RESUMO
We report the use of biochar and Fe3O4 nanoparticles as co-stabilizers for oil-in-water (o/w) Pickering emulsion. The emulsion is subsequently used to prepare magnetic tetracycline-imprinted biochar composite microspheres (MMIPMs) with good uniformity and high selectivity. The MMIPMs were characterized by scanning electron microscopy (SEM), Brunner-Emmet-Teller (BET) measurements, Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and thermogravimetry analysis (TGA). The adsorption properties of tetracycline to the MMIPMs were investigated using different adsorption experiments including adsorption kinetic experiment, equilibrium binding experiment, selectivity evaluation and competitive adsorption tests. The theoretical maximum adsorption capacity of the MMIPMs (15.45 mg g-1) was greater than that of the raw biochar (2.10 mg g-1) and non-imprinted biochar composite microspheres (3.39 mg g-1) for tetracycline. Further, the MMIPMs were used as adsorbent for magnetic solid phase extraction (SPE) for the extraction of tetracycline present in drinking water, milk, fish and chicken samples. Under optimal conditions, the results showed good recovery yield ranging from 88.41% to 106.29% with a relative standard deviation (RSD) ranging from 0.35% to 6.83%, respectively.
Assuntos
Carvão Vegetal/química , Nanopartículas de Magnetita/química , Microesferas , Absorção Fisico-Química , Compostos Férricos/química , Nanocompostos/química , Tetraciclina/química , Purificação da Água/métodosRESUMO
In this study, a surface chemical-modified rice husk biochar with abundant amino groups and disulfide bonds for the removal of cadmium was prepared using cystamine dihydrochloride as a modification ligand and glutaraldehyde as a crosslinker. The biochars were characterized by Fourier transform infrared spectrometry (FTIR), elemental analysis, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), thermogravimetry analysis (TGA), and nitrogen sorption (BET) before and after modification. The adsorption properties of the modified biochars for Cd (II) were investigated in detail via adsorption isotherm models, adsorption kinetics models, and selective adsorption experiments. The surfaces of the cystamine-modified biochars with granular nanopolymers of sufficient functional groups of primary amine and disulfide linkage rendered the biochar surface more conducive to electrostatic attraction and surface complexation. The theoretical maximum adsorption capacity of the modified biochars (81.02 mg g-1) was almost 10-fold greater than that of the raw biochars (8.347 mg g-1) for Cd (II). Besides, the cystamine-modified biochars had a better affinity for Cd (II) compared to other heavy metals (Zn, As, Cd, Co, Ni, Cr), showing six-fold greater affinity for Cd (II) than Zn2+. The results of this study indicate that the modification of biochars derived from rice husks shows great potential in the removal of Cd (II) from contaminated water.
Assuntos
Cádmio/química , Carvão Vegetal/química , Poluentes Químicos da Água/química , Purificação da Água , Cinética , Oryza/químicaRESUMO
Missing covariates often occur in biomedical studies with survival outcomes. Multiple imputation via chained equations (MICE) is a semi-parametric and flexible approach that imputes multivariate data by a series of conditional models, one for each incomplete variable. When applying MICE, practitioners tend to specify the conditional models in a simple fashion largely dictated by the software, which could lead to suboptimal results. Practical guidelines for specifying appropriate conditional models in MICE are lacking. Motivated by a study of time to hip fractures in the Women's Health Initiative Observational Study using accelerated failure time models, we propose and experiment with some rationales leading to appropriate MICE specifications. This strategy starts with specifying a joint model for the variables involved. We first derive the conditional distribution of each variable under the joint model, then approximate these conditional distributions to the extent which can be characterized by commonly used regression models. We propose to fit separate models to impute incomplete variables by the failure status, which is key to generating appropriate MICE specifications for survival outcomes. The proposed strategy can be conveniently implemented with all available imputation software that uses fully conditional specifications. Our simulation results show that some commonly used simple MICE specifications can produce suboptimal results, while those based on the proposed strategy appear to perform well and be robust toward model misspecifications. Hence, we warn against a mechanical use of MICE and suggest careful modeling of the conditional distributions of variables to ensure proper performance.
Assuntos
Modelos Estatísticos , Bioestatística , Simulação por Computador , Interpretação Estatística de Dados , Feminino , Fraturas do Quadril/epidemiologia , Humanos , Modelos Lineares , Análise Multivariada , Modelos de Riscos Proporcionais , Fatores de Risco , SoftwareRESUMO
Biochar, a sustainable sorbent derived from pyrolyzed biomass, has garnered attention for its efficacy in solid-phase extraction (SPE) of antibiotics, with a particular focus on tetracyclines (TCs). Despite its recognized potential, the intricate separation mechanisms operative in biochar-based SPE systems have not been fully deciphered. This investigation contrasts chlorella biochar against commercial bamboo biochar, harnessing an array of analytical methodologies-microstructure characterization, adsorption thermodynamics, competitive adsorption kinetics, H+ back titration, and selectivity adsorption studies-complemented by a Box-Behnken design for the optimization of chlorella/bamboo-SPE and subsequent application in the analysis of animal-derived foodstuffs. The study unveils that a hybrid sorbent, integrating nitrogen-doped microporous chlorella biochar with mesoporous bamboo biochar in a 95/5 mass ratio, markedly diminishes irreversible adsorption while enhancing selectivity, surpassing the performance of single biochar SPE systems. The elucidated separation mechanisms implicate a partition model, propelled by oxygen-rich functional groups on chlorella biochar and the rapid adsorption kinetics of bamboo biochar, all orchestrated by electrostatic interactions within the mixed biochar framework. Moreover, the synergy of mixed biochar-SPE with high-performance liquid chromatography (HPLC) demonstrates exceptional proficiency in detecting TCs in animal viscera, evidenced by recovery rates spanning 80.80 % to 106.98 % and RSDs ranging from 0.24 % to 14.69 %. In essence, this research not only sheds light on the multifaceted factors influencing SPE efficiency but also propels the use of biochar towards new horizons in environmental monitoring and food safety assurance.
