RESUMO
Fifteen push-pull dyes comprising the tetracyclic polyaromatic pyrene have been designed and synthesized. The optical properties of the fifteen dyes have been examined in twenty-two solvents of different polarities. Surprisingly, contrarily to what is classically observed for push-pull dyes of D-π-A structures, a negative solvatochromism could be found for numerous dyes. The photoluminescence and thermal properties of the dyes were also examined. Theoretical calculations were carried out to support the experimental results.
RESUMO
The design of highly emissive and stable blue emitters for organic light emitting diodes (OLEDs) is still a challenge, justifying the intense research activity of the scientific community in this field. Recently, a great deal of interest has been devoted to the elaboration of emitters exhibiting a thermally activated delayed fluorescence (TADF). By a specific molecular design consisting into a minimal overlap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) due to a spatial separation of the electron-donating and the electron-releasing parts, luminescent materials exhibiting small S1-T1 energy splitting could be obtained, enabling to thermally upconvert the electrons from the triplet to the singlet excited states by reverse intersystem crossing (RISC). By harvesting both singlet and triplet excitons for light emission, OLEDs competing and sometimes overcoming the performance of phosphorescence-based OLEDs could be fabricated, justifying the interest for this new family of materials massively popularized by Chihaya Adachi since 2012. In this review, we proposed to focus on the recent advances in the molecular design of blue TADF emitters for OLEDs during the last few years.
RESUMO
Radical chemistry is a very convenient way to produce polymer materials. Here, an application of a particular photoinduced radical chemistry is illustrated. Seven new carbazole derivatives Cd1-Cd7 are incorporated and proposed as high performance near-UV photoinitiators for both the free radical polymerization (FRP) of (meth)acrylates and the cationic polymerization (CP) of epoxides utilizing Light Emitting Diodes LEDs @405 nm. Excellent polymerization-initiating abilities are found and high final reactive function conversions are obtained. Interestingly, these new derivatives display much better near-UV polymerization-initiating abilities compared to a reference UV absorbing carbazole (CARET 9H-carbazole-9-ethanol) demonstrating that the new substituents have good ability to red shift the absorption of the proposed photoinitiators. All the more strikingly, in combination with iodonium salt, Cd1-Cd7 are likewise preferred as cationic photoinitiators over the notable photoinitiator bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide (BAPO) for mild irradiation conditions featuring their remarkable reactivity. In particular their utilization in the preparation of new cationic resins for LED projector 3D printing is envisioned. A full picture of the included photochemical mechanisms is given.
Assuntos
Polímeros/química , Impressão Tridimensional , Carbazóis/química , Radicais Livres/química , PolimerizaçãoRESUMO
The ligand-exchange reaction has been investigated to synthesize nickel bis(dithiolene) complexes bearing one hydroxyl functional group aimed at being grafted thereafter onto polymer materials. This reaction leads easily to heteroleptic complexes with the ethylene-1,2-dithiolato core substituted by either alkyl or aryl moieties. Details on synthetic parameters are given. A direct link between the electronic properties of the obtained molecules and those of the parent complexes involved in the ligand-exchange reaction is highlighted and also demonstrates that this reaction is a powerful method for preparing nickel complexes with tailor-made frontier orbital energies.
RESUMO
n-Type organic electrochemical transistors (OECTs) and organic field-effect transistors (OFETs) are less developed than their p-type counterparts. Herein, polynaphthalenediimide (PNDI)-based copolymers bearing novel fluorinated selenophene-vinylene-selenophene (FSVS) units as efficient materials for both n-type OECTs and n-type OFETs are reported. The PNDI polymers with oligo(ethylene glycol) (EG7) side chains P(NDIEG7-FSVS), affords a high µC* of > 0.2 F cm-1 V-1 s-1 , outperforming the benchmark n-type Pg4NDI-T2 and Pg4NDI-gT2 by two orders of magnitude. The deep-lying LUMO of -4.63 eV endows P(NDIEG7-FSVS) with an ultra-low threshold voltage of 0.16 V. Moreover, the conjugated polymer with octyldodecyl (OD) side chains P(NDIOD-FSVS) exhibits a surprisingly low energetic disorder with an Urbach energy of 36 meV and an ultra-low activation energy of 39 meV, resulting in high electron mobility of up to 0.32 cm2 V-1 s-1 in n-type OFETs. These results demonstrate the great potential for simultaneously achieving a lower LUMO and a tighter intermolecular packing for the next-generation efficient n-type organic electronics.
RESUMO
A new member of the cyclo[n]pyrrole class of expanded porphyrins could be prepared from the corresponding thiophene-containing terpyrrole precursor through use of a mild electrochemical oxidative procedure. The isolated macrocycle, featuring nine heterocyclic subunits directly connected through their α,α'-positions, is the largest cyclo[n]pyrrole derivative reported to date (see figure).
