Electric Potential Induced Prevention and Removal of an Algal Biofoulant from Planar SERS Substrates.

Ulva zoospores are widespread marine macroalgae and a common organism found in biofouling communities due to their strong adhesive properties and quick settlement times. Using Ulva as a model organism, a strategy is presented where direct-current (DC) electric potentials are applied in conjunction with surface-enhanced Raman spectroscopy (SERS) to characterize, remove, and prevent Ulva from forming a biofilm on gold-capped nanopillar SERS substrates. Experiments were conducted within a poly(tetrafluoroethylene) (PTFE) flow channel device where the SERS substrates were used as an electrode. Ulva density, determined in situ by SERS and ex situ by electron and fluorescence microscopy, decreased under successively increasing low negative potentials up to -1.0 V. The presence of damaged Ulva suggests that the applied potential led to spore rupture. At the highest negative applied potential (-1.0 V), microparticles containing copper, which is known for its antimicrobial properties, were associated with Ulva on the SERS substrate and the lowest Ulva density was observed. These findings indicate that (1) SERS can be employed to study biofilm formation on nanostructured metal surfaces and (2) applying low-voltage electric potentials may be used to control Ulva biofouling on SERS marine sensors.

Replacement per- and polyfluoroalkyl substances (PFAS) are potent modulators of lipogenic and drug metabolizing gene expression signatures in primary human hepatocytes.

Per- and polyfluoroalkyl substances (PFAS) are a class of environmental toxicants, and some, such as perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), have been associated with hepatic steatosis in rodents and monkeys. It was hypothesized that perfluorosulfonic acids (C4, 6, 8), perfluorocarboxylic acids (C4-14), perfluoro(2-methyl-3-oxahexanoic) acid (HFPO-DA), 1H, 1H, 2H, 2H-perfluorooctanesulfonic acid (6:2 FTS) along with 3 PFOS precursors could induce expression of lipid metabolism genes and lipid deposition in human hepatocytes. Five-donor pooled cryopreserved human hepatocytes were cultured and treated with 0.1% DMSO vehicle or various PFAS (0.25 to 25 µM) in media. After a 48-h treatment, mRNA transcripts related to lipid transport, metabolism, and synthesis were measured using a Quantigene Plex assay. After 72-h treatments, hepatocytes were stained with Nile Red dye to quantify intracellular lipids. Overall, PFAS were transcriptionally active at 25 µM. In this model, lipid accumulation was not observed with C8-C12 treatments. Shorter chain PFAS (C4-C5), 6:2 FTS, and PFOS precursor, metFOSA, induced significant liver lipid accumulation, and gene activation at lower concentrations than legacy PFAS. In summary short chain PFAS and other alternative PFAS were more potent gene inducers, and potential health effects of replacement PFAS should be critically evaluated in humans.

Using Microemulsion Phase Behavior as a Predictive Model for Lecithin-Tween 80 Marine Oil Dispersant Effectiveness.

Marine oil dispersants typically contain blends of surfactants dissolved in solvents. When introduced to the crude oil-seawater interface, dispersants facilitate the breakup of crude oil into droplets that can disperse in the water column. Recently, questions about the environmental persistence and toxicity of commercial dispersants have led to the development of "greener" dispersants consisting solely of food-grade surfactants such as l-α-phosphatidylcholine (lecithin, L) and polyoxyethylenated sorbitan monooleate (Tween 80, T). Individually, neither L nor T is effective at dispersing crude oil, but mixtures of the two (LT blends) work synergistically to ensure effective dispersion. The reasons for this synergy remain unexplained. More broadly, an unresolved challenge is to be able to predict whether a given surfactant (or a blend) can serve as an effective dispersant. Herein, we investigate whether the LT dispersant effectiveness can be correlated with thermodynamic phase behavior in model systems. Specifically, we study ternary "DOW" systems comprising LT dispersant (D) + a model oil (hexadecane, O) + synthetic seawater (W), with the D formulation being systematically varied (across 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 L:T weight ratios). We find that the most effective LT dispersants (60:40 and 80:20 L:T) induce broad Winsor III microemulsion regions in the DOW phase diagrams (Winsor III implies that the microemulsion coexists with aqueous and oil phases). This correlation is generally consistent with expectations from hydrophilic-lipophilic deviation (HLD) calculations, but specific exceptions are seen. This study then outlines a protocol that allows the phase behavior to be observed on short time scales (ca. hours) and provides a set of guidelines to interpret the results. The complementary use of HLD calculations and the outlined fast protocol are expected to be used as a predictive model for effective dispersant blends, providing a tool to guide the efficient formulation of future marine oil dispersants.

