERS experiments.
RESUMO
Biosensing based on nanophotonic structures has shown a great potential for cost-efficient, high-speed and compact personal medical diagnostics. While plasmonic nanosensors offer high sensitivity, their intrinsically restricted resonance quality factors and strong heating due to metal absorption impose severe limitations on real life applications. Here, we demonstrate an all-dielectric sensing platform based on silicon nanodisks with strong optically-induced magnetic resonances, which are able to detect a concentration of streptavidin of as low as 10-10 M (mol L-1) or 5 ng mL-1, thus pushing the current detection limit by at least two orders of magnitudes. Our study suggests a new direction in biosensing based on bio-compatible, non-toxic, robust and low-loss dielectric nanoresonators with potential applications in medicine, including disease diagnosis and drug detection.
Assuntos
Técnicas Biossensoriais , Nanotecnologia , Silício , Estreptavidina/análise , Limite de Detecção , MetaisRESUMO
SiO2/TiO2 core/shell beads (T-rex) were designed, fabricated and tested for Raman detection of environmental CO2 under real-working conditions, as those encountered, for example, in solar-to-fuel conversion reactions. The exploitation of light trapping and morphology dependent resonances was crucial for extending the limit of detection of CO2 adsorbed on TiO2 surfaces. T-rex beads allowed for achieving surface enhanced Raman scattering (SERS) without using plasmonic metals showing high-efficiency, fast response and reproducibility in CO2 detection in both air and solvents. The dependence of SERS activity on Mie-type resonances was investigated through a systematic comparison of experimental data and numerical simulations, demonstrating that T-rex beads can be tailored for the detection of gaseous environmental pollutants on the basis of simple, Mie-scattering based calculations. Three-dimensional T-rex colloidal crystals were also successfully tested in precise, in situ, real time detection of CO2 as a function of different temperature-sweep cycles.
RESUMO
SiO2/TiO2 core/shell (T-rex) beads were exploited as "all-in-one" building-block materials to create analytical assays that combine plasmon-free surface enhanced Raman scattering (SERS) and surface assisted laser desorption/ionization (SALDI) mass spectrometry (RaMassays). Such a multi-modal approach relies on the unique optical properties of T-rex beads, which are able to harvest and manage light in both UV and Vis range, making ionization and Raman scattering more efficient. RaMassays were successfully applied to the detection of small (molecular weight, M.W. <400 Da) molecules with a key relevance in biochemistry and pharmaceutical analysis. Caffeine and cocaine were utilized as molecular probes to test the combined SERS/SALDI response of RaMassays, showing excellent sensitivity and reproducibility. The differentiation between amphetamine/ephedrine and theophylline/theobromine couples demonstrated the synergistic reciprocal reinforcement of SERS and SALDI. Finally, the conversion of L-tyrosine in L-DOPA was utilized to probe RaMassays as analytical tools for characterizing reaction intermediates without introducing any spurious effects. RaMassays exhibit important advantages over plasmonic nanoparticles in terms of reproducibility, absence of interference and potential integration in multiplexed devices.