Anti-SASP and anti-inflammatory activity of resveratrol, curcumin and ß-caryophyllene association on human endothelial and monocytic cells.

A challenging and promising new branch of aging-related research fields is the identification of natural compounds able to modulate the senescence-associated secretory phenotype (SASP), which characterizes senescent cells and can contribute to fuel the inflammaging. We investigated both the anti-SASP and anti-inflammatory activities of a nutritional supplement, namely Fenoxidol™, composed of turmeric extract bioCurcumin (bCUR), Polydatin (the natural glycosylated precursor of Resveratrol-RSV), and liposomal ß-caryophyllene (BCP), in two human cellular models, such as the primary endothelial cell line, HUVECs and the monocytic cell line, THP-1. Replicative and Doxorubicin-induced senescent HUVECs, both chosen as cellular models of SASP, and lipopolysaccharides (LPS)-stimulated THP-1, selected as a model of the inflammatory response, were treated with the three single natural compounds or with a combination of them (MIX). In both senescent HUVEC models, MIX treatment significantly reduced IL-1ß and IL-6 expression levels and p16ink4a protein, and also increased SIRT1 protein level, as well as downregulated miR-146a and miR-21 expression, two of the so-called inflamma-miRNAs, more effectively than the single compounds. In THP-1 cells stimulated with LPS, the MIX showed a significant effect in decreasing IL-1ß, IL-6, TNF-α, and miR-146a expression levels and Caspase-1 activation, in association with an up-regulation of SIRT1 protein, compared to the single compounds. Overall, our results suggest that the three analysed compounds can have a combined effect in restraining SASP in senescent HUVECs as well as the inflammatory response in LPS-stimulated THP-1 cells.

Microparticles-in-Thermoresponsive/Bioadhesive Hydrogels as a Novel Integrated Platform for Effective Intra-articular Delivery of Triamcinolone Acetonide.

Intra-articular (IA) injection of thermoresponsive hydrogels coupled with microparticles (MPs) possess the benefit of sustaining the anti-inflammatory drug effect within the joint cavity for rheumatoid arthritis treatment. Star-shaped thermoresponsive poly(polyethylene glycol) methacrylate [Poly(PEGMA)] copolymers were synthesized using free radical polymerization technique and fully characterized. Triamcinolone acetonide (TA)-loaded PLA/mPEG-PDL MPs, previously optimized, were integrated into the synthesized copolymer solutions at various concentrations and tested for their gelation temperatures. The MPs-in-hydrogel formulations were characterized using scanning electron microscope (SEM), viscosity measurements, ex vivo bioadhesion, and in vitro release studies. The anti-inflammatory effect of integrated systems was assessed in adjuvant-induced monoarthritic rat knee joints and compared to Kenacort and TA-loaded MPs. Two copolymers were successfully synthesized; G-1 = poly(PEGMA188-ME-co-PEGMA475-ME) and G-2 = poly(PEGMA246-EE-co-PEGMA475-ME). Using the tube inversion technique, the gel formation was found dependent on copolymer concentration. An irreversible aggregation was obtained at copolymer concentrations ≤10% (w/v), while a gel was formed at 20 and 30% (w/v) of both copolymers upon increasing temperature. The MP-hydrogel formulations were optimized at 20 and 30% (w/v) of G-1 and G-2 with gelation temperatures of 33 and 37 °C, respectively. SEM images revealed the porous microstructures of hydrogels and their adsorption on MP surfaces. The integrated formulas showed pseudoplastic behaviors, while the bioadhesion study confirmed their bioadhesiveness on excised cartilage. The in vitro release study confirmed drug sustainment from MPs-hydrogels compared to MPs. In vivo studies proved the superiority of MP-in-hydrogels in treatment of induced arthritis, relative to Kenacort and MPs alone, suggesting the applicability of this integrated platform in IA drug delivery.

Incorporation of PEGylated δ-decalactone into lipid bilayers: thermodynamic study and chimeric liposomes development.

Liposomes have been on the market as drug delivery systems for over 25 years. Their success comes from the ability to carry toxic drug molecules to the appropriate site of action through passive accumulation, thus reducing their severe side effects. However, the need for enhanced circulation time and site and time-specific drug delivery turned research focus on other systems, such as polymers. In this context, novel composites that combine the flexibility of polymeric nanosystems with the properties of liposomes gained a lot of interest. In the present work a mixed/chimeric liposomal system, composed of phospholipids and block copolymers, was developed and evaluated in regards with its feasibility as a drug delivery system. These innovative nano-platforms combine advantages from both classes of biomaterials. Thermal analysis was performed in order to offers an insight into the interactions between these materials and consequently into their physicochemical characteristics. In addition, colloidal stability was assessed by monitoring z-potential and size distribution over time. Finally, their suitability as carriers for biomedical applications was evaluated by carrying out in vitro toxicity studies.

Engineered Multifunctional Albumin-Decorated Porous Silicon Nanoparticles for FcRn Translocation of Insulin.

The last decade has seen remarkable advances in the development of drug delivery systems as alternative to parenteral injection-based delivery of insulin. Neonatal Fc receptor (FcRn)-mediated transcytosis has been recently proposed as a strategy to increase the transport of drugs across the intestinal epithelium. FcRn-targeted nanoparticles (NPs) could hijack the FcRn transcytotic pathway and cross the epithelial cell layer. In this study, a novel nanoparticulate system for insulin delivery based on porous silicon NPs is proposed. After surface conjugation with albumin and loading with insulin, the NPs are encapsulated into a pH-responsive polymeric particle by nanoprecipitation. The developed NP formulation shows controlled size and homogeneous size distribution. Transmission electron microscopy (TEM) images show successful encapsulation of the NPs into pH-sensitive polymeric particles. No insulin release is detected at acidic conditions, but a controlled release profile is observed at intestinal pH. Toxicity studies show high compatibility of the NPs with intestinal cells. In vitro insulin permeation across the intestinal epithelium shows approximately fivefold increase when insulin is loaded into FcRn-targeted NPs. Overall, these FcRn-targeted NPs offer a toolbox in the development of targeted therapies for oral delivery of insulin.

Nanoparticles Based on Linear and Star-Shaped Poly(Ethylene Glycol)-Poly(ε-Caprolactone) Copolymers for the Delivery of Antitubulin Drug.

PURPOSE: Biodegradable polymeric nanoparticles of different architectures based on polyethylene glycol-co-poly(ε-caprolactone) block copolymers have been loaded with noscapine (NOS) to study their effect on its anticancer activity. It was intended to use solubility of NOS in an acidic environment and ability of the nanoparticles to passively target drugs into cancer tissue to modify the NOS pharmacokinetic properties and reduce the requirement for frequent injections. METHODS: Linear and star-shaped copolymers were synthetized and used to formulate NOS loaded nanoparticles. Cytotoxicity was performed using a sulforhodamine B method on MCF-7 cells, while biocompatibility was determined on rats followed by hematological and histopathological investigations. RESULTS: Formulae with the smallest particle sizes and adequate entrapment efficiency revealed that NOS loaded nanoparticles showed higher extent of release at pH 4.5. Colloidal stability suggested that nanoparticles would be stable in blood when injected into the systemic circulation. Loaded nanoparticles had IC50 values lower than free drug. Hematological and histopathological studies showed no difference between treated and control groups. Pharmacokinetic analysis revealed that formulation P1 had a prolonged half-life and better bioavailability compared to drug solution. CONCLUSIONS: Formulation of NOS into biodegradable polymeric nanoparticles has increased its efficacy and residence on cancer cells while passively avoiding normal body tissues. Graphical Abstract ᅟ.

Characterization of biosurfactants produced by Lactobacillus spp. and their activity against oral streptococci biofilm.