Does the Solvent in a Dispersant Impact the Efficiency of Crude-Oil Dispersion?

Dispersants, used in the mitigation of oil spills, are mixtures of amphiphilic molecules (surfactants) dissolved in a solvent. The recent large-scale use of dispersants has raised environmental concerns regarding the safety of these materials. In response to these concerns, our lab has developed a class of eco-friendly dispersants based on blends of the food-grade surfactants, soy lecithin (L) and Tween 80 (T), in a solvent. We have shown that these "L/T dispersants" are very efficient at dispersing crude oil into seawater. The solvent for dispersants is usually selected based on factors like toxicity, volatility, or viscosity of the overall mixture. However, with regard to the dispersion efficiency of crude oil, the solvent is considered to play a negligible role. In this paper, we re-examine the role of solvent in the L/T system and show that it can actually have a significant impact on the dispersion efficiency. That is, the dispersion efficiency can be altered from poor to excellent simply by varying the solvent while keeping the same blend of surfactants. We devise a systematic procedure for selecting the optimal solvents by utilizing Hansen solubility parameters. The optimal solvents are shown to have a high affinity for crude oil and limited hydrophilicity. Our analysis further enables us to identify solvents that combine high dispersion efficiency, good solubility of the L/T surfactants, a low toxicity profile, and a high flash point.

Attachment of Alcanivorax borkumensis to Hexadecane-In-Artificial Sea Water Emulsion Droplets.

Alcanivorax borkumensis (AB) is a marine bacterium that dominates bacterial communities around many oil spills because it enzymatically degrades the oil while using it as a nutrient source. Several dispersants have been used to produce oil-in-water emulsions following a spill. Compared to surface slicks, the additional oil-water surface area produced by emulsification provides greater access to the oil and accelerates its degradation. We deliberately cultured AB cells using hexadecane as the only nutrient source. We then examined the first critical step of the biodegradation process, the attachment of these AB cells to hexadecane-water interfaces, using fluorescence microscopy and cryogenic scanning electron microscopy. The hexadecane-in-artificial sea water (ASW) emulsions were produced by gentle shaking and were stabilized either by AB alone, by Corexit 9500, by Tween 20, or by carbon black particles. When no dispersants were used, AB stabilizes the emulsion, and bacterial cells attach to the hexadecane droplets within the first 3 days. When Corexit 9500 was used as the dispersant, AB did not attach to the hexadecane droplets over 3 days, and many AB cells in the aqueous phase appeared dead. Only limited attachment was observed after 7 days. No AB attachment was observed over 3 days when Tween 20 was used as the dispersant. However, the bacteria used Tween 20 in the ASW as a nutrient. Large amounts of AB attached to carbon black stabilized hexadecane droplets within 3 days. An analysis that accounts for van der Waals and electrostatic interactions is unable to predict all of these observations, indicating that the attachment of AB to the hexadecane is a complex phenomenon that goes beyond simple physiochemical effects. While these experiments do not mimic conditions in the open ocean where the large amount of water dilutes any emulsion stabilizer, they provide important insights on bacteria adhesion to oil, a critical step in the oil degradation process following a marine spill.

Surface Activity of Poly(ethylene glycol)-Coated Silver Nanoparticles in the Presence of a Lipid Monolayer.

