Deciphering the Polymorphism of CaSi2: The Influence of Heat and Composition.

The Zintl phase CaSi2 is a layered compound with stacking variants known as 1P, 3R, and 6R. We extend the series by the 21R polytype formed by rapid cooling of the melt. The crystal structure of 21R-CaSi2 (space group R3̅m) was derived from HRTEM images, and the atomic positions were optimized by using the FPLO code (a = 3.868 Å, c = 107.276 Å). We explore polytype transformations by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron backscattering diffraction (EBSD), and thermal analysis. While 6R-CaSi2 is thermodynamically stable at ambient conditions, nanosized impurities of silicon stabilize 3R-CaSi2 as a bulk phase.

Structural Complexity in the Apparently Simple Crystal Structure of Be2 Ru.

The structural features of the hexagonal layered crystal structure of Be2 Ru (a=5.7508(3) Å, c=3.0044(2) Å, space group P 6 ‾ ${\bar{6}}$ 2m) were investigated by single crystal X-ray diffraction and transmission electron microscopy (TEM). The residual electron density and high-resolution TEM images show that the real structure can be described as an intergrowth of the main hexagonal matrix of the Fe2 P type with minor orthorhombic inclusions of its stacking variants. Such atomic arrangement is stabilized by the charge transfer from Be to Ru and by a system of polar three- and four-atomic bonds involving both components. The calculated electronic density of states (DOS) of Be2 Ru revealed, contrarily to typical intermetallic compounds, a pseudo gap (dip) in the vicinity of the Fermi level. The temperature dependence of the electrical resistivity of Be2 Ru shows metal behaviour in agreement with the non-zero DOS at the Fermi level.

Charge Transfer in Be-Ru Compounds.

During the investigation of the binary system Be-Ru two new phases - Be7 Ru4 and Be12 Ru7 - with similar compositions (63.6 at. % Be and 63.2 at. % Be, respectively), are discovered. They both represent new structural prototypes. The phases are located between Be2 Ru (Fe2 P-type structure) and Be3 Ru2 (U3 Si2 -type structure) in the phase diagram. This explains why their crystal structures, solved and refined from single crystal X-ray diffraction data, are described as 2D intergrowth of Fe2 P and U3 Si2 motives. The calculated electronic density of stats (DOS) reveals pronounced minima in the vicinity of the Fermi level for both compounds. Position-space analysis of chemical bonding exhibits the formation of three- and four-atomic polar bonds, involving both, Ru and Be, atoms, and a strong charge transfer from Be to the more electronegative Ru.

Synthesis of Isostructural Intermetallic Sn-Pb-Bi-Pt Platform Materials for Catalytic Investigations.

The isostructural region (Sn,Pb,Bi)Pt has been established over a wide range of the quasi-ternary section of the quaternary phase diagram. A synthesis protocol was developed, and single-phase compounds were thoroughly characterized, revealing linear relationships between the volume of the unit cell and the substitution degree for the NiAs type of crystal structure. Together with the already established (Pb,Bi)Pt series, the isostructural cut at 50 atom % Pt forms an ideal platform to independently investigate the influence of electronic and structural properties for physical and chemical applications, such as electrocatalysis. The three binary endmembers SnPt, PbPt, and BiPt are active materials in a variety of electrocatalytic oxidation and reduction reactions such as methanol oxidation and oxygen reduction, respectively. By gradual substitution, a fully independent tuning of interatomic distances and electronic densities can be achieved without altering the crystal structure. This unique adaptability is gated behind the requirement of extended homogeneity ranges of at least quaternary intermetallic compounds. Here, we present this new platform for systematic investigations in (electro) catalysis.

Na2Ga7: A Zintl-Wade Phase Related to "α-Tetragonal Boron".

Na2Ga7 crystallizes with the orthorhombic space group Pnma (no. 62; a = 14.8580(6) Å, b = 8.6766(6) Å, and c = 11.6105(5) Å; Z = 8) and constitutes a filled variant of the Li2B12Si2 structure type. The crystal structure consists of a network of icosahedral Ga12 units with 12 exohedral bonds and four-bonded Ga atoms in which the Na atoms occupy the channels and cavities. The atomic arrangement is consistent with the Zintl [(4b)Ga]- and Wade [(12b)Ga12]2- electron counting approach. The compound forms peritectically from Na7Ga13 and the melt at 501 °C and does not show a homogeneity range. The band structure calculations predict semiconducting behavior consistent with the electron balance [Na+]4[(Ga12)2-][Ga-]2. Magnetic susceptibility measurements show that Na2Ga7 is diamagnetic.

Al-Pt intermetallic compounds: HAXPES study.