Lactic acid bacteria (LAB) can interfere with pathogens through different mechanisms; one is the production of biosurfactants, a group of surface-active molecules, which inhibit the growth of potential pathogens. In the present study, biosurfactants produced by Lactobacillus reuteri DSM 17938, Lactobacillus acidophilus DDS-1, Lactobacillus rhamnosus ATCC 53103, and Lactobacillus paracasei B21060 were dialyzed (1 and 6 kDa) and characterized in term of reduction of surface tension and emulsifying activity. Then, aliquots of the different dialyzed biosurfactants were added to Streptococcus mutans ATCC 25175 and Streptococcus oralis ATCC 9811 in the culture medium during the formation of biofilm on titanium surface and the efficacy was determined by agar plate count, biomass analyses, and flow cytometry. Dialyzed biosurfactants showed abilities to reduce surface tension and to emulsifying paraffin oil. Moreover, they significantly inhibited the adhesion and biofilm formation on titanium surface of S. mutans and S. oralis in a dose-dependent way, as demonstrated by the remarkable decrease of cfu/ml values and biomass production. The antimicrobial properties observed for dialyzed biosurfactants produced by the tested lactobacilli opens future prospects for their use against microorganisms responsible of oral diseases.

Oleanolic Acid Loaded PEGylated PLA and PLGA Nanoparticles with Enhanced Cytotoxic Activity against Cancer Cells.

Oleanolic acid (OA) is a natural triterpenoid with anticancer properties, but its hydrophobic nature and poor aqueous solubility pose challenges in pharmaceutical formulation development. The present study aimed at developing OA-loaded mPEG-PLGA or mPEG-PLA nanoparticles (NPs) to improve the delivery of OA. The NPs were prepared by nanoprecipitation, and their physicochemical properties were characterized. The OA encapsulation efficiency of the NPs was between 40 and 75%. The size of the OA-loaded NPs was around 200-250 nm, which fell within the range required for tumor targeting by means of the enhanced permeability and retention (EPR) effect, and the negatively charged NPs remained physically stable for over 20 weeks with no aggregation observed. The OA-loaded NPs produced significant cytotoxic effects through apoptosis in cancer cell lines. Overall, the OA-loaded mPEG-PLGA NPs and mPEG-PLA NPs shared similar physicochemical properties. The former, especially the OA-loaded mPEG-P(D,L)LGA NPs, were more cytotoxic to cancer cells and therefore were more efficient for OA delivery.

Could albumin affect the self-assembling properties of a block co-polymer system and drug release? An in-vitro study.

PURPOSE: This work investigated the influence of a model protein, bovine serum albumin (BSA), on the properties of a thermogelling formulation intended for administration inside body compartments where there is high albumin content, as in the case of inflamed joints; it also explored the relation between the variation of these properties and release performance of methotrexate (MTX), a drug used to treat forms of arthritis and rheumatic conditions. METHODS: The influence of BSA on the micellisation and gelation behaviour of Poloxamer 407, chosen as a model copolymer, was studied by differential scanning calorimetry (microDSC), dynamic light scattering (DLS), fluorescence spectroscopy and rheology studies. A release study of MTX loaded inside the hydrogel in presence and in absence of BSA was performed. RESULTS: DLS and microDSC data revealed that the micellisation process was not affected by the protein, as demonstrated by unaltered micellar size and thermodynamic parameters. While the presence of BSA in the copolymer system reduced gel consistency, the hydrogel release performance was only slightly affected. CONCLUSION: Our results suggested that the kinetics of MTX release mainly depended on the presence of the thermogelling copolymer, although other mechanisms related to BSA could be involved. Finally, the study assessed the feasibility of using a thermogelling hydrogel for in situ drug administration in areas with the presence of high protein concentrations.

Evaluation of citrus fibers as a tablet excipient.

The consumption of fibers is associated with many health benefits, such as a reduction of cardiovascular and gastrointestinal diseases, control of body weight, and prevention of diabetes. Despite the widespread use of fiber supplements such as capsules or tablets, there is an almost complete lack of information concerning the technological properties of functional fibers used in nutraceutical formulations. The aim of this work was to characterize the technological properties of citrus fibers necessary for their use as a processing aid in tableting. The results obtained showed that citrus fibers share many properties of other polysaccharides used as tableting excipients, such as thermal behavior and compaction mechanism, together with an appreciable tabletability. However, the most interesting properties resulted from their disintegration power. Citrus fibers behaved in a similar manner to the well-known super disintegrant croscarmellose sodium and resulted to be little susceptible to their concentration, to lubricant type, and lubricant concentration. Thus, this work supports the idea of a potential use of citrus fibers as "active" substances and processing aid in the tableting of nutraceutical products and also as functional excipient in pharmaceutical tablets formulation.