We have investigated the surface activity of poly(ethylene glycol) (PEG)-coated silver nanoparticles (Ag-PEG) in the presence or absence of lipid monolayers comprised of monounsaturated dioleoylphosphocholine and dioleoylphosphoglycerol (DOPC/DOPG; 1:1 mol ratio). Dynamic measurements of surface pressure demonstrated that Ag-PEG were surface-active at the air/water interface. Surface excess concentrations suggested that at high Ag-PEG subphase concentrations, Ag-PEG assembled as densely packed monolayers in the presence and absence of a lipid monolayer. The presence of a lipid monolayer led to only a slight decrease in the excess surface concentration of Ag-PEG. Surface pressure-area isotherms showed that in the absence of lipids Ag-PEG increased the surface pressure up to 45 mN m-1 upon compression before the Ag-PEG surface layer collapsed. Our results suggest that surface activity of Ag-PEG was due to hydrophobic interactions imparted by a combination of the amphiphilic polymer coating and the hydrophobic dodecanethiol ligands bound to the Ag-PEG surface. With lipid present, Ag-PEG + lipid surface pressure-area (π-A) isotherms reflected Ag-PEG incorporation within the lipid monolayers. At high Ag-PEG concentrations, the π-A isotherms of the Ag-PEG + lipid films closely resembled that of Ag-PEG alone with a minimal contribution from the lipids present. Analysis of the subphase silver (Ag) and phosphorus (P) concentrations revealed that most of the adsorbed material remained at the air/lipid/water interface and was not forced into the aqueous subphase upon compression, confirming the presence of a composite Ag-PEG + lipid film. While interactions between "water-soluble" nanoparticles and lipids are often considered to be dominated by electrostatic interactions, these results provide further evidence that the amphiphilic character of a nanoparticle coating can also play a significant role.

Phospholipid Bilayer Softening Due to Hydrophobic Gold Nanoparticle Inclusions.

Liposome-nanoparticle assemblies (LNAs) are vital in the context of novel targeted drug-delivery systems, in addition to investigating nanoparticle-lipid bilayer interactions. Quantifying membrane structural properties and dynamics in presence of nanoparticle inclusions provides a simple model to elucidate nanoparticle effects on membrane biophysical properties. We present experimental evidences of bilayer softening due to small hydrophobic gold nanoparticle inclusions. LNA structure has been investigated by a combination of cryo-transmission electron microscopy, dynamic light scattering, and small-angle neutron scattering. Neutron spin echo spectroscopy demonstrated a remarkable ∼15% bending modulus decrease for LNAs relative to pure liposomes. Clear dependence of bending modulus on gold nanoparticle diameter and concentration was observed from our observations. Our findings point toward local bilayer fluidization by nanoparticle inclusions leading to an overall bilayer softening. These findings add valuable information to liposomal drug-delivery vehicle design and membrane biophysics research.

Tuning the Multifunctionality of Iron Oxide Nanoparticles Using Self-Assembled Mixed Lipid Layers.

We present an approach to tuning the multifunctionality of iron oxide nanoparticles (IONs) using mixed self-assembled monolayers of cationic lipid and anionic polyethylene glycol (PEG) lipid. By forming stable, monodispersed lipid-coated IONs (L-IONs) through a solvent-exchange technique, we were able to demonstrate the relationship between surface charge, the magnetic transverse relaxivity (r2 from T2-weighted images), and the binding capacity of small interfering ribonucleic acids (siRNAs) as a function of the cationic-to-anionic (PEG) lipid ratio. These properties were controlled by the cationic charge and the PEG conformation; relaxivity and siRNA binding could be varied in the mushroom and brush regimes but not at high brush densities. In vitro results combining cell viability, uptake, and transfection efficiency using HeLa cells suggest that the functional physicochemical and biological properties of L-IONs may be best achieved using catanionic lipid coatings near equimolar ratios of cationic to anionic PEG-lipids.

Near-Infrared Responsive Gold-Layersome Nanoshells.

