Low-temperature thermocatalytic removal of formaldehyde in air using copper manganite spinels.

The removal of formaldehyde (FA) is vital for indoor air quality management in light of its carcinogenic propensity and adverse environmental impact. A series of copper manganite spinel structures (e.g., CuMn2O4) are prepared using the sol-gel combustion method and treated with reduction or oxidation pretreatment at 300 °C condition. Accordingly, CuMn2O4-O ("O" suffix for oxidation pre-treatment in air) is identified as the best performer to achieve 100% conversion (XFA) of FA (50 ppm) at 90 °C; its performance, if assessed in terms of reaction kinetic rate (r) at XFA = 10%, is 5.02E-03 mmol g-1 h-1. The FA removal performance increases systematically with decreases in flow rate, FA concentration, and relative humidity (RH) or with increases in bed mass. The reaction pathways and intermediates of FA catalytic oxidation on CuMn2O4-A are studied with density functional theory simulations, temperature-programmed characterization experiments, and in-situ diffuse reflectance infrared Fourier transform spectroscopy. The synergistic combination of large quantities of adsorbed oxygen (OA) species and oxidized metal species (e.g., Cu2+) contribute to the enhanced catalytic performance of CuMn2O4-O to oxidize FA into CO2 with the reaction intermediates of H2CO2 (DOM), HCOO-, and CO. The present study is expected to provide valuable insights into the thermocatalytic oxidation of FA over spinel CuMn2O4 materials and their catalytic performances in relation to the key process variables.

Unlocking Giant Third-Order Optical Nonlinearity in (MA)2CuX4 through Introducing Jahn-Teller Distortion.

Nonlinear absorption coefficient and modulation depth stand as pivotal properties of nonlinear optical (NLO) materials, while the existing NLO materials exhibit limitations such as low nonlinear absorption coefficients and/or small modulation depths, thereby severely impeding their practical application. Here we unveil that introducing Jahn-Teller distortion in a Mott-Hubbard system, (MA)2CuX4 (MA=methylammonium; X=Cl, Br) affords the simultaneous attainment of a giant nonlinear absorption coefficient and substantial modulation depth. The optimized compound, (MA)2CuCl4, demonstrates a nonlinear absorption coefficient of (1.5±0.08)×105 cm GW-1, a modulation depth of 60 %, and a relatively low optical limiting threshold of 1.22×10-5 J cm-2. These outstanding attributes surpass those of most reported NLO materials. Our investigation reveals that a more pronounced distortion of the [CuX6]4- octahedron emerges as a crucial factor in augmenting optical nonlinearity. Mechanism study involving structural and spectral characterization along with theoretical calculations indicates a correlation between the compelling performance and the Mott-Hubbard band structure of the materials, coupled with the Jahn-Teller distortion-induced d-d transition. This study not only introduces a promising category of high-performance NLO materials but also provides novel insights into enhancing the performance of such materials.

NiSe and CoSe Topological Nodal-Line Semimetals: A Sustainable Platform for Efficient Thermoplasmonics and Solar-Driven Photothermal Membrane Distillation.

The control of heat at the nanoscale via the excitation of localized surface plasmons in nanoparticles (NPs) irradiated with light holds great potential in several fields (cancer therapy, catalysis, desalination). To date, most thermoplasmonic applications are based on Ag and Au NPs, whose cost of raw materials inevitably limits the scalability for industrial applications requiring large amounts of photothermal NPs, as in the case of desalination plants. On the other hand, alternative nanomaterials proposed so far exhibit severe restrictions associated with the insufficient photothermal efficacy in the visible, the poor chemical stability, and the challenging scalability. Here, it is demonstrated the outstanding potential of NiSe and CoSe topological nodal-line semimetals for thermoplasmonics. The anisotropic dielectric properties of NiSe and CoSe activate additional plasmonic resonances. Specifically, NiSe and CoSe NPs support multiple localized surface plasmons in the optical range, resulting in a broadband matching with sunlight radiation spectrum. Finally, it is validated the proposed NiSe and CoSe-based thermoplasmonic platform by implementing solar-driven membrane distillation by adopting NiSe and CoSe nanofillers embedded in a polymeric membrane for seawater desalination. Remarkably, replacing Ag with NiSe and CoSe for solar membrane distillation increases the transmembrane flux by 330% and 690%, respectively. Correspondingly, costs of raw materials are also reduced by 24 and 11 times, respectively. The results pave the way for the advent of NiSe and CoSe for efficient and sustainable thermoplasmonics and related applications exploiting sunlight within the paradigm of the circular blue economy.

