A Facile Access to Green Fluorescent Albumin Derivatives.

A Morita-Baylis-Hillman Adduct (MBHA) derivative bearing a triphenylamine moiety was found to react with human serum albumin (HSA) shifting its emission from the blue to the green-yellow thus leading to green fluorescent albumin (GFA) derivatives and enlarging the platform of probes for aggregation-induced fluorescent-based detection techniques. A possible interaction of MBHA derivative 7 with a lipophilic pocket within the HSA structure was suggested by docking studies. DLS experiments showed that the reaction with HSA induce a conformational change of the protein contributing to the aggregation process of GFA derivatives. The results of investigations on the biological properties suggested that GFA retained the ability of binding drug molecules such as warfarin and diazepam. Finally, cytotoxicity evaluation studies suggested that, although the MBHA derivative 7 at 0.1 µg/mL affected the percentage of cell viability in comparison to the negative control, it cannot be considered cytotoxic, whereas at all the other concentrations≥0.5 µg/mL resulted cytotoxic at different extent.

Semi-Transparent Luminescent Solar Concentrators Based on Intramolecular Energy Transfer in Polyurethane Matrices.

Luminescent solar concentrators (LSCs) are spectral conversion devices offering interesting opportunities for the integration of photovoltaics into the built environment and portable systems. The Förster-resonance energy transfer (FRET) process can boost the optical response of LSCs by reducing energy losses typically associated to non-radiative processes occurring within the device under operation. In this work, a new class of FRET-based thin-film LSC devices is presented, in which the synthetic versatility of linear polyurethanes (PU) is exploited to control the photophysical properties and the device performance of the resulting LSCs. A series of luminescent linear PUs are synthesized in the presence of two novel bis-hydroxyl-functionalized luminophores of suitable optical properties, used as chain extenders during the step-growth polyaddition reaction for the formation of the linear macromolecular network. By synthetically tuning their composition, the obtained luminescent PUs can achieve a high energy transfer efficiency (≈90%) between the covalently linked luminophores. The corresponding LSC devices exhibit excellent photonic response, with external and internal photon efficiencies as high as ≈4% and ≈37%, respectively. Furthermore, their optimized power conversion efficiency combined with their enhanced average visible-light transmittance highlight their suitability for potential use as transparent solar energy devices.

Enhancement of Photoluminescence Properties via Polymer Infiltration in a Colloidal Photonic Glass.

Photonic glasses (PGs) based on the self-assembly of monosized nanoparticles can be an effective tool for realizing disordered structures capable of tailoring light diffusion due to the establishment of Mie resonances. In particular, the wavelength position of these resonances depends mainly on the morphology (dimension) and optical properties (refractive index) of the building blocks. In this study, we report the fabrication and optical characterization of photonic glasses obtained via a self-assembling technique. Furthermore, we have demonstrated that the infiltration of these systems with a green-emitting polymer enhances the properties of the polymer, resulting in a large increase in its photoluminescence quantum yield and a 3 ps growing time of the photoluminescence time decay Finally, the development of the aforementioned system can serve as a suitable low-cost platform for the realization of lasers and fluorescence-based bio-sensors.

3-Ethynyltriimidazo[1,2-a:1',2'-c:1″,2″-e][1,3,5]triazine Dual Short- and Long-Lived Emissions with Crystallization-Enhanced Feature: Role of Hydrogen Bonds and π-π Interactions.

Organic room temperature phosphorescent (ORTP) materials with stimuli-responsive, multicomponent emissive behaviour are extremely desirable for various applications. The derivative of cyclic triimidazole (TT) functionalized with an ethynyl group, TT-CCH, is isolated and investigated. The compound possesses crystallization-enhanced emission (CEE) comprising dual fluorescence and dual phosphorescence of both molecular and supramolecular origin with aggregation-induced components highly sensitive to grinding. The mechanisms involved in the emissions have been disclosed thanks to combined structural, spectroscopic and computational investigations. In particular, strong CH⋯N hydrogen bonds are deemed responsible, for the first time in the TT family, together with frequently observed π⋯π stacking interactions, for the aggregated fluorescence and phosphorescence.

Stimuli Responsive Features of Organic RTP Materials: An Intriguing Carbazole-Cyclic Triimidazole Derivative.