Assuntos
Carvão Vegetal , Chlorella , Extração em Fase Sólida , Tetraciclinas , Carvão Vegetal/química , Extração em Fase Sólida/métodos , Adsorção , Chlorella/química , Tetraciclinas/isolamento & purificação , Tetraciclinas/química , Tetraciclinas/análise , Animais , Cinética , Cromatografia Líquida de Alta Pressão/métodos , Antibacterianos/isolamento & purificação , Antibacterianos/química , TermodinâmicaRESUMO
Acute lung injury (ALI) and its severe form, acute respiratory distress syndrome (ARDS), induce high morbidity and mortality rates, which challenge the present approaches for the treatment of ALI/ARDS. The clinically used photosensitizer verteporfin (VER) exhibits great potential in the treatment of acute lung injury and acute respiratory distress syndrome (ALI/ARDS) by regulating macrophage polarization and reducing inflammation. Nevertheless, its hydrophobic characteristics, nonspecificity, and constrained bioavailability hinder its therapeutic efficacy. In this work, we developed a type of VER-cored artificial exosome (EVM), which was produced by using mesoporous silica nanoparticles (MSNs) to load VER, followed by the exocytosis of internalized VER-MSNs from mouse bone marrow-derived mesenchymal stem cells (mBMSCs) without further modification. Both in vitro and in vivo assessments confirmed the powerful anti-inflammation induced by EVM. EVM also showed significant higher accumulation to inflammatory lungs compared with healthy ones, which was beneficial to the treatment of ALI/ARDS. EVM improved pulmonary function, attenuated lung injury, and reduced mortality in ALI mice with high levels of biocompatibility, exhibiting a 5-fold higher survival rate than the control. This type of artificial exosome emitted near-infrared light in the presence of laser activation, which endowed EVM with trackable ability both in vitro and in vivo. Our work developed a type of clinically used photosensitizer-loaded artificial exosome with membrane integrity and traceability. To the best of our knowledge, this kind of intracellularly synthesized artificial exosome was developed and showed great potential in ALI/ARDS therapy.
Assuntos
Lesão Pulmonar Aguda , Exossomos , Dióxido de Silício , Animais , Lesão Pulmonar Aguda/tratamento farmacológico , Lesão Pulmonar Aguda/patologia , Lesão Pulmonar Aguda/metabolismo , Lesão Pulmonar Aguda/terapia , Camundongos , Exossomos/metabolismo , Exossomos/química , Dióxido de Silício/química , Verteporfina/farmacologia , Verteporfina/química , Verteporfina/uso terapêutico , Nanopartículas/química , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/metabolismo , Camundongos Endogâmicos C57BL , Masculino , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/química , PorosidadeRESUMO
OBJECTIVE: microRNAs are regulatory molecules regarded as important in the pathogenesis of different types of tumors. microRNA-216a (miR-216a-5p) has been identified as a tumor suppressor in multiple malignancies. However, the role of miR-216a-5p in the pathogenesis of small cell lung cancer (SCLC) remains obscure. The objective of this study was to investigate the role of the miR-216a-5p/Bcl-2 axis in SCLC pathogenesis. MATERIALS AND METHODS: All the experimental methods used were as follows: microarray analysis, cell culture, transient, and stable gene transfection; real-time fluorescence PCR; Western blot; flow cytometry for cell cycle analysis; in vitro proliferation assay; in vitro wound healing experiment; in vivo xenograft model in nude mice; and dual luciferase reporter assay. All statistical analyses were carried out using GraphPad Prism 7 software. Statistical significance was analyzed by Student's t-test or one-way ANOVA. P <0.05 (typically compared with the negative control group) was considered as significant and is marked with an asterisk in the figures. RESULTS: In this study, we observed that miR-216a-5p is downregulated in SCLC cell lines compared to that in the normal human bronchial epithelial cell line 16-HBE. In vitro and in vivo experiments demonstrate that upregulation of miR-216a-5p significantly decreased cell growth and migration and its downregulation increased SCLC cell proliferation and migration and influenced the cell cycle. Using bioinformatics analyses, we predicted that the important antiapoptotic gene Bcl-2 is targeted by miR-216a-5p, and we identified a functional miR-216a-5p binding site in the 3'-UTR of Bcl-2 using luciferase reporter assay. Furthermore, we determined that suppression of miR-216a-5p modulated the expression of Bcl-2, Bax, and Bad proteins (Bcl-2 family proteins), while Bcl-2 knockdown abrogated the effect of miR-216a-5p downregulation on cell proliferation, cell migration, and the cell cycle. CONCLUSION: Taken together, these findings suggest that miR-216a-5p regulates SCLC biology via Bcl-2 family proteins. Therefore, our study highlights the role of the miR-216a-5p/Bcl-2 axis in SCLC pathogenesis.
RESUMO
Customization design is a trend for developing a bicycle in recent years. Thus, the comfort of riding a bike is an important factor that should be paid much attention to while developing a bicycle. From the viewpoint of ergonomics, the concept of "fitting object to the human body" is designed into the bicycle frame in this study. Firstly, the important feature points of riding posture were automatically detected by the image processing method. In the measurement process, the best riding posture was identified experimentally, thus the positions of feature points and joint angles of human body were obtained. Afterwards, according to the measurement data, three key points: the handlebar, the saddle and the crank center, were identified and applied to the frame design of various bicycle types. Lastly, this study further proposed a frame size table for common bicycle types, which is helpful for the designer to design a bicycle.