RESUMO
Distribution characteristics and biodiversity of microbial communities were studied in a 1200 m pilot sewer system. Results showed that the dominant microorganisms, fermentation bacteria (FB), hydrogen-producing acetogen (HPA), sulfate-reducing bacteria (SRB) and methanogenic archaea (MA) changed significantly along the sewer systems, from start to the end. The distribution of the functional microorganisms could induce substrate transformation and lead to the accumulation of micromolecular organics (i.e., acetic acid, propionic acid and amino acid). However, substrate transformation induced by these microbes was affected by environmental factors such as oxidation-reduction potential, pH and dissolved oxygen. Changes in environmental conditions along the sewer resulted in the variation of dominant bioreactions. FB were enriched at the beginning of the sewer, while SRB and MA were found toward the end. Furthermore, based on Spearman rank correlation analysis of microbial communities, environmental factors and substrates, covariation between microbial community distribution and organics metabolization along the sewer was identified. This study could provide a theoretical foundation for understanding wastewater quality variation during transportation from sewers to treatment plants, therefore, promoting optimization of design and operation of wastewater treatment.
Assuntos
Euryarchaeota , Microbiota , Archaea , Bactérias , EsgotosRESUMO
The oxidative stress-related reactive aldehydes 4-hydroxy-2-nonenal (HNE) and 4-oxo-2-nonenal (ONE) have been shown to promote formation of α-synuclein oligomers in vitro. However, the changes in secondary structure of α-synuclein and the kinetics of the oligomerization process are not known and were the focus of this study. Size exclusion chromatography showed that after 1 h of incubation, HNE induced the formation of an oligomeric α-synuclein peak with a molecular weight of about â¼2000 kDa, which coincided with a decreasing â¼50 kDa monomeric peak. With prolonged incubation (up to 24 h) the oligomeric peak became the dominating molecular species. In contrast, in the presence of ONE, a â¼2000 oligomeric peak was exclusively observed after 15 min of incubation and this peak remained constant with prolonged incubation. Western blot analysis of HNE-induced α-synuclein oligomers showed the presence of monomers (15 kDa), SDS-resistant low molecular (30-160 kDa) and high molecular weight oligomers (≥260 kDa), indicating that the oligomers consisted of both covalent and non-covalent protein. In contrast, ONE-induced α-synuclein oligomers only migrated as covalent cross-linked high molecular-weight material (≥300 kDa). Both circular dichroism (CD) and Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy showed that the formation of HNE- and ONE-induced oligomers coincided with a spectral change from random coil to ß-sheet. However, ONE-induced α-synuclein oligomers exhibited a slightly higher degree of ß-sheet. Taken together, our results indicate that both HNE and ONE induce a change from random coil to ß-sheet structure that coincides with the formation of α-synuclein oligomers; albeit through different kinetic pathways depending on the degree of cross-linking.
Assuntos
Aldeídos/química , alfa-Sinucleína/química , Cromatografia em Gel , Dicroísmo Circular , Humanos , Cinética , Peso Molecular , Oxirredução , Multimerização Proteica , Estrutura Secundária de Proteína , Proteínas Recombinantes/químicaRESUMO
Constructing heterojunction photocatalysts are widely applied to boost the photocatalytic activity of materials. Here, a novel covalent organic framework (COF) material with heptazine units was developed and hybridized with TiO2 nano particles (NPs) to fabricate the Heptazine-COF@TiO2 photocatalysts for acetaminophen (AAP) photodegradation. The successfully assembled heptazine unit endows the Heptazine-COF with outstanding semiconductor property (optical bandgap is 2.53â eV). The synthesized Heptazine-COF@TiO2 hybrids is proved to have the heterojunction structure with high visible light activity and fast charge-carrier mobility, and exhibits better performance in photodegradation of AAP under visible light. The excellent photodegradation efficiency (rate constant: 0.758â min-1) and high reusability (rate constant: 0.452â min-1 in the 6thâ cycles) of the optimized sample outperform the traditional inorganic photocatalysts and other heterojunction photocatalysts. In addition, these photocatalysts present universal degradation activity for other dyes and antibiotics.
RESUMO
The occurrence of micropollutants in aquatic media raises great concern because of their biological toxicity and persistence. Herein, visible-light-driven photocatalyst titanium dioxide/graphitic carbon nitride/triiron tetraoxide (TiO2-x/g-C3N4/Fe3O4, TCNF) with oxygen vacancies (Ov) was prepared via a facile hydrothermal-calcination method. The complementary visible-light co-absorption among semiconductors enhances light-harvesting efficiency. The built-in electric field formed during Fermi level alignment drives photoinduced electron transfer to improve charge separation across the interfaces. The increased light-harvesting and favorable energy band bending significantly enhance the photocatalytic performance. Therefore, TCNF-5-500/persulfate system could effectively photodegrade bis-phenol A within 20 min under visible-light irradiation. Moreover, the superior durability, non-selective oxidation, adaptability, and eco-friendliness of the system were confirmed by different reaction conditions and biotoxicity assessment. Furthermore, the photodegradation reaction mechanism was presented according to the major reactive oxygen species produced in the system. Thus, this study constructed a dual step-scheme heterojunction by tuning visible-light absorption and energy band structure to increase the charge transfer efficiency and photogenerated carrier lifetime, which has great potential for environmental remediation using visible photocatalysis.