Anionic liposomes coated with cationic polyelectrolyte poly-l-lysine (PLL), or layersomes, were used as soft, self-assembled templates for synthesizing gold nanoshells that absorb near-infrared radiation. The gold nanoshells were formed using two techniques: (a) direct reduction of tetrachloroauric acid on the layersomes and (b) the reduction of a tetrachloroauric acid/potassium carbonate "growth" solution on nanosized gold seeds bound to the surface of layersomes. The resulting structures were characterized by transmission and scanning electron microscopy and visible-near-infrared spectroscopy. Direct reduction produced discrete gold nanoparticles on the layersomes. The slower reduction from the growth solution on the gold seeds resulted in more complete shells. The absorption spectra of these suspensions were sensitive to the synthesis method. The morphology of the gold shells was tuned for absorption at biologically safe and tissue-penetrating NIR wavelengths, and laser irradiation at 810 nm produced significant heat. These gold-layersome nanoshells have the potential to be used for photothermal therapy, photothermally mediated drug delivery, and biomedical imaging.

Effects of Membrane Defects and Polymer Hydrophobicity on Networking Kinetics of Vesicles.

The kinetics of clustering unilamellar vesicles induced by inverse Pluronics [poly(propylene oxide)m-poly(ethylene oxide)n-poly(propylene oxide)m, POm-EOn-POm] was investigated via experiments and molecular dynamic simulations. Two important factors for controlling the networking kinetics are the membrane defects, presumably located at the interfacial region between two lipid domains induced by acyl chain mismatch, and the polymer hydrophobicity. As expected, the clustering rate increases significantly with increasing bilayer defects on the membrane where the insertion of PPO is likely to take place because of the reduced energy barrier for the insertion of PO. The hydrophobic interaction between the PO blocks and membranes with the defects region dictates the "anchoring" kinetics, which is controlled by the association-dissociation of PO with the lipid membrane. As a result, the dependence of clustering rate on polymer concentration is strongly influenced by the hydrophobicity of the PO blocks. Nevertheless, longer PO blocks show stronger association with the membrane, resulting in faster consumption of the "active" sites made of these defect regions (causing mostly "invalid" insertions) with increasing polymer concentration, hence inhibiting the formation of large networking clusters, while shorter PO blocks undergo more frequent association with/dissociation from the defects, allowing continuous formation of larger clusters with increasing polymer concentration. This study provides important insights into how the organization and dynamics of a biomembrane influence its interaction with foreign amphiphilic molecules.

Effect of lamellarity and size on calorimetric phase transitions in single component phosphatidylcholine vesicles.

Nano-differential scanning calorimetry (nano-DSC) is a powerful tool in the investigation of unilamellar (small unilamellar, SUVs, or large unilamellar, LUVs) vesicles, as well as lipids on supported bilayers, since it measures the main gel-to-liquid phase transition temperature (Tm), enthalpies and entropies. In order to assign these transitions in single component systems, where Tm often occurred as a doublet, nano-DSC, dynamic light scattering and cryo-transmission electron microscopy (cryo-TEM) data were compared. The two Tms were not attributable to decoupled phase transitions between the two leaflets of the bilayer, i.e. nano-DSC measurements were not able to distinguish between the outer and inner leaflets of the vesicle bilayers. Instead, the two Tms were attributed to mixtures of oligolamellar and unilamellar vesicles, as confirmed by cryo-TEM images. Tm for the oligolamellar vesicles was assigned to the peak closest to that of the parent multilamellar vesicle (MLV) peak. The other transition was higher than that of the parent MLVs for 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), and increased in temperature as the vesicle size decreased, while it was lower in temperature than that of the parent MLVs for 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and decreased as the vesicle size decreased. These subtle shifts arose due to small differences in the values of ΔH and ΔS, since Tm is determined by their ratio (ΔH/ΔS). It was not possible to completely eliminate oligolamellar structures for MLVs extruded with the 200 nm pore size filter, even after 120 passes, while these structures were eliminated for MLVs extruded through the 50 nm pore size filter.

Patchy Layersomes Formed by Layer-by-Layer Coating of Liposomes with Strong Biopolyelectrolytes.