Stimuli responsive luminescent materials possessing room temperature phosphorescence (RTP) are extremely desirable for various applications. The here investigated derivative of cyclic triimidazole (TT) functionalized with carbazole (Cz), namely TT-Ph-Cz, belongs to this class. TT-Ph-Cz possesses high conformational freedom resulting in rigidochromic and multi-stimuli responsive emissive behavior. It has been isolated as MeOH-solvated and de-solvated forms characterized by distinctive emissive features. In particular, the solvated form, in which hydrogen bonds with MeOH inhibit competitive non-radiative deactivation channels, possesses a higher quantum yield associated with a strong phosphorescence contribution which is preserved in DMSO/water solutions.

Impact of chiral ligands on photophysical and electro-optical properties of ß-diketonate europium complexes in circularly polarized OLEDs.

Luminescent lanthanide complexes exhibiting chiroptical properties are attracting attention for their application in chiral optoelectronics and photonics, thanks to their unique optical properties, allied to intraconfigurational f-f transitions, which are generally electric-dipole-forbidden and can be magnetic dipole-allowed, which in an appropriate environment can lead to high dissymmetry factors and strong luminescence, in the presence of an antenna ligand. However, because luminescence and chiroptical activity are governed by different selection rules, their successful application in commonly used technologies is still an expectation. Recently, we showed that europium complexes bearing ß-diketonates acting as luminescence sensitizers, and chiral bis(oxazolinyl) pyridine derivatives as the chirality inducer, reasonably perform in circularly polarized (CP) organic light-emitting devices (OLEDs). Indeed, europium ß-diketonate complexes are an interesting molecular starting point, given their strong luminescence and their established use in conventional (i.e., nonpolarized) OLEDs. In this context, it is interesting to investigate in detail the impact of the ancillary chiral ligand on complex emission properties and the performances of corresponding CP-OLEDs. Here we show that, by incorporating the chiral compound as emitter in the architecture of solution processed electroluminescent devices, CP emission is retained, and the efficiency of the device is comparable to reference unpolarized OLED. The observed remarkable dissymmetry values strengthen the position of chiral lanthanide-OLEDs as CP-emitting devices.

Asymmetric AZA-BODIPY with Optical Gain in the Near-Infrared Region.

In recent years, there has been a lot of interest in the development of organic compounds emitting in the near-infrared (NIR) region due to their stimulating applications, such as biosensing and light detection and ranging (LiDAR). Moreover, a lot of effort has been devoted to finding organic emitters with optical gain in the NIR region for lasing applications. In this paper, we present the ultrafast spectroscopy of an asymmetric AZA-BODIPY molecule that shows relevant photophysical changes moving from a diluted solution to a concentrated solution and to a spin-coated film. The diluted solution and the spin-coated film show a bleaching band and a stimulated emission band in the visible region, while the very concentrated solution displays a broad (150 nm) and long-living (more than 400 ps) optical gain band in the NIR region, centered at 900 nm. Our results pave the way for a new organic laser system in a near-infrared spectral region.

Ultrasensitive Detection of Cu(II) and Pb(II) Using a Water-Soluble Perylene Probe.

The selective detection of metal ions in water, using sustainable detection systems, is of crescent importance for monitoring water environments and drinking water safety. One of the key elements of future chemical sciences is the use of sustainable approaches in the design of new materials. In this study, we design and synthesize a low-cost, water-soluble potassium salt of 3,4,9,10-perylene tetracarboxylic acid (PTAS), which shows a selective optical response on the addition of Cu2+ and Pb2+ ions in aqueous solutions. By using a water-soluble chromophore, the interactions with the metal ions are definitely more intimate and efficient, with respect to standard methods employing cosolvents. The detection limits of PTAS for both Cu2+ and Pb2+ are found to be 2 µM by using a simple absorbance mode, and even lower (1 µM) with NMR experiments, indicating that this analyte-probe system is sensitive enough for the detection of copper ions in drinking water and lead ions in waste water. The complexation of PTAS with both ions is supported with NMR studies, which reveal the formation of new species between PTAS and analytes. By combining a low-cost water-soluble chromophore with efficient analyte-probe interactions due to the use of aqueous solutions, the results here obtained provide a basis for designing sustainable sensing systems.

Solvent-Free Preparation and Moderate Congruent Melting Temperature of Layered Lead Iodide Perovskites for Thin-Film Formation.