Intermetallic compounds in the Al-Pt system were systematically studied via hard X-ray photoelectron spectroscopy, focusing on the positions of Pt 4f and Al 2s core levels and valence band features. On one hand, with increasing Al content, the Pt 4f core levels shift towards higher binding energies (BE), revealing the influence of the atomic interactions (chemical bonding) on the electronic state of Pt. On the other hand, the charge transfer from Al to Pt increases with increasing Al content in Al-Pt compounds. These two facts cannot be combined using the standard "chemical shift" approach. Computational analysis reveals that higher negative effective charges of Pt atoms are accompanied by reduced occupancy of Pt 5d orbitals, leading to the limited availability of these electrons for the screening of the 4f core hole and this in turn explains the experimentally observed shift of 4f core levels to higher BE.

Mg29-xPt4+y: Chemical Bonding Inhomogeneity and Structural Complexity.

Mg29-xPt4+y represents the family of complex intermetallic compounds (complex metallic alloys, CMAs). It crystallizes in the cubic non-centrosymmetric space group F4̅3m with a = 20.1068(2) Šand around 400 atoms in a predominantly ordered arrangement. The local disorder around the unit cell origin is experimentally resolved by single-crystal X-ray diffraction in combination with atomic-resolution transmission electron microscopy (TEM, high-angle dark-field scanning TEM) studies. The quantum theory of atoms in molecules-based analysis of atomic charges shows that the unusual mixed Mg/Pt site occupation around the origin results from local charge equilibration in this region of the crystal structure. Chemical bonding analysis reveals for Mg29-xPt4+y─rather unexpected for a crystal structure of this size─space-separated regions of hetero- and homoatomic bonds involving three to six partners (bonding inhomogeneity). Pt-containing 11- and 13-atomic units formed by heteroatomic 3a-, 4a-, and 5a-bonds are condensed via edges and faces to large super-tetrahedrons, which are interlinked by Mg-only 6a-bonds. Spatial separation of the regions with different bonding features is the key difference between the title compound and other CMAs, which are characterized by a predominantly homogeneous distribution of heteroatomic bonds.

Crystal Chemistry and Physics of UCd11.

In the phase diagram U-Cd, only one compound has been identified so far─UCd11 (space group Pm3̅m). Since the discovery of this material, the physical properties of UCd11 have attracted a considerable amount of attention. In particular, its complex magnetic phase diagram─as a result of tuning with magnetic field or pressure─is not well-understood. From a chemical perspective, a range of lattice parameter values have been reported, suggesting a possibility of a considerable homogeneity range, i.e., UCd11-x. In this work, we perform a simultaneous study of crystallographic features coupled with measurements of physical properties. This work sheds light on the delicate relationship between the intrinsic crystal chemistry and magnetic properties of UCd11.

Crystal Structures of AlCr2 and MoSi2 : Same Structure Type vs. Different Bonding Pattern.

In a joint effort utilizing modified sample preparation, microscopy, X-ray diffraction and micro-fabrication, it became possible to prepare single crystals of the "hidden" phase AlCr2 . High-resolution X-ray diffraction analysis is described in detail for two crystals with the similar overall composition, but different degree of disorder, which seems to be the main cause for the differing unit cell parameters. Chemical bonding analysis of AlCr2 in comparison to prototypical MoSi2 shows pronounced differences reflecting the interchange of main group element vs. transition metal as majority component.

Mg3Pt2: Anionic Chains in a Eu3Ga2-Type Structure.

The binary phase Mg3Pt2 was prepared by direct reaction between the elements or by spark-plasma synthesis starting with MgH2 and PtCl2. The compound crystallizes in the monoclinic space group C2/c with a = 7.2096(3) Å, b = 7.1912(4) Å, c = 6.8977(3) Å, and ß = 106.072(3)° and is isotypic to Eu3Ga2. Analysis of the electron density within the quantum theory of atoms in molecules shows a significant charge transfer from Mg to Pt in agreement with the electronegativity difference. Further study of the chemical bonding with the electron localizability approach reveals the formation of Pt chains stabilized by a complex system of multicenter interactions involving Mg and Pt species. The metallic character of Mg3Pt2 is confirmed by electronic structure calculations and physical measurements.

Crystal Structure and Physical Properties of the Cage Compound Hf2B2-2δIr5+δ.

Hf2B2-2δIr5+δ crystallizes with a new type of structure: space group Pbam, a = 5.6300(3) Å, b = 11.2599(5) Å, and c = 3.8328(2) Å. Nearly 5% of the boron pairs are randomly replaced by single iridium atoms (Ir5+δB2-2δ). From an analysis of the chemical bonding, the crystal structure can be understood as a three-dimensional framework stabilized by covalent two-atom B-B and Ir-Ir as well as three-atom Ir-Ir-B and Ir-Ir-Ir interactions. The hafnium atoms center 14-atom cavities and transfer a significant amount of charge to the polyanionic boron-iridium framework. This refractory boride displays moderate hardness and is a Pauli paramagnet with metallic electrical resistivity, Seebeck coefficient, and thermal conductivity. The metallic character of this system is also confirmed by electronic structure calculations revealing 5.8 states eV-1 fu-1 at the Fermi level. Zr2B2-2δIr5+δ is found to be isotypic with Hf2B2-2δIr5+δ, and both form a continuous solid solution.