Efficient and highly reproducible production of red blood cell-derived extracellular vesicle mimetics for the loading and delivery of RNA molecules.

Extracellular vesicles (EVs) are promising natural nanocarriers for the delivery of therapeutic agents. As with any other kind of cell, red blood cells (RBCs) produce a limited number of EVs under physiological and pathological conditions. Thus, RBC-derived extracellular vesicles (RBCEVs) have been recently suggested as next-generation delivery systems for therapeutic purposes. In this paper, we show that thanks to their unique biological and physicochemical features, RBCs can be efficiently pre-loaded with several kinds of molecules and further used to generate RBCEVs. A physical vesiculation method, based on "soft extrusion", was developed, producing an extremely high yield of cargo-loaded RBCEV mimetics. The RBCEVs population has been deeply characterized according to the new guidelines MISEV2023, showing great homogeneity in terms of size, biological features, membrane architecture and cargo. In vitro preliminary results demonstrated that RBCEVs are abundantly internalized by cells and exert peculiar biological effects. Indeed, efficient loading and delivery of miR-210 by RBCEVs to HUVEC has been proven, as well as the inhibition of a known mRNA target. Of note, the bench-scale process can be scaled-up and translated into clinics. In conclusion, this investigation could open the way to a new biomimetic platform for RNA-based therapies and/or other therapeutic cargoes useful in several diseases.

The dark side of the wool? From wool wastes to keratin microfilaments through the solution blow spinning process.

The valorization of discarded wool from dairy sheep breeding is a challenging issue. The most proposed strategies lie in the processing of keratin extracted from wool without reducing the molecular weight of the protein chains (the high molecular weight-HMW keratin). Here, the HMW keratin has been spun for the first time by solution blow spinning. A screening study of the process carried out with a 2-level full factorial design revealed that keratin filaments can be obtained by using the polyethylene oxide at 900 kDa, a 2 bar air pressure, and a 30 cm needle-collector distance. An annealing at 80 °C for 15 min, at pH 3.5 with citric acid contributes to increasing the viscosity of the keratin solutions thereby allowing the production of defect-free and water-stable filaments having diameters from 1 to 6 µm. A negligible toxic effect was observed after 24 and 48 h on HT29 epithelial cells and normal blood cells displayed behavior similar to the control demonstrating that the patches are hemocompatible. Therefore, the developed SBS process of keratin aqueous solutions could represent a valuable platform for developing patches that need to be blood-contacting and deposited in-situ.

Microfluidic development and biological evaluation of targeted therapy-loaded biomimetic nano system to improve the metastatic melanoma treatment.

Optimizing current therapies is among next steps in metastatic melanoma (MM) treatment landscape. The innovation of this study is the design of production process by microfluidics of cell membrane (CM)-modified nanoparticles (NPs), as an emerging biomimetic platform that allows for reduced immune clearance, long blood circulation time and improved specific tumor targeting. To achieve melanoma selectivity, direct membrane fusion between synthetic liposomes and CMs extracted from MM cell line was performed by microfluidic sonication approach, then the hybrid liposomes were loaded with cobimetinib (Cob) or lenvatinib (Lenva) targeting agents and challenged against MM cell lines and liver cancer cell line to evaluate homotypic targeting and antitumor efficacy. Characterization studies demonstrated the effective fusion of CM with liposome and the high encapsulation efficiency of both drugs, showing the proficiency of microfluidic-based production. By studying the targeting of melanoma cells by hybrid liposomes versus liposomes, we found that both NPs entered cells through endocytosis, whereas the former showed higher selectivity for MM cells from which CM was extracted, with 8-fold higher cellular uptake than liposomes. Hybrid liposome formulation of Cob and Lenva reduced melanoma cells viability to a greater extent than liposomes and free drug and, notably, showed negligible toxicity as demonstrated by bona fide haemolysis test. The CM-modified NPs presented here have the potential to broaden the choice of therapeutic options in MM treatment.

