Mercury and Organic Pollutants Removal from Aqueous Solutions by Heterogeneous Photocatalysis with ZnO-Based Materials.

The removal of four Contaminants of Emerging Concern, namely bisphenol A, sulfamethoxazole, diclofenac and benzotriazole; two odorous compounds, geosmin and 2-methylisoborneol, frequently detected in recirculating aquaculture systems; and Hg(II) was investigated using ZnO-based materials doped or co-doped with Ce and Cu under simulated solar radiation. Photocatalysts were synthetized via a hydrothermal route and their efficiency was assessed by changing some operational parameters in different water matrices of increasing complexity. The mixture of contaminants was successfully degraded in just 1 h, while the complete mineralization was achieved in a few hours; experiments performed in an actual aquaculture water confirmed the efficiency and broad versatility of the synthesized materials.

Development and application of high resolution mass spectrometry analytical method to study and identify the photoinduced transformation products of environmental pollutants.

Terpenes are among the major causes of pleasant or unpleasant odors close to active or inactive landfills. We studied R-limonene and p-cymene environmental degradation products using the heterogeneous photocatalysis mediated by titanium dioxide to explore the odor pollution. The aim of the study was the development of mass spectrometry based methods both hyphenated with GC and HPLC to identify and characterize transformation products (TPs) derived from photodegradation of R-limonene and p-cymene. With the GC-MS method we identified three TPs for R-limonene and two for p-cymene comparing the obtained mass spectra with those in the NIST library. While with HPLC-MS method, thanks to the use of the high resolution of MS tool, we recognized four and five TPs for R-limonene and p-cymene respectively. No p-cymene was detected as R-limonene transformation product. The methods developed were then applied to real environmental samples coming from landfills active (Lan1) or inactive (Lan2 and Lan3) located in northern Italy. R-limonene was detected in the active landfill (Lan1 at the concentration of 2.35 µg/mL) together with one of its TPs and one TP derived from p-cymene. p-Cymene was detected in the other two inactive landfills (Lan2 and Lan3 concentrations 0.025 and 0.15 µg/mL, respectively) together with one of its TP and two TPs coming from R-limonene photodegradation. The finding of TPs together with R-limonene and p-cymene both in active and inactive landfills point out the attention on the reduction of these molecules in the environment to reduce pollution and human risks.

Structural elucidation of bisphenol E and bisphenol S photoinduced by-products by high-resolution electrospray ionisation mass spectrometry and tandem mass spectrometry.

RATIONALE: Bisphenol E (BPE) and bisphenol S (BPS) have recently replaced bisphenol A as monomers for producing polycarbonates. However, BPE and BPS can pose hazards as they are known to be endocrine disruptors. Despite the huge increase in their use, there is a lack of data regarding the toxicity and effects of BPE and BPS. METHODS: We investigated the photoinduced transformation of BPE and BPS when subjected to sun-simulated radiation and using TiO2 as a photocatalyst. Analyses of BPE, BPS and their by-products were performed by high-performance liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS) using an orbitrap mass analyzer in negative electrospray ionisation (ESI) mode. The chromatographic separations were achieved by employing a C18 reversed-phase column, and the transformation products (TPs) were elucidated structurally using HRMS and multistage MS experiments performed in collision-induced dissociation (CID) mode. RESULTS: The transformation of bisphenol S involved the formation of twelve by-products, while ten TPs were detected following BPE degradation. For bisphenol S, the cleavage of the molecule is a very important transformation route, together with the hydroxylation of the substrate to provide mono- and poly-hydroxylated TPs. For bisphenol E, the two main routes were hydroxylation and ring opening. Acute toxicity for BPS, BPE and their TPs was assessed using the Vibrio fischeri assay, highlighting that their initial transformation involved the formation of TPs that were more toxic than the parent compound. CONCLUSIONS: The HPLC/HRMS method developed was useful for characterising and identifying newly formed TPs from bisphenol E and bisphenol S. This study aimed to examine the structure of twenty by-products identified during TiO2 -mediated photolysis and to evaluate acute toxicity over time.

Investigation of the Aquatic Photolytic and Photocatalytic Degradation of Citalopram.

This study investigated the direct and indirect photochemical degradation of citalopram (CIT), a selective serotonin reuptake inhibitor (SSRI), under natural and artificial solar radiation. Experiments were conducted in a variety of different operating conditions including Milli-Q (MQ) water and natural waters (lake water and municipal WWT effluent), as well as in the presence of natural water constituents (organic matter, nitrate and bicarbonate). Results showed that indirect photolysis can be an important degradation process in the aquatic environment since citalopram photo-transformation in the natural waters was accelerated in comparison to MQ water both under natural and simulated solar irradiation. In addition, to investigate the decontamination of water from citalopram, TiO2-mediated photocatalytic degradation was carried out and the attention was given to mineralization and toxicity evaluation together with the identification of by-products. The photocatalytic process gave rise to the formation of transformation products, and 11 of them were identified by HPLC-HRMS, whereas the complete mineralization was almost achieved after 5 h of irradiation. The assessment of toxicity of the treated solutions was performed by Microtox bioassay (Vibrio fischeri) and in silico tests showing that citalopram photo-transformation involved the formation of harmful compounds.

The "Lab4treat" Outreach Experience: Preparation of Sustainable Magnetic Nanomaterials for Remediation of Model Wastewater.

The Lab4treat experience has been developed to demonstrate the use of magnetic materials in environmental applications. It was projected in the frame of the European project Mat4Treat, and it was tested several times in front of different audiences ranging from school students to the general public in training and/or divulgation events. The experience lends itself to discuss several aspects of actuality, physics and chemistry, which can be explained by modulating the discussion depth level, in order to meet the interests of younger or more experienced people and expand their knowledge. The topic is relevant, dealing with the recycling of urban waste and water depollution. The paper is placed within the field of water treatment for contaminant removal; therefore, a rich collection of recent (and less recent) papers dealing with magnetic materials and environmental issues is described in the Introduction section. In addition, the paper contains a detailed description of the experiment and a list of the possible topics which can be developed during the activity. The experimental approach makes the comprehension of scientific phenomena effective, and, from this perspective, the paper can be considered to be an example of interactive teaching.

Liquid chromatography/mass spectrometry analytical determination of gabapentin transformation products by heterogeneous photocatalysis and environmental evaluation.

RATIONALE: Gabapentin is a drug used to treat epilepsy and peripheral neuropathic pain. It is an analog of gamma-aminobutyric acid, and it is a selective blocker of voltage-gated calcium channels. The drug is excreted unmetabolized; it is stable in the environment and is classified as a persistent mobile organic contaminant. Because wastewater treatment plants (WWTPs) are not completely efficient, some bioactive molecules may be released unaltered into the environment. The aim of this study was to provide information about degradation pathways of gabapentin in water by studying its photoinduced transformation products (TPs) through laboratory simulation experiments. Gabapentin and its TPs were monitored in influent and effluent water samples from WWTPs in Germany and Italy. METHODS: The laboratory simulation used heterogeneous photodegradation mediated by titanium dioxide (TiO2 ). Chromatographic separation was achieved using a C18 reverse-phase column, and the structural identification of TPs was performed using high-resolution electrospray ionization high-resolution mass spectrometry (ESI-HRMS) and multistage MSn experiments. RESULTS: Several TPs were observed during TiO2 photodegradation. Nine new compounds were detected, and potential structures were assigned by studying the fragmentation pathways of the [M + H]+ ions of these TPs and gabapentin. Gabapentin and some of the newly identified TPs were found in environmental samples from WWTPs. CONCLUSIONS: The developed high-performance liquid chromatography/high-resolution mass spectrometry method was used to identify TPs from gabapentin. It was then successfully applied to real environmental samples to monitor the TPs as potential environmental pollutants.

Photocatalytic abatement of emerging pollutants in pure water and wastewater effluent by TiO2 and Ce-ZnO: degradation kinetics and assessment of transformation products.

Here, the performances of two different catalysts, Ce-ZnO and TiO2 synthetized in our laboratories, were compared with the commercial TiO2-P25 for degradation of a mixture of seven emerging pollutants under UV irradiation. The investigation included monitoring pollutants abatement in Milli-Q water and in wastewater effluent and identifying their transformation products by HPLC-HRMS. Structural characterization of intermediates supported by data available from literature allowed elucidation of the transformation pathways occurring in the presence of all investigated catalysts in the wastewater effluent. Preliminary results showed a good removal efficacy for almost all examined contaminants, even in real water matrix (i.e. wastewater effluent). The type of matrix and catalyst affects the number and/or the abundance of transformation products, which suggests differences in their transformation routes.

High-performance liquid chromatography/high-resolution mass spectrometry for the characterization of transformation products of ionic liquids.

RATIONALE: Ionic liquids (ILs) are a subject of active research in the field of alternative solvents. We studied the behaviour of a piperidine IL, 1-butyl-1-methylpiperidinium tetrafluoroborate (BMPA), through the elucidation of its transformation products (TPs) in water. METHODS: The transformation pathways of BMPA were investigated using high-performance liquid chromatography (HPLC) combined with a hybrid LTQ-Orbitrap instrument on the basis of mass defect filtering. TPs of BMPA were identified by fragmentation patterns and accurate mass measurements. RESULTS: The separation and identification of 32 TPs was achieved. BMPA can be oxidized at different positions in the alkyl chains. The ultimate products corresponds to N-methyl-piperidinium and some byproducts involving ring-opening. Tests of acute toxicity, evaluated with Vibrio Fischeri bacteria, show that BMPA transformation proceeds through the formation of slightly harmful compounds. CONCLUSIONS: Results showed that the main transformation pathways of BMPA were alkyl chain hydroxylation/shortening and de-alkylation, and that HPLC/LTQ-Orbitrap can serve as an important analytical platform to gather the unknown TPs of ILs.

Mass spectrometric fragmentation and photocatalytic transformation of nicotine and cotinine.

RATIONALE: Nicotine and cotinine are, respectively, alkaloids produced mainly by the Solanaceae plant family, especially tobacco, and its most important human metabolite. These compounds are frequently found as contaminants in wastewater or landfill samples and they could be used to evaluate pollution by tobacco use. The aim of this study is to improve the knowledge about possible transformation pathways of nicotine and cotinine. This would help the identification of degradants by using HPLC coupled with a high resolving power mass analyzer (LTQ-Orbitrap). In addition, we evaluated toxicity on bioluminescent photobacteria to indicate possible relationships between the formation of transformation products and their toxic effects. METHODS: The transformation of nicotine and cotinine and the formation of intermediate products were evaluated adopting titanium dioxide as photocatalyst. The structural identification of photocatalytic transformation products of these two alkaloids was based on LC/multistage MS experiments. High-resolution MS allowed the elemental composition of these products to be hypothesized. The evolution of toxicity as a function of the irradiation time was also studied using a bioluminescent photobacterium (Vibrio fischeri) test. RESULTS: Several products were formed and characterized using HPLC/HRMSn . The main photocatalytic pathways involving nicotine and cotinine appear to be hydroxylation, demethylation and oxidation. Nine degradants were formed from nicotine, including cotinine. Seven degradants were generated from cotinine. There is no transformation product in common between the two studied molecules. CONCLUSIONS: The study of photocatalytic degradation allowed us to partially simulate human metabolism and the environmental transformation of the bioactive alkaloid nicotine. We searched for some of the identified transformation products in river water and landfill percolate by solid-phase extraction and HPLC/HRMS and eventually their presence was confirmed. These new findings could be of interest in further metabolism and environmental pollution studies. Copyright © 2016 John Wiley & Sons, Ltd.

Imidazolium-Based Ionic Liquids in Water: Assessment of Photocatalytic and Photochemical Transformation.

The photoinduced transformation of two ionic liquids, 1-methylimidazolium hydrogensulfate (HMIM) and 1-ethyl-3-methylimidazolium hydrogensulfate (EMIM), was investigated under photocatalytic conditions in the presence of irradiated TiO2. We monitored substrate disappearance, transformation products (TPs), degree of mineralization, and toxicity of the irradiated systems. Acute toxicity measures suggested in both cases the occurrence of more toxic TPs than the parent molecules. A total of five TPs were detected by HPLC-HRMS from HMIM and nine from EMIM. Complete mineralization and stoichiometric release of nitrogen was achieved for both compounds within 4 h of irradiation. The photochemical transformation kinetics and pathways in surface waters (direct photolysis and indirect photoreactions) were studied for EMIM, to assess its persistence in sunlit water bodies such as rivers or lakes. Environmental phototransformation would be dominated by direct photolysis, with half-life times of up to one month under fine-weather conditions.

