RESUMO
The global problem of groundwater being contaminated with per- and polyfluoroalkyl substances (PFASs) originating from highly contaminated soils has created a need to remediate these locations. In situ immobilisation of PFASs in soil by applying sorbents is often a preferred low-cost technique to reduce their mobility and leaching to groundwater, but the long-term efficacy of sorbents has not yet been investigated. In this study, the longevity of remediation of two different soils by two common sorbents (RemBind®, and pulverized activated carbon, Filtrasorb™ 400) was assessed. Regulatory agencies often rely on standardised leaching procedures to assess the risk of contaminant mobility in soils. Hence, the Australian Standard Leaching Procedure and the U.S. EPA Leaching Environmental Assessment Framework were applied to quantify the desorption/leaching of a wide range of PFASs from unremediated and remediated soils under a range of pH conditions (pH 2 to 12). Ease of desorption and subsequent leaching from the unremediated soils was related to C-chain length; while short-chain PFASs were easily desorbed and leached, long-chain PFASs were more difficult to desorb. Desorption of long-chain PFASs was also pH dependent in unremediated soils, with desorption being greater at high pH. Both sorbents retained PFASs strongly in the remediated soils (> 99% for most PFASs) across a broad range of pH conditions, with only small differences between the sorbents in terms of efficacy. Both sorbents showed better retention of PFASs under low pH conditions. Remediation of PFAS-contaminated soils with these sorbents could be considered robust and durable in terms of changes in soil pH, with little risk of subsequent PFASs desorption under normal environmental pH conditions. Ultimately, to give regulators and site owners the greatest level of confidence that immobilisation is stable for the longer term, it should also be tested under repeated cycles of leaching and under different conditions.