RESUMO
Since colossal ionic conductivity was detected in the planar heterostructures consisting of fluorite and perovskite, heterostructures have drawn great research interest as potential electrolytes for solid oxide fuel cells (SOFCs). However, so far, the practical uses of such promising material have failed to materialize in SOFCs due to the short circuit risk caused by SrTiO3. In this study, a series of fluorite/perovskite heterostructures made of Sm-doped CeO2 and SrTiO3 (SDC-STO) are developed in a new bulk-heterostructure form and evaluated as electrolytes. The prepared cells exhibit a peak power density of 892 mW cm-2 along with open circuit voltage of 1.1 V at 550 °C for the optimal composition of 4SDC-6STO. Further electrical studies reveal a high ionic conductivity of 0.05-0.14 S cm-1 at 450-550 °C, which shows remarkable enhancement compared to that of simplex SDC. Via AC impedance analysis, it has been shown that the small grain-boundary and electrode polarization resistances play the major roles in resulting in the superior performance. Furthermore, a Schottky junction effect is proposed by considering the work functions and electronic affinities to interpret the avoidance of short circuit in the SDC-STO cell. Our findings thus indicate a new insight to design electrolytes for low-temperature SOFCs.
RESUMO
Central to commercializing metal-air batteries is the development of highly efficient and stable catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this study, a composite catalyst with a unique interpenetrating network (denoted as NiCo2O4@MnO2-CNTs-3) was synthesized and exhibited better bifunctional activity (ΔE = 0.87 V) and durability than both Pt/C and Ir/C catalysts. The improved performance arises from three factors: (i) MnO2 promotes the ORR while NiCo2O4 facilitates the OER; (ii) carbon nanotubes improve the electronic conductivity; and (iii) the highly porous structure enables the adsorption-desorption of O2 and enhances the structural stability. As a result, the primary and rechargeable Zn-air battery affords a high power density and specific capacity (722 mA h g-1), an outstanding discharge stability (255 mW cm-2 after 1000 cycles) and a high cycling stability (over 2280 cycles). Electron microscopy and electrochemical analysis revealed that the degradation of the rechargeable Zn-air battery performance resulted from the damage of the air electrode and the hydrogen evolution reaction on the zinc electrode. A flexible Zn-air battery employing a solid-state electrolyte showed an exciting stability (540 cycles) and high power density (85.9 mW cm-2), suggesting that the anion exchange membrane effectively prevents the migration of Zn2+ ions and the deposition of carbonates.
RESUMO
Sufficiently high oxygen ion conductivity of electrolyte is critical for good performance of low-temperature solid oxide fuel cells (LT-SOFCs). Notably, material conductivity, reliability, and manufacturing cost are the major barriers hindering LT-SOFC commercialization. Generally, surface properties control the physical and chemical functionalities of materials. Hereby, we report a Sm3+, Pr3+, and Nd3+ triple-doped ceria, exhibiting the highest ionic conductivity among reported doped-ceria oxides, 0.125 S cm-1 at 600 °C. It was designed using a two-step wet-chemical coprecipitation method to realize a desired doping for Sm3+ at the bulk and Pr3+/Nd3+ at surface domains (abbreviated as PNSDC). The redox couple Pr3+/Pr4+ contributes to the extraordinary ionic conductivity. Moreover, the mechanism for ionic conductivity enhancement is demonstrated. The above findings reveal that a joint bulk and surface doping methodology for ceria is a feasible approach to develop new oxide-ion conductors with high impacts on advanced LT-SOFCs.
RESUMO
Glass ionomer cements (GIC) are known as a non-bioactive dental cement. During setting the GIC have an acidic pH, driven by the acrylic acid component. It is a challenge to make GIC alkaline without disturbing its mechanical properties. One strategy was to add slowly reacting systems with an alkaline pH. The aim of the present study is to investigate the possibility of forming a bioactive dental material based on the combination of glass ionomer cement and calcium silicates. Two types of GIC were used as control. Wollastonite (CS also denoted ß-CaSiO3) or Mineral Trioxide Aggregate (MTA) was incorporated into the 2 types of GIC. The material formulations' setting time, compressive strength, pH and bioactivity were compared between modified GIC and GIC control. Apatite crystals were found on the surfaces of the modified cements but not on the control GIC. The compressive strength of the cement remained with the addition of 20% calcium silicate or 20% MTA after one day immersion. In addition, the compressive strength of GIC modified with 20% MTA had been increased during the 14 d immersion (p < 0 .05).