Zeolite Imidazolate Frameworks-8@SiO2-ZrO2 Crystal-Amorphous Hybrid Core-Shell Structure as a Building Block for Water Purification Membranes.

Metal-organic frameworks (MOFs) are emerging as promising materials for water purification membranes, owing to their uniform microporous structures and chemical functionalities. Here, we report a simple procedure for depositing MOF-based nanofiltration membranes on commercial TiO2 ceramic tubular supports, completely avoiding the use of dispersants or binders. Zeolite imidazolate frameworks-8 (ZIF-8) nanocrystals were synthesized in methanol at room temperature and subsequently coated with an amorphous SiO2-ZrO2 gel to generate a dispersion of ZIF-8@SiO2-ZrO2 core-shell nanoparticles. The amorphous SiO2-ZrO2 gel served as a binding agent for the ZIF-8 nanocrystals, thus forming a defect-free continuous membrane layer. After repeating the coating twice, the active layer had a thickness of 0.96 µm, presenting a rejection rate >90% for the total organic carbon in an aquaculture effluent and in a wastewater treatment plant, while reducing the concentration of trimethoprim, here used as a target pollutant. Moreover, the oxide gel provided the MOF-based active layer with good adhesion to the support and enhanced its hydrophilicity, resulting in a membrane with excellent mechanical stability and resistance to fouling during the crossflow filtration of the real wastewater samples. These results implied the high potential of the MOF-based nanocomposite membrane for effective treatment of actual wastewater streams.

Study of the photocatalytic transformation of synephrine: a biogenic amine relevant in anti-doping analysis.

The occurrence of some cases of positive results in anti-doping analysis of octopamine requires clarification as to whether its methylated derivative synephrine could be a metabolic precursor of octopamine itself. Synephrine is a natural phenylethylamine derivative present in some food supplements containing Citrus aurantium, permitted in sport regulations. A simulative laboratory study had been done using a photocatalytic process, to identify all possible main and secondary transformation products, in a clean matrix; these were then sought in biological samples obtained from three human volunteers and four rats treated with synephrine; the parent compound and its new potential metabolic products were investigated in human urine and rat plasma samples. The transformation of synephrine and octopamine and the formation of intermediate products were evaluated, adopting titanium dioxide as photocatalyst. Several products were formed and characterized using the HPLC-HRMS(n) technique. The main intermediates identified in these experimental conditions were compared with the major synephrine metabolites found in in vivo studies on rats and humans. Some more oxidized species, already formed in the photocatalytic process, were also found in urine and plasma samples of treated animals. These new findings could be of interest in further metabolism studies. The main photocatalytic pathway involving synephrine appears to be N-demethylation to give octopamine. On the contrary, we demonstrate the inconsistency of this reaction in both rat and human in vivo determinations, resulting in forensic importance.

Biomimetic photooxidation of noscapine sensitized by a riboflavin derivative in water: The combined role of natural dyes and solar light in environmental remediation.

Noscapine (NSC) is a benzyl-isoquinoline alkaloid discovered in 1930 as an antitussive agent. Recently, NSC has also been reported to exhibit antitumor activity and, according to computational studies, it is able to attack the protease enzyme of Coronavirus (COVID-19) and thus could be used as antiviral for COVID-19 pandemic. Therefore, an increasing use of this drug could be envisaged in the coming years. NSC is readily metabolized with a half-life of 4.5 h giving rise to cotarnine, hydrocotarnine, and meconine, arising from the oxidative breaking of the CC bond between isoquinoline and phthalide moieties. Because of its potentially increasing use, high concentrations of NSC but also its metabolites will be delivered in the environment and potentially affect natural ecosystems. Thus, the aim of this work is to investigate the degradation of NSC in the presence of naturally occurring photocatalysts. As a matter of fact, the present contribution has demonstrated that NSC can be efficiently degraded in the presence of a derivative of the natural organic dye Riboflavin (RFTA) upon exposure to visible light. Indeed, a detailed study of the mechanism involved in the photodegradation revealed the similarities between the biomimetic and the photocatalyzed processes. In fact, the main photoproducts of NSC were identified as cotarnine and opianic acid based on a careful UPLC-MS2 analysis compared to the independently synthesized standards. The former is coincident with one of the main metabolites obtained in humans, whereas the latter is related to meconine, a second major metabolite of NSC. Photophysical experiments demonstrated that the observed oxidative cleavage is mediated mainly by singlet oxygen in a medium in which the lifetime of 1O2 is long enough, or by electron transfer to the triplet excited state of RFTA if the photodegradation occurs in aqueous media, where the 1O2 lifetime is very short.