A new aggregation induced emission enhancement (AIEE) dye which self-assembles to panchromatic fluorescent flowers and has application in sensing dichromate ions.

We report for the very first time the crystal structure and self-assembly of a new aggregation-induced emission enhancement (AIEE) dye 4-(5-methoxythiazolo[4,5-b]pyridin-2-yl)-N,N-dimethylaniline (TPA) and its application in sensing dichromate ions. TPA reveals cyan blue emission under UV and visible light. The self-assembly properties of TPA were studied extensively by scanning electron microscopy (SEM) which revealed the formation of beautiful flower-like morphologies. These structures revealed both green and red fluorescence under FITC and rhodamine filters respectively when observed through fluorescence microscopy connoting the panchromatic emission properties of TPA from blue to red. The interactions which cause self-assembled structure formation in TPA were also validated theoretically using density functional theory (DFT) calculations. Crystal and molecular structure analysis of TPA was carried out via single-crystal X-ray diffraction to visualize the intermolecular interactions occurring in the solid-state and to study the structure-photophysical property relationship in the aggregated state. The photophysical properties of TPA were also studied extensively by UV-visible and fluorescence spectroscopy and its quantum yield and fluorescence lifetime were calculated by time-correlated single-photon counting (TCSPC). Interestingly, TPA could efficiently sense dichromate (Cr2O72-) ions in an acidic medium and an interesting morphological transition from a fluorescent flower to non-fluorescent disassembled structures could also be observed. The limit of detection of TPA for Cr2O72- ions was found to be as low as 5.5 nM, suggesting its exceptional sensitivity. More importantly, TPA could selectively sense Cr2O72- ions in real water samples even in the presence of other metal ions routinely present in polluted water, hence making it practically useful for water quality monitoring.

On the atomic structure of two-dimensional materials with Janus structures.

The discrepancy between the bright theoretical projections for two-dimensional (2D) Janus structures and the lack of experimental realisation of these structures motivated us to study the effect of structural disorder on the stability of MoSSe, SnSSe, PtSSe, In2SSe and GaInSe2. The calculation results demonstrate that the difference between metal-sulfur and metal-selenium bonds makes Janus structures frustrated and less energetically favourable than less ordered allotropes of the same compounds. This result explains the difficulties encountered in the experimental fabrication of these materials. In the bulk, there is an additional contribution to the total energy from dipole-dipole interactions between layers with a Janus structure that can overcome the energetic cost of structural frustration in layers for compounds with sufficiently large dipole moments. However, the entropic contribution to the free energy decreases the favourability of the ordered Janus structure. The calculation results are used to make recommendations to enable the discovery and synthesis of 2D materials with Janus structures.

Chemical reactions on surfaces for applications in catalysis, gas sensing, adsorption-assisted desalination and Li-ion batteries: opportunities and challenges for surface science.