Biomimetic Platelet-Cloaked Nanoparticles for the Delivery of Anti-Inflammatory Curcumin in the Treatment of Atherosclerosis.

Atherosclerosis still represents a major driver of cardiovascular diseases worldwide. Together with accumulation of lipids in the plaque, inflammation is recognized as one of the key players in the formation and development of atherosclerotic plaque. Systemic anti-inflammatory treatments are successful in reducing the disease burden, but are correlated with severe side effects, underlining the need for targeted formulations. In this work, curcumin is chosen as the anti-inflammatory payload model and further loaded in lignin-based nanoparticles (NPs). The NPs are then coated with a tannic acid (TA)- Fe (III) complex and further cloaked with fragments derived from platelet cell membrane, yielding NPs with homogenous size. The two coatings increase the interaction between the NPs and cells, both endothelial and macrophages, in steady state or inflamed status. Furthermore, NPs are cytocompatible toward endothelial, smooth muscle and immune cells, while not inducing immune activation. The anti-inflammatory efficacy is demonstrated in endothelial cells by real-time quantitative polymerase chain reaction and ELISA assay where curcumin-loaded NPs decrease the expression of Nf-κb, TGF-ß1, IL-6, and IL-1ß in lipopolysaccharide-inflamed cells. Overall, due to the increase in the cell-NP interactions and the anti-inflammatory efficacy, these NPs represent potential candidates for the targeted anti-inflammatory treatment of atherosclerosis.

Leveraging 3D-printed microfluidic micromixers for the continuous manufacture of melatonin loaded SNEDDS with enhanced antioxidant activity and skin permeability.

Vesicants are chemical warfare agents (CWAs) capable of causing severe skin damage and systemic toxicity. Melatonin, known for its anti-inflammatory and antioxidant properties, can mitigate the effects of these agents. Self-nano-emulsifying drug delivery systems (SNEDDS) containing a high melatonin concentration (5 %, 50 mg/g) were optimized using a quality-by-design approach from biocompatible, non-irritant excipients with a particle size of about 100 nm. The melatonin-loaded SNEDDS showed a 43-fold greater permeability than a conventional melatonin cream. Chemical stability at ambient temperature (25 °C) was maintained for one year. The preparation of optimised melatonin-loaded SNEDDS using a simple mixing method was compared to microfluidic micromixers. Mixing was successfully achieved using a 3D-printed (fused deposition modeling or stereolithography) T-shaped toroidal microfluidic chip (with a channel geometry optimized by computational fluid dynamics), resulting in a scalable, continuous process for the first time with a substantial reduction in preparation time compared to other conventional mixing approaches. No statistically significant differences were observed in the key quality attributes, such as particle size and melatonin loading, between the conventional mixing method in a water bath to reach equilibrium solubility and the use of 3D-printed micromixers. This scalable, continuous, cost-effective approach improves the overall efficiency of SNEDDS production, reduces the cost of quality control for multiple batches, and demonstrates the potential of microfluidic manufacturing with readily customizable 3D-printed micromixers at points of care such as military bases.

3D-printed EVA-based patches manufactured by direct powder extrusion for personalized transdermal therapies.

