RESUMO
The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.
RESUMO
Limited by the strong oxidation environment and sluggish reconstruction process in oxygen evolution reaction (OER), designing rapid self-reconstruction with high activity and stability electrocatalysts is crucial to promoting anion exchange membrane (AEM) water electrolyzer. Herein, trace Fe/S-modified Ni oxyhydroxide (Fe/S-NiOOH/NF) nanowires are constructed via a simple in situ electrochemical oxidation strategy based on precipitation-dissolution equilibrium. In situ characterization techniques reveal that the successful introduction of Fe and S leads to lattice disorder and boosts favorable hydroxyl capture, accelerating the formation of highly active γ-NiOOH. The Density Functional Theory (DFT) calculations have also verified that the incorporation of Fe and S optimizes the electrons redistribution and the d-band center, decreasing the energy barrier of the rate-determining step (*Oâ*OOH). Benefited from the unique electronic structure and intermediate adsorption, the Fe/S-NiOOH/NF catalyst only requires the overpotential of 345 mV to reach the industrial current density of 1000 mA cm-2 for 120 h. Meanwhile, assembled AEM water electrolyzer (Fe/S-NiOOH//Pt/C-60 °C) can deliver 1000 mA cm-2 at a cell voltage of 2.24 V, operating at the average energy efficiency of 71% for 100 h. In summary, this work presents a rapid self-reconstruction strategy for high-performance AEM electrocatalysts for future hydrogen economy.
RESUMO
The electronic regulation and surface reconstruction of earth-abundant electrocatalysts are essential to efficient oxygen evolution reaction (OER). Here, an inverse-spinel Co,S atomic pair codoped Fe3 O4 grown on iron foam (Co,S-Fe3 O4 /IF) is fabricated as a cost-effective electrocatalyst for OER. This strategy of Co and S atomic pair directional codoping features accelerates surface reconstruction and dynamically stabilizes electronic regulation. CoS atomic pairs doped in the Fe3 O4 crystal favor controllable surface reconstruction via sulfur leaching, forming oxygen vacancies and Co doping on the surface of reconstructed FeOOH (Co-FeOOH-Ov /IF). Before and after surface reconstruction via in situ electrochemical process, the Fe sites with octahedral field dynamically maintains an appropriate electronic structure for OER intermediates, thus exhibiting consistently excellent OER performance. The electrochemically tuned Fe-based electrodes exhibit a low overpotential of 349 mV at a current density of 1000 mA cm-2 , a slight Tafel slope of 43.3 mV dec-1 , and exceptional long-term electrolysis stability of 200 h in an alkaline medium. Density functional theory calculations illustrate the electronic regulation of Fe sites, changes in Gibbs free energies, and the breaking of the restrictive scaling relation between OER intermediates. This work provides a promising directional codoping strategy for developing precatalysts for large-scale water-splitting systems.
RESUMO
Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T-MoS2 catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T-MoS2 . Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T-MoS2 layers through cobalt sites to expand interlayer spacing of MoS2 (Co-1T-MoS2 -bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T-MoS2 originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co-1T-MoS2 -bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118â mV at 10â mA cm-2 ). In addition, integrated into an anion-exchange membrane water electrolyzer, Co-1T-MoS2 -bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.
RESUMO
Molybdenum carbide materials with unique electronic structures have received special attention as water-splitting catalysts, but their structural stability in the alkaline water electrolysis process is not satisfactory. This study reports an in situ pyrolysis method for preparing NiMo-based metal-organic framework (MOF)-derived chain-mail oxygen evolution reaction (OER) electrocatalysts and bamboo-like N-doped carbon nanotube (NCNT)-encapsulated Ni-doped MoC nanoparticles (NiMoC-NCNTs). The NCNTs can provide chain mail shells to protect the inner highly reactive Ni-doped MoC cores from electrochemical corrosion by the alkaline electrolyte and regulate their catalytic properties through charge redistribution. Benefiting from high N-doping with abundant pyridinic moieties and abundant active sites of the periodic bamboo-like nodes, the as-prepared NiMoC-NCNTs display an outstanding activity for the OER with an overpotential of 310 mV at 10 mA cm-2 and a superior long-term stability of 50 h. Density functional theory calculations reveal that the excellent electrocatalytic activity of NiMoC-NCNTs comes from the electron transfer from NiMoC nanoparticles to NCNTs, resulting in a decrease in the local work function at the carbon surface and optimized free efficiencies of OER intermediates on C sites. This work provides an effective approach to improve the structural stability of fragile catalysts by equipping them with carbon-based chain.
RESUMO
Photoelectrocatalyzed hydrogen production plays an important role in the path to carbon neutrality. The construction of heterojunctions provides an ideal example of an oxygen precipitation reaction. In this work, the performance of the n-n type heterojunction CeBTC@FeBTC/NIF in the photoelectronically coupled catalytic oxygen evolution reaction (OER) reaction is presented. The efficient transfer of carriers between components enhances the catalytic activity. Besides, the construction of heterojunctions optimizes the energy level structure and increases the absorption of light, and the microstructure forms holes with a blackbody effect that also enhances light absorption. Consequently, CeBTC@FeBTC/NIF has excellent photoelectric coupling catalytic properties and requires an overpotential of only 300 mV to drive a current density of 100 mA cm-2 under illumination. More importantly, the n-n heterojunction was found to be effective in enhancing charge and photogenerated electron migration by examining the carrier density of each component and carrier diffusion at the interface.
RESUMO
The rational design and optimization of heterogeneous interface for low loading noble metal HER eletrocatalysts to facilitate the upscaling of alkaline water/seawater electrolysis is highly challenging. Herein, we present a facile deep corrosion strategy induced by NaBH4 to precisely construct an ultrasmall Ru nanoparticle-decorated Ni/NiO hybrid (r-Ru-Ni/NiO) with highly dispersed triple-phase heterostructures. Remarkably, it exhibits superior activity with only 53 mV and 70 mV at 100 mA cm-2 for hydrogen evolution reaction (HER) in alkaline water and seawater, respectively, surpassing the performance of Pt/C (109.7 mV, 100 mA cm-2, 1 M KOH). It is attributed to collaborative optimization of electroactive interfaces between well-distributed ultrasmall Ru nanoparticles and Ni/NiO hybrid. Moreover, the assembled r-Ru-Ni/NiO system just require 2.03 V at 1000 mA cm-2 in anion exchange membrane (AEM) electrolyzer, outperforming a RuO2/NF || Pt/C system, while exhibiting outstanding stability at high current densities. This study offers a logical design for accurate construction of interfacial engineering, showing promise for large-scale hydrogen production via electrochemical water splitting.
RESUMO
The incorporation of high-valence transition metal atoms into FeNi (oxy)hydroxides may be a promising strategy to regulate the intrinsic electronic states, thereby reducing the thermodynamic barrier and accelerating oxygen evolution reaction (OER). Here, a high-valence Mo atoms doping route is proposed by an efficient self-reconstruction strategy to prepare MoFeNi (oxy)hydroxides for efficient alkaline OER. By using borides (MoNiB) as sacrificial template and Mo source, FeNi (oxy)hydroxides nanoflakes embedded with high-valence Mo atoms (MoFeNi) is successfully synthesized, which can modulate the electron coordination to improve the intrinsic catalytic activity. Remarkably, the obtained MoFeNi exhibits extremely low overpotential (η100 = 252 mV and η500 = 288 mV) and small Tafel slope (18.35 mV dec-1). The robust catalyst can run stably for hours at 500 mA cm-2. Characterization results and theoretical calculations confirmed that the addition of high-valence Mo effectively modulated the intrinsic electronic structure of metal sites and optimized the adsorption/desorption energy of the intermediates, accelerating OER reactions kinetics. By coupling MoFeNi anode with Pt/C cathode, anion exchange membrane (AEM) electrolyser can operate stably at 500 mA cm-2 with about less than 2.2 V. This research introduces a novel approach to develop ideal electrocatalysts through the incorporation of high-valence molybdenum species.
RESUMO
Glycerol (electrochemical) oxidation reaction (GOR) producing organic small molecule acid and coupling with hydrogen evolution reaction is a critical aspect of ensuring balanced glycerol capacity and promoting hydrogen generation on a large scale. However, the development of highly efficient and selective non-noble metal-based GOR electrocatalysts is still a key problem. Here, an S-doped CuO nanorod array catalyst (S-CuO/CF) constructed by sulfur leaching and oxidative remodeling is used to drive GOR at low potentials: It requires potentials of only 1.23 and 1.33 V versus RHE to provide currents of 100 and 500 mA cm-2, respectively. Moreover, it shows satisfactory comprehensive performance (at 100 mA cm-2, Vcell = 1.37 V) when assembled as the anode in asymmetric coupled electrolytic cell. Furthermore, we propose a detailed cycle reaction pathway (in alkaline environment) of S-doped CuO surface promoting GOR to produce formic acid and glycolic acid. Among them, the C-C bond breaking and lattice oxygen deintercalation steps frequently involved in the reaction pathway are the key factors to determine the catalytic performance and product selectivity. This research provides valuable guidance for the development of transition metal-based electrocatalysts for GOR and valuable insights into the glycerol oxidation cycle reaction pathway.
RESUMO
The poor conductivities and instabilities of accessible nickel oxyhydroxides hinder their use as oxygen evolution reaction (OER) electrocatalysts. Herein, we constructed Fe-NiOOH-OV-600, an Fe-doped nickel oxide hydroxide with abundant oxygen vacancies supported on nickel foam (NF), using a hydrothermal method and an electrochemical activation strategy involving 600 cycles of cyclic voltammetry, assisted by the precipitation/dissolution equilibrium of ferrous sulfide (FeS) in the electrolyte. This two-step method endows the catalyst with abundant Fe-containing active sites while maintaining the ordered structure of nickel oxide hydroxide (NiOOH). Characterization and density functional theory (DFT) calculations revealed that synergy between trace amounts of the Fe dopant and the oxygen vacancies not only promotes the generation of reconstructed active layers but also optimizes the electronic structure and adsorption capacity of the active sites. Consequently, the as-prepared Fe-NiOOH-OV-600 delivered large current densities of 100 and 1000â¯mAâ¯cm-2 for the OER at overpotentials of only 253 and 333â¯mV in 1â¯mol/L KOH. Moreover, the catalyst is stable for at least 100â¯h at 500â¯mAâ¯cm-2. This work provides insight into the design of efficient transition-metal-based electrocatalysts for the OER.
RESUMO
Metal organic framework (MOF) is currently-one of the key catalysts for oxygen evolution reaction (OER), but its catalytic performance is severely limited by electronic configuration. In this study, cobalt oxide (CoO) on nickel foam (NF) was first prepared, which then wrapped it with FeBTC synthesized by ligating isophthalic acid (BTC) with iron ions by electrodeposition to obtain CoO@FeBTC/NF p-n heterojunction structure. The catalyst requires only 255 mV overpotential to reach a current density of 100 mA cm-2, and can maintain 100 h long time stability at 500 mA cm-2 high current density. The catalytic properties are mainly related to the strong induced modulation of electrons in FeBTC by holes in the p-type CoO, which results in stronger bonding and faster electron transfer between FeBTC and hydroxide. At the same time, the uncoordinated BTC at the solid-liquid interface ionizes acidic radicals which form hydrogen bonds with the hydroxyl radicals in solution, capturing them onto the catalyst surface for the catalytic reaction. In addition, CoO@FeBTC/NF also has strong application prospects in alkaline electrolyzers, which only needs 1.78 V to reach a current density of 1 A cm-2, and it can maintain long-term stability for 12 h at this current. This study provides a new convenient and efficient approach for the control design of the electronic structure of MOF, leading to a more efficient electrocatalytic process.
RESUMO
Titanium silica (TS-1) membrane catalysts grown on the surfaces of spherical substrates can both exploit the high catalytic performance and facilitate their separation from products after the reaction. In this work, a simple static crystallization method was used to perform the in situ construction of a TS-1 membrane on the surfaces of micron-sized spherical carriers. The shortcomings of the TS-1 membrane under static crystallization conditions were overcome by in situ dynamic crystallization, and the effect of rotation speed on the formation of the molecular sieve membrane was investigated. The results showed that the molecular sieve membrane was smooth and homogeneous, with a higher synthesis efficiency at a slow rotational speed. The micron TS-1 spherical membrane catalytic chloropropene epoxidation reaction was investigated in a fixed bed, and the conversion of hydrogen peroxide and selectivity of epichlorohydrin reached 99.4 and 96.8%, respectively. After being reused twice, the catalyst still maintained a stable catalytic performance.
RESUMO
The incorporation of borate is a beneficial strategy to improve the catalytic activity of transition metal-based electrocatalyts for oxygen evolution reaction (OER). However, how to efficiently introduce borate has always been a challenge. Here, a facile and scalable molten salt method is developed to successfully dope borate into FeNi layered double hydroxides (FeBi@FeNi LDH) for efficient OER. The molten salt method can not only promote the formation of evenly dispersed nano-pompous FeBi precursor, thus providing the possibility to realize the direct doping of borate and the increase of mass, charge transfer and oxygen evolution active sites in FeNi LDH, but also promote the in-situ growth of FeBi@FeNi LDH on the conductive iron foam, improvingconductivity and stability of the material. The results indicate that the synthesized FeBi@FeNi LDH shows enhanced OER activity by delivering current densities of 10 and 100 mA cm-2 at low overpotentials of 246 and 295 mV and showing a small Tafel slope of 56.48 mV dec-1, benefiting from the optimization of geometric structure of active sites as well as the adjustment of electron density by borate doping especially in the case of molten salt. In addition, the sample can maintain durability at an industrial current density of 100 mA cm-1 for 90 h. This work provides a new way for the construction of efficient catalysts using boron doping assisted by molten salt.
RESUMO
High-valence metal doping and abundant grain boundaries (GBs) have been proved to be effective strategies to promote the oxygen evolution reaction (OER). However, the reasonable design of the two to facilitate OER collaboratively is challenging. Herein, a convenient and novel one-step molten salt decomposition strategy is proposed to fabricate segregated-Mo doped nickle nitrate hydroxide with substantial GBs on MoNi foam (Mo-NNOH@MNF). When processed in molten salt, the Mo species on the conductive substrate migrates unevenly to the surface of Mo-NNOH@MNF, which not only induces the formation of abundant GBs to modulate electronic structure, but also improves the intrinsic activity as high-valence dopants, synergistically elevating OER activity. As verification, the optimized Mo-NNOH@MNF-10h exhibits low overpotential of 150 mV at 10 mA cm-2, which can be attributed to the reduced valence charge transition energy of Ni by high-valence Mo dopant, coupled with the fine-tuning of d-band center bond and corresponding local electron density by induced GBs and Mo doping, as DFT calculations revealed. Moreover, the intrinsic robustness and strong adhesion ensure the long-term stability of 6 h at 500 mA cm-2. This work provides a promising molten salt decomposition approach to synthesize advanced materials with unique structures.
RESUMO
Tracking microstructure transformation under industrial conditions is significant and urgent for the development of oxygen evolution reaction (OER) catalysts. Herein, employing iron foam (IF) as an object, we closely monitor related morphologies and composition evolution under 300 mA cm-2 at 40 °C (IF-40-t)/80 °C (IF-80-t) in 6 M KOH and find that the OER activity first increases and then decreases with the continuous generation of FeOOH. Moreover, the reasons for different tendencies of Tafel slope, double-layer capacitance, and impedance for IF-40-t/IF-80-t have been investigated thoroughly. In detail, the OER activity of IF-40-t is governed by electron and mass transport, while for IF-80-t, the dominating factor is electron transfer. Further, to improve the stability, guided by the above results, two versatile methods that do not sacrifice electron and mass transport have been proposed: surface coating and dynamic interface construction. The synchronous improvements of stability and activity are deeply revealed, which may provide inspiration for catalyst design for industrial applications.
RESUMO
Reasonable design of hydrogen evolution reaction (HER) electrocatalyst from the perspective of electronic structure is a vital way to optimize the catalytic activity. Mono-metallic iron-based phosphates have been shown to be active toward HER, but their performance remains unsatisfactory despite their abundant reserves and low preparation cost. Here, guided by the d-band center and band structure theories, V-doped FeP nanoflower grown directly on iron foam are constructed. Combining the density functional theory (DFT) simulations with physical characterizations reveal that the enhanced HER activity is mainly attributed to the lowed d-band central position, increased water dissociation capacity, decreased hydrogen formation energy barrier and reduced charge transfer impedance. As a HER catalyst in 1 M KOH, the obtained V-FeP shows low overpotentials of â¼149, â¼246 and â¼290 mV to deliver the current densities of 100, 500 and 1000 mA cm-2 with at least 24 h. When coupled with other highly active oxygen evolution reaction (OER) catalyst (NiFe-LDH/IF), the NiFe-LDH/IF(+) || V-FeP/IF(-) pair also performs a low cell voltage and over 100-h stability at high current density of 1000 mA cm-2, which endows it a large potential in the practical electrolytic water industry. Our work may provide a reference for the enhancement of inert and low-cost HER-active iron phosphide.