Validation of Spiked Postmortem Blood Samples from Cornea Donors on the Abbott ARCHITECT and m2000 Systems for Viral Infections.

BACKGROUND: Transplantation of human corneal tissue is associated with the potential risk of transmittance of viral infections. In accordance with European directives and federal laws, in Germany each tissue donor has to be tested for infectious diseases such as hepatitis B and C virus (HBV and HCV) and human immunodeficiency virus (HIV) infection. However, most of the currently available CE-marked serologic and nucleic acid screening systems are only validated for antemortem blood. METHODS: Twenty related and paired ante- and postmortem blood samples from cornea donors were obtained and subsequently analyzed for hepatitis B surface antigen (HBsAg), hepatitis B antibody (anti-HBc), anti-HCV, HCV RNA, anti-HIV-1/2, and HIV p24 Ag using Abbott test systems. The sera were also spiked with reference materials in concentrations giving low and high positivity for HBV, HCV, and HIV markers. RESULTS: The spiked ante- and postmortem sera from related donors showed similar results for HBsAg, anti-HBc, anti-HCV, HCV RNA, anti-HIV, and HIV p24 Ag, indicating a high stability of viral markers in cadaveric specimens. Three cornea donors had a medical history of HBV infection and revealed anti-HBc at similar levels in the ante- and postmortem sera. In addition, there was a single postmortem sample demonstrating a weak signal of anti-HIV-1 and HIV-1 p24 Ag. False-positive or false-negative results were not detected. The results obtained with the Abbott ARCHITECT analyzer and Abbott RealTime HCV PCR showed no significant differences. CONCLUSION: The analyzed screening assays are suitable for the detection of infectious markers of HBV, HCV, and HIV at similar levels in spiked ante- and postmortem sera from cornea donors.

Al2 Pt for Oxygen Evolution in Water Splitting: A Strategy for Creating Multifunctionality in Electrocatalysis.

The production of hydrogen via water electrolysis is feasible only if effective and stable catalysts for the oxygen evolution reaction (OER) are available. Intermetallic compounds with well-defined crystal and electronic structures as well as particular chemical bonding features are suggested here to act as precursors for new composite materials with attractive catalytic properties. Al2 Pt combines a characteristic inorganic crystal structure (anti-fluorite type) and a strongly polar chemical bonding with the advantage of elemental platinum in terms of stability against dissolution under OER conditions. We describe here the unforeseen performance of a surface nanocomposite architecture resulting from the self-organized transformation of the bulk intermetallic precursor Al2 Pt in OER.

Author Correction: Room-temperature ductile inorganic semiconductor.

In the version of this Article originally published, the x-axis numbers of Fig. 3d were incorrect; the range should have been 0 to 12 instead of 1 to 13. This has now been corrected.

Room-temperature ductile inorganic semiconductor.

Ductility is common in metals and metal-based alloys, but is rarely observed in inorganic semiconductors and ceramic insulators. In particular, room-temperature ductile inorganic semiconductors were not known until now. Here, we report an inorganic α-Ag2S semiconductor that exhibits extraordinary metal-like ductility with high plastic deformation strains at room temperature. Analysis of the chemical bonding reveals systems of planes with relatively weak atomic interactions in the crystal structure. In combination with irregularly distributed silver-silver and sulfur-silver bonds due to the silver diffusion, they suppress the cleavage of the material, and thus result in unprecedented ductility. This work opens up the possibility of searching for ductile inorganic semiconductors/ceramics for flexible electronic devices.

Cluster Formation in the Superconducting Complex Intermetallic Compound Be21Pt5.