In recent years, 3D printing has attracted great interest in the pharmaceutical field as a promising tool for the on-demand manufacturing of patient-centered pharmaceutical forms. Among the existing 3D printing techniques, direct powder extrusion (DPE) resulted as the most practical approach thanks to the possibility to directly process excipients and drugs in a single step. The main goal of this work was to determine whether different grades of ethylene vinyl acetate (EVA) copolymer might be employed as new feedstock materials for the DPE technique to manufacture transdermal patches. By selecting two model drugs with different thermal behavior, (i.e., ibuprofen and diclofenac sodium) we also wanted to pay attention to the versatility of EVA excipient in preparing patches for customized transdermal therapies. EVA was combined with 30 % (w/w) of each model drugs. The physicochemical composition of the printed devices was investigated through Fourier-transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analyses. FT-IR spectra confirmed that the starting materials were effectively incorporated into the final formulation, and thermal analyses demonstrated that the extrusion process altered the crystalline morphology of the raw polymers inducing the formation of crystals at lower thicknesses. Lastly, the drug release and permeation profile of the printed systems was evaluated for 48 h and showed to be dependent on the VA content of the EVA grade (74.5 % of ibuprofen released from EVA 4030AC matrix and 12.6 % of diclofenac sodium released from EVA1821A matrix). Hence, this study demonstrated that EVA and direct powder extrusion technique could be promising tools for manufacturing transdermal patches. By selecting the EVA grade with the appropriate VA content, drugs with dissimilar melting points could be printed preserving their thermal stability. Moreover, the desired drug release and permeation profile of the drug can be achieved, representing an important advantage in terms of personalized medicine.

Efficacy of UV and UV-LEDs Irradiation Models for Microbial Inactivation Applicable to Automated Sterile Drug Compounding.

LEDs development has attracted attention over conventional mercury lamps for the tiny size, high efficiency, long lifetime, low operating temperature. The antimicrobial effectiveness of traditional UV-lamps radiation (wavelength of 254 nm) compared to UV-C LEDs (LED1 wavelength range 275-286 nm and LED2 range 260-270 nm) was carried out, for possible applications to automated sterile drug compounding. The UV lamp and the tested UV-LED devices remarkably reduced microbial load, following a time-dose response, but the best performance was evidenced by LED1, which guaranteed the complete inactivation of high concentrations of bacteria, yeasts, and spores at doses between 200 and 2000 J/m2.

4D printed multipurpose smart implants for breast cancer management.

Breast-conserving surgery (BCS) is the primary strategy for treating early-stage breast cancer; however, the incidence of local recurrence and breast tissue loss negatively impacts patients and survivors. Furthermore, radiotherapy and/or systemic therapies are frequently advised to avoid recidivism and increase the patient's chance of survival, resulting in longer duration of treatments, and unpleasant systemic side effects. Given the poor prognosis and the heterogeneity between individuals and tumors, a patient-centered approach is fundamental. Herein we developed a multipurpose 4D printed implant made of a blend of carboxymethyl cellulose sodium salt (CMC) and cellulose nanocrystals (CNC), loaded with doxorubicin (DOX). To predict printability performance, full rheological characterization was carried out. The smart device was programmed to change size, under swelling, to better fit in the tissue cavity, resulting in a great potential for personalization, thus improving the aesthetic outcomes. The influence of the formulation and printing parameters on the morpho transformation was investigated through the swelling test, confirming the possibility to program the 4D shape. The manufactured implants were characterized by a variety of methods, including in vitro release studies. Lastly, the anticancer activity was conducted in vitro, on MDA-MB-231 cells. Implants promoted an anticancer effect of -58% viability after 72 h incubation, even when tested 4 weeks after the printing process. Overall, the morpho transformation and the in vitro studies have shown that the implant could represent a potential strategy for breast cancer following resection, to fill the void in the breast resulting from the surgery and provide an anticancer effect to avoid recurrence.

Gamma oryzanol loaded into micelle-core/chitosan-shell: from translational nephroprotective potential to emphasis on sirtuin-1 associated machineries.

Gamma oryzanol (ORZ) is a nutraceutical that is poorly water soluble with poor intestinal absorption. In the current work, ORZ was nanoformulated into uncoated and chitosan coated micelles based on methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-PCL) and poly(ε-caprolactone)-b-methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (PCL-PEG-PCL) copolymers for augmenting ORZ oral delivery. The physicochemical properties, morphological study, in-vitro release and safety of the nanoplaforms were determined. Importantly, the nephroprotective competence of the nanoplaforms was analyzed against acute kidney injury (AKI) rat model and the sirtuin-1 associated machineries were assessed. The results revealed that the micelles exerted particle size (PS) from 97.9 to 117.8 nm that was markedly increased after chitosan coating. The reversal of zeta potential from negative to highly positive further confirmed efficient coating. In vitro release profiles demonstrated prolonged release pattern. The nanoforms conferred higher cell viability values than free ORZ on Vero cell line. The designed micelles displayed augmented nephroprotection compared to free ORZ with the supremacy of CS coated micelles over uncoated ones in restoring kidney parameters to normal levels. The attenuated AKI was fulfilled via the modulation of sirtuin-1 signaling pathways translated by restoring the histological features, increasing renal antioxidant states, renal autophagy and decreasing renal inflammation and renal apoptosis. These outcomes confirmed that surface modification with chitosan had a considerable leverage on micelles safety, release behavior and in vivo performance.