RESUMO
CoP is one of the most promising catalysts for catalyzing hydrogen evolution reaction. The foremost issue is how to improve intrinsic activity by regulating electronic structure at the molecular level. Herein, utilizing selective combination of EDTA and Co2+, an amorphous-crystalline CoP with lower valence cobalt and hollow porous structure which induced by dual ligand environment is successfully synthesized via microwave heating and following phosphating process. Synthesize CoPBA from EDTA3+ and Co3+ in a ratio of 1:1 and followed by phosphating (ECP-1) exhibits excellent performance for HER in alkaline media, requiring 173 mV to achieve 10 mA cm-2. The enhanced catalytic activity may be ascribed to the amorphous-crystalline crystal structure with enlarged exposure of active sites and the hollow porous framework induced by EDTA, as well as the homogeneously distribution of (111) plane, on which the change of free energy on both Co bridge sites and P top sites is close to zero when adsorbing hydrogen. Besides, its great catalytic stability has been evaluated via 1000 cycles of CV measurement. The possible mechanism of valence state regulation of cobalt ions in CoP is discussed in detail. Furthermore, the optimal ratio of EDTA to Co2+ and different precursor states are explored reasonably.
RESUMO
Promoting the reconstruction of electrocatalysts during the oxygen evolution reaction (OER) is generally regarded as a promising strategy for enhanced activity. F anions with strong electronegativity are predicted to enhance this transformation. Herein, a fluorine-anion doping route is proposed to convert the well-latticed NiMoO4@MNF to amorphous F-NiMoO4@MNF by a facile and versatile molten salt strategy. The well-defined nanorod arrays guarantee abundant exposed active sites, rapid mass transfer, and fast gas bubble release. Moreover, the emerged loose amorphous structure is conducive to the dynamic migration of F species and effective penetration of the electrolyte; therefore, the resulting exchange between F and hydroxide anions induces the formation of an active oxy(hydroxide) layer, thus finally optimizing the electronic structure and absorption/desorption energy on the surface of F-NiMoO4@MNF. The boosted OER performance of reconstructed F-NiMoO4@MNF is reliably confirmed by a low overpotential of 188 mV at 50 mA cm-2, a small Tafel slope of 33.8 mV dec-1, and favorable long-term stability. In addition, accelerated hydrogen evolution is observed, which is ascribed to the finely tuned electron distribution. This work would provide a new reconstruction route assisted by F-anion doping to the development of high-performance catalysts.
RESUMO
Heteroatom doping is a promising strategy to optimize the electronic structure of transition metal phosphides so enhancing the hydrogen evolution reaction (HER). However, complex and harsh experimental design is often required to achieve homogeneous doping of corresponding elements while achieving the best regulating effect. Herein, a facile ion-exchange (IE) strategy is applied to dope Mo/V species evenly into Ni-Co phosphides under mild conditions while maintaining the nanoneedle morphology. The electrochemical characterization verifies Mo dopants have a better electronic regulation effect on NiCoP crystal than V dopants, corresponding to the better hydrogen evolution performance of Mo-NiCoP/NF. Notably, due to the highly dispersed nanoneedle morphology, the synergistic effect of Ni-Co phosphides, and the optimized electronic structure, Mo-NiCoP/NF demonstrates a higher activity than that of the noble metal Pt/C at the high current density (>99 mA cm-2). The present work is supposed to open new sights for the development of high-performance catalysts by ion-exchange strategy.
RESUMO
The oriented distribution and strong bonding of Fe active sites in multiple metal hydroxides are crucial to modulate activity and stability for efficient oxygen evolution reaction (OER). However, the dispersion and inevitable dissolution of Fe species still need to be addressed through deliberate design. Here, trace amounts of Fe chelated with tannic acid (TA) are precisely anchored to ultrathin Co hydroxides (TF@Co(OH)2-t) through a new anodic interfacial coordination assembly strategy: firstly, the ZIF-67@Co(OH)2 precursor with ultrathin Co(OH)2 nanosheets vertically grown on the shell, provides abundant active sites and sufficient anchoring regions for subsequent TA-Fe coating; secondly, the TA-Fe ligand network quickly and robustly coats the surface of the Co(OH)2via positive potential-driven chronopotentiometry, yielding TF@Co(OH)2-t with good dispersion and controllable Fe species. The TA-Fe network efficiently activates Co species and prevents the dissolution of Fe ions. Physical characterization and DFT simulations reveal that the optimized OER activity with 317 mV at 10 mA cm-2 for TF@Co(OH)2-500 can be attributed to the accelerated electron transfer, increased active sites, and the moderate fall in d-band center levels due to Fe integration. Moreover, prolonged stability is realized benefiting from the robust TA-Fe coating protecting the actives sites.