Assuntos
Compostos de Alumínio/química , Compostos de Cálcio/química , Cimentos de Ionômeros de Vidro/química , Teste de Materiais/métodos , Óxidos/química , Silicatos/química , Força Compressiva , Combinação de Medicamentos , Concentração de Íons de Hidrogênio , Propriedades de SuperfícieRESUMO
Solid oxide fuel cells (SOFCs) have attracted much attention worldwide because of their potential for providing clean and reliable electric power. However, their commercialization is subject to the high operating temperatures and costs. To make SOFCs more competitive, here we report a novel and attractive nanocomposite hematite-LaCePrOx (hematite-LCP) synthesized from low-cost natural hematite and LaCePr-carbonate mineral as an electrolyte candidate. This heterogeneous composite exhibits a conductivity as high as 0.116 S cm(-1) at 600 °C with an activation energy of 0.50 eV at 400-600 °C. For the first time, a fuel cell using such a natural mineral-based composite demonstrates a maximum power density of 625 mW cm(-2) at 600 °C and notable power output of 386 mW cm(-2) at 450 °C. The extraordinary ionic conductivity and device performances are primarily attributed to the heterophasic interfacial conduction effect of the hematite-LCP composite. These superior properties, along with the merits of ultralow cost, abundant storage, and eco-friendliness, make the new composite a highly promising material for commercial SOFCs.
RESUMO
Cochlear implants (CI) have been used for several decades to treat patients with profound hearing loss. Nevertheless, results vary between individuals, and fine hearing is generally poor due to the lack of discrete neural stimulation from the individual receptor hair cells. A major problem is the deliverance of independent stimulation signals to individual auditory neurons. Fine hearing requires significantly more stimulation contacts with intimate neuron/electrode interphases from ordered axonal re-growth, something current CI technology cannot provide. Here, we demonstrate the potential application of micro-textured nanocrystalline diamond (NCD) surfaces on CI electrode arrays. Such textured NCD surfaces consist of micrometer-sized nail-head-shaped pillars (size 5×5µm(2)) made with sequences of micro/nano-fabrication processes, including sputtering, photolithography and plasma etching. The results show that human and murine inner-ear ganglion neurites and, potentially, neural progenitor cells can attach to patterned NCD surfaces without an extracellular matrix coating. Microscopic methods revealed adhesion and neural growth, specifically along the nail-head-shaped NCD pillars in an ordered manner, rather than in non-textured areas. This pattern was established when the inter-NCD pillar distance varied between 4 and 9µm. The findings demonstrate that regenerating auditory neurons show a strong affinity to the NCD pillars, and the technique could be used for neural guidance and the creation of new neural networks. Together with the NCD's unique anti-bacterial and electrical properties, patterned NCD surfaces could provide designed neural/electrode interfaces to create independent electrical stimulation signals in CI electrode arrays for the neural population. STATEMENT OF SIGNIFICANCE: Cochlear implant is currently a successful way to treat sensorineural hearing loss and deafness especially in children. Although clinically successful, patients' fine hearing cannot be completely restored. One problem is the amount of the electrodes; 12-20 electrodes are used to replace the function of 3400 inner hair cells. Intense research is ongoing aiming to increase the number of electrodes. This study demonstrates the use of nanocrystalline diamond as a potential nerve-electrode interface. Micrometer-sized nanocrystalline diamond pillars showed high affinity to regenerated human neurons, which grew into a pre-defined network based on the pillar design. Our findings are of particular interest since they can be applied on any silicon-based implant to increase electrode count and to achieve individual neuron stimulation patterns.
Assuntos
Implantes Cocleares , Terapia por Estimulação Elétrica/métodos , Estimulação Elétrica , Nanopartículas , Adulto , Animais , Vias Auditivas , Axônios/fisiologia , Adesão Celular , Cloro/química , Surdez/cirurgia , Diamante , Eletrodos , Eletrofisiologia , Feminino , Audição , Humanos , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Microscopia de Fluorescência , Pessoa de Meia-Idade , Neurônios/citologia , Regeneração , Silício/química , Análise Espectral Raman , Gânglio Espiral da Cóclea/fisiologia , Células-Tronco/citologia , Osso Temporal/fisiopatologiaRESUMO
We present an electrical sensor that uses rolling circle amplification (RCA) of DNA to stretch across the gap between two electrodes, interact with metal nanoparticle seeds to generate an electrically conductive nanowire, and produce electrical signals upon detection of specific target DNA sequences. RCA is a highly specific molecular detection mechanism based on DNA probe circularization. With this technique, long single-stranded DNA with simple repetitive sequences are produced. Here we show that stretched RCA products can be metalized using silver or gold solutions to form metal wires. Upon metallization, the resistance drops from TΩ to kΩ for silver and to Ω for gold. Metallization is seeded by gold nanoparticles aligned along the single-stranded DNA product through hybridization of functionalized oligonucleotides. We show that combining RCA with electrical DNA detection produces results in readout with very high signal-to-noise ratio, an essential feature for sensitive and specific detection assays. Finally, we demonstrate detection of 10 ng of Escherichia coli genomic DNA using the sensor concept.