Improved Capacitive Energy Storage Nanocomposites at High Temperature Utilizing Ultralow Loading of Bimetallic MOF.

It is urgent to develop high-temperature dielectrics with high energy density and high energy efficiency for next-generation capacitor demands. Metal-organic frameworks (MOFs) have been widely used due to their structural diversity and functionally adaptable properties. Doping of metal nodes in MOFs is an effective strategy to change the band gap and band edge positions of the original MOFs, which helps to improve their ability to bind charges as traps. In this work, the incorporation of ultralow loading (<1.5 wt%) of novel bimetallic MOFs (ZIF 8-67) into the polyetherimide (PEI) polymer matrix is exhibited. With the addition of ZIF 8-67, the breakdown strength and energy storage capacity of ZIF 8-67/PEI nanocomposites are significantly improved, especially at high temperatures (200 °C). For example, the energy densitiy of the 0.5 wt% ZIF 8-67/PEI nanocomposite is up to 2.96 J cm-3 , with an efficiency (η) > 90% at 150 °C. At 200 °C, the discharge energy density of 0.25 wt% ZIF 8-67/PEI nanocomposites can still reach 1.84 J cm-3 with a η > 90%, which is nine times higher than that of pure PEI (0.21 J cm-3 ) under the same conditions, and it is the largest improvement compared with the previous reports.

Biomass-Derived Hard Carbon for Sodium-Ion Batteries: Basic Research and Industrial Application.

Sodium-ion batteries (SIBs) have significant potential for applications in portable electric vehicles and intermittent renewable energy storage due to their relatively low cost. Currently, hard carbon (HC) materials are considered commercially viable anode materials for SIBs due to their advantages, including larger capacity, low cost, low operating voltage, and inimitable microstructure. Among these materials, renewable biomass-derived hard carbon anodes are commonly used in SIBs. However, the reports about biomass hard carbon from basic research to industrial applications are very rare. In this paper, we focus on the research progress of biomass-derived hard carbon materials from the following perspectives: (1) sodium storage mechanisms in hard carbon; (2) optimization strategies for hard carbon materials encompassing design, synthesis, heteroatom doping, material compounding, electrolyte modulation, and presodiation; (3) classification of different biomass-derived hard carbon materials based on precursor source, a comparison of their properties, and a discussion on the effects of different biomass sources on hard carbon material properties; (4) challenges and strategies for practical of biomass-derived hard carbon anode in SIBs; and (5) an overview of the current industrialization of biomass-derived hard carbon anodes. Finally, we present the challenges, strategies, and prospects for the future development of biomass-derived hard carbon materials.