Lead halide 2D hybrid perovskites (HP) have emerged as promising materials for photovoltaic and lighting applications. Solvent-free preparations offer greener route, but require congruent melting of halide perovskite for thin films, which has been demonstrated only for monolayered HP (n=1 of the (A)2 (MA)n-1 Pbn I3n+1 series) at the quite high temperature Tm (Tmelting ) of 171 °C. Here, we report on the solvent-free preparation (n=2, 4), thermal behaviour and melt-processed thin films of a series of HP (GABA)2 (MA)n-1 Pbn I3n+1 (n=1, 2, 4; GABA+ : 4-ammoniumbutyric acid cation). The n=1 and n=2 HP have an exceptional low congruent Tm of 126 °C and 136 °C, respectively, and, for n=1, a very good stability in the molten state. The liquid-solid reaction of molten (GABA)2 PbI4 or (GABA)2 (MA)Pb2 I7 with MAPbI3 in 1/1 (T=130 °C) or 1/2 (T=135 °C) ratio leads to pure phases of the n=2 HP and (GABA)2 (MA)3 Pb4 I11 (n=4, Tm =185 °C), respectively. Melt-processed thin films of n=1, n=2 and n=4 HP have also been prepared.

Tunable Linear and Nonlinear Optical Properties from Room Temperature Phosphorescent Cyclic Triimidazole-Pyrene Bio-Probe.

Organic materials with multiple emissions tunable by external stimuli represent a great challenge. TTPyr, crystallizing in different polymorphs, shows a very rich photophyisics comprising excitation-dependent fluorescence and phosphorescence at ambient conditions, and mechanochromic and thermochromic behavior. Transformation among the different species has been followed by thermal and X-ray diffraction analyses and the emissive features interpreted through structural results and DFT/TDDFT calculations. Particularly intriguing is the polymorph TTPyr(HT), serendipitously obtained at high temperature but stable also at room temperature, whose non-centrosymmetric structure guarantees an SHG efficiency 10 times higher than that of standard urea. Its crystal packing, where only the TT units are strongly rigidified by π-π stacking interactions while the Pyr moieties possess partial conformational freedom, is responsible for the observed dual fluorescence. The potentialities of TTPyr for bioimaging have been successfully established.

Prompt and Long-Lived Anti-Kasha Emission from Organic Dyes.

Anti-Kasha behavior has been the subject of intense debate in the last few years, as demonstrated by the high number of papers appearing in the literature on this topic, dealing with both mechanistic and applicative aspects of this phenomenon. Examples of anomalous emitters reported in the last 10 years are collected in the present review, which is focused on strictly anti-Kasha organic molecules displaying radiative deactivation from Sn and/or Tn, with n greater than 1.

Optical Gain in Semiconducting Polymer Nano and Mesoparticles.

The presence of excited-states and charge-separated species was identified through UV and visible laser pump and visible/near-infrared probe femtosecond transient absorption spectroscopy in spin coated films of poly[N-9″-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) nanoparticles and mesoparticles. Optical gain in the mesoparticle films is observed after excitation at both 400 and 610 nm. In the mesoparticle film, charge generation after UV excitation appears after around 50 ps, but little is observed after visible pump excitation. In the nanoparticle film, as for a uniform film of the pure polymer, charge formation was efficiently induced by UV excitation pump, while excitation of the low energetic absorption states (at 610 nm) induces in the nanoparticle film a large optical gain region reducing the charge formation efficiency. It is proposed that the different intermolecular interactions and molecular order within the nanoparticles and mesoparticles are responsible for their markedly different photophysical behavior. These results therefore demonstrate the possibility of a hitherto unexplored route to stimulated emission in a conjugated polymer that has relatively undemanding film preparation requirements.

The Key Role of the Interface in the Highly Sensitive Mechanochromic Luminescence Properties of Hybrid Perovskites.

Hybrid perovskite (HP) materials are of interest in photovoltaics and lighting applications. Here we report that hybrid perovskite composites, as crystallized powders, can behave as intelligent materials showing highly sensitive and reversible mechanochromic luminescence (MCL). Composites consisting of monolayered 2D HP and 3D HP components exhibit reversible tunable color emission upon mechanical strain. The bluish-whitish emission of the 2D HP turns into orange in the composite owing to an energy transfer process. The bright green emission, observed as soon as the composite is slightly crushed, originates from the 3D HP after efficient energy funneling from the multi-layered 2D HP produced at the 2D/3D interface by the mechanical treatment. Besides highlighting the key role of the interfaces in light emission of HP, our findings pave the way for hybrid perovskites as highly sensitive MCL smart materials for mechanosensors, security papers, or optical storage applications.