Hydrogel containing mPEG-PLGA nanoparticles for the vaginal delivery of saquinavir mesylate against HIV infection.

Saquinavir mesylate (SQV) is a protease inhibitor commonly employed for the treatment of human immunodeficiency virus-1 infection. It is generally administered orally as tablets in combination with other antiviral drugs. Another promising route of administration can be represented by the vaginal one through topically applied formulations. This delivery can reduce the first-pass effect in the case of systemic drug adsorption or prevent HIV infection. We propose the formulation of a Carbopol® 974 (C974) hydrogel containing biodegradable mPEG-PL(L)GA nanoparticles (NPs) for the vaginal delivery of SQV, intended both as a prevention and a therapeutic strategy. mPEG-PL(L)GA NPs were incorporated into the C974 polymeric matrix, leading to a reduction of the hydrogel consistency dependent on NPs and C974 concentrations. Despite the moderate drug loading into NPs, the presence of the NPs had an impact on the in vitro release of the drug from the hydrogel at pH 5.5 using immersion cells. A higher amount of the drug was released, probably due to the effect of NPs in promoting the incorporation of the drug into the hydrogel at a high SQV dose. These findings can be useful for the development of topically applied hydrogels for SQV delivery, possibly having improved in vivo therapeutic outcomes.

Combining microfluidics and coaxial 3D-bioprinting for the manufacturing of diabetic wound healing dressings.

Diabetic foot ulcers (DFUs) are a crucial complication of diabetes, as in a diabetic wound, each step of the physiological healing process is affected. This entails a more easily infectable wound, and delayed tissue regeneration due to the inflammation that occurs, leading to a drastic decrease in the overall patient's quality of life. As a strategy to manage DFUs, skin alternatives and wound dressings are currently receiving a lot of attention as they keep the wound environment "under control", while providing bioactive compounds that help to manage infection and inflammation and promote tissue repair. This has been made possible thanks to the advent of emerging technologies such as 3D Bioprinting to produce skin resembling constructs or microfluidics (MFs) that allows the manufacture of nanoparticles (NPs) that act as drug carriers, in a prompt and less expensive way. In the present proof-of-concept study, the possibility of combining two novel and appealing techniques in the manufacturing of wound dressings has been demonstrated for first time. The novelty of this work consists in the combination of liposomes (LPs) encapsulating the active pharmaceutical ingredient (API) into a hydrogel that is further printed into a three-dimensional scaffold for wound dressing; to the knowledge of the authors this has never been done before. A grid-shaped scaffold has been produced through the coaxial 3D bioprinting technique which has allowed to combine, in one single filament, two different bioinks. The inner core of the filament is a nanocomposite hydrogel consisting of hydroxyethyl cellulose (HEC) and PEGylated LPs encapsulated with thyme oil (TO) manufactured via MFs for the first time. The outer shell of the filament, instead, is represented by a hybrid hydrogel composed of sodium alginate/cellulose nanocrystals (SA/CNC) and enriched with free TO. This provides a combination of two different release ratios of the API, a bulk release for the first 24 h thanks to the free TO in the shell of the filament and a sustained release for up to 10 days provided from the API inside the LPs. Confocal Microscopy verified the actual presence of the LPs inside the scaffold after printing and evaluation using the zone of inhibition test proved the antibacterial activity of the manufactured scaffolds against both Gram-positive and Gram-negative bacteria.