The study of chemical processes on solid surfaces is a powerful tool to discover novel physicochemical concepts with direct implications for processes based on chemical reactions at surfaces, largely exploited by industry. Recent upgrades of experimental tools and computational capabilities, as well as the advent of two-dimensional materials, have opened new opportunities and challenges for surface science. In this Perspective, we highlight recent advances in application fields strictly connected to novel concepts emerging in surface science. Specifically, we show for selected case-study examples that surface oxidation can be unexpectedly beneficial for improving the efficiency in electrocatalysis (the hydrogen evolution reaction and oxygen evolution reaction) and photocatalysis, as well as in gas sensing. Moreover, we discuss the adsorption-assisted mechanism in membrane distillation for seawater desalination, as well as the use of surface-science tools in the study of Li-ion batteries. In all these applications, surface-science methodologies (both experimental and theoretical) have unveiled new physicochemical processes, whose efficiency can be further tuned by controlling surface phenomena, thus paving the way for a new era for the investigation of surfaces and interfaces of nanomaterials. In addition, we discuss the role of surface scientists in contemporary condensed matter physics, taking as case-study examples specific controversial debates concerning unexpected phenomena emerging in nanosheets of layered materials, solved by adopting a surface-science approach.

Thermal Effects and Halide Mixing of Hybrid Perovskites: MD and XPS Studies.

Thermal effects in organo-metal halide perovskites are studied by ab initio molecular dynamics (MD) simulations performed at effective temperatures of 293 and 383 K and by X-ray photoelectron spectroscopy (XPS). We find that the cause of thermal instability in this class of perovskites is the rotation of the methylammonium (MA) groups that destroy the rigid lattice of pure compounds (MAPbI3 and MAPbBr3). When the Pb-I lattice is initially distorted by partial replacement of the I with Cl or Br, this not only prevents formation of PbI2 seeds but also improves lattice flexibility and stability against the temperature-induced motion and rotation of MA groups.

Structural phase transitions in VSe2: energetics, electronic structure and magnetism.

First principles calculations of the magnetic and electronic properties of VSe2 describing the transition between two structural phases (H,T) were performed. The results of the calculations evidence a rather low energy barrier (0.60 eV for the monolayer) for the transition between the phases. The energy required for the deviation of a Se atom or whole layer of selenium atoms by a small angle of up to 10° from their initial positions is also rather low, 0.32 and 0.19 eV/Se, respectively. The changes in the band structure of VSe2 caused by these motions of Se atoms should be taken into account for analysis of the experimental data. Simulations of the strain effects suggest that the experimentally observed T phase of the VSe2 monolayer is the ground state due to substrate-induced strain. Calculations of the difference in the total energies of the ferromagnetic and antiferromagnetic configurations evidence that the ferromagnetic configuration is the ground state of the system for all stable and intermediate atomic structures. Calculated phonon dispersions suggest a visible influence of the magnetic configurations on the vibrational properties.

Liquid-Phase Exfoliated Indium-Selenide Flakes and Their Application in Hydrogen Evolution Reaction.

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of ß-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g L-1 . Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. It is demonstrated that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few micrometers, and thicknesses ranging from 1 to 20 nm, with a maximum population centered at ≈5 nm, corresponding to 4 Se-In-In-Se quaternary layers. It is also shown that no formation of further InSe-based compounds (such as In2 Se3 ) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for the hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. The dependence of the InSe flakes' morphologies, i.e., surface area and thickness, on the HER performances is highlighted, achieving the best efficiencies with small flakes offering predominant edge effects. The theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

Absence of a stable atomic structure in fluorinated graphene.

Based on the results of first-principles calculations we demonstrate that significant distortion of graphene sheets caused by adsorption of fluorine atoms leads to the formation of metastable patterns for which the next step of fluorination is considerably less energetically favorable. Existence of these stable patterns oriented along the armchair direction makes possible the synthesis of various CFx structures. The combination of strong distortion of the nonfluorinated graphene sheet with the doping caused by the polar nature of C-F bonds reduces the energy cost of migration and the energy of migration barriers, making possible the migration of fluorine atoms on the graphene surface as well as transformation of the shapes of fluorinated areas. The decreasing energy cost of migration with increasing fluorine content also leads to increasing numbers of single fluorine adatoms, which could be the source of magnetic moments.