Integrated approach for the analysis of neonicotinoids in fruits and food matrices.

We searched for five neonicotenoids (namely acetamiprid, clothianidin, imidacloprid, thiacloprid and thiamethoxam) in 67 samples of fruits, leaves, pollen and honey via HPLC-MS by employing QueChERs for extraction and purification. Clothianidin was never detected, while imidacloprid was identified in apple (9.2 µg/kg) and pollen (18-28 µg/Kg), thiacloprid in peaches (21-35 µg/kg) and acetamiprid was identified in the hazel leaves (1266 µg/kg), honey (13-26 µg /Kg) and pollen (11-24 µg/kg). Since the levels found of acetamiprid in hazel, honey and pollen were concerning, we accomplished a study to identify and characterize the possible transformation products via a laboratory simulation. The methodology exploited the analysis by HPLC-HRMS and its application in all matrices. We identify twelve transformation products, whose formation involved dimerization, hydroxylation, oxidation, demethylation and cleavage of the molecule. Three of them were also detected in hazel leaves.

Natural solar activation of modified zinc oxides with rare earth elements (Ce, Yb) and Fe for the simultaneous disinfection and decontamination of urban wastewater.

This study investigates the capability of modified zinc oxides (ZnO) with Ce, Yb and Fe towards the simultaneous inactivation of pathogenic bacteria (Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa) and Contaminants of Emerging Concern (CECs, Diclofenac, Sulfamethoxazole and Trimethoprim) under natural sunlight. Several catalyst loads (from 0 to 500 mg/L) were assessed as proof-of principle in isotonic solution followed by the evaluation of organic matter effect in simulated and actual urban wastewater (UWW), using bare TiO2-P25 as reference. The order of photocatalysts efficiency for both bacterial and CECs removal was: ZnO-Ce â‰… TiO2-P25 > ZnO-Yb > ZnO-Fe > photolysis > darkness in all water matrices. The best photocatalytic performance for water disinfection and decontamination was obtained with 500 mg/L of ZnO-Ce: 80% of ∑CECs removal after 45 min (4.4 kJ/L of accumulated solar UV-A energy (QUV)) and the total inactivation of bacteria (Detection Limit of 2 CFU/mL) after 120 min (14 kJ/L of QUV) in UWW. The microbial and CECs abatement mechanism was described based on the generation of hydroxyl radicals, which was experimentally demonstrated for ZnO-Ce. Additionally, no significant release of Zn2+ and Ce was detected after the solar exposure. These results point out for the first time the capability of ZnO-Ce for the simultaneous UWW disinfection and decontamination under natural sunlight.

UV-Cured Chitosan and Gelatin Hydrogels for the Removal of As(V) and Pb(II) from Water.

In this study, new photocurable biobased hydrogels deriving from chitosan and gelatin are designed and tested as sorbents for As(V) and Pb(II) removal from water. Those renewable materials were modified by a simple methacrylation reaction in order to make them light processable. The success of the reaction was evaluated by both 1H-NMR and FTIR spectroscopy. The reactivity of those formulations was subsequently investigated by a real-time photorheology test. The obtained hydrogels showed high swelling capability reaching up to 1200% in the case of methacrylated gelatin (GelMA). Subsequently, the Z-potential of the methacrylated chitosan (MCH) and GelMA was measured to correlate their electrostatic surface characteristics with their adsorption properties for As(V) and Pb(II). The pH of the solutions proved to have a huge influence on the As(V) and Pb(II) adsorption capacity of the obtained hydrogels. Furthermore, the effect of As(V) and Pb(II) initial concentration and contact time on the adsorption capability of MCH and GelMA were investigated and discussed. The MCH and GelMA hydrogels demonstrated to be promising sorbents for the removal of heavy metals from polluted waters.

Occurrence and Human Health Risk Assessment of Pharmaceuticals and Hormones in Drinking Water Sources in the Metropolitan Area of Turin in Italy.