RESUMO
Over the past decade, perovskite-based nanomaterials have gained notoriety within the scientific community and have been used for a variety of viable applications. The unique structural properties of these materials, namely good direct bandgap, low density of defects, large absorption coefficient, high sensitivity, long charge carrier lifetime, good selectivity, acceptable stability at room temperature, and good diffusion length have prompted researchers to explore their potential applications in photovoltaics, light-emitting devices, transistors, sensors, and other areas. Perovskite-based devices have shown very excellent sensing performances to numerous chemical and biological compounds in both solid and liquid mediums. When used in sensing devices, Perovskite nanomaterials are for the most part able to detect O2, NO2, CO2, H2O, and other smaller molecules. This review article looks at the use of lead-free halide perovskite materials for humidity sensing. A complete description of the underlying mechanisms and charge transport characteristics that are necessary for a thorough comprehension of the sensing performance will be provided. An overview of considerations and potential recommendations for the creation of new lead-free perovskite nanostructure-based sensors is presented.
RESUMO
A thermally stable perovskite solar cell (PSC) based on a new molecular hole transporter (MHT) of 1,3-bis(5-(4-(bis(4-methoxyphenyl) amino)phenyl)thieno[3,2-b]thiophen-2-yl)-5-octyl-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione (coded HL38) is reported. Hole mobility of 1.36 × 10-3 cm2 V-1 s-1 and glass transition temperature of 92.2 °C are determined for the HL38 doped with lithium bis(trifluoromethanesulfonyl)imide and 4-tert-butylpyridine as additives. Interface engineering with 2-(2-aminoethyl)thiophene hydroiodide (2-TEAI) between the perovskite and the HL38 improves the power conversion efficiency (PCE) from 19.60% (untreated) to 21.98%, and this champion PCE is even higher than that of the additive-containing 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-MeOTAD)-based device (21.15%). Thermal stability testing at 85 °C for over 1000 h shows that the HL38-based PSC retains 85.9% of the initial PCE, while the spiro-MeOTAD-based PSC degrades unrecoverably from 21.1% to 5.8%. Time-of-flight secondary-ion mass spectrometry studies combined with Fourier transform infrared spectroscopy reveal that HL38 shows lower lithium ion diffusivity than spiro-MeOTAD due to a strong complexation of the Li+ with HL38, which is responsible for the higher degree of thermal stability. This work delivers an important message that capturing mobile Li+ in a hole-transporting layer is critical in designing novel MHTs for improving the thermal stability of PSCs. In addition, it also highlights the impact of interface design on non-conventional MHTs.
RESUMO
A series of ten push-pull chromophores comprising 1H-cyclopenta[b]naphthalene-1,3(2H)-dione as the electron-withdrawing group have been designed, synthesized, and characterized by UV-visible absorption and fluorescence spectroscopy, cyclic voltammetry and theoretical calculations. The solvatochromic behavior of the different dyes has been examined in 23 solvents and a positive solvatochromism has been found for all dyes using the Kamlet-Taft solvatochromic relationship, demonstrating the polar form to be stabilized in polar solvents. To establish the interest of this polyaromatic electron acceptor only synthesizable in a multistep procedure, a comparison with the analog series based on the benchmark indane-1,3-dione (1H-indene-1,3(2H)-dione) has been done. A significant red-shift of the intramolecular charge transfer band has been found for all dyes, at a comparable electron-donating group. Parallel to the examination of the photophysical properties of the different chromophores, a major improvement of the synthetic procedure giving access to 1H-cyclopenta[b]naphthalene-1,3(2H)-dione has been achieved.
RESUMO
Two readily accessible thienothiophene-triphenylamine charge-transport materials have been synthesized by simply varying the substitution pattern of the triphenylamine groups on a central thienothiophene π-linker. The impact of the substitution pattern on the thermal, photoelectrochemical, and photovoltaic properties of these materials was evaluated and, based on theoretical and experimental studies, we found that the isomer in which the triphenylamine groups were located at the 2,5-positions of the thienothiophene core (TT-2,5-TPA) had better π-conjugation than the 3,6-isomer (TT-3,6-TPA). Whilst the thermal, morphological, and hydrophobic properties of the two materials were similar, their optoelectrochemical and photovoltaic properties were noticeably impacted. When applied as hole-transport materials in hybrid perovskite solar cells, the 2,5-isomer exhibited a power-conversion efficiency of 13.6 %, much higher than that of its 3,6-counterpart (0.7 %) under the same standard conditions.
RESUMO
The photoinitiating abilities of indoline and squaraine dyes (D102 and SQ02) incorporated in multicomponent systems for the cationic polymerization of an epoxide or a vinyl ether have been investigated. The polymerizable films exhibit a panchromatic character as revealed by their photosensitivity to a halogen lamp (370-800 nm); household LED bulbs centered at 462 nm (blue), 514 nm (green), 591 nm (yellow), and 630 nm (red); and laser diodes at 457, 473, 532, and 635 nm. SQ02 is particularly efficient in the 520-700 nm range, while D102 exhibits a good efficiency in the 400-580 nm region. The radical photopolymerization of an acrylate can also be observed particularly at 635 nm or upon a halogen lamp. The photochemical mechanisms are studied by steady state photolysis, fluorescence, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques.