TMJ anterior disc displacement anchorage surgery: a retrospective study based on a suture-free titanium screw strategy.

OBJECTIVE: To evaluate the feasibility and effectiveness of using a suture-free titanium screw in repositioning anterior disc displacement without reduction (ADDwoR) of the temporomandibular joint (TMJ). METHODS: A consecutive sample of twelve patients (fifteen joints) was included in this study. All patients were diagnosed with ADDwoR and showed limited mouth opening or temporomandibular joint pain symptoms. Suture-free titanium screw was placed in the condyle directly following the disc repositioning. Pre- and postoperative evaluation parameters include operation time, the visual analogue scale for pain (VAS), lateral excursion movements (LEM), maximum interincisal opening (MIO), and disc length and position on MRI. In addition, the mandibular condyle height was also measured. Statistical significance was considered when p < 0.05. RESULTS: The unilateral operation time was 58.54 ± 5.43 min; during the 6-month period after the operation, the VAS values decreased from 87 ± 6.34 to 14.08 ± 6.65. The MIO increased from 30.07 ± 4.73 to 39.89 ± 1.69 mm (p = 0.01). The TMJ disc length was prolonged from 8.23 ± 1.12 to 11.51 ± 1.29 mm. The condyles showed significant remodeling, and the height of the condyle increased from 18.24 ± 4.12 increase to 19.6 ± 4.31 mm. The LEM was increased from 5.27 ± 0.51 to 6.36 ± 0.62 mm. The MRI images showed the stability of the disc in position during the opening and closing of the mouth. The TMJ disc position was stable during the follow-up period. CONCLUSION: Anteriorly displaced articular disc can be repositioned by a suture-free titanium screw strategy. This technique is an alternative method to address ADDwoR.

Studying positional changes of the disc-condyle-fossa complex in ADDWoR patients after TMJ disc repositioning surgery.

OBJETIVES: To investigate the positional changes in the temporomandibular joint (TMJ) disc-condyle-fossa complex of patients with anterior disc displacement without reduction (ADDWoR) and to evaluate the effect of disc repositioning (DR) surgery. MATERIAL AND METHODS: Fifteen patients with unilateral ADDWoR (30 joints) were included. MRI of the TMJ was performed at T0 (1 week before surgery), T1 (1 month after surgery), and T2 (9-12 months after surgery). The glenoid fossa, disc, and condyle were reconstructed and analyzed using Mimics software. RESULTS: In the patients with unilateral ADDWoR, the disc on the ADD side showed a tendency to downward shift in the coronal direction and forward shift in the sagittal direction; the condyle of ADD side showed a tendency to backward shift in the sagittal direction and upward shift in the coronal direction. When comparing the same ADDwoR TMJ at T0, T1, and T2, the disc was found to move upward and backward after DR surgery at T1 and T2, and the condyle was found to move upward and backward after DR surgery at T1 but returned to the original position at T2. CONCLUSIONS: ADDWoR leads to forward and downward displacement of the disc relative to the condyle and upward displacement of the condyle relative to the tuberosity. DR surgery improved upon the structural abnormalities of the TMJ complex, for which stability was maintained as determined in the 9 to 12 month postoperative follow-up. CLINIC RELEVANCE: DR surgery effectively and constantly improves the positional abnormalities of the TMJ complex.

Near-Infrared Light-Activated Mesoporous Polydopamine for Temporomandibular Joint Osteoarthritis Combined Photothermal-Chemo Therapy.

The treatments generally employed for temporomandibular joint osteoarthritis (TMJOA) involve physical therapy and chemotherapy, etc., whose therapeutic efficacies are impaired by the side effects and suboptimal stimulus responsiveness. Although the intra-articular drug delivery system (DDS) has shown effectiveness in addressing osteoarthritis, there is currently little reported research regarding the use of stimuli-responsive DDS in managing TMJOA. Herein, we prepared a novel near-infrared (NIR) light-sensitive DDS (DS-TD/MPDA) by using mesoporous polydopamine nanospheres (MPDA) as NIR responders and drug carriers; diclofenac sodium (DS) as the anti-inflammatory medication; and 1-tetradecanol (TD) with a phase-inversion temperature of 39 °C as the drug administrator. Upon exposure to 808 nm NIR laser, DS-TD/MPDA could raise the temperature up to the melting point of TD through photothermal conversion, and intelligently trigger DS release. The resultant nanospheres exhibited an excellent photothermal effect and effectively controlled the release of DS through laser irradiation to accommodate the multifunctional therapeutic effect. More importantly, the biological evaluation of DS-TD/MPDA for TMJOA treatment was also performed for the first time. The experiments' results demonstrated that DS-TD/MPDA displayed a good biocompatibility in vitro and in vivo during metabolism. After injection into the TMJ of rats afflicted with TMJOA induced by unilateral anterior crossbite for 14 days, DS-TD/MPDA could alleviate the deterioration of TMJ cartilage, thus ameliorating osteoarthritis. Therefore, DS-TD/MPDA could be a promising candidate for photothermal-chemotherapy for TMJOA.

Morphological changes of TMJ disc in surgically treated ADDwoR patients: a retrospective study.

BACKGROUND: This study aimed to quantify the morphological changes of temporomandibular joint (TMJ) discs after disc repositioning surgery using the three-dimensional (3D) modeling. METHODS: Thirty patients who diagnosed with unilateral ADDwoR were included to compare the morphological differences between ADDWoR discs and normal discs, and fifteen patients who experienced unilateral or bilateral disc repositioning surgery were included to analyze the morphological changes before and after disc repositioning surgery. Disc 3D reconstruction and analyses were performed using magnetic resonance imaging (MRI) data. RESULTS: In the unilateral ADDwoR patients, volume, superficial area, length, and maximum longitudinal-sectional area of the ADDwoR disc were significantly smaller compared with the non-affected discs. However, there was no significant difference in width and cross-sectional areas between ADDwoR discs and non-affected discs. In patients who subjected to disc repositioning surgery, disc volume, superficial area, length, width and maximum longitudinal-sectional area of TMJ discs were markedly increased 6 months after surgery. CONCLUSIONS: This study demonstrated that the TMJ discs tended to be morphologically smaller in volume and shorter in length under ADDwoR status. Importantly, the ADDwoR discs tended to morphologically recover toward non-affected discs after 6 months follow-up following TMJ disc repositioning surgery.

TLR4 contributes to the damage of cartilage and subchondral bone in discectomy-induced TMJOA mice.

The abundance of inflammatory mediators in injured joint indicates innate immune reactions activated during temporomandibular joint osteoarthritis (TMJOA) progression. Toll-like receptor 4 (TLR4) can mediate innate immune reaction. Herein, we aimed to investigate the expression profile and effect of TLR4 in the cartilage and subchondral bone of the discectomy-induced TMJOA mice. The expression of TLR4 and NFκB p65 in the synovium of TMJOA patients was measured by immunohistochemistry, Western blotting and RT-PCR. H&E and Masson staining were utilized to assess the damage of cartilage and subchondral bone of the discectomy-induced TMJOA mice. A TLR4 inhibitor, TAK-242, was used to assess the effect of TLR4 in the cartilage and subchondral bone of the discectomy-induced TMJOA mice by Safranin O, micro-CT, immunofluorescence and immunohistochemistry. Western blotting was used to quantify the expression and effect of TLR4 in IL-1ß-induced chondrocytes. The expression of TLR4 and NFκB p65 was elevated in the synovium of TMJOA patients, compared with the normal synovium. TLR4 elevated in the damaged cartilage and subchondral bone of discectomy-induced TMJOA mice, and the rate of TLR4 expressing chondrocytes positively correlated with OA score. Intraperitoneal injections of TAK-242 ameliorate the extent of TMJOA. Furthermore, TLR4 promotes the expression of MyD88/NFκB, pro-inflammatory and catabolic mediators in cartilage of discectomy-induced TMJOA. Besides, TLR4 participates in the production of MyD88/NFκB, pro-inflammatory and catabolic mediators in IL-1ß-induced chondrocytes. TLR4 contributes to the damage of cartilage and subchondral bone in discectomy-induced TMJOA mice through activation of MyD88/NFκB and release of pro-inflammatory and catabolic mediators.

Role of synovium-derived fibrous cartilage in temporomandibular joint synovial chondromatosis.

BACKGROUND: Synovial chondromatosis (SC) of temporomandibular joint (TMJ) occupies 3% SC cases. In other joints like hip and knee which were composed hyaline cartilage (HC), loose bodies (LBs) were reported to be a HC feature. However, condyle surface and disc in TMJ are fibrous cartilage (FC). Therefore, we proposed a different pathogenesis of TMJSC. METHODS: LBs and synovium were collected from seven TMJSC patients, and histological and immunohistological examinations were performed. RESULTS: Three ways of HC formation were discovered: regular-shaped cartilaginous nodules (CNs) in sublining layer (SL) of vascularized synovium, regional chondrification of SL, and finger-like tissue with a tail attaching to synovium. Detached LBs could fuse and were only positively stained by aggrecan. Without synovium attachment to LBs, fused LBs remained a hyaline extracellular matrix (ECM). However, after synovium attachment, transformation from HC to FC occurred. Two types of FC were observed. First type FC was featured by vertical-distributed type I collagen fibers imbedding few chondrocytes, suggesting mature phase with superior mechanical features. Second type FC was featured by medium-density chondrocytes with type I collagen and aggrecan-positive ECM, suggesting primary phase. The transformation process started in appearance of 2nd type FC deriving from synovium covering LB, and gradually replaced HC from periphery to center. CONCLUSIONS: Three ways of HC formation were closely related. Different with SC in other joints, hyaline ECM in LBs of TMJSC could be replaced by FC deriving from synovium, during which 2nd type FC first replaced HC and then transformed to 1st type FC.

HMGB1-induced angiogenesis in perforated disc cells of human temporomandibular joint.

High mobility group 1 protein (HMGB1), a highly conserved nuclear DNA-binding protein and inflammatory mediator, has been recently found to be involved in angiogenesis. Our previous study has demonstrated the elevation of HMGB1 in the tissue of perforated disc of temporomandibular joint (TMJ). Here, we investigated a novel mediator of HMGB1 in regulating hypoxia-inducible factor-1α (HIF-1α) and vascular endothelial growth factor (VEGF) to mediate angiogenesis in perforated disc cells of TMJ. HMGB1 increased the expression of HIF-1α and VEGF in a dose- and time-dependent manner in these cells. Moreover, immunofluorescence assay exhibits that the HIF-1α were activated by HMGB1. In addition, HMGB1 activated extracellular signal-related kinase 1/2 (Erk1/2), Jun N-terminal kinase (JNK), but not P38 in these cells. Furthermore, both U0126 (ErK inhibitor) and SP600125 (JNK inhibitor) significantly suppressed the enhanced production of HIF-1α and VEGF induced by HMGB1. Tube formation of human umbilical vein endothelial cells (HUVECs) was significantly increased by exposure to conditioned medium derived from HMGB1-stimulated perforated disc cells, while attenuated with pre-treatment of inhibitors for VEGF, HIF-1α, Erk and JNK, individually. Therefore, abundance of HMGB1 mediates activation of HIF-1α in disc cells via Erk and JNK pathway and then, initiates VEGF secretion, thereby leading to disc angiogenesis and accelerating degenerative change of the perforated disc.

Comparative Analysis and Regeneration Strategies for Three Types of Cartilage.

Cartilage tissue, encompassing hyaline cartilage, fibrocartilage, and elastic cartilage, plays a pivotal role in the human body due to its unique composition, structure, and biomechanical properties. However, the inherent avascularity and limited regenerative capacity of cartilage present significant challenges to its healing following injury. This review provides a comprehensive analysis of the current state of cartilage tissue engineering, focusing on the critical components of cell sources, scaffolds, and growth factors tailored to the regeneration of each cartilage type.We explore the similarities and differences in the composition, structure, and biomechanical properties of the three cartilage types and their implications for tissue engineering. A significant emphasis is placed on innovative strategies for cartilage regeneration, including the potential for in situ transformation of cartilage types through microenvironmental manipulation, which may offer novel avenues for repair and rehabilitation.The review underscores the necessity of a nuanced approach to cartilage tissue engineering, recognizing the distinct requirements of each cartilage type while exploring the potential of transforming one cartilage type into another as a flexible and adaptive repair strategy. Through this detailed examination, we aim to broaden the understanding of cartilage tissue engineering and inspire further research and development in this promising field.

Micron/Submicron Scaled Hierarchical Ti Phosphate/Ti Oxide Hybrid Coating on 3D Printed Scaffolds for Improved Osteointegration.

Three-dimensional (3D) printed implants have attracted substantial attention in the field of personalized medicine, but negative impacts on mechanical properties or initial osteointegration have limited their application. To address these problems, we prepared hierarchical Ti phosphate/Ti oxide (TiP-Ti) hybrid coatings on 3D printed Ti scaffolds. The surface morphology, chemical composition, and bonding strength of the scaffolds were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle measurement, X-ray diffraction (XRD), and scratch test. In vitro performance was analyzed by colonization and proliferation of rat bone marrow mesenchymal stem cells (BMSCs). In vivo osteointegration of the scaffolds in rat femurs was assessed by micro-CT and histological analyses. The results demonstrated improved cell colonization and proliferation as well as excellent osteointegration obtained by incorporation of our scaffolds with the novel TiP-Ti coating. In conclusion, micron/submicron scaled Ti phosphate/Ti oxide hybrid coatings on 3D printed scaffolds have promising potential in future biomedical applications.

Decellularized-disc based allograft and xenograft prosthesis for the long-term precise reconstruction of temporomandibular joint disc.

Currently, no effective disc reconstruction treatment strategy is clinically available for temporomandibular joint (TMJ) disc-related diseases. To address this, we developed a prosthesis construct with laser-drilled decellularized natural disc reinforced by polycaprolactone, which mimics the natural morphology, and structural, biomechanical and biological property of the TMJ disc. The construct demonstrated good biocompatibility, safety and immunological tolerance both in vitro, and in a rat subcutaneous model. During 6 months implantation in an allogeneic rabbit TMJ disc reconstruction model, the disc prosthesis maintained its integrity, collagen fiber-orientation, mechanical property, joint structural stability and prevented articular cartilage and bone from damage. Furthermore, the "upgraded" disc prosthesis obtained from decellularized porcine disc was implanted into a goat TMJ disc reconstruction model. The xenograft prosthesis, with strength and viscoelasticity similar to a natural TMJ disc, was able to restore the structure and function of TMJ up to 20 weeks. These results demonstrate the translational feasibility of an allogeneic or xenogeneic decellularized disc prosthesis for treatment of advanced TMJ disc-related diseases. STATEMENT OF SIGNIFICANCE: This study makes a significant contribution to TMJ disc disease treatment both in theory and in clinics, because: (1) it provided an innovative approach to prepare an artificial TMJ disc with decent mechanical properties and long-term condyle-protecting effect; (2) it specified an advanced decellularized method for fibrocartilage decellularization and xenograft application; (3) it developed a facile and reproducible TMJ disc reconstruction model not only for middle size animal but also for large animal study; (4) the comprehensive and unreported biomechanical tests on the natural TMJ discs would act as a valuable reference for further research in the field of artificial TMJ disc materials or TMJ disc tissue engineering; (5) it suggested a potential treatment for patients with severe TMJ diseases that were commonly met but difficult to treat in clinics.

Classification for treatment of adult temporomandibular joint ankylosis and its secondary malformations / 口腔疾病防治

Objective@#To generate a new classification for adult temporomandibular joint ankylosis (TMJA), which could effectively guide treatment strategies for adult TMJA patients with various clinical features. @* Methods@# We developed a new "CD" classification system according to the preservation of the condyle (C) and the severity of dentofacial bone deformity (D). From January 2016 to April 2020, 56 TMJ patients (with 73 ankylosed joints) in our department were classified into 4 subgroups by ‘CD’ classification: condylar head preservation but no dentofacial deformities (C+D-), no condylar head preservation and no dentofacial deformities (C-D-), condylar head preservation and dentofacial deformities (C+ D+), and no condylar head preservation but dentofacial deformities (C-D+). Different strategies were used according to the clinical features of each subgroup. The clinical outcomes of these patients were analyzed. Different treatment strategies of temporomandibular joint reconstruction were adopted for different subclasses of patients and were followed. "C +": lateral arthroplasty (LAP) was used to remove the rigidity and preserve the medial residual condyle. "C-": if the ankylosing bone ball is small and the loss of ascending branch height is not obvious, arthroplasty should be performed to relieve ankylosis; however, if the ankylosing bone ball is large and the ascending branch height decreases significantly, joint reconstruction should be carried out after the ankylosis is relieved. "D +": surgical treatment of secondary dental and maxillofacial malformations at the same time or over stages. "D-": orthodontic treatment after operation to improve occlusal relationship and symptomatic treatment of oral diseases. @*Results@#After treatment, all 73 ankylosed joints were completely released, and the average maximal interincisal opening increased from (3.6±3.2 )to (32.8 ± 5.4) mm (P<0.001), with no recurrence of ankylosis found during the 12-48 month follow-up period.@*Conclusion @#The generation and elaboration of a ‘CD’ classification system is intended to help as a TMJA reconstruction guide for adult TMJA treatment and be widely used in more hospitals.