Pharmaceuticals and hormones (PhACs) enter the aquatic environment in multiple ways, posing potential adverse effects on non-target organisms. They have been widely detected in drinking water sources, challenging water companies to reassure good quality drinking water. The aim of this study was to evaluate the concentration of sixteen PhACs in both raw and treated drinking water sources in the Metropolitan Area of Turin-where Società Metropolitana Acque Torino (SMAT) is the company in charge of the water cycle management-and evaluate the potential human health risks associated to these compounds. Multivariate spatial statistical analysis techniques were used in order to characterize the areas at higher risk of pollution, taking into account the already existing SMAT sampling points' network. Health risks were assessed considering average detected concentrations and provisional guideline values for individual compounds as well as their combined mixture. As reported in the just-issued Drinking Water Directive 2020/2184/UE, in order to establish priority substances, a risk assessment of contaminants present in raw drinking water sources is required for monitoring, identifying potential health risks and, if necessary, managing their removal. The results showed negligibly low human health risks in both raw water sources and treated water.

Photocatalytic degradation of drugs in water mediated by acetylated riboflavin and visible light: A mechanistic study.

There is a current concern, among the scientific community, on the pollutants classified as "persistent organic pollutants (POPs)". Pharmaceuticals and personal care products (PPCPs) belong to this family of contaminants; therefore, it is necessary to find more efficient techniques able to achieve their removal from the environment. This study focuses on two different pharmaceuticals: carbamazepine and atenolol, chosen for their widespread use and their different chemical and medical properties. In this work, an organic dye, acetylated riboflavin, has been used in combination with visible light to achieve the photodegradation of these two POPs in <2 h. Moreover, photophysical experiments demonstrated the involvement of the singlet and triplet excited states of acetylated riboflavin and the generated singlet oxygen in the removal of these drugs. Besides, a detailed UFLC-MS-MS analysis of the photoproducts confirmed the oxidation of the drugs. Finally, a plausible mechanism has been postulated.

Non-purified commercial multiwalled carbon nanotubes supported on electrospun polyacrylonitrile@polypyrrole nanofibers as photocatalysts for water decontamination.

We present a photoactive composite material for water decontamination consisting of non-purified commercial multiwalled carbon nanotubes (CNT(NP)s) supported on an electrospun polymeric mat made of core-sheath polyacrylonitrile-polypyrrole nanofibers. This is the first system that specifically exploits the superior photocatalytic activity of CNT(NP)s compared with the purified carbon nanotubes usually employed. A CNT(NP) still contains the catalytic metal oxide nanoparticles (NPs) used for its synthesis, embedded in the nanotube structure. Under UV-visible irradiation, these NPs generate highly reactive ˙OH radicals capable of degrading the organic molecules adsorbed on the nanotube. Photocatalytic tests on the composite material show that CNT(NP)s act mostly as a source of photogenerated charge carriers. The adsorption of target substrates occurs preferentially onto the polypyrrole sheath, which shuttles the reactive carriers from CNT(NP)s to the substrates. In addition, UV-visible irradiation of semiconducting polypyrrole generates radical species that directly react with the adsorbed substrates. All synthetic procedures reported are scalable and sustainable. This mechanically resistant and flexible composite overcomes one of the weakest aspects of water treatments that employ suspended nanocatalysts, namely the expensive and poorly scalable recovery of the catalyst through nanofiltration. All these features are required for large-scale photocatalytic treatments of polluted water.

Elucidation of the photoinduced transformations of Aliskiren in river water using liquid chromatography high-resolution mass spectrometry.

Aliskiren was selected as a compound of potential concern among a suspect screening list of more than 40,000 substances on a basis of high occurrence, potential risk and the absence of information about its environmental fate. This study investigated the photoinduced degradation of aliskiren in river water samples spiked at trace levels exposed to simulated sunlight. A half-life time of 24 h was observed with both direct and indirect photolysis playing a role on pollutant degradation. Its photo-induced transformation involved the formation of six transformation products (TPs), elucidated by LC-HRMS - resulted from the drug hydroxylation, oxidation and moieties loss with subsequent cyclization structurally. The retrospective suspected analysis performed on a total of 754 environmental matrices evidenced the environmental occurrence of aliskiren and two TPs in surface waters (river and seawater), fresh water, sediments and biota. In silico bioassays suggested that aliskiren degradation undergoes thought the formation of TPs with distinct toxicity comparing with the parent compound.