Layer-by-layer deposition of polyelectrolytes (PEs) onto self-assembled liposomes represents an alternative to PE deposition on solid particles for the formation of hollow nanoscale capsules. This work examines how competition between PE-liposome and inter-PE interactions drives the structure and colloidal stability of layersomes. Unlike solid particles, liposomes respond to adsorbed material through lipid reorganization and changes in size and shape. This responsive nature could yield new types of layered PE structures. We show that sequential deposition of strong biopolyelectrolytes, dextran sulfate-sodium salt (DxS-) and poly-l-arginine (PA+), onto cationic liposomes in water yields the expected charge inversion behavior commonly observed for dispersed particles. However, cryogenic transmission electron microscopy results show that the layersomes formed and their PE coatings were heterogeneous. The PE coatings contained PE complexes (PECs) that were formed when an even number of layers (2 or 4) was deposited. PECs remained attached as patches that were spatially distinguishable. This behavior was confirmed through fluorescence anisotropy measurements of liposome bilayer fluidity, where PA+ counteracted the ordering effects of DxS- on the lipid bilayer through charge neutralization and local PEC desorption. With increased charge screening, DxS- desorbed from the layersomes, whereas the patchy layersomes terminating in PA+ retained their PE coatings and colloidal stability at higher salt concentrations. To our knowledge, this is the first time such patchy layersome structures have been observed.

Radio Frequency-Activated Nanoliposomes for Controlled Combination Drug Delivery.

This work was conducted in order to design, characterize, and evaluate stable liposomes containing the hydrophobic drug raloxifene HCl (RAL) and hydrophilic doxycycline HCl (DOX), two potentially synergistic agents for treating osteoporosis and other bone lesions, in conjunction with a radio frequency-induced, hydrophobic magnetic nanoparticle-dependent triggering mechanism for drug release. Both drugs were successfully incorporated into liposomes by lipid film hydration, although combination drug loading compromised liposome stability. Liposome stability was improved by reducing the drug load and by including Pluronics® (PL) in the formulations. DOX did not appear to interact with the phospholipid membranes comprising the liposomes, and its release was maximized in the presence of radio frequency (RF) heating. In contrast, differential scanning calorimetry (DSC) and phosphorus-31 nuclear magnetic resonance ((31)P-NMR) analysis revealed that RAL developed strong interactions with the phospholipid membranes, most notably with lipid phosphate head groups, resulting in significant changes in membrane thermodynamics. Likewise, RAL release from liposomes was minimal, even in the presence of RF heating. These studies may offer useful insights into the design and optimization of multidrug containing liposomes. The effects of RAL on liposome characteristics and drug release performance underscore the importance of appropriate physical-chemical analysis in order to identify and characterize drug-lipid interactions that may profoundly affect liposome properties and performance early in the formulation development process.

Centrifugation-based assay for examining nanoparticle-lipid membrane binding and disruption.

Centrifugation-based assays are commonly employed to study protein-membrane affinity or binding using lipid bilayer vesicles. An analogous assay has been developed to study nanoparticle-membrane interactions as a function of nanoparticle surface functionalization, membrane lipid composition, and monovalent salt concentration (NaCl). Anionic (carboxylic acid, Ag-COOH), cationic (amine, Ag-NH), and polyethylene glycol coated (Ag-PEG) silver nanoparticles (AgNPs) were examined based on their surface plasmon resonance (SPR), which was used to determine the degree of binding to anionic, cationic, and zwitterionic membrane vesicles by analyzing supernatant and sediment phases. SPR was also used to examine AgNP aggregation in solution and at membrane-water interfaces, and direct visualization of AgNP-membrane binding, vesicle aggregation, and vesicle disruption was achieved by cryogenic transmission electron microscopy (cryo-TEM). The extent of AgNP binding, based on AgNP + vesicle heteroaggregation, and vesicle disruption was dependent upon the degree of electrostatic attraction. Because of their biological and environmental relevance, Ag-PEG + anionic vesicles systems were examined in detail. Cryo-TEM image analysis was performed to determine apparent membrane-water partition coefficients and AgNP aggregation states (in solution and bound to membranes) as a function of NaCl concentration. Despite possessing a PEG coating and exhibiting a slight negative charge, Ag-PEG was able to bind to model anionic bacterial membranes either as individual AgNPs (low salt) or as AgNP aggregates (high salt). The centrifugation assay provides a rapid and straightforward way to screen nanoparticle-membrane interactions.

Nanoparticles meet cell membranes: probing nonspecific interactions using model membranes.

Nanotoxicity studies have shown that both carbon-based and inorganic engineered nanoparticles can be toxic to microorganisms. Although the pathways for cytotoxicity are diverse and dependent upon the nature of the engineered nanoparticle and the chemical environment, numerous studies have provided evidence that direct contact between nanoparticles and bacterial cell membranes is necessary for cell inactivation or damage, and may in fact be a primary mechanism for cytotoxicity. The propensities for nanoparticles to attach to and disrupt cell membranes are still not well understood due to the heterogeneous and dynamic nature of biological membranes. Model biological membranes can be employed for systematic investigations of nanoparticle-membrane interactions. In this article, current and emerging experimental approaches to identify the key parameters that control the attachment of ENPs on model membranes and the disruption of membranes by ENPs will be discussed. This critical information will help enable the "safe-by-design" production of engineered nanoparticles that are nontoxic or biocompatible, and also allow for the design of antimicrobial nanoparticles for environmental and biomedical applications.

Differential scanning fluorimetry to assess PFAS binding to bovine serum albumin protein.

The rapid screening of protein binding affinity for poly- and perfluoroalkyl substances (PFAS) benefits risk assessment and fate and transport modelling. PFAS are known to bioaccumulate in livestock through contaminated food and water. One excretion pathway is through milk, which may be facilitated by binding to milk proteins such as bovine serum albumin (BSA). We report a label-free differential scanning fluorimetry approach to determine PFAS-BSA binding over a broad temperature range. This method utilizes the tryptophan residue within the protein binding pocket as an intrinsic fluorophore, eliminating the need for fluorophore labels that may influence binding. BSA association constants were determined by (a) an equilibrium-based model at the melting temperature of BSA and (b) the Hill adsorption model to account for temperature dependent binding and binding cooperativity. Differences in binding between PFAS and fatty acid analogs revealed that a combination of size and hydrophobicity drives PFAS binding.

Peptide amphiphile containing arginine and fatty acyl chains as molecular transporters.

Peptide amphiphiles (PAs) are promising tools for the intracellular delivery of numerous drugs. PAs are known to be biodegradable systems. Here, four PA derivatives containing arginine and lysine conjugated with fatty acyl groups with different chain lengths, namely, PA1: R-K(C14)-R, PA2: R-K(C16)-R, PA3: K(C14)-R-K(C14), and PA4: K(C16)-R-K(C16), where C16 = palmitic acid and C14 = myristic acid, were synthesized through Fmoc chemistry. Flow cytometry studies showed that, among all synthesized PAs, only K(C16)-R-K(C16), PA4 was able to enhance the cellular uptake of a fluorescence-labeled anti-HIV drug 2',3'-dideoxy-3'-thiacythidine (F'-3TC, F' = fluorescein) and a biologically important phosphopeptide (F'-PEpYLGLD) in human leukemia cells (CCRF-CEM) after 2 h incubation. For example, the cellular uptake of F'-3TC and F'-PEpYLGLD was enhanced approximately 7.1- and 12.6-fold in the presence of the PA4 compared to those of the drugs alone. Confocal microscopy of F'-3TC and F'-PEpYLGLD loaded PA4 in live cells showed significantly higher intracellular localization than the drug alone in human ovarian cells (SK-OV-3) after 2 h incubation. The high-performance liquid chromatography (HPLC) results showed that loading of Dox by the peptide amphiphile was 56% after 24 h. The loaded Dox was released (34%) within 48 h intracellularly. The circular dichrosim (CD) results exhibited that the secondary structure of the peptide was changed upon interactions with Dox. Mechanistic studies revealed that endocytosis is the major pathway of the internalization. These studies suggest that PAs containing the appropriate sequence of amino acids, chain length, charge, and hydrophobicity can be used as cellular delivery tools for transporting drugs and biomolecules.

n-Butanol partitioning into phase-separated heterogeneous lipid monolayers.

Cellular adaptation to elevated alcohol concentration involves altering membrane lipid composition to counteract fluidization. However, few studies have examined the biophysical response of biologically relevant heterogeneous membranes. Lipid phase behavior, molecular packing, and elasticity have been examined by surface pressure-area (π-A) analysis in mixed monolayers composed of saturated dipalmitoylphosphatidylcholine (DPPC) and unsaturated dioleoylphosphatidylcholine (DOPC) as a function of DOPC and n-butanol concentration. n-Butanol partitioning into DPPC monolayers led to lipid expansion and increased elasticity. Greater lipid expansion occurred with increasing DOPC concentration, and a maximum was observed at equimolar DPPC:DOPC consistent with n-butanol partitioning between coexisting liquid expanded (LE, DOPC) phases and liquid condensed (LC, DPPC) domains. This led to distinct changes in the size and morphology of LC domains. In DOPC-rich monolayers the effect of n-butanol adsorption on π-A behavior was less pronounced due to DOPC tail kinking. These results point to the importance of lipid composition and phase coexistence on n-butanol partitioning and monolayer restructuring.

Formation of lipid sheaths around nanoparticle-supported lipid bilayers.

High-surface-area nanoparticles often cluster, with unknown effects on their cellular uptake and environmental impact. In the presence of vesicles or cell membranes, lipid adsorption can occur on the nanoparticles, resulting in the formation of supported lipid bilayers (SLBs), which tend to resist cellular uptake. When the amount of lipid available is in excess compared with that required to form a single-SLB, large aggregates of SLBs enclosed by a close-fitting lipid bilayer sheath are shown to form. The proposed mechanism for this process is one where small unilamellar vesicles (SUVs) adsorb to aggregates of SLBs just above the gel-to-liquid phase transition temperature, T(m) , of the lipids (as observed by dynamic light scattering), and then fuse with each other (rather than to the underlying SLBs) upon cooling below T(m) . The sacks of SLB nanoparticles that are formed are encapsulated by the contiguous close-fitting lipid sheath, and precipitate below T(m) , due to reduced hydration repulsion and the absence of undulation/protrusion forces for the lipids attached to the solid support. The single-SLBs can be released above T(m) , where these forces are restored by the free lipid vesicles. This mechanism may be useful for encapsulation/release of drugs/DNA, and has implications for the toxic effects of nanoparticles, which may be mitigated by lipid sequestration.

Impact of impurities in biodiesel-derived crude glycerol on the fermentation by Clostridium pasteurianum ATCC 6013.

During the production of biodiesel, crude glycerol is produced as a byproduct at 10% (w/w). Clostridium pasteurianum has the inherent potential to grow on glycerol and produce 1,3-propanediol and butanol as the major products. Growth and product yields on crude glycerol were reported to be slower and lower, respectively, in comparison to the results obtained from pure glycerol. In this study, we analyzed the effect of each impurity present in the biodiesel-derived crude glycerol on the growth and metabolism of glycerol by C. pasteurianum. The crude glycerol contains methanol, salts (in the form of potassium chloride or sulfate), and fatty acids that were not transesterified. Salt and methanol were found to have no negative effects on the growth and metabolism of the bacteria on glycerol. The fatty acid with a higher degree of unsaturation, linoleic acid, was found to have strong inhibitory effect on the utilization of glycerol by the bacteria. The fatty acid with lower or no degrees of unsaturation such as stearic and oleic acid were found to be less detrimental to substrate utilization. The removal of fatty acids from crude glycerol by acid precipitation resulted in a fermentation behavior that is comparable to the one on pure glycerol. These results show that the fatty acids in the crude glycerol have a negative effect by directly affecting the utilization of glycerol as the carbon source, and hence their removal from crude glycerol is an essential step towards the utilization of crude glycerol.