Intrinsic and Extrinsic Heavy-Atom Effects on the Multifaceted Emissive Behavior of Cyclic Triimidazole.

Considering that heavy halogen atoms can be used to tune the emissive properties of organic luminogens, the understanding of their role in photophysics is fundamental for materials engineering. Here, the extrinsic and intrinsic heavy-atom effects on the photophysics of organic crystals were separately evaluated by comparing cyclic triimidazole (TT) with its monoiodo derivative (TTI) and its co-crystal with diiodotetrafluorobenzene (TTCo). Crystals of TT showed room-temperature ultralong phosphorescence (RTUP) originated from H-aggregation. TTI and TTCo displayed two additional long-lived components, the origin of which is elucidated through single-crystal X-ray and DFT/TDDFT studies. The results highlight the different effects of the I atom on the three phosphorescent emissions. Intrinsic heavy-atom effects play a major role on molecular phosphorescence, which is displayed at room temperature only for TTI. The H-aggregate RTUP and the I⋅⋅⋅N XB-induced (XB=halogen bond) phosphorescence on the other side depend only on packing features.

Solid State Room Temperature Dual Phosphorescence from 3-(2-Fluoropyridin-4-yl)triimidazo[1,2-a:1',2'-c:1″,2″-e][1,3,5]triazine.

Organic room temperature persistent luminescence is a fascinating but still largely unexplored phenomenon. Cyclic-triimidazole and its halogenated (Br, I) derivatives have recently revealed as intriguing phosphors characterized by multifaceted emissive behavior including room temperature ultralong phosphorescence (RTUP) associated with the presence of H-aggregates in their crystal structure. Here, we move towards a multicomponent system by incorporating a fluoropyridinic fragment on the cyclic-triimidazole scaffold. Such chromophore enhances the molecular properties resulting in a high photoluminescence quantum yield (PL QY) in solution but preserves the solid-state RTUP. By means of X-ray diffraction (XRD) analysis, theoretical calculations, steady-state and time-resolved spectroscopy on solutions, polymethylmethacrylate (PMMA) blends and crystals, the nature of the different radiative deactivation channels of the compound has been disclosed. In particular, the molecular fluorescence and phosphorescence, this latter observed in frozen solution and in PMMA blends, are associated to deactivation from S1 and T1 respectively, while the low energy RTUP, observed only for crystals, is interpreted as originated from H aggregates.

Rhodamine binds to silk fibroin and inhibits its self-aggregation.

Amyloid structures are universal structures, widely diffuse in nature. Silk, capable of forming some of the strongest tensile materials on earth represents an important example of formation of functional amyloid fibrils, a process reminiscent of the oligomerization of peptides involved in neurodegenerative diseases. The stability of silk fibroin solutions in different conditions and its transition from α-helix/random coil to ß-sheet structures, at the basis of gelation processes and fibril formation, have been here investigated and monitored employing different biophysical approaches. Silk fibroin aggregation state as a function of concentration, pH and aging has been characterized employing NMR ordered diffusion spectroscopy. The change of silk fibroin diffusion coefficient over time, which reflects the progress of oligomerization, has been monitored for silk fibroin alone and in the presence of a polycondensed aromatic dye, namely rhodamine 6G. NMR, UV and DLS measurements indicated that rhodamine specifically binds to silk fibroin with a micromolar KD. The reported data reveal, for the first time, that RHD is capable of inhibiting fibroin self-association, thus controlling ß-conformational transition at the basis of fibril formation. The described approach could be extended to further protein systems, allowing better control of the oligomerisation process.

In Situ Electroluminescence Color Tuning by Thermal Deprotonation Suitable for Thermal Sensors and Anti-fraud Labels.

A novel and versatile approach to tune photoluminescence and electroluminescence by in situ controlled thermal deprotonation is presented. This methodology, based on a single organic π-conjugated material (pyrene derivative), allows the manufacturing of organic light-emitting diode (OLED) prototypes by solution methods with controlled tunable emission ranging from the orange (protonated form of the dye) to the blue (pristine or deprotonated form). While several protonation/deprotonation cycles can be performed on thin films, for the devices only one cycle is possible so that their use as anti-fraud labels can be envisaged. OLEDs exhibit daylight visible brightness of 150 cd m-2 and device lifetime exceeding 30 hours of continuous operation. Thanks to the simplicity of both material design and device fabrication our approach opens new perspectives in the wide field of thermal sensors for customer care or risk perception.

Structure-activity relationship for the solid state emission of a new family of "push-pull"π-extended chromophores.

We report the design, synthesis, molecular optical properties, and solid state emissive behaviour of a series of novel compounds, which, similar to the archetypal AIE luminogen tetraphenylethene, are formed of a central olefin stator and decorated with either three or four rotors. These rotors, being either electron-rich substituted benzenes, or electron-withdrawing functional groups (esters, ketones, cyano groups) confer a "push-pull" character to the overall molecular structure. Building on both new and already published contributions, a comprehensive picture of the properties and the potential of these compounds is provided.

Heteroleptic Cycloplatinated N-Heterocyclic Carbene Complexes: A New Approach to Highly Efficient Blue-Light Emitters.

New heteroleptic compounds of platinum(II)-containing cyclometalated N-heterocyclic carbenes, [PtCl(R-C^C*)(PPh3)] [R-CH^C*-κC* = 3-methyl-1-(naphthalen-2-yl)-1H-imidazol-2-ylidene (R-C = Naph; 1A), 1-[4-(ethoxycarbonyl)phenyl]-3-methyl-1H-imidazol-2-ylidene (R = CO2Et; 1B), and [Pt(R-C^C*)(py)(PPh3)]PF6 (py = pyridine; R-C = Naph, 2A; R = CO2Et, 2B], have been prepared and fully characterized. All of them were obtained as the trans-(C*,PPh3) isomer in high yields. The selectivity of their synthesis has been explained in terms of the degree of transphobia (T) of pairs of ligands in trans positions. X-ray diffraction studies on both 2A and 2B revealed that only in 2A, containing a C^C* with a more extended π system, do the molecules assemble themselves into head-to-tail pairs through intermolecular π···π contacts. The photophysical properties of 2A and 2B and those of the related compounds [Pt(NC-C^C*)(PPh3)L]PF6 [NC-CH^C*-κC* = 1-(4-cyanophenyl)-3-methyl-1H-imidazol-2-ylidene; L = pyridine (py; 2C), 2,6-dimethylphenylisocyanide (CNXyl; 3C), and 2-mercapto-1-methylimidazole (MMI; 4C)] have been examined to analyze the influence of the R substituent on R-C^C* (R-C = Naph; R = CO2Et, CN) and that of the ancillary ligands (L) on them. Experimental data and time-dependent density functional theory calculations showed the similarity of the electronic features associated with R-C^C* (R = CN, CO2Et) and their difference with respect to R-C^C* (R-C = Naph). All of the compounds are very efficient blue emitters in poly(methyl methacrylate) films under an argon atmosphere, with QY values ranging from 68% (2B) to 93% (2C). In the solid state, the color of the emission changes to yellowish-orange for compounds 2A (λmax = 600 nm) and 3C (λmax = 590 nm) because of the formation of aggregates through intermolecular π···π interactions. 2C and 3C were chosen to fabricate fully solution-processed electroluminescent devices with blue-light (2C), yellow-orange-light (3C), and white-light (mixtures of 2C and 3C) emission from neat films of the compounds as emitting layers.

Cyclic Triimidazole Derivatives: Intriguing Examples of Multiple Emissions and Ultralong Phosphorescence at Room Temperature.

The performance of solid luminogens depends on both their inherent electronic properties and their packing status. Intermolecular interactions have been exploited to achieve persistent room-temperature phosphorescence (RTP) from organic molecules. However, the design of organic materials with bright RTP and the rationalization of the role of interchromophoric electronic coupling remain challenging tasks. Cyclic triimidazole has been shown to be a promising scaffold for such purposes owing to its crystallization-induced room-temperature ultralong phosphorescence (RTUP), which has been associated with H-aggregation. Herein, we report three triimidazole derivatives as significant examples of multifaceted emission. In particular, dual fluorescence, RTUP, and phosphorescence from the molecular and supramolecular units were observed. H-aggregation is responsible for the red RTUP, and Br substituents favor yellow molecular phosphorescence while halogen-bonded Br⋅⋅⋅Br tetrameric units are involved in the blue-green phosphorescence.