Materials with the crystal structure of γ-brass type (Cu5Zn8 type) are typical representatives of intermetallic compounds. From the electronic point of view, they are often interpreted using the valence electron concentration approach of Hume-Rothery, developed previously for transition metals. The γ-brass-type phases of the main-group elements are rather rare. The intermetallic compound Be21Pt5, a new member of this family, was synthesized, and its crystal structure, chemical bonding, and physical properties were characterized. Be21Pt5 crystallizes in the cubic space group F4̅3m with lattice parameter a = 15.90417(3) Å and 416 atoms per unit cell. From the crystallographic point of view, the binary substance represents a special family of intermetallic compounds called complex metallic alloys (CMA). The crystal structure was solved by a combination of synchrotron and neutron powder diffraction data. Besides the large difference in the scattering power of the components, the structure solution was hampered by the systematic presence of very weak reflections mimicking wrong symmetry. The structural motif of Be21Pt5 is described as a 2 × 2 × 2 superstructure of the γ-brass structure (Cu5Zn8 type) or 6 × 6 × 6 superstructure of the simple bcc structural pattern with distinct distribution of defects. The main building elements of the crystal structure are four types of nested polyhedral units (clusters) with the compositions Be22Pt4 and Be20Pt6. Each cluster contains four shells (4 + 4 + 6 + 12 atoms). Clusters with different compositions reveal various occupation of the shells by platinum and beryllium. Polyhedral nested units with the same composition differ by the distance of the shell atoms to the cluster center. Analysis of chemical bonding was made applying the electron localizability approach, a quantum chemical technique operating in real space that is proven to be especially efficient for intermetallic compounds. Evaluations of the calculated electron density and electron localizability indicator (ELI-D) revealed multicenter bonding, being in accordance with the low valence electron count per atom in Be21Pt5. A new type of atomic interactions in intermetallic compounds, cluster bonds involving 8 or even 14 atoms, is found in the clusters with shorter distances between the shell atoms and the cluster centers. In the remaining clusters, four- and five-center bonds characterize the atomic interactions. Multicluster interactions within the polyhedral nested units and three-center polar intercluster bonds result in a three-dimensional framework resembling the structural pattern of NaCl. Be21Pt5 is a diamagnetic metal and one of rather rare CMA compounds revealing superconductivity (Tc = 2.06 K).

Ca-Ag compounds in ethylene epoxidation reaction.

The ethylene epoxidation is a challenging catalytic process, and development of active and selective catalyst requires profound understanding of its chemical behaviour under reaction conditions. The systematic study on intermetallic compounds in the Ca-Ag system under ethylene epoxidation conditions clearly shows that the character of the oxidation processes on the surface originates from the atomic interactions in the pristine compound. The Ag-rich compounds Ca2Ag7 and CaAg2 undergo oxidation towards fcc Ag and a complex Ca-based support, whereas equiatomic CaAg and the Ca-rich compounds Ca5Ag3 and Ca3Ag in bulk remain stable under harsh ethylene epoxidation conditions. For the latter presence of water vapour in the gas stream leads to noticeable corrosion. Combining the experimental results with the chemical bonding analysis and first-principles calculations, the relationships among the chemical nature of the compounds, their reactivity and catalytic performance towards epoxidation of ethylene are investigated.

Tungsten Borides: On the Reaction of Tungsten with Boron(III) Bromide.

The crucible-free reaction between heated tungsten wires and gaseous boron tribromide yields different tungsten borides. The experiments were carried out at various reaction temperatures and times, revealing the formation of W2 B, WB and WB2 phases. The underlying reactions were analyzed by using thermodynamic model calculations. The stability of the gaseous tungsten bromides was evaluated using quantum chemical methods. While the developed synthesis of phase-pure borides is only possible to a limited extent, it offers a potential route for a formation of protective coatings with high chemical and thermal resistance.

Anisotropic Reactivity of CaAg under Ethylene Epoxidation Conditions.

The chemical behavior of CaAg as catalyst for ethylene epoxidation was studied using a combination of experimental (X-ray powder diffraction, scanning electron microscopy, thermal analysis and infrared spectroscopy), and quantum chemical techniques as well as real-space chemical bonding analysis. Under oxidative ethylene epoxidation conditions, the CaAg (010) surface possesses an outstanding stability during long-term experiments. It is caused by the formation of an ordered, stable and dense CaO passivation layer with a small amount of embedded Ag atoms. On this way, the (010) surface constitutes a kinetic barrier for further incorporation of oxygen into the subsurface region and thereby prevents  further oxidative decomposition of CaAg. The calculated adsorption energies of the reaction species show strong adsorption of the reaction products that may explain the observed low conversion of ethylene toward ethylene oxide using CaAg as catalyst.

Local Atomic Arrangements and Band Structure of Boron Carbide.

Boron carbide, the simple chemical combination of boron and carbon, is one of the best-known binary ceramic materials. Despite that, a coherent description of its crystal structure and physical properties resembles one of the most challenging problems in materials science. By combining ab initio computational studies, precise crystal structure determination from diffraction experiments, and state-of-the-art high-resolution transmission electron microscopy imaging, this concerted investigation reveals hitherto unknown local structure modifications together with the known structural alterations. The mixture of different local atomic arrangements within the real crystal structure reduces the electron deficiency of the pristine structure CBC+B12 , answering the question about electron precise character of boron carbide and introducing new electronic states within the band gap, which allow a better